My epson NX420 got a paper jam.  I got the paper out but now the ink cartridge holder will not return to the usual place so I can replace ink.  It stays stuck in the corner and lid won't open.  Ideas?

First time here; hope I'm not repeating.  Can't get my EpsonNX420 that I use with my MacBookPro to work correctly.  Had a paper jame.  Cleaned it out.  NOw the cartridge holder won't move from the corner so I can fully open it and replace ink.  Help

Call Epson.  Tech support number is inside your user manual or E-mail us for assistance.

Similar Messages

  • TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

    My iMac won't start up, or wake from sleep.  I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up.  Turning it on, you can hear the fan run, but the display stays dark.  Any ideas what to do?  Thanks!

    Mac doesn't boot
    Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
    Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
    Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
    Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
    Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
    [edit]
    What to do
    First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
    If that doesn't help continue doing the steps from below:
    1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
    2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
    3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
    4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
    5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
    6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
    7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
    7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
    8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
    8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

  • How do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

    how do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

    Photo albums are not searched by Spotlight Search.  Go to Settings > General > Spotlight Search to see and reorder the available search items.
    For more details, see page 12 of the iPad iOS 5.1 User Guide

  • I was in a group iMessage and it won't open I have done every thing I now so can somebody help, I was in a group iMessage and it won't open I have done every thing I now so can somebody help

    SO can some one help

    Well first of all this is a public forum, so keep that in mind. The users here generally can not look up your case numbers.
    If AppleCare didn't work out for you, I believe your next step is
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html
    Unfortunately, their case indexing is on a different database, and they will not be able to look up your case number either. However, their support is free, and despite it may take a few bounces of emails back and forth, there is a decent chance they may be able to get a solution.
    Or... you can still try to shoot the **** with us here, which is Ok as well. But you'll have to keep in mind we can't look up your case numbers.
    By the way, the link for a refund, I think is for the same link I just gave you, so on second though, mabye it's best to just go there.

  • My iBooks will load the sample book, but when I purchase it, it will not load the complete book

    iBooks acting up. Also, how to update to IOS?

    Hey hvs2340,
    Thanks for the question. I understand that you are experiencing an issue downloading iMovie from the Mac App Store. The following resource may provide a solution:
    Troubleshooting the Mac App Store
    http://support.apple.com/kb/TS3624
    Thanks,
    Matt M.

  • TS3274 My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

    My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?

    Has lock rotation been accidentally enabled within the control centre? If you swipe up the screen is there a circle with a lock symbol & if so is is greyed out or white - if white it is enabled.

  • My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

    My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

    Try SMC Reset (unplug it from the back of the computer for 10 seconds then plug it back. in)
    Try PRAM Reset Cmd + OPtion + P + R on start up.
    Try safe boot - hold down shift on start up.
    Try booting to install dvd (C on start up) or recovery hd (CMD + R) and using disk utility to run a verify and repair. If you still can't boot after that reinstall the operating system. If you can't find the disc or it wont boot to the disc.
    Try single mode which is cmd+S on start up. It will open with a terminal looking window in the terminal. type in /sbin/fsck -TL. If it returns *system has been modified* continue to type that command in until it comes back with macintosh hd seems to be ok. If after 5 tries it still gives you system has been modified. You may have to replace the hard drive.

  • TS3276 I just downloaded the OS X Lion mountain and Mail won't open.  I get an error message everytime I try to open the app.How can I fix that?

    I just downloaded the OS X Lion mountain and Mail won't open.  I get an error message everytime I try to open the app.How can I fix that?

    I-Photo won't open even though I have upgraded to OS X Yosemite and downloaded the I-Photo upgrader.
    But have you run the the iPhoto Library upgrader? It is installed in Applications > Utilities. Launch it and direct it to your iPhoto library.
    Which version of iPhoto did you upgrade from?
    The upgrader is only necessary, if you have been  running iPhoto7.1.2 or earlier.

  • I just received a new mac and I am trying to sync my ipod to it but everytime I try it stays stuck on the "backing up" section of the sync. I have already unauthorized my other computer like the instructions said to but that did nothing.

    I just received a new mac and I am trying to sync my ipod to it but everytime I try it stays stuck on the "backing up" section of the sync. I have already unauthorized my other computers like the instructions said to but that did nothing. Please tell me what I should do or how to back up my device.

    You are in iTunes for Windows.

  • I used a code i got with my moive to download the itunes version and i was watching the itunes extras, but now when i click on "play itunes extras" it plays the audio but the only thing it displays is the first frame (the movie is catching fire)

    i used a code i got with my moive to download the itunes version and i was watching the itunes extras, but now when i click on "play itunes extras" it plays the audio but the only thing it displays is the first frame (the movie is catching fire) i deleted the movie and reinstalled from my icloud backup and it still does the same thing. The actual movie works fine, its just the itunes extras

    Hi there MickeyDresaj,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    -Griff W. 

  • I have a program that requires cancel, details or continue. It appears to be stuck and will not let me slide to unlock or slide to close.  How do I restart the ipad?

    I have a program that requires cancel, details or continue. It appears to be stuck and will not let me slide to unlock or slide to close.  How do I restart the ipad?

    Hi there, welcome to the site,
    I have posted a link below which has instructions on how to do this. They are quite simple, so take a look.
    iPad not responding
    Regards,
    Nathan

  • After updating to yosemite aperture, pages, keynote and numbers won't open. tried to update via app store and it says apps not authorised on this account. apps were bought with the mac and have never missed an update before so why now?

    afyer updating to yosemite aperture, pages, numbers and keynote won't open
    i have tried updating them via app store only be told they aren't authorised on this account, they were bought and installed with this mac and there has never been a problem updating before so why now?
    this is the fourth time i have had to type this question out. what a terrible lay out for a support section!

    this is the fourth time i have had to type this question out. what a terrible lay out for a support section!
    You aren't likely to get an answer with that type of attitude. BTW, you are not contacting Apple on these forums. We are all volunteer end users just like you. If you want support, then call AppleCare and you can get one-on-one assistance.

  • I have a copy of the original adobe illustrator and it won't open

    I have a copy of the original adobe illustrator and it won't open.  I will start to open and it kina freezes and then I have to force it to close.  My photoshop of the same age will open and work but I also still have to force close it.  I don't have the money to update and these older versions work fine for me what do I need to do to keep them working???

    I have windows 7  and OSX for the original adobe suit CS
    CS is CS1?
    That's many years before Windows 7.
    Which Mac OS is it? CS won't run on anything beyond 10.6 (maybe even earlier)

  • I installed creative cloud to my desktop and it won't open. The icon bounces but nothing happens, I tried uninstalling and reinstalling but I think I screwed it up more. Please help!

    I installed creative cloud to my desktop and it won't open. The icon bounces but nothing happens, I tried uninstalling and reinstalling but I think I screwed it up more. Please help!

    Dd7 do you receive any specific error messages?  What version of Mac OS are you using?

  • HT1578 I've done all of this and it won't open. I double click on it, the default program to open it is diskimagemounter and nothing happens when I double click. Any ideas? (Mac OS X Lion 10.7.4)

    I've done all of this and it won't open. I double click on it, the default program to open it is diskimagemounter and nothing happens when I double click. Any ideas? (Mac OS X Lion 10.7.4)

    I would like to create a file that stores my documents and has a password on it so that if I lend my laptop to someone, they can't access my documents. I went into utilities and followed his instructions to do that. I created it on my desktop and its a .dmg extension

Maybe you are looking for