My Epson scanner recognizes I am trying to scan a slide ...

My Epson scanner recognizes I am trying to scan a slide, but it scans the slide holder instead of scanning the actual slide.  How can I fix this?

Hello sharon139.
In Safari, click on Safari in the upper left of your screen and then click on Preferences.  Go to the Security tab...... see below.  Select either Never or From third parties......   That should do it.

Similar Messages

  • HP Photosmart 7520 does not recognize computer when trying to scan.

    I have went thru the wireless setup on the printer, have done the steps recommended for other similair posts, printer will scan when initiated by paint, but does not find computer when accessing from printer screen. Computer and printer are connected and wireless network test results are all good. I've run out of ideas. Please help.

    I  have the same problem on my photosmart 5510dB111 
    i cannot print any of my apps when i initiate the process
    they print all right fom hp. i have crossword puzzles printed everyday at the time they are scherduled.Sa
    Sansal 5

  • I upgraded to 10.8.4 and now it won't let me use my Epson scanner, saying "power pc applications are no longer supported." How do I make it work?

    I upgraded to 10.8.4 and now I can' use my Epson scanner  I get a message saying, "ou can't open the application Epson Scan apps because Power PC applications are no longer supported." I also can't synch my old Palm Pilot for the same reason.
    How can I fix this?

    We need to sort out some facts here first:
    •  You cannot be running Mt. Lion on your iMac G5.  What Mac is it?  What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
    •  What is the model of your Epson Scanner?
    •  Have you attempted to scan using Image Capture, located in your Applications folder?
    •  Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
    1)  partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
    2)  install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
                                  [click on image to enlarge]

  • Have an error message when trying to scan photos

    I get the following message when scanning using Element 6:
    Failed to obtain files from device.  The file size exceeds the maximum size allowed.  To decrease the file size, ry reducing the image resolution or dimensions.
    Do I need to get a higher resolution scanner?  I'm trying to scan a picture at 1200 pixel.
    thanks

    Are you scanning into the pse 6 organizer?
    MTSTUNER

  • Why does Image Capture stop recognizing Epson scanner after scanning several images? I have to stop and start the scanner in order for Image Capture to recognize it again.

    Why does Image Capture stop recognizing Epson scanner after scanning several images? I have to stop and start the scanner in order for Image Capture to recognize it again.

    Karen ...
    Might be corrupted preferences (.plist)
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.image_Capture.plist
    Click Go then move the com.apple.image_Capture.plist file to the Trash.
    Restart your Mac and your scanner and try scanning an image.

  • How to get PE6 to recognize Epson scanner again?

    Another forum told me the solution to having bogus empty folders appear in my Library Preferences folder daily was to trash the TWAIN for my Epson Perfection 1240U scanner. They said it wasn't needed anyway. Well, they were right about the solving the Epson bug. But they were wrong about it not being needed! The scanner no longer worked. I downloaded the correct driver and TWAIN again from Epson and reinstalled, twice. It never appears in Elements when I go to Import - where it used to - along with 2 PICT sources and Frame from Video. I can't seem to find where the installer put the driver and TWAIN or where that folder is in Elements with the four files in it.
    I can use the Epson Scan software separately but have to go thru many more steps now to find the scanned (numbered) image and then process it in Elements 6. How do I get it to appear at Imports in Elements 6 again as it used to before this debacle?  Not getting much help from Epson.

    Is anyone going to assist me on this?  I have now spent hours on the phone to both Epson and Adobe support with no results. Neither one seems able to tell me exactly WHERE Epson installs the TWAIN and where the Elements IMPORT folder is - so I can put all the software together and hope it works again! (My searches cannot find either.)  I have established that although Elements 6 will not recognize the Epson scanner in IMPORTS on either of my Macs it will recognize it in Elements 3, which I upgraded from a year ago. But after the upgrade to 6 it worked fine until I was foolishly instructed to trash the TWAIN. So it appears to be a bug between v. 3 and v.6 and perhaps the latest upgrade to Leopard.

  • Photoshop elements 13 doesn't recognize my Epson scanner

    I have a Epson Workfoce 545 wireless printer/fax/scanner and newly installed Elements 13 doesn't recognize the scanner.  Do any of you in this community have a suggestion? 

    The scanner is NOT present in the network.  The "all in one printer" that the scanner is a part of  is listed, however.
    Dave
           From: bridge_mastero <[email protected]>
    To: David Gross <[email protected]>
    Sent: Wednesday, February 18, 2015 9:09 AM
    Subject:  Photoshop elements 13 doesn't recognize my Epson scanner
    Photoshop elements 13 doesn't recognize my Epson scanner
    created by bridge_mastero in Photoshop Elements - View the full discussionHi ,   Please see in network that your scanner is present in the network list or not ?type Network on file explorer.  https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-7206081-729762/900-234/networ k.png  If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7206081#7206081 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7206081#7206081 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • JUst installed OS10 maverick. Got updated epson scanner software. update refused opening saying third party could not be opened. same thing when trying to open grab tif file in photoshop. any ideas?gr

    Just installed maverick. dowmloaded updated drivers for epson scanner. could not open download. got message would not open because third party file. Also tried to open grab tif file in photoshop. also denied as third party file. Any ideas?

    dmartinnyc wrote:
    Just installed maverick. dowmloaded updated drivers for epson scanner. could not open download. got message would not open because third party file.
    If you are trying to install the updated Epson scanner driver when you get this message, it will be due to the installer not being digitally signed - which is odd if it is an updated driver. To get past this block, which is a function of Gatekeeper, hold down the Control button and click the installer. A pop-up window will appear. Select Open from the menu. You will now get the option to install the driver software.

  • I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detect

    I installed OS X Mavericks and now my Epson Scanner Perfection Series V330 Photo refuses to open. Is there a new driver available? I am scanning my work for a book publication and I need my scanner urgently. I tried Image capture but scanner is not detected.

    Looks like all Epson scanners will fail under Mvrx. And who knows when an updated driver will be available. It's not as if they have had a while to do it already.
    After I noticed mine wouldn't work, I deleted my Workforce 610 and re-added it by pressing the + and instead of going for the IP versions that may pop up, that they say to do under normal conditions, select the Bonjour version. When you select the new printer/scanner in the Printers & Scanners Control Panel, then open the control window and then look in the dock and see if your printer is there. Right click on it and go to "Keep in Dock" for easy Access. In the printer panel there should be a little picture of a scanner on the right side. Click on it or type Commmand-3 and the built-in scanner software/utility will come up. After playing with it I think it's better than and there are some cool features that are not in the stock Epson software.
    Hope this helps.

  • Epson scanner and image capture: blank white image

    I've been trying to make an epson perfection 1670 scanner work on an iMac running 10.6.4
    Since epson no longer specifically supports this model I am going to Image Capture and the epson drivers supplied by Apple. I have downloaded/installed the updated drivers twice (once via software update and once manually from apple support).
    I can get image capture to recognize the scanner and perform preview and full scans.
    The frustrating thing is that the image generated is completely blank; a white page. I have tried using the scanner and image capture on two other mac's (macBook pro, macBook) both running 10.6.4 and both of these produce the same white page (although they do recognize the scanner).
    I thought the scanner may have finally broken so i tested it on another (old) iMac G3 running os x 10.4.11 and epson's scanning utility; it worked fine and made a nice scan.
    I have tried to get epson's scanning utility to work under 10.6.4 by reinstalling it; I can get it to startup and run the scanner but it too produces a blank white image!
    I conclude there is some basic software incompatibility between the drivers and os x 10.6.4. Its odd that the drivers and image capture can run the scanner but cannot send an image to the computer.
    The epson driver in the latest apple update is version 5.2.5 (Copyright 2003 ???) while the latest driver on the epson site (for image capture) is 5.3. Tried to download the epson driver and got file not found (*!%#?&).
    done what I can; any suggestions?

    I had the same problem with my Epson 1260 scanner. The "updated" drivers provided by both Apple and Epson produced the exact same result - blank white pages, or if anything showed up at all, it would be all chopped up and skewed, like it had gone through a shredder. Trying to adjust the brightness and other slider settings made no difference.
    After wrestling with it for a week, I finally found a solution. First make sure Rosetta is installed. Use the old PowerPC Epson TWAIN driver from 2003; with the filename EPSON TWAIN 5.ds. Put it in the folder /Library/Image Capture/TWAIN Data Sources/.
    Then, don't use Image Capture. Download Graphic Converter. Set it to open in Rosetta mode. Then you can use Graphic Converter's File -> Acquire -> TWAIN Acquire... menu command to scan using the old EPSON TWAIN driver.

  • Compatibility of epson scanner w/ intel imac

    I have 2 new intel imacs, as well as a G4 imac. I'm trying to connect my new Epson scanner (Perfection 4990 Photo). When installing the software, it is looking for a classic environment. The online drivers from Epson's website seem to be for v10.4.4, and I'm running 10.4.10. Does anyone know whether this Epson scanner is just plain incompatible with the intel steel imacs? I have tried to contact Epson in various ways, all with no success. I'm a graphic designer and have previously had success w/ Epson scanners, but I'm tearing my hair out and ready to pack it up and return it for another brand. Their lack of support is outrageous. Does anyone share this experience or have any advice??? I'd appreciate it.

    What do you mean that it is looking for the classic environment?
    Are you able to open the .dmg successfully?
    BTW, this is the discussion area for the much older iMac G3 CRT. You should post future questions in the Intel iMac discussion area.

  • Microsoft problem in image aquisition from Epson scanner

    I cannot get my Epson Perfection 3200 Photo to scan even using its own Epson Scan program. I always used Photoshop 7 to scan and import the images easily. Then we moved to a new house, and when I went to reconnect everything, Microsoft doesn't recognize the Epson scanner no matter what I do. Epson technicians were not able to help. I believe that it's a Microsoft acquisition problem. It says "Could not open the TWAIN source". Should I just remove everything that has to do with Epson, even the plug-in in Photoshop, then recalibrate my monitor and reload Epson after that? --thank you, L Williamson

    Re-installing is the first step, make sure after the un-install that you remove any vestiges of the install left over. Disconnect the scanner while doing this. After you are finished, shut off the computer, re-connect and start the scanner, start the computer again and let Windows find it and then install the latest software for the scanner.

  • Wish to purchase v600 epson scanner have heard conflicting opions on how to install.. use software cd that comes with scanner or use outside software lie nuvue

    wish to purchase v600 epson scanner  for my mac.. have heard conflicting  opinions on install..  use scanner's software cd or use outside software like nuvue ???

    Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change. 
    I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
    for her (using Linux) and...
    got a new error code. Darn I was so sure I had found a clever solution this time lol.
    Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
    first so I could put them back if needed) to her new PC and the PC would not boot. 
    It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll. 
    ntdll.dll however seems necessary for Win7 to boot.
    So what I am wondering now is:
    Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
    the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
    dll's  path to the files it needs? 
    Willing to try any other options or settings you may have come up with as well.
    Thanks again for your reply and my apologies for not answering sooner.

  • How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?

    How do I get an epson scanner 1680 to work with photoshop cs4 on an iMac running 10.7.5?

    I've tried updating with the USB cord, updating wirelessly, downloading the drivers manually, installing them manually and every concieveable combination of the above. This is getting extremely frustrating and i'm ready to toss this macbook into a wall.
    TLDR;
    This is my first experience with a macbook and so far i'm finding the whole experience extremely difficult and disapointing. I felt that because of the hype, that macs were top of the line but i'm seriously considering ditching the mac and heading back to pc if this issue can't be resolved.

  • Can't install epson scanner

    I'm new to the mac. Have a nice new mac pro but one problem. I can't install my epson scanner. In checking for driver for the mac from epson the only one they currently have is a beta version which even they acknowledge has a lot of glitches. So I clearly do not want to muck up a new mac with a junky piece of software.
    I can think of no way around this. Anyone have any ideas?
    Scanner is an Epson Perfection 1640SU model.
    Thanks,
    Ann

    About install of scanner. I wrote my question about installing it. Fiddled around with it one more time. It didn't work, I was disgusted. Shut down the computer and went shopping.
    Came home, turned on the computer, and lo and behold, up pops a window indicating that the scanner was ready to scan.
    And---it was. Works fine.
    Maybe, not sure but maybe, once the driver is installed you need to re-boot the computer. It might be worth trying to see if that's the deal with this thing. No guarantees, of course, mine was just a lucky happenstance.

Maybe you are looking for