My Epson RX800FW has stopped working

and has a message, "A printer error has occurred. Turn off your printer and turn it on again. See your documentation". I have done all of the requests, there is nothing of any use in my documentation. please help!

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Is the printer attached to the computer or is it a network printer?

Similar Messages

My Epson Printer has stopped working with my Mac Air

I have asked Epson for support but they keep telling me the obvious about deleting the printer via settings and reinstalling again. There have been several updates from Epson at the same time so there is obviously a problem but this is getting ridiculous now. Has anyone had the same problem and how have you sorted it out.
My Epson is Office Stylus BX635FWD.
Thanks

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Is the printer attached to the computer or is it a network printer?

**Bridge Has stopped working

I'm having a problem with my Bridge. As soon as I attempt to open I recieve an Error message "Adobe Bridge has stopped working" (it won't even open). I'm running Vista and I've never had this problem. I recently added a printer drive for Epson r-1800. Has anyone had this problem before.

you should probably check in the bridge forum...
http://www.adobeforums.com/cgi-bin/webx?14@@.3bb8a3bf

My Photoshop 9 Stopped working I get the message "Elements 9 Organizer has stopped working"

My photoshop 9 program stopped working after using Adobe Premiere 9 to generate a slide show using Adobe Photoshop 9 organizer to place photos. The program crashed as I was attempting to burn a DVD. After this happened, I no longer could access the organizer in Photoshop 9. I get the message "Elements 9 organizer has stopped working" " A problem caused the program to stop working correctly, windows will close the program and notify you of a solution is found"
I tried unistalling Photoshop 9 and the problem remains.

Thanks for your suggestion. I checked the Epson web site and also their technical help, they gave me their latest driver (which didn't work) but also said there were some issues with Apple's Mavericks (OS X 10.9.4) and said I should get back to Apple. Not sure were this leaves me with Adobe Elements though - perhaps I should reinstall? Thanks again for your suggestion.

After update my epson scanner software stopped working

After update my epson scanner software stopped working
In Image Capture, when scannig i have this bug
https://dl.dropboxusercontent.com/u/733136/scan%20bug.mov
Can someone please test this
Thanks
Pedro Molinar

The Billions colors options creates a Tiff file , the Millions creates a Jpeg.
the Tiff has worst quality and a bigger size

Plug-in container has stopped working. No printing from web

Went to print a receipt from a web page and got firefox 'not responding'. Then error message after I click to close..."plug-in container has stopped working". I have reset ff, i have uninstalled and reinstalled. flash is up to date. I have EWPS plug in (I have an epson printer) and E web page plug in.
When I checked in my pc for the ewps, it doesn't open but says it needs plug in container and to re download e-web print. did that. No better.
Not an epson issue as other stuff prints.
Please help
thanks

I'm trying to figure out what plugin(s) the problem page is using.
Are there other pages on the site (same host name, e.g., www.example.com) that do not lock up Firefox? If so, please open one of those pages and then switch all the plugins to "Ask to Activate" for the site. Here's what I mean:
Click the padlock or globe in the address bar and then click "More Information". At the top of the Page Info dialog, click Permissions. Then, in the plugins section, click "Always Ask" for each one and close the dialog.
The next time you visit the problem page, Firefox should show a bar telling you which plugin needs to be activated. Actually, this might not kick in until after you exit and start Firefox up again.

Itunes wont open and gives me a message saying "Itunes has stopped working". What can I do to fix this?

I use windows vista and I have upgraded my itunes. Now when I open it, it gives me a message saying "itunes has stopped working" and then gives me a message saying it will notify me for a solution. What can I do to fix this so it can open and not give me any more problems???

First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)!

Mozalloc.dll A firefox plug in container has stopped working. I can't get firefox to work for more than 2 mins. before crashing. How do I make this stop?

AdapterDeviceID: 0x9712
AdapterDriverVersion: 8.861.1.2000
AdapterSubsysID: 164c103c
AdapterVendorID: 0x1002
Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
AvailablePageFile: 13967405056
AvailablePhysicalMemory: 6222434304
AvailableVirtualMemory: 3783245824
BIOS_Manufacturer: Hewlett-Packard
BlockedDllList:
BreakpadReserveAddress: 46661632
BreakpadReserveSize: 41943040
BuildID: 20141113143407
CrashTime: 1417153956
EMCheckCompatibility: true
EventLoopNestingLevel: 1
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1416895140
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 175
StartupTime: 1417153798
SystemMemoryUsePercentage: 25
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 16630353920
TotalPhysicalMemory: 8316153856
TotalVirtualMemory: 4294836224
URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
Vendor: Mozilla
Version: 33.1.1
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 :
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP TCP Service Provider : 2 : 1 :
RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 2 : 2 :
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.
AND:
A plugin container for firefox has stopped working.
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 33.1.1.5430
Application Timestamp: 54656826
Fault Module Name: mozalloc.dll
Fault Module Version: 33.1.1.5430
Fault Module Timestamp: 54654321
Exception Code: 80000003
Exception Offset: 00001425
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7. Message shows that iTunes has stopped working. This happens every time. I have updated iTunes Software. Will not solve the problem. What is wrong

I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
          iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
          "Check online for a solution and close the program"
          "Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
     Here are some of the Problem Details:
     "Problem signature: APPCRASH
     Application Name:     iTunes.exe
     Application Version: 11.0.1.12
     Application Timestamp: 50c8fc7e"

I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony

Can't get itunes. I get the following message when I click on either the shortcut or the program. It says ITunes has stopped working and I can either check on line for a solution and close the program or just close the program.

When I click on the itunes shortcut or the program I get the following message:
ITunes has stopped working. My two options are: Windows can check on line for a solution to the problem or close the program.
It seems that my entire library is not there. If I sync my ipod will it add it back into my library on the computer?
I've even tried installing again and nothing works. Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
Thanks

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

ITunes 10.3.1 has stopped working in Windows 7 64bit

I just upgraded to Windows 7 64 bit and I downloaded iTunes 10.3.1 for Windows 7 64 bit. My Quicktime player is working fine but everytime i tried to open iTunes, it gives me an error message that says iTunes has stopped working. I need help trying to fix this, I already tried uninstalling, re-installing, and mostly every suggestion in the Apple support forum and it still does not work.
This is the information I have on the Problem Details:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Try copying the QTMovieWin.dll in the c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.

ITunes has stopped working ...Running Windows 7(64)

I upgraded my home PC Desktop to Windows 7 earlier this year and had no trouble bringing over iTunes from my previous platform (Windows XP).
I recently returned home to the US from a work assignment out of the country and because my iTunes resides on my home PC desktop, I didn't open up iTunes for the past 6 weeks. During this time Apple released iTunes 10.5. When I returned home, the old version of iTunes was still working. However, when I upgraded to iTunes 10.5, iTunes stopped working. The error message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
I have worked through the following knowlege bulletins (nothing has fixed my problem):
(a)" iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues"
(b) "iTunes: Troubleshooting issues with third-party iTunes plug-ins"
(c) "iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio"
(d) "Removing and reinstalling iTunes, QuickTime, and other software components for Windows vista or Windows 7"
(e) "iTunes for Windows: system restarts, blue screen, or quits unexpectedly when accessing iTunes Store"
the last bulletin (e), recommended ensuring that my drivers were up-to-date. So I also updated my drivers.
Lastly, I contacted iTunes Store Customer Support (although my problem isn't with the store, it is upgraded iTunes running on windows 7). They told me the issue was "outside (their) expertise" and recommended I look at this discussion board.
Here is the information I found under Event Viewer:
==================================================================
Log Name:      Application
Source:        Application Error
Date:          11/27/2011 11:46:01 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Theresa-HP
Description:
Faulting application name: iTunes.exe, version: 10.5.1.42, time stamp: 0x4ebf7d7c
Faulting module name: MSVCR80.dll, version: 8.0.50727.6195, time stamp: 0x4dcddbf3
Exception code: 0xc000000d
Fault offset: 0x00026b72
Faulting process id: 0x13b0
Faulting application start time: 0x01ccad3d27f6b2ff
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d 09154e044272b9a\MSVCR80.dll
Report Id: 6ef58025-1930-11e1-a798-e06995d0a503
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-11-27T19:46:01.000000000Z" />
    <EventRecordID>9927</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Theresa-HP</Computer>
    <Security />
</System>
<EventData>
    <Data>iTunes.exe</Data>
    <Data>10.5.1.42</Data>
    <Data>4ebf7d7c</Data>
    <Data>MSVCR80.dll</Data>
    <Data>8.0.50727.6195</Data>
    <Data>4dcddbf3</Data>
    <Data>c000000d</Data>
    <Data>00026b72</Data>
    <Data>13b0</Data>
    <Data>01ccad3d27f6b2ff</Data>
    <Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
    <Data>C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_ none_d09154e044272b9a\MSVCR80.dll</Data>
    <Data>6ef58025-1930-11e1-a798-e06995d0a503</Data>
</EventData>
</Event>
==================================================================
It seems that I am not alone in having this problem! Are there any experts out there who want to earn the undying gratitude of the technically challenged (or a few expert points?)
Thanks for listening,
Theresa
PS - someone recommended uninstalling Apple Quick Time Player. I don't have Quick Time Player.

I had the same problem. I'm using 64bit Windows7. This solution only partially worked for me. I still couldn't connect to the iTunes store.
The following solution worked for me:
COPY    QTMovieWin.dll
FROM    c:\program files (x86)\common files\apple\apple application support\
INTO     c:\program files (x86)/iTunes

Adobe Acrobat XI Pro causes an error when starting it - Adobe Acrobat has stopped working. How do I resolve this?

I've had Adobe Acrobat XI Pro for some time, but yesterday it stopped working and I started having an 'Adobe Acrobat has stopped working' error. It then tells me to Close the Program.
How do I resolve this?
Thanks and regards
Roxanne

Thanks Pat. I was able to resolve the problem.
OS is Windows 7 Pro, Adobe Acrobat Pro 11.0.07.
I went into the Properties file where I identified that Users only had Read & Execute and Read properties, I changed properties for Everyone to Full Control. That fixed the problem.
I don't know how the properties got changed to just Read & Execute, but there had been an automatic update the night before.
Regards
Roxanne

Adobe Bridge CC has stopped working -again

After many months of pain caused by Bridge CC not working it seemed to be cleared up in Sept '14. (I used just about every fix that was suggested incl. preferences changed to have no program load on startup, managing cache, etc.) I has been working flawlessly until today. My pc notified re: windows updates were ready to install. I cleaned my pc, closed all programs and installed 23 updates. (Win7, 64bit) Updates seemed to install cleanly but Bridge CC will not open and displays a white screen and the msg "Adobe Bridge CC has stopped working" This began immediately after the os updates were installed so I suspected that was the issue. I restored the pc to before the updates and CC will still not open (stopped) and in desperation I tried Bridge CS6. CS6 opened normally and I was able to open a folder. Touching the space bar should have opened the selected file to full screen image but instead I got the same error msg now saying Adobe Bridge CS6 has stopped working. I have the same programs on my laptop and CC opens and works properly. So that sounds like my pc and not Bridge is the problem but there is an incompatibility somewhere and I am stuck and my work is piling up as I speak. I need my bridge back!

This problem has been solved by Microsoft, rebuilt Win7. I would like to delete my question to reduce clutter here but I don't know how to delete it. A moderator may delete this if they wish or someone can add to my reply and instruct me. Thanks!

My Epson RX800FW has stopped working

Similar Messages

Maybe you are looking for