My Essbase db corrupting when i terminate the calc script why?

Hi All,
i got the problem with essbase db..It is corrupting the data when i terminating the any running calc script.
So that every time i m taking the back up for that...
Please let me know how to avoid this...and why it is corrupting ?...
Is anything wrong with my Essbase?
Regards,
Prabhas

If by "corrupting" you mean that essbase crashes and you can't restart the db then yes this is unusual and something is wrong with the environment. On the other hand, if you mean that the data is not the same as it was prior to starting the script then no there is nothing wrong. Essbase does not have a rollback feature that undo's the calc script processed up to the point where you killed it.
Dave

Similar Messages

Iphone camera effects display in photo album but disappear when you open the photo itself. why is this ?

iphone camera effects display in photo album but disappear when you open the photo itself. why is this ?

Hi Cyclosaurus,
Thank you for your reply. Sorry to bug you again but can I ask some further questions? Pls excuse my lack of knowledge on these things.
In relation to your points:
1) In the ftp publishing settings, public_html is acutal in where it says "site name", where it says "URL" I have http://www.gippmed.com. I was advised to put public_html in "site name" from my hosting. If I put anything else it publishes the entire site to a folder with that name on the server and is not viewable online?
2) I have removed the spaces in the album page name and will reupload soon. In relation to the image file names, am I correct in saying that iweb is naming them from the captions? Do you really have to use one word captions or use underscores, it looks a little odd? I have read troubleshooting articles about iweb and spaces and it also recommends similar as you are, suggesting that all page names should have underscore instead of spaces. Problem is, if for example I change the page name "About Me" to "About_Me" iweb automatically changes it in the navigation menu and this looks silly to have undescores in the Nav Menu. Is there a way around this?
Lastly, a new problem that I have never had before:
Previously, iweb would remember what I had published and only publish new site changes. Now, every time I turn my computer off and on, I open iweb and it doesn't recognise any of the previous publishing, ie it republishes the entire site.
Thank you again for your help

When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ?

When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ? Use the same printer with a PC and printed the same picture files- they are printed with high quality- Why can't the IMAC do the same?

Does this involve iPhoto for the Mac?
How exactly are you printing these photos?
LN

What is the procedure/code in VBA for passing the calc scripts dynamically based on the selection.

Hello Gurus,
I want to know what is the procedure/code in VBA for passing the calc scripts dynamically based on the selection.
For example:
X=EssVCalculate("Sheetname","Calc_Script name",True)
In the above code instead of the *"Calc_Script name"* I want a script which is called dynamically and the values are calculated accordingly.
Thanks in advance
Saurabh

Hi Todd,
This is the situation:
I have a calc script in Essbase which I can call to perform the calculations on the current sheet that is retrieved. I want calculation for the following formulas:
x = EssVCalculate("Sheet2", "CalcBC", False)
CalcBC is my calc script which is present in Essbase
So instead of passing the above script I want to pass the conditions dynamically in the VBA code . I don't want to mention the script name directly in EssVCalculate option
For example:
I have three drop down menus from which I would select three different( zero level )members. It would then retrieve the data for that particular values in the excel sheet and now when I click on Calculate button it should calculate the script dynamically.
I don't know how calc scripts can be executed dynamically in the VBA code itself.
Thanks in Advance
Saurabh

Can not run the calc scripts by mxl, if the first character is Number

I found that if you create the calc scrpt like 1abc.csc. You can not run it by mxl. I tried for times but do not know the reason for that. I found that you can use number in the name of the calc scripts(like abc1.csc, a1bc.csc), but not for the first character(like 1abc.csc).
Below is my mxl scripts:
×××××××××××××××××××××××××××××××××××
login admin identified by password on localhost;
spool on to 'C:\abc.log' ;
execute calculation sample.basic.1abc;
spool off;
logout;
×××××××××××××××××××××××××××××××××××
I write a bat file below:
×××××××××××××××××××××××××××××××××××
D:\Hyperion\AnalyticServices\bin\essmsh C:\abc.mxl
×××××××××××××××××××××××××××××××××××
I can run the scripts if I change the name "1abc" to "abc1"or "a1bc".
Of course I can run this calc in EAS, no matter the name is "1abc" or "abc1".
Anybody find the same problem with me?

I agree, if ever there was a "best practice" to developing scripts (especially when using variables) it is to enclose in single quotes. I actually use double quote, single quote.
execute calculation "'$4'"."'$5'"."'$6'";

Why does the calc script screen freezes after executing the script

Hello Everyone:
When a calc script gets executed, the calc Script in the ASS freezes even though the calc script has finished it´s execution. Does anybody knows why? How can i prevent these to happen?
Hope someone could help me, thanks in advanced
Best Regards

if you execute the calc script in foreground, console will freezes and it will not allow any thing to do.
Once script is completed, console will be freed.
You can execute the calc script in back ground so that you can continue your work and you can track the progress in the sessions.

I have compiler error when i run the ant script

Hi
Iam a beginner working with ant...When I run the script I get the following error...let me know if you have any suggestions....
build:
[javac] Compiling 28 source files to C:\finaltrial\classes
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[javac] Compiling 186 source files to C:\finaltrial\classes
[javac] error: error reading C:\finaltrial\classes\trial\impl\ru
ntime\AbstractUnmarshallingEventHandlerImpl.class; error in opening zip file
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[javac] 1 error
Thanks in advance..

that's not an error, it's a warning.
See the documentation on what causes that warning, it'll be an eye opener about the new language features introduced something like 2 years ago.

Objects in different layers changed position when i opened the project file, why? Can i fix this in a non painful and quick way?

Im making a frame-by-frame animation and today when i opened my project som objects had changed position while others didn't. This countinues throughout the whole timeline and sometimes they change position.
Here is before:
Here is after:
I think it has something to do with me changing the documents size. But it didnt happen yesterday when i did the change, only today when i opened the file again, and i cant change it back and make things right again.
If someone knows what happened and if i can fix this it would mean A LOT to me.

There is really no way around backing up your files regularly.
Flash is sadly not the most stable program.
Make it a habit to save a new version every half an hour or so, that will diminish your losses.
Consider it a "warning shot" and consider yourself lucky that you didn`t get the infamous "flash couldn`t open file" message ;-)

When doing facetime the reciever cant hear me. Only when I turn the camera around why?

I need help. Recently when doing facetime the other person can't hear me. The only way they can hear me is if I swithch to the back camera. This is not normal.

Hi Krokii!
Here is an article that will help you troubleshoot this issue with your iPhone’s microphone:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Why did my calendar clear when I installed the beta and why can I not add events?

I downloaded and installed the latest beta version of Thunderbird and when I did, my entire calendar of events and appointments disappeared and I cannot add anything to the calendar.
I do not like this beta version and want to restore the previous version that worked just fine.

Every version of Thunderbird has a matching version of Lightning. The calendar is blank because you did not upgrade Lightning when you loaded the beta Thunderbird.
The Lightning versions are here. Get the two software's to match and your events will load back up.
https://addons.mozilla.org/en-US/thunderbird/addon/lightning/versions/

Lately, when I get the "Unresponsive Script" message, Neither the cancel nor the complete script button will work and Firefox hangs so I have to Force Quit Firefox. What is wrong?

Here is the link below the message about the unresponsive script:
Script: chrome://browser/content/tabbrowser.xml:554
Neither of the buttons will work "Stop Script" or "Continue" and since Firefox is frozen or just hanging, I have to Force Quit. Today I was trying to print off a confirmation for a convention and every time I was ready to print, the Unresponsive Script would show up and freeze the printing too. After 4 times, I finally made a Grab Shot of it to print.

ive also repaired disk permissions using disk utility and disk warrior.

Fixing the calc script in FDM Planning adaptor

Hi All,
I have run into a issue with the load action in the planning adaptor ES9x-G4-A. By default, when the adaptor loads data into essbase it fixes using the script
                                   '*** CALC SCRIPT ***
                                        'NOTE: CALC SCRIPT CAN BE MODIFIED For Each CUSTOMER
                                        'Clear the intersection of (Category, Period, Entity)
                                        strClear = "Fix(""" & strTCat & """,@Idescendants(""" & strCurEnt & """))" & vbcrlf
                                        strClear = strClear & "CLEARDATA """ & strTPer(0) & """;" & vbcrlf
                                        strClear = strClear & "EndFix"
The issue with this is that it doesn't fix on year, meaning that data loaded with a replace will wipe the same period across every year. Does anyone know what the year variable is to set the fix correctly? I can't find it in any of the documentation, for 9.3.1 or 9.2
Thanks.
KMacintosh

Hi,
{color:#000000}Try updating the load script to be :-
{color}{color:#ff0000}strTargYear = API.POVMgr.fPeriodKey(CStr(strPer(0))).strTargetYear
'*** CALC SCRIPT ***
'NOTE: CALC SCRIPT CAN BE MODIFIED For Each CUSTOMER
'Clear the intersection of (Category, Period, Entity)
strClear = "Fix(""" & strTargYear & """,""" & strTCat & """,@Idescendants(""" & strCurEnt & """))" & vbcrlf
strClear = strClear & "CLEARDATA """ & strTper(0) & """;" & vbcrlf
strClear = strClear & "EndFix"
Cheers
John
[http://john-goodwin.blogspot.com/]{color}

Using VB API in VBA to edit the Calc Scripts

Guys,
Does anyone of you have VBA source code/examples utilizing Essbase API for the following operation.
I want to copy Calc Script from Server to the client, edit the Script using VBA and copy back the Script to the Server. Any kind of info is appreciated.
Thanks in advance
HYPuser

I posted some real sample code a while back for a completely different function (member renames).
Renaming Existing Member Names
So while you'll have to write the calc modification code yourself (or ask Glenn his rate ;-)), this at least shows you how the initialization / login / termination of the API would work. That's probably the most confusing aspect of using the VB API for the first time anyway.
All that said, if this is from Excel and the user will already be logged in via the Excel Add-In, I believe that you can make life much easier and grab the hCtx directly without any initialization / login/ termination worries. I probably should have done that myself in the example I gave. See Tim Tow's posts in this thread:
API
EDIT: Two things I just noticed - first, the code sample I gave even has an example of polling for ProcState, so that gets you closer than I thought! Second, remembered that the line that reads...
While ProcState.State ESB_STATE_DONE
...should actually have a 'less than / greater than' symbol between ProcState.State and ESB_STATE_DONE. Can't get the forum to display them correctly, even in code tags...
Edited by: TimG on May 16, 2011 2:55 PM

Will block size effect the calc script performance?

Hi Experts,
I have a cube called RCI_LA:RCI_LA, now I have created calc scripts and working fine. But those calc scripts are taking too much time than expected (normally it should not take more than 15 min but those are taking nearly 1 hr or more some calc scripts.)
In database properties I found that block size is 155896 B i.e. 152.KB but this size should be 8 to 100 KB & Block density is 0.72%
If block size exceeds more than 100 KB will it impact the performance of Calc scripts?
I think answer to the above question is “yes”. In this case what should I need to do to improve calc scripts performance?
Could you please share your experience here with me to come out of this problem?
Thanks in advance.
Ram

I believe Sandeep was trying to say "Dynamic" rather than "Intelligent".
The ideal block size is a factor in all calcs, but the contributing reasons are many (The main three are CPU caching, Data I/O overhead, Index I/O overhead).
Generally speaking, the ideal block size is achieved when you can minimize the combination of Data I/O overhead and Index I/O overhead. For this reason a block size that is too large will incur too much Data I/O, while a block size that is too small will incur too much Index I/O. If your Index file is small, increasing your block size may help, although the commonly acceptible block size is between 8K and 64K in size, this is just a guideline.
In other words, if you test it with something right in the middle and your index file is tiny, you might want to test it with a smaller block size. If your index file is very large (i.e. 400 MB or more), you may want to increase the block size and retest.
Ways to increase/decrease it are also many. Obviously, changing the dense/sparse settings is the main way, but there are some considerations that make this a touchy process. Other ways are to use dynamic calc in the dense dimensions. I say start at the top of your smallest dense dimension and keep the number of DIMENSIONS that you use D-C on limited. Using D-C members in a dense dimension does NOT increase the index file, so it could be considered a "free" reduction in block size -- the penulty is paid on the retrieve side (there is no free ride).

Pls check the calc script requirment

Pls check this calc reqirement and do the needful help
we have got 700000/- INR in your bank You can spend the money but there are rules of spending.
1. we can start withdrawing Rs 1000 only in each month.
2. The Money can be withdrawn only from November 2011
3. This facility is only valid upto next 7 months.
At the end of the seventh month your bank Pass book must show:
Jan Feb Mar Apr May June July Aug Sep Oct Nov Dec Jan Feb Mar Apr May June July
1 1 1 1 1 1 1
(1 = 1000 Rupees as required)
Note : Year changes here after December. Take care of this in logic.
You can think of standard dimensions a planning application has :
1. Accounts
2. Period
3. Scenario
4. Version
5. Entity
6. Year
7. And Many more if you wish

GG what do you think is the cause of the error of this code below which i used for testing.....
declare
v_alltables varchar2(10000);
begin
for rec in (select TABLE_NAME from all_tables where owner = 'APPS' AND ROWNUM =1)
loop
execute immediate 'SELECT DBMS_METADATA.GET_DDL( '|| '''TABLE'',' ||rec.table_name||',''APPS'') FROM DUAL' into v_alltables;
dbms_output.put_line(v_alltables);
end loop;
end;
it gives this error message when run:
Error report:
ORA-00904: "ADX_PRE_AUTOCONFIG": invalid identifier
ORA-06512: at line 7
00904. 00000 - "%s: invalid identifier"But when i change the rec.table_name into '''ADX_PRE_AUTOCONFIG''' the code works properly.
so i decided to have this code and it works.
SET SERVEROUTPUT ON
declare
v_alltables varchar2(10000);
begin
for rec in (select TABLE_NAME from all_tables where owner = 'APPS' AND ROWNUM =1)
loop
execute immediate 'SELECT DBMS_METADATA.GET_DDL( '|| '''TABLE'',' ||''''||rec.table_name||''''||',''APPS'') FROM DUAL' into v_alltables;
dbms_output.put_line(v_alltables);
end loop;
end;for you newbie, this must also work
SET SERVEROUTPUT ON
declare
v_alltables varchar2(10000);
begin
for i in (select table_name from all_tables where rownum<2)
loop
execute immediate 'SELECT DBMS_METADATA.GET_DDL( '|| '''TABLE'',' ||''''||i.table_name||''''||',''TRNG8305_GC'') FROM DUAL' into v_alltables;
dbms_output.put_line(v_alltables);
end loop;
end;hope it helps.....

My Essbase db corrupting when i terminate the calc script why?

Similar Messages

Maybe you are looking for