My /etc/udev/rules.d is empty? [SOLVED]
The other week i installed a virtal inviroment in QEMU, i read a little bit about writing udev-rules, in order to work with USB. but for some reason.. the folder in mentioned in the topic happends to be empty.. and it just strikes me, because when gogling the problem it seems that the people it happend to before, it also ment that the system didnt work, or worked really bad, but my system works fine.. Now, as i allready mentioned, i bumped in to this problem the other week. i have been searching for some obvious noskillmistake, but.. i gave up and just turned to you guys instead.
Last edited by kimbo (2014-11-13 18:02:04)
That folder is empty for me too, because I haven't put anything there. Have you created files there that disappeared? If not, what's the issue? You say everything is working ... so what's the question?
Similar Messages
-
[solved] /etc/udev/rules.d/10-network.rules ignored
Hi.
I have 4 nics (eth0, eth1, eth2, eth3) mapped to MAC addresses in /etc/udev/rules.d/10-network.rules.
Some months ago, I had to symlink /etc/udev/rules.d/80-net-name-slot.rules to /dev/null in order to use these static names.
Now it doesn't work anymore (again and again and again) after a full update (kernel and I assume systemd). The "nic-names" are completely wrong. You call this "predictable". I call this "unpredictable". The only thing which is predictable is that after a kernel update, the network will stop working. It has been that way for months and months ... fortunately I don't update other machines anymore.
Was this non sense really necessary?
Anyway, if you could tell me what to do now to get my network rules applied again, I would really appreciate.
Right now all ethX/MAC are wrong and none of them gets an IP (had to set an IP manually to post here).
* I know what "predictable Network Interface Names" is about. I don't want this bullshit. It's much worse as it used to be. Keep it simple, folks!
Last edited by Agnelo de la Crotche (2013-03-27 07:14:05)tomegun wrote:To narrow down the problem you are experiencing: What do you mean when you say that the names are "wrong"? Are they still eth0, eth1,... just in the wrong order, or are you actually seeing the "weird" new names given by udev?
To answer this question more precisely.
* with /etc/udev/rules.d/80-net-name-slot.rules => /dev/nul and /etc/udev/rules.d/10-network.rules posted earlier (in #4)
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:0a:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:06:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:24:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:1b:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
6: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
link/ether 66:64:b3:6a:26:61 brd ff:ff:ff:ff:ff:ff
The rules are ignored.
* after deleting /etc/udev/rules.d/80-net-name-slot.rules
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp6s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:0a:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
3: enp6s1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:06:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
4: enp2s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:24:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
5: enp4s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:1b:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
6: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
link/ether a2:ee:ec:d1:65:2d brd ff:ff:ff:ff:ff:ff
The rules don't apply.
* with /etc/udev/rules.d/80-net-name-slot.rules => /dev/nul and after replacing eth0, eth1, eth2, eth3 with arbitrary names net0, net1, net2, net3 in /etc/udev/rules.d/10-network.rules
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: net1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:24:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
3: net3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:0a:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
4: net2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:06:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
5: net0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:1b:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff
6: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT
link/ether ea:63:09:b7:1b:1b brd ff:ff:ff:ff:ff:ff
But the rules were applied in this case!
It solved the problem described originally. I think I was hit by the race condition after upgrating to kernel 3.8.4-1. This was actually my first 3.8 kernel.
With kernel 3.7, the rules were working even if the devices were named eth0, eth1, etc.
Those names don't work anymore, at least in my case.
Further I created this file for static ips:
# cat /etc/systemd/system/network.service
[Unit]
Description=Wired Static IP Connectivity
Wants=network.target
Before=network.target
BindsTo=sys-subsystem-net-devices-net0.device
After=sys-subsystem-net-devices-net0.device
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/sbin/ip link set dev net0 up
ExecStart=/sbin/ip addr add 192.168.101.9/24 dev net0
ExecStart=/sbin/ip link set dev net1 up
ExecStart=/sbin/ip addr add 192.168.102.9/24 dev net1
ExecStart=/sbin/ip link set dev net2 up
ExecStart=/sbin/ip addr add 192.168.104.9/24 dev net2
ExecStart=/sbin/ip link set dev net3 up
ExecStart=/sbin/ip addr add 192.168.105.9/24 dev net3
ExecStart=/sbin/ip route add default via 192.168.101.1
ExecStop=/sbin/ip addr flush dev net0
ExecStop=/sbin/ip link set dev net0 down
ExecStop=/sbin/ip addr flush dev net1
ExecStop=/sbin/ip link set dev net1 down
ExecStop=/sbin/ip addr flush dev net2
ExecStop=/sbin/ip link set dev net2 down
ExecStop=/sbin/ip addr flush dev net3
ExecStop=/sbin/ip link set dev net3 down
[Install]
WantedBy=multi-user.target
I disabled netcfg and enabled network.service.
Problem is solved now. -
Are /etc/udev/rules.d/86-hpmud* files obsolete?
For a while now, I keep getting the following errors during boot:
Sat Jan 21 14:25:13 2012: udevd[148]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/86-hpmud-hp_laserjet_professional_p1102w.rules:9
Sat Jan 21 14:25:13 2012: udevd[148]: invalid rule '/etc/udev/rules.d/86-hpmud-hp_laserjet_professional_p1102w.rules:9'
... (repeat for every 86-hpmud-* file in that folder)
I found an (ancient) bug report from 2009 with the subject "hplip: obsolete udev rules files are not removed on upgrades", so I assume they're obsolete, but I've only recently starting seeing this problem, which wouldn't jive with a 3-year old issue.
Can I safely delete these files, assuming that their contents has been replaced with entries in the /lib/udev/rules.d tree? I am not that well-versed in udev, unfortunately....OK - I backed them up and moved them out of /etc/udev/rules.d.
Confirming nothing broke is a bit of a problem right now. Printing is hit & miss from my laptop to my wireless HP P1102w printer at the best of times. I haven't figured out what the real issue is there, but since printing to other HPs works fine, I'll probably have to blame the printer or HPLIP. I wish HP would simplify their software and made simple drivers. I just need to print, I don't need all that hp-toolbox junk. I'll confirm this when I have a chance to print to a different HP printer. -
3 unable to open '/etc/udev/rules.d/':m error during booting
After a recent upgrade to the kernel26-2.6.28.5-1-i686, I got the above error during booting in one of the laptop.
My search did not give any positive solution for this till now. I read that now udev gets its rules from /lib/udev/rules.d.
But still rules files in /etc/udev/rules.d and /lib/udev/rules.d are different. I know that any symllink work around will not work in this case, I tried but as expected the error message appears again.
So, I roll back to kernel26-2.6.28.4-1-i686 and everything back to normal.
Any Idea to resolve this? (package is not broken as I use the same mirror for another PC and in that I am not getting any error)
Last edited by kgas (2009-02-19 16:10:23)This issue got resolved on its own with the latest kernel (kernel26-2.6.28.6-1-i686) update. I will leave this topic for some more time to see others response...
-
Oh god I overwrote /etc/udev/rules.d/90-hal.rules
I accidentally sudo overwrote this file with garbage. I haven't rebooted yet. What was in here? Is it important? How do I get it back?
Thanks!If it was something in that directory, the sizes should be different than mine. This is what I have:
ls -l /etc/udev/rules.d/
total 52
-rw-r--r-- 1 root root 1071 2008-09-24 07:07 60-pcmcia.rules
-rw-r--r-- 1 root root 390 2009-03-07 15:42 75-cd-aliases-generator.rules.optional
-rw-r--r-- 1 root root 2403 2009-03-07 15:42 75-persistent-net-generator.rules.optional
-rw-r--r-- 1 root root 8039 2009-03-07 15:42 81-arch.rules
-rw-r--r-- 1 root root 82 2008-11-30 08:51 90-hal.rules
-rw-r--r-- 1 root root 28 2008-10-19 06:35 99-fuse.rules -
[SOLVED] udev rule no longer working
I have a udev rule set up to automatically mount an ext4 filesystem when I plug a certain thumb drive in. It was working fine until yesterday (probably due to updates). Here is the rule, in file /etc/udev/rules.d/99-gfk.rules:
KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", SYMLINK+="gfshare"
ACTION=="add", KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", RUN+="/bin/mkdir /media/gfshare"
ACTION=="add", KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", RUN+="/bin/mount -t ext4 -o ro,nosuid,nodev,noexec,noatime /dev/gfshare /media/gfshare"
The symlink and the mkdir command are both working fine, but the mount command is not being run for some reason. If I manually run the mount command it works fine. Some possibly helpful output:
# pacman -Qo $(which udevadm)
/usr/bin/udevadm is owned by systemd 212-1
# dmesg |tail -16
[26458.120628] usb 7-1.3: new high-speed USB device number 7 using ehci-pci
[26458.223059] usb-storage 7-1.3:1.0: USB Mass Storage device detected
[26458.223825] scsi10 : usb-storage 7-1.3:1.0
[26459.311607] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[26460.834081] sd 10:0:0:0: [sdd] 15240576 512-byte logical blocks: (7.80 GB/7.26 GiB)
[26460.834931] sd 10:0:0:0: [sdd] Write Protect is off
[26460.834935] sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00
[26460.835617] sd 10:0:0:0: [sdd] No Caching mode page found
[26460.835621] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[26460.839455] sd 10:0:0:0: [sdd] No Caching mode page found
[26460.839460] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[26460.860579] sdd: sdd1 sdd2
[26460.867111] sd 10:0:0:0: [sdd] No Caching mode page found
[26460.867115] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[26460.867118] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[26461.041982] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
# udevadm test /sys/bus/usb/devices/7-1.3
calling: test
version 212
This program is for debugging only, it does not run any program
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.
load module index
timestamp of '/etc/systemd/network' changed
timestamp of '/usr/lib/systemd/network' changed
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context
timestamp of '/etc/udev/rules.d' changed
Skipping overridden file: /usr/lib/udev/rules.d/80-net-setup-link.rules.
read rules file: /usr/lib/udev/rules.d/10-dm.rules
read rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
read rules file: /etc/udev/rules.d/12-android.rules
read rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
read rules file: /usr/lib/udev/rules.d/40-hpet-permissions.rules
read rules file: /usr/lib/udev/rules.d/40-usb-media-players.rules
read rules file: /usr/lib/udev/rules.d/42-usb-hid-pm.rules
read rules file: /usr/lib/udev/rules.d/50-firmware.rules
read rules file: /usr/lib/udev/rules.d/50-udev-default.rules
read rules file: /usr/lib/udev/rules.d/51-android.rules
read rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules
read rules file: /usr/lib/udev/rules.d/60-drm.rules
read rules file: /usr/lib/udev/rules.d/60-keyboard.rules
read rules file: /usr/lib/udev/rules.d/60-pcmcia.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-input.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-serial.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules
read rules file: /usr/lib/udev/rules.d/60-vboxdrv.rules
read rules file: /usr/lib/udev/rules.d/61-accelerometer.rules
read rules file: /usr/lib/udev/rules.d/63-md-raid-arrays.rules
read rules file: /usr/lib/udev/rules.d/64-btrfs.rules
read rules file: /usr/lib/udev/rules.d/64-md-raid-assembly.rules
read rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules
read rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
read rules file: /usr/lib/udev/rules.d/69-libmtp.rules
read rules file: /usr/lib/udev/rules.d/70-infrared.rules
read rules file: /usr/lib/udev/rules.d/70-power-switch.rules
read rules file: /usr/lib/udev/rules.d/70-uaccess.rules
read rules file: /usr/lib/udev/rules.d/71-seat.rules
read rules file: /usr/lib/udev/rules.d/73-seat-late.rules
read rules file: /usr/lib/udev/rules.d/75-net-description.rules
read rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules
read rules file: /usr/lib/udev/rules.d/75-tty-description.rules
read rules file: /usr/lib/udev/rules.d/78-sound-card.rules
read rules file: /usr/lib/udev/rules.d/80-drivers.rules
read rules file: /etc/udev/rules.d/80-net-setup-link.rules
read rules file: /usr/lib/udev/rules.d/80-udisks.rules
read rules file: /usr/lib/udev/rules.d/80-udisks2.rules
read rules file: /usr/lib/udev/rules.d/85-usbmuxd.rules
read rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules
read rules file: /usr/lib/udev/rules.d/95-cd-devices.rules
read rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
read rules file: /usr/lib/udev/rules.d/95-udev-late.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-dell.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-gateway.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-ibm.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules
read rules file: /usr/lib/udev/rules.d/95-upower-csr.rules
read rules file: /usr/lib/udev/rules.d/95-upower-hid.rules
read rules file: /usr/lib/udev/rules.d/95-upower-wup.rules
read rules file: /etc/udev/rules.d/99-gfk.rules
read rules file: /usr/lib/udev/rules.d/99-systemd.rules
read rules file: /usr/lib/udev/rules.d/kino.rules
rules contain 98304 bytes tokens (8192 * 12 bytes), 22360 bytes strings
10092 strings (88570 bytes), 8317 de-duplicated (67986 bytes), 1776 trie nodes used
IMPORT builtin 'usb_id' /usr/lib/udev/rules.d/50-udev-default.rules:9
IMPORT builtin 'hwdb' /usr/lib/udev/rules.d/50-udev-default.rules:9
MODE 0664 /usr/lib/udev/rules.d/50-udev-default.rules:37
GROUP 1002 /usr/lib/udev/rules.d/51-android.rules:387
MODE 0660 /usr/lib/udev/rules.d/51-android.rules:387
RUN '/usr/share/virtualbox/VBoxCreateUSBNode.sh $major $minor $attr{bDeviceClass} vboxusers' /usr/lib/udev/rules.d/60-vboxdrv.rules:6
PROGRAM '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7' /usr/lib/udev/rules.d/69-libmtp.rules:1204
starting '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7'
'/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7'(out) '0'
'/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7' [24644] exit with return code 0
IMPORT builtin 'path_id' /usr/lib/udev/rules.d/71-seat.rules:43
RUN 'uaccess' /usr/lib/udev/rules.d/73-seat-late.rules:15
handling device node '/dev/bus/usb/007/007', devnum=c189:774, mode=0660, uid=0, gid=1002
preserve permissions /dev/bus/usb/007/007, 020660, uid=0, gid=1002
preserve already existing symlink '/dev/char/189:774' to '../bus/usb/007/007'
ACTION=add
BUSNUM=007
DEVNAME=/dev/bus/usb/007/007
DEVNUM=007
DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3
DEVTYPE=usb_device
DRIVER=usb
ID_BUS=usb
ID_DRIVE_THUMB=1
ID_FOR_SEAT=usb-pci-0000_00_1a_7-usb-0_1_3
ID_MODEL=DataTraveler_2.0
ID_MODEL_ENC=DataTraveler\x202.0
ID_MODEL_FROM_DATABASE=Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
ID_MODEL_ID=6545
ID_PATH=pci-0000:00:1a.7-usb-0:1.3
ID_PATH_TAG=pci-0000_00_1a_7-usb-0_1_3
ID_REVISION=0100
ID_SERIAL=Kingston_DataTraveler_2.0_1C6F654E4041ED601910053F
ID_SERIAL_SHORT=1C6F654E4041ED601910053F
ID_USB_INTERFACES=:080650:
ID_VENDOR=Kingston
ID_VENDOR_ENC=Kingston
ID_VENDOR_FROM_DATABASE=Toshiba Corp.
ID_VENDOR_ID=0930
MAJOR=189
MINOR=774
PRODUCT=930/6545/100
SUBSYSTEM=usb
TAGS=:seat:uaccess:
TYPE=0/0/0
USEC_INITIALIZED=26452326568
adb_user=yes
run: '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 774 00 vboxusers'
run: 'uaccess'
unload module index
Unloaded link configuration context
# udevadm test /sys/bus/usb/devices/7-1.3:1.0
calling: test
version 212
This program is for debugging only, it does not run any program
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.
load module index
timestamp of '/etc/systemd/network' changed
timestamp of '/usr/lib/systemd/network' changed
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context
timestamp of '/etc/udev/rules.d' changed
Skipping overridden file: /usr/lib/udev/rules.d/80-net-setup-link.rules.
read rules file: /usr/lib/udev/rules.d/10-dm.rules
read rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
read rules file: /etc/udev/rules.d/12-android.rules
read rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
read rules file: /usr/lib/udev/rules.d/40-hpet-permissions.rules
read rules file: /usr/lib/udev/rules.d/40-usb-media-players.rules
read rules file: /usr/lib/udev/rules.d/42-usb-hid-pm.rules
read rules file: /usr/lib/udev/rules.d/50-firmware.rules
read rules file: /usr/lib/udev/rules.d/50-udev-default.rules
read rules file: /usr/lib/udev/rules.d/51-android.rules
read rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules
read rules file: /usr/lib/udev/rules.d/60-drm.rules
read rules file: /usr/lib/udev/rules.d/60-keyboard.rules
read rules file: /usr/lib/udev/rules.d/60-pcmcia.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-input.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-serial.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
read rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules
read rules file: /usr/lib/udev/rules.d/60-vboxdrv.rules
read rules file: /usr/lib/udev/rules.d/61-accelerometer.rules
read rules file: /usr/lib/udev/rules.d/63-md-raid-arrays.rules
read rules file: /usr/lib/udev/rules.d/64-btrfs.rules
read rules file: /usr/lib/udev/rules.d/64-md-raid-assembly.rules
read rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules
read rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
read rules file: /usr/lib/udev/rules.d/69-libmtp.rules
read rules file: /usr/lib/udev/rules.d/70-infrared.rules
read rules file: /usr/lib/udev/rules.d/70-power-switch.rules
read rules file: /usr/lib/udev/rules.d/70-uaccess.rules
read rules file: /usr/lib/udev/rules.d/71-seat.rules
read rules file: /usr/lib/udev/rules.d/73-seat-late.rules
read rules file: /usr/lib/udev/rules.d/75-net-description.rules
read rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules
read rules file: /usr/lib/udev/rules.d/75-tty-description.rules
read rules file: /usr/lib/udev/rules.d/78-sound-card.rules
read rules file: /usr/lib/udev/rules.d/80-drivers.rules
read rules file: /etc/udev/rules.d/80-net-setup-link.rules
read rules file: /usr/lib/udev/rules.d/80-udisks.rules
read rules file: /usr/lib/udev/rules.d/80-udisks2.rules
read rules file: /usr/lib/udev/rules.d/85-usbmuxd.rules
read rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules
read rules file: /usr/lib/udev/rules.d/95-cd-devices.rules
read rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
read rules file: /usr/lib/udev/rules.d/95-udev-late.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-dell.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-gateway.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-ibm.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules
read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules
read rules file: /usr/lib/udev/rules.d/95-upower-csr.rules
read rules file: /usr/lib/udev/rules.d/95-upower-hid.rules
read rules file: /usr/lib/udev/rules.d/95-upower-wup.rules
read rules file: /etc/udev/rules.d/99-gfk.rules
read rules file: /usr/lib/udev/rules.d/99-systemd.rules
read rules file: /usr/lib/udev/rules.d/kino.rules
rules contain 98304 bytes tokens (8192 * 12 bytes), 22360 bytes strings
10092 strings (88570 bytes), 8317 de-duplicated (67986 bytes), 1776 trie nodes used
IMPORT builtin 'hwdb' /usr/lib/udev/rules.d/50-udev-default.rules:11
RUN 'kmod load $env{MODALIAS}' /usr/lib/udev/rules.d/80-drivers.rules:5
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3/7-1.3:1.0
DEVTYPE=usb_interface
DRIVER=usb-storage
ID_MODEL_FROM_DATABASE=Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
ID_VENDOR_FROM_DATABASE=Toshiba Corp.
INTERFACE=8/6/80
MODALIAS=usb:v0930p6545d0100dc00dsc00dp00ic08isc06ip50in00
PRODUCT=930/6545/100
SUBSYSTEM=usb
TYPE=0/0/0
USEC_INITIALIZED=452326811
run: 'kmod load usb:v0930p6545d0100dc00dsc00dp00ic08isc06ip50in00'
unload module index
Unloaded link configuration context
Last edited by bentglasstube (2014-04-03 20:51:36)I see. That is somewhat aggravating but I will find another way to achieve what I wanted I suppose.
Thank you. Should I mark this is solved or unsolvable or something? Sorry, I'm new to posting on these forums.
Edit: I was able to achieve what I wanted with udevil as recommended by the wiki.
Last edited by bentglasstube (2014-04-03 20:55:45) -
[SOLVED] udev rule launch graphical app
How can I make a udev rule launch a graphical application, like, for instance, feh?
I've tried creating a rule detects when a specific mass storage device is connected and executes a script (/root/.scripts/feh-camera.sh). The script exports DISPLAY and XAUTHORITY and everything seems to work.
However when I restarted a black screen appeared right after Loading Modules (that appears after Starting udev events). Removing the udev rule solved the problem, so I must be doing something wrong.
What's the right way of doing this?
Thanks in advance.
Last edited by Vieira (2010-05-06 22:38:49)Device was not connected at boot but I'll try what you suggested anyway. Thanks for your help.
EDIT:
It's solved. It turns out the underlying problem was that exporting DISPLAY breaks the udev environment. For future reference solved it with:
45-foobar.rules
ATTRS{product}=="DSLR-A330", ATTR{removable}=="1", ENV{REMOVE_CMD}="/bin/umount /media/camera", RUN+="/bin/mount <bla bla>", RUN+="/bin/su vieira -c '/etc/udev/rules.d/45-foobar.sh'"
and the script, where the problem was, must not export anything, just set inline, i.e.
#!/bin/sh
HOME=/home/vieira DISPLAY=:0 /usr/bin/feh -r /mnt/camera
Last edited by Vieira (2010-05-06 22:35:39) -
[SOLVED]Udevd fails to recognize rules in /lib/udev/rules.d
I've been having a few crashes since the update of udev earlier this week (so far only on my laptop where the Xserver hangs and requires a hard reboot to get anything working again). While investigating the logs, I ran across the following errors:
Oct 26 04:39:54 lswest-CULV [ 0.836513] udevd[74]: starting version 173
Oct 26 04:39:54 lswest-CULV [ 17.450369] udevd[260]: starting version 174
Oct 26 04:46:04 lswest-CULV [ 0.839752] udevd[74]: starting version 173
Oct 26 04:46:04 lswest-CULV [ 8.778232] udevd[259]: starting version 174
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/42-qemu-usb.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/50-firmware.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/50-udev-default.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-cdrom_id.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-alsa.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-input.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-serial.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-storage-tape.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-storage.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-v4l.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/61-accelerometer.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/70-udev-acl.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-net-description.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-probe_mtd.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-tty-description.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/78-sound-card.rules': No such file or directory
Oct 26 11:00:48 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/80-drivers.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/42-qemu-usb.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/50-firmware.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/50-udev-default.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-cdrom_id.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-alsa.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-input.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-serial.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-storage-tape.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-storage.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/60-persistent-v4l.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/61-accelerometer.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/70-udev-acl.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-net-description.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-probe_mtd.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/75-tty-description.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/78-sound-card.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/80-drivers.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/81-arch.rules': No such file or directory
Oct 26 11:01:16 lswest-CULV udevd[259]: can not find '/lib/udev/rules.d/95-keyboard-force-release.rules': No such file or directory
These errors have appeared since the 24th of October (the last marked update day for the udev package). I'm also slightly concerned about the first 4 lines, where udevd "starts" version 173 and then version 174. According to pacman -Q udev, only version 174 is installed.
Upon investigating the folder, I find that all the "missing" files are present:
[lswest@lswest-CULV: rules.d]% ls
total 652K
drwxr-xr-x 2 root root 4.0K Oct 26 11:01 ./
drwxr-xr-x 5 root root 4.0K Oct 26 11:01 ../
-r--r--r-- 1 root root 6.4K Aug 20 02:32 10-dm.rules
-rw-r--r-- 1 root root 505 Aug 16 19:06 10-vboxdrv.rules
-r--r--r-- 1 root root 1.3K Jul 7 2010 11-dm-lvm.rules
-r--r--r-- 1 root root 1011 Nov 13 2009 13-dm-disk.rules
-rw-r--r-- 1 root root 159K Nov 28 2010 40-gphoto.rules
-rw-r--r-- 1 root root 26K Oct 4 11:56 40-usb-media-players.rules
-rw-r--r-- 1 root root 764 Oct 19 23:43 42-qemu-usb.rules
-rw-r--r-- 1 root root 1.8K Jul 30 18:31 45-libnjb.rules
-rw-r--r-- 1 root root 219 Oct 19 23:43 50-firmware.rules
-rw-r--r-- 1 root root 3.5K Oct 19 23:43 50-udev-default.rules
-rw-r--r-- 1 root root 52K Jun 13 13:04 52-libmtp.rules
-rw-r--r-- 1 root root 104K Oct 5 23:42 53-sane.rules
-rw-r--r-- 1 root root 584 Oct 19 23:43 60-cdrom_id.rules
-rw-r--r-- 1 root root 1.1K Aug 3 18:54 60-pcmcia.rules
-rw-r--r-- 1 root root 616 Oct 19 23:43 60-persistent-alsa.rules
-rw-r--r-- 1 root root 2.4K Oct 19 23:43 60-persistent-input.rules
-rw-r--r-- 1 root root 947 Oct 19 23:43 60-persistent-serial.rules
-rw-r--r-- 1 root root 6.0K Oct 19 23:43 60-persistent-storage.rules
-rw-r--r-- 1 root root 1.4K Oct 19 23:43 60-persistent-storage-tape.rules
-rw-r--r-- 1 root root 770 Oct 19 23:43 60-persistent-v4l.rules
-rw-r--r-- 1 root root 46 Feb 9 2011 60-rfkill.rules
-rw-r--r-- 1 root root 166 Oct 19 23:43 61-accelerometer.rules
-rw-r--r-- 1 root root 369 Oct 17 15:34 61-gnome-bluetooth-rfkill.rules
-rw-r--r-- 1 root root 2.2K Sep 14 09:07 64-md-raid.rules
-rw-r--r-- 1 root root 40 Aug 12 18:32 65-kvm.rules
-rw-r--r-- 1 root root 4.0K Oct 4 09:34 69-cd-sensors.rules
-rw-r--r-- 1 root root 233 Jul 17 18:06 70-infrared.rules
-rw-r--r-- 1 root root 2.6K Oct 19 23:43 70-udev-acl.rules
-rw-r--r-- 1 root root 642 Oct 19 23:43 75-net-description.rules
-rw-r--r-- 1 root root 254 Oct 19 23:43 75-probe_mtd.rules
-rw-r--r-- 1 root root 642 Oct 19 23:43 75-tty-description.rules
-rw-r--r-- 1 root root 3.3K Aug 3 10:00 77-mm-ericsson-mbm.rules
-rw-r--r-- 1 root root 11K Aug 3 10:00 77-mm-longcheer-port-types.rules
-rw-r--r-- 1 root root 379 Aug 3 10:00 77-mm-pcmcia-device-blacklist.rules
-rw-r--r-- 1 root root 510 Aug 3 10:00 77-mm-platform-serial-whitelist.rules
-rw-r--r-- 1 root root 1.6K Aug 3 10:00 77-mm-simtech-port-types.rules
-rw-r--r-- 1 root root 3.0K Aug 3 10:00 77-mm-usb-device-blacklist.rules
-rw-r--r-- 1 root root 1.6K Aug 3 10:00 77-mm-x22x-port-types.rules
-rw-r--r-- 1 root root 9.3K Aug 3 10:00 77-mm-zte-port-types.rules
-rw-r--r-- 1 root root 284 Sep 20 09:26 77-nm-olpc-mesh.rules
-rw-r--r-- 1 root root 4.2K Oct 19 23:43 78-sound-card.rules
-rw-r--r-- 1 root root 559 Oct 19 23:43 80-drivers.rules
-rw-r--r-- 1 root root 667 Aug 3 10:00 80-mm-candidate.rules
-rw-r--r-- 1 root root 9.3K Aug 26 18:47 80-udisks.rules
-rw-r--r-- 1 root root 372 Oct 19 23:43 81-arch.rules
-rw-r--r-- 1 root root 335 Apr 4 2011 85-regulatory.rules
-rw-r--r-- 1 root root 602 Aug 4 17:39 85-usbmuxd.rules
-rw-r--r-- 1 root root 131 Aug 17 09:43 90-alsa-restore.rules
-rw-r--r-- 1 root root 83 Jan 10 2011 90-hal.rules
-rw-r--r-- 1 root root 1.9K Aug 9 15:18 90-libgpod.rules
-rw-r--r-- 1 root root 2.0K Oct 20 17:26 90-pulseaudio.rules
-rw-r--r-- 1 root root 847 Oct 4 09:34 95-cd-devices.rules
-r--r--r-- 1 root root 492 Nov 1 2009 95-dm-notify.rules
-rw-r--r-- 1 root root 3.0K Oct 19 23:43 95-keyboard-force-release.rules
-rw-r--r-- 1 root root 11K Oct 19 23:43 95-keymap.rules
-rw-r--r-- 1 root root 155 Oct 19 23:43 95-udev-late.rules
-rw-r--r-- 1 root root 2.8K Oct 3 13:17 95-upower-battery-recall-dell.rules
-rw-r--r-- 1 root root 1.2K Oct 3 13:17 95-upower-battery-recall-fujitsu.rules
-rw-r--r-- 1 root root 1020 Oct 3 13:17 95-upower-battery-recall-gateway.rules
-rw-r--r-- 1 root root 1.6K Oct 3 13:17 95-upower-battery-recall-ibm.rules
-rw-r--r-- 1 root root 774 Oct 3 13:17 95-upower-battery-recall-lenovo.rules
-rw-r--r-- 1 root root 1.1K Oct 3 13:17 95-upower-battery-recall-toshiba.rules
-rw-r--r-- 1 root root 1.6K Oct 3 13:17 95-upower-csr.rules
-rw-r--r-- 1 root root 6.0K Oct 3 13:17 95-upower-hid.rules
-rw-r--r-- 1 root root 354 Oct 3 13:17 95-upower-wup.rules
-rw-r--r-- 1 root root 1.4K Aug 1 12:20 97-bluetooth-hid2hci.rules
-rw-r--r-- 1 root root 28 Oct 7 2010 99-fuse.rules
Can anyone confirm this? If I get confirmation that this is indeed present for other users (and a bug, not a "feature"), I'll open a bug report for the udev package.
Also, semi-related, in the post-install message from the udev package they refer you to the folder /etc/udev.d/rules, however, that directory structure doesn't exist on my system, and the old /etc/udev/rules.d is still present.
I'd appreciate any information or input. If any further information is required, I'll gladly supply it.
Last edited by lswest (2011-10-26 09:54:58)Since the upgrade to 174, thunar doesn't mount anymore external hdd or usb. I removed my user from storage group.
Searching for solutions I find out that I have the same errors in the logs that lswest has.
/var/log/messages.log:
Oct 29 10:29:46 localhost udevd[75]: starting version 174
while /var/log/errors.log:
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/42-qemu-usb.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/50-firmware.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/50-udev-default.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-cdrom_id.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-alsa.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-input.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-serial.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-storage-tape.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-storage.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/60-persistent-v4l.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/61-accelerometer.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/70-udev-acl.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/75-net-description.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/75-probe_mtd.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/75-tty-description.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/78-sound-card.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/80-drivers.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/81-arch.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/95-keyboard-force-release.rules': No such file or directory
Oct 29 11:42:14 localhost udevd[75]: can not find '/lib/udev/rules.d/95-keymap.rules': No such file or directory
Edit: a fresh installation of udev seems stopping error message flooding in errors.log, but I still can't automount drives and reboot/shutdown with dbus-send method.
Last edited by oceans11 (2011-10-29 10:29:48) -
[Solved] Auto-open a file manager after mounting with udev rules
Hellooooo,
I followed the udev Wiki for auto mounting USBs and it now works great.
The only problem is: how can I automatically open a file manager of the mounted directory? I tried putting this at the end of the "ACTION=="add"," section in "/etc/udev/rules.d/11-media-by-label-auto-mount.rules" but for some reason nothing happens:
, RUN+="/usr/bin/dolphin /media/%E{dir_name}"
Even if I just try to open dolphin with the "ACTION=="add"," section nothing happens either way.
So what am I doing wrong?
Last edited by algorythm (2011-05-05 12:35:56)In that case, the best choice in my opinion is to use Automounting UDisks Wrappers :
devmon is a script developed by IgnorantGuru. He left Arch Linux, but the package in AUR is still there and is the last version. For a future new release, it should be available at his blog site. The script is distro independent.
My udisksvm script, in its default state, doesn't launch a file manager after automounting, but it is not a big thing to let the automounting be done and then manually open a file manager (a new entry in the traydevice right-click menu can also be added for that).
If you can do without automounting, there is also the bashmount script from jnguyen.
All these scripts don't require writing any udev rules, they use udisks instead.
I hope you could find something you like and which will suit your wishes. -
Hi guys.
I'm on a mission to run win7 on QEMU, and I also want to be able to use my USB-ports. Now, archwiki tells me to do this:
$ qemu-system-i386 -usbdevice host:vendor_id:product_id disk_image
You can find vendor_id and product_id of your device with lsusb command.
Note: If you encounter permission errors when running QEMU, see Udev#Writing udev rules for information on how to set permissions of the device.
I then made a file called 10-adm.rules both in, /etc/udev/rules.d and /usr/lib/udev/rules.d
In it I wrote:
KERNEL=="sdc[0-9]*", GROUP="storage"
My user with wich i lauch QEMU is in the group storage, and my usb always turns out as sdc*.
But it still gives me the permission erros.
Last edited by kimbo (2014-11-28 14:06:24)now I renamed the files to 99 instead of 10, and I even overkilled it with the GROUP:= instead of GROUP=
tried:
udevadm control --reload-rules
udevadm trigger
But it still doesnt work
lsusb gives me:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 18a5:0302 Verbatim, Ltd Flash Drive
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b23b Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 04ca:3002 Lite-On Technology Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
And my qemu-launch-commad it:
qemu-system-x86_64 -m 1G -enable-kvm -cpu host -usbdevice host:18a5:0302 win7
oh, I dont really undestand what you by ' the group that /dev/sdc* ends up having'
Last edited by kimbo (2014-11-13 23:04:47) -
[SOLVED] udev rules: cannot run command
I want to run a scipt everytime I plug in my external harddrive. I read the documentation and create a file called /etc/udev/rules.d/extern_hd.rules:
SUBSYSTEMS=="usb", SYSFS{serial}=="33504D315647585A", SYMLINK+="ExternHD", RUN+="/root/scripts/test.sh"
The symlink "ExternHD" gets created. The permissions of test.sh are rwxr-xr-x root root, but it never gets executed. What am I doing wrong?
Last edited by Kei (2007-09-18 11:30:35)Solution was easy... Udev doesn't want to start anything from within /root, so I put a hardlink to /usr/local/bin/ and now everything works fine.
-
[SOLVED] automatic usb-backup with udev-rules + script
I would like to have my usb-harddrive automatically start a backup as soon as it is plugged in. And finally a bell is supposed to ring.
I've created an udev-rule and a backup-script as shown below.
However, instead of creating /dev/backup-drive first something strange is happening:
The bell rings 3 times, followed by the backup, followed by a 4th ring.
What's going on?
Here's may udev-rule:
## /etc/udev/rules.d/95-backup.rules
SUBSYSTEMS=="usb", ATTRS {serial}=="100", SYMLINK=="backup-drive", RUN+="/usr/local/bin/backup-thumb.sh"
fstab:
/dev/backup-drive /media/backup ext3 rw,user 0 0
and my script:
#!/bin/bash
sleep 10
rsync -vrtolgh --exclude '/.VirtualBox/' --delete /home/myhome /media/backup-drive
aplay /usr/share/sounds/phone.wav
Last edited by mehldutt (2007-07-03 20:28:27)The syntax of your udev rule is all wrong - for example after SYMLINK you should use "+=" or ":=". "==" is for comparing to some value.
I think in rsync command line you want -H not -h (help) option. Also -v (verbose) is useless since you'll never see the output.
Another thing which will prevent running rsync properly is /media/backup-drive while you use /media/backup in fstab.
I suggest that you first try running rsync command from the command line "manually" and try if it works at all. After you'll make it work try the below suggestions.
Another problem: what makes the backup drive mounted under /media/backup directory when you plug it into usb slot ? Are you doing it somehow "manually" in the 10 second period after plugging ? Do you use automounter of some kind ?
If you intend to use ext3 as the backup drive filesystem you should also add sync command after rsync to make sure no data stays in RAM cache.
I think you need to read udev manpage first.
I can also advice you to read my udev rules for automounting usb devices (it's for any type of filesystem and any number of partitions):
KERNEL=="sd[b-z]", NAME:="%k", SYMLINK+="usbhd-%k", GROUP:="users", OPTIONS="last_rule"
ACTION=="add", KERNEL=="sd[b-z][0-9]", SYMLINK+="usbhd-%k", GROUP:="users", NAME:="%k"
ACTION=="add", KERNEL=="sd[b-z][0-9]", RUN+="/bin/mkdir -p /media/usbhd-%k"
ACTION=="add", KERNEL=="sd[b-z][0-9]", RUN+="/bin/ln -s /media/usbhd-%k /mnt/usbhd-%k"
ACTION=="add", KERNEL=="sd[b-z][0-9]", PROGRAM=="/lib/udev/vol_id -t %N", RESULT=="vfat", RUN+="/bin/mount -t vfat -o rw,noauto,flush,dirsync,noexec,nodev,noatime,dmask=000,fmask=111 /dev/%k /media/
usbhd-%k", OPTIONS="last_rule"
ACTION=="add", KERNEL=="sd[b-z][0-9]", RUN+="/bin/mount -t auto -o rw,noauto,async,dirsync,noexec,nodev,noatime /dev/%k /media/usbhd-%k", OPTIONS="last_rule"
ACTION=="remove", KERNEL=="sd[b-z][0-9]", RUN+="/bin/rm -f /mnt/usbhd-%k"
ACTION=="remove", KERNEL=="sd[b-z][0-9]", RUN+="/bin/umount -l /media/usbhd-%k"
ACTION=="remove", KERNEL=="sd[b-z][0-9]", RUN+="/bin/rmdir /media/usbhd-%k", OPTIONS="last_rule"
I think it could be simplified and modified for your backup device like this:
SUBSYSTEMS=="usb", ATTRS(idVendor)=="XXXX", ATTRS(idProduct)=="YYYY", KERNEL=="sd[a-z]", NAME:="%k", SYMLINK:="backupdevice", OPTIONS="last_rule"
SUBSYSTEMS=="usb", ATTRS(idVendor)=="XXXX", ATTRS(idProduct)=="YYYY", ACTION=="add", KERNEL=="sd[a-z]1", SYMLINK:="backuppartition", GROUP:="users", NAME:="%k"
SUBSYSTEMS=="usb", ATTRS(idVendor)=="XXXX", ATTRS(idProduct)=="YYYY", ACTION=="add", KERNEL=="sd[a-z]1", RUN+="/bin/mount -t auto -o rw,noauto,async,dirsync,noexec,nodev,noatime /dev/%k /media/backup-drive"
SUBSYSTEMS=="usb", ATTRS(idVendor)=="XXXX", ATTRS(idProduct)=="YYYY", ACTION=="add", KERNEL=="sd[a-z]1", RUN+="/usr/local/bin/backup-thumb.sh", OPTIONS="last_rule"
SUBSYSTEMS=="usb", ATTRS(idVendor)=="XXXX", ATTRS(idProduct)=="YYYY", ACTION=="remove", KERNEL=="sd[a-z]1", RUN+="/bin/umount -l /media/backup-drive", OPTIONS="last_rule"
assuming that you have a single partition backup drive formatted as ext3 (or at least it's the first partition).
Also another assumption is that idVendor and idProduct are unique to your backup drive. If not you should add some extra ATTRS parameters that will ensure this combination is unique.
The directory /media/backup-drive must already exist (remove your fstab line - it's not needed in this case because mount command is run directly from the udev rule).
Replace all XXXX and YYYY with the values from lsusb for your backup device - plug it in, run lsusb and copy values which look like XXXX:YYYY near to the name of your backup device.
Anyway, you can play with different options and try to modify it yourself. The automounting rules work for me very well for some time (including flush option). The backup rules you need to test yourself :-)
Last edited by lanrat (2007-05-05 17:20:51) -
[Solved] udev rules: serial for persistent device naming disappeared
Hello,
since the latest upgrade of udev and kmod I cant't mount my external e-SATA hard disk with my working udev rules.
This is my udev rule:
$ cat /etc/udev/rules.d/66-persistent_esata.rules
KERNEL=="sd?1", SUBSYSTEMS=="block", ENV{ID_SERIAL_SHORT}=="S1VSJ1LS301247", NAME="aluguard"
When plugged in, I could decrypt and mount it with "sudo cryptsetup luksOpen /dev/aluguard aluguard && mount /mnt/aluguard".
Since the update above I get "Device /dev/aluguard doesn't exist or access denied."
While I re-checked https://wiki.archlinux.org/index.php/Ma … _with_udev, I discovered, that the serial entry in the output of udevadm has vanished:
$ udevadm info -a -p $(udevadm info -q path -n /dev/sdg)
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:09.0/host3/target3:0:0/3:0:0:0/block/sdg':
KERNEL=="sdg"
SUBSYSTEM=="block"
DRIVER==""
ATTR{range}=="16"
ATTR{ext_range}=="256"
ATTR{removable}=="0"
ATTR{ro}=="0"
ATTR{size}=="1953525168"
ATTR{alignment_offset}=="0"
ATTR{discard_alignment}=="0"
ATTR{capability}=="50"
ATTR{stat}==" 96 24 762 780 0 0 0 0 0 780 780"
ATTR{inflight}==" 0 0"
ATTR{events}==""
ATTR{events_async}==""
ATTR{events_poll_msecs}=="-1"
looking at parent device '/devices/pci0000:00/0000:00:09.0/host3/target3:0:0/3:0:0:0':
KERNELS=="3:0:0:0"
SUBSYSTEMS=="scsi"
DRIVERS=="sd"
ATTRS{device_blocked}=="0"
ATTRS{type}=="0"
ATTRS{scsi_level}=="6"
ATTRS{vendor}=="ATA "
ATTRS{model}=="SAMSUNG HD103SI "
ATTRS{rev}=="1AG0"
ATTRS{state}=="running"
ATTRS{timeout}=="30"
ATTRS{iocounterbits}=="32"
ATTRS{iorequest_cnt}=="0xa2"
ATTRS{iodone_cnt}=="0x98"
ATTRS{ioerr_cnt}=="0xc"
ATTRS{evt_media_change}=="0"
ATTRS{queue_depth}=="31"
ATTRS{queue_ramp_up_period}=="120000"
ATTRS{queue_type}=="simple"
looking at parent device '/devices/pci0000:00/0000:00:09.0/host3/target3:0:0':
KERNELS=="target3:0:0"
SUBSYSTEMS=="scsi"
DRIVERS==""
looking at parent device '/devices/pci0000:00/0000:00:09.0/host3':
KERNELS=="host3"
SUBSYSTEMS=="scsi"
DRIVERS==""
looking at parent device '/devices/pci0000:00/0000:00:09.0':
KERNELS=="0000:00:09.0"
SUBSYSTEMS=="pci"
DRIVERS=="ahci"
ATTRS{vendor}=="0x10de"
ATTRS{device}=="0x0554"
ATTRS{subsystem_vendor}=="0x1849"
ATTRS{subsystem_device}=="0x0554"
ATTRS{class}=="0x010601"
ATTRS{irq}=="23"
ATTRS{local_cpus}=="00000000,00000003"
ATTRS{local_cpulist}=="0-1"
ATTRS{numa_node}=="0"
ATTRS{dma_mask_bits}=="64"
ATTRS{consistent_dma_mask_bits}=="64"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
What is the reason for this strange behaviour, and how can I get back the serial entry?
Thank in advance!
Last edited by indianahorst (2012-01-31 13:03:20)$ udevadm info -q all -n /dev/sdg1
P: /devices/pci0000:00/0000:00:09.0/host3/target3:0:0/3:0:0:0/block/sdg/sdg1
N: sdg1
S: disk/by-id/ata-SAMSUNG_HD103SI_S1VSJ1LS301247-part1
S: disk/by-id/scsi-SATA_SAMSUNG_HD103SIS1VSJ1LS301247-part1
S: disk/by-id/wwn-0x50024e900136a03e-part1
S: disk/by-path/pci-0000:00:09.0-scsi-3:0:0:0-part1
S: disk/by-uuid/bb024e1b-78a5-4ed0-9e80-aaa7633aa493
E: DEVLINKS=/dev/disk/by-id/ata-SAMSUNG_HD103SI_S1VSJ1LS301247-part1 /dev/disk/by-id/scsi-SATA_SAMSUNG_HD103SIS1VSJ1LS301247-part1 /dev/disk/by-id/wwn-0x50024e900136a03e-part1 /dev/disk/by-path/pci-0000:00:09.0-scsi-3:0:0:0-part1 /dev/disk/by-uuid/bb024e1b-78a5-4ed0-9e80-aaa7633aa493
E: DEVNAME=/dev/sdg1
E: DEVPATH=/devices/pci0000:00/0000:00:09.0/host3/target3:0:0/3:0:0:0/block/sdg/sdg1
E: DEVTYPE=partition
E: ID_ATA=1
E: ID_ATA_DOWNLOAD_MICROCODE=1
E: ID_ATA_FEATURE_SET_AAM=1
E: ID_ATA_FEATURE_SET_AAM_CURRENT_VALUE=254
E: ID_ATA_FEATURE_SET_AAM_ENABLED=1
E: ID_ATA_FEATURE_SET_AAM_VENDOR_RECOMMENDED_VALUE=254
E: ID_ATA_FEATURE_SET_APM=1
E: ID_ATA_FEATURE_SET_APM_ENABLED=0
E: ID_ATA_FEATURE_SET_HPA=1
E: ID_ATA_FEATURE_SET_HPA_ENABLED=1
E: ID_ATA_FEATURE_SET_PM=1
E: ID_ATA_FEATURE_SET_PM_ENABLED=1
E: ID_ATA_FEATURE_SET_PUIS=1
E: ID_ATA_FEATURE_SET_PUIS_ENABLED=0
E: ID_ATA_FEATURE_SET_SECURITY=1
E: ID_ATA_FEATURE_SET_SECURITY_ENABLED=0
E: ID_ATA_FEATURE_SET_SECURITY_ENHANCED_ERASE_UNIT_MIN=194
E: ID_ATA_FEATURE_SET_SECURITY_ERASE_UNIT_MIN=194
E: ID_ATA_FEATURE_SET_SMART=1
E: ID_ATA_FEATURE_SET_SMART_ENABLED=1
E: ID_ATA_SATA=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN1=1
E: ID_ATA_SATA_SIGNAL_RATE_GEN2=1
E: ID_ATA_WRITE_CACHE=1
E: ID_ATA_WRITE_CACHE_ENABLED=1
E: ID_BUS=ata
E: ID_FS_TYPE=crypto_LUKS
E: ID_FS_USAGE=crypto
E: ID_FS_UUID=bb024e1b-78a5-4ed0-9e80-aaa7633aa493
E: ID_FS_UUID_ENC=bb024e1b-78a5-4ed0-9e80-aaa7633aa493
E: ID_FS_VERSION=1
E: ID_MODEL=SAMSUNG_HD103SI
E: ID_MODEL_ENC=SAMSUNG\x20HD103SI\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
E: ID_PART_ENTRY_TYPE=0x83
E: ID_PART_TABLE_TYPE=dos
E: ID_PATH=pci-0000:00:09.0-scsi-3:0:0:0
E: ID_PATH_TAG=pci-0000_00_09_0-scsi-3_0_0_0
E: ID_REVISION=1AG01131
E: ID_SCSI_COMPAT=SATA_SAMSUNG_HD103SIS1VSJ1LS301247
E: ID_SERIAL=SAMSUNG_HD103SI_S1VSJ1LS301247
E: ID_SERIAL_SHORT=S1VSJ1LS301247
E: ID_TYPE=disk
E: ID_WWN=0x50024e900136a03e
E: ID_WWN_WITH_EXTENSION=0x50024e900136a03e
E: MAJOR=8
E: MINOR=97
E: PART_ENTRY_DISK=8:96
E: PART_ENTRY_NUMBER=1
E: PART_ENTRY_OFFSET=63
E: PART_ENTRY_SCHEME=dos
E: PART_ENTRY_SIZE=1953520002
E: SUBSYSTEM=block
E: UDEV_LOG=3
E: UDISKS_PARTITION=1
E: UDISKS_PARTITION_ALIGNMENT_OFFSET=0
E: UDISKS_PARTITION_NUMBER=1
E: UDISKS_PARTITION_OFFSET=32256
E: UDISKS_PARTITION_SCHEME=mbr
E: UDISKS_PARTITION_SIZE=1000202241024
E: UDISKS_PARTITION_SLAVE=/sys/devices/pci0000:00/0000:00:09.0/host3/target3:0:0/3:0:0:0/block/sdg
E: UDISKS_PARTITION_TYPE=0x83
E: UDISKS_PRESENTATION_NOPOLICY=0
E: USEC_INITIALIZED=6897248001
OK, there is the serial.... but the problem persists - udev doesn't execute the rule and doesn't create /dev/aluguard. -
[solved] My udev rule for my Android phone doesn't work, not sure why
I have the HTC G1 Android phone and I'm trying to get a udev rule working for it. This is my rule ...
/etc/udev/rules.d/50-android.rules
SUBSYSTEM=="usb_device", SYSFS{idVendor}=="0bb4", MODE="0666", NAME=="android"
... but when I connect my phone, /dev/android doesn't appear. 0bb4 is correct ...
/sys/class/usb_device/usbdev5.2/device/idVendor
0bb4
... so what's going on?
Last edited by synthead (2008-11-28 15:19:09)There is, but I can already use it that way. I'm learning how to code in java so I can develop applications for it. There's a feature in the SDK where you can install and run your code on your Android device fairly seamlessly. You literally hit "Run" and a few moments later, your phone's going to town. But for this to work, permissions need to be set (0666). But my udev rule does nothing and I dont understand why.
This is where I got this information: http://code.google.com/android/intro/de … cehardware -
[solved] udev-rules for bluetooth PCMCIA
My plan:
get my bluetooth-PCMCIA card to work:
CONCEPTONIC CBT100C
Problem:
I have to issue the following command for it to work:
#hciattach ttyS0 bcsp
Therefor I wrote following udev-rule that doesn't work:
##/etc/udev/rules.d/05-bluez-pcmcia-support.rules
SUBSYSTEMS=="pcmcia", ATTRS{prod_id2}=="Bluetooth Card", RUN+="/usr/sbin/hciattach ttyS0 bcsp"
My Question:
Could someone explain to me why this rule does not work?
Info:
#pccardctl info
PRODID_1="PCMCIA"
PRODID_2="Bluetooth Card"
PRODID_3=""
PRODID_4=""
MANFID=0279,950b
FUNCID=2
after #hciattach ttyS0 bcsp
#udevinfo -a -p /sys/devices/pci0000\:00/0000\:00\:1e.0/0000\:06\:09.0/0.0/tty/ttyS0/
KERNEL=="ttyS0"
SUBSYSTEM=="tty"
DRIVER==""
ATTR{dev}=="4:64"
looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:06:09.0/0.0/tty':
KERNELS=="tty"
SUBSYSTEMS==""
DRIVERS==""
looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:06:09.0/0.0':
KERNELS=="0.0"
SUBSYSTEMS=="pcmcia"
DRIVERS=="serial_cs"
ATTRS{modalias}=="pcmcia:m0279c950Bf02fn00pfn00pa281F1C5Dpb7664FB1Dpc00000000pd00000000"
ATTRS{prod_id2}=="Bluetooth Card"
ATTRS{prod_id1}=="PCMCIA"
ATTRS{card_id}=="0x950b"
ATTRS{manf_id}=="0x0279"
ATTRS{func_id}=="0x02"
ATTRS{pm_state}=="on"
ATTRS{function}=="0x00"
looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:06:09.0':
KERNELS=="0000:06:09.0"
SUBSYSTEMS=="pci"
DRIVERS=="yenta_cardbus"
ATTRS{msi_bus}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{enable}=="2"
ATTRS{modalias}=="pci:v00001180d00000476sv0000144Dsd0000C01Ebc06sc07i00"
ATTRS{local_cpus}=="f"
ATTRS{irq}=="16"
ATTRS{class}=="0x060700"
ATTRS{subsystem_device}=="0xc01e"
ATTRS{subsystem_vendor}=="0x144d"
ATTRS{device}=="0x0476"
ATTRS{vendor}=="0x1180"
looking at parent device '/devices/pci0000:00/0000:00:1e.0':
KERNELS=="0000:00:1e.0"
SUBSYSTEMS=="pci"
DRIVERS==""
ATTRS{msi_bus}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{enable}=="1"
ATTRS{modalias}=="pci:v00008086d00002448sv00000000sd00000000bc06sc04i01"
ATTRS{local_cpus}=="f"
ATTRS{irq}=="0"
ATTRS{class}=="0x060401"
ATTRS{subsystem_device}=="0x0000"
ATTRS{subsystem_vendor}=="0x0000"
ATTRS{device}=="0x2448"
ATTRS{vendor}=="0x8086"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
ATTRS{uevent}==""
#dmesg
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xb4000000-0xb40fffff: excluding 0xb4000000-0xb400ffff
pcmcia: registering new device pcmcia0.0
ttyS0: detected caps 00000700 should be 00000100
0.0: ttyS0 at I/O 0x400 (irq = 3) is a 16C950/954
Last edited by mehldutt (2007-08-07 18:04:37)I called it
05-bluez-pcmcia-support.rules
I rebooted but still no success.
I also tried this:
ACTION=="add", SUBSYSTEMS=="pcmcia", ATTRS{prod_id2}=="Bluetooth Card", RUN+="aplay /usr/share/sounds/phone.wav"
But still no success
Maybe you are looking for
-
Please help!!!
-
Material Cost estimate realted issue and question
Hello, we have a multi level BOM, I have makre and released for one sub level material in the BOM, there are few other sub- materils which need to be costed, can i do the cost estimate for the highest level of BOM or do i need to do first for eac
-
hi, We need a report for the Stock Transfer Advice Value Particulars based on the Packing Code from MARC table, Plant, Material, Distribution Channel, Sales Org almost from 5 tables like MARC, LIKP, LIPS, A820, KONP basing on the delivery date betwee
-
Is there any report that tells that what is the excise amt with reference to GRN.\ Plz guide
-
How to change report layout to "Landscape"?
Hi, I am using oracle 6i in window 98. I want to change my report layout to "Landscape"? How do I do it? Thanks. Jun