My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

Similar Messages

Why will some CDs not work properly with my Macbook Pro with Retina display?

I have the external CD drive for the Macbook Pro with Retina display, but I'm finding that some CDs will not run their applications properly. However, on the older editions of the Macbook Pro (for example, on the 13"), the programs run fine. Is there something I can download to fix this problem?

When the MBP-R does not run CD applications "properly", what does it do?
Is it possible that the applications that do not run properly are incompatible with Mountain Lion? For example, might they be old PowerPC applications that relied on Rosetta to run on Intel CPUs?

I updated my phone with the update for applewatch and now my phone is not working properly with hondalink. Can anyone help?

I just updated my phone this morning. It's the new update for the apple watch. I have a 2015 honda fit with honda link. I usually play my spotify through the ''ipod'' source because it shows all of the song information. Since the update it will not play through the i pod source even if it is plugged into the car. Can anyone tell me how to either make the song information show up when I play it through bluetooth or how to make it play through the i pod source again?

Hi mrsmaybe,
I'm sorry to hear you are having issues with your iPhone after a recent update. If you continue to have issues connecting your iPhone to your car's stereo system, either hard wired or via Bluetooth, you may find the troubleshooting steps outlined in the following article helpful:
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
Regards,
- Brenden

I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

I just tried this, no luck...
I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

My garage band will not work properly with new lion upgrade..HELP

My garage band will not work properly with new lion upgrade..HELP
I have tried to open old session i have done in garage band and many of the effects and instruments I have used will not show up. The system seems to have a bug.

If the graphical user interface looks broken, that is quite often a problem of corrupted user preferences - have you tried to remove the preferences file, as described in the FAQ
http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
Here is again the short version:
Quit GarageBand, if it is running.
Open your User Library in the Finder. It is hidden in MacOS X Lion, so use the Finder's "Go" menu:
Finder > GO hold down the "Options" key, until the library appears in the menu, select it.
In the window that opens, open the folder "Preferences" and remove the file:com.apple.garageband.plist and com.apple.garageband.plist.lockfile
Then try again to run GarageBand and download the loops.
The preferences file stores all you user settings that you set using the "Preferences" panel in GarageBand, also the layout of the GarageBand window and the location of your recent projects. You will have to enter these settings again after removing the file.
Regards
Léonie

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

Go to Finder > Preferences then select the General tab
Make sure External disks is selected.

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Facebook(wall post) location button not working in mountain lion macbook pro 13inch in upper right button

facebook(wall post) location button not working in mountain lion macbook pro 13inch in upper right button

No third party applications installed; no gestures changed. It just starts acting up like I described a few times a day. I'll be browsing the internet and go to switch desktops and it suddenly doesn't work.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

Check for updates by running MS Office Update directly from:
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
(Open Finder, ⇧⌘G, paste in the above and click)

USB Hard Drives Not Working Properly?

I have an MSI K9N Neo V2/V3? (msi-7369) motherboard with 2GB Ram and an Athlon 64 x2 4200+ processor.
I have a strange USB Port problem! I have a 5 year old home built machine running Windows 7 32bit. Lately the USB ports on the front and back of the machine are not working properly with external hard drives? USB powered or mains powered. They are recognised and show all the folders but If I try to view or transfer anything it freezes the drive?
The ports are working fine for USB sticks though?
I have removed the USB controllers and let the system reinstall them again, but its no better?
I would format the drive and reinstall windows but I have not backed-up all my videos I want and my system restore has been disabled?
I have tried a new USB PCI card but the same happens?
I have updated the bios and all updates with the MSI Live update program.
Can anyone recommend anything to try before I start removing stuff?
Someone told me to update my USB drivers but I can't find any?
Any help appreciated

I have formatted and installed Windows 7 64bit and USB's were working!!
Updated and now they don't again?
Its going out the window soon!!
Could the firmware update play a part? Am I able to go back to the older firmware?

Airdrop - not working from iMac to MacBook Pro

Airdrop won't work from iMac to MacBook Pro, but will work from MacBook Pro to iMac. Is there something I need to set on either computer?
Thanks.

http://support.apple.com/kb/ht4783

The button on my iPod touch is hard and not working properly

I have bought an iPod touch 4G est year (2012) and the start button is hard and sometimes when I give once calcase responds as if twice. I have an iPad and the button is softer and I have friends who have an iPhone and is also soft.
Regards.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

External widescreen monitor not working properly

Hi! i have an LG Flatron 2243S monitor and i just hooked it up to my late 2011 macbook pro 15" through the mini display port and vga cable since the monitor does not have DVI input, Im having issues with the resolution it shows. if i put it in 1920x1080 60hz it leaves a black space on the left side of the screen. I have it set to 1400x1050 60hz so it fils the screen but it looks streched since i believe that is more of a 4:3 resolution... Can you guys help me?

Well, I think I have solved the problem. One of the external cases apparently was screwing up the works as far as the USB bus was concerned. After removing that unit from the setup, it seems as if everything is back to normal. I now have to test the HDD's to see if either of the two from that particular enclosure have a problem.

External audio cards not working properly

First off, i have an HP Dv7-1134us laptop. AMD 2.0 GHZ dual core processor, 4 gigs of ram, etc etc. I have 2 external audio cards:
1.Presonus Firestudio Mobile(firewire)
2.Line 6 UX1(usb)
I had an HP desktop before that I used for recording, but that recently broke down so I have been trying to use my laptop. I bought a Firewire express card for the presonus, and installed everything along with it. However, while my computer recognizes the device, it will consistently turn off and on...but no audio comes out.
The Line 6 ux1 works, but it crackles and pops at a ridiculous rate. When recording more than 1 track, it clutters up my speakers with nothing but crackling and distortion.
I have tried an Express Booster for the first issue, have tried disabling my LAN card, have tried disabling IRQ's in the control panel and nothing has changed. Can ANYONE help me or am I going to have to really jump ship and just get a mac?

Sorry about the delay in replying....
The updated ATI drivers that should apply to my machine are at
http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx
or the file I was originally pointed to
http://sites.amd.com/us/game/downloads/Pages/integrated_win7-32.aspx#3
but these won't install here, neither will any other updates from ATI, even older ones.
I'm waiting for a family member to bring round his Win 7 64-bit machine as I want to compare the Microsoft files referred to in the failure messages on his machine with mine. I'm trying not to have to re-install Windows.....
I think the recording tab effect is just a Microsoft programming problem that happens to show up the fault in the ATI usb part of the motherboard chipset drivers, and I think it may appear because the little recording meters that appear are driven by some recording code of Microsoft's. Here using a powered or unpowered usb2 hub cures the problem as it moves the translation between usb 1 and usb 2 away from the faulty code in the machine.
It's interesting that I've been posting all over the place for many, many months about this and had no response anywhere until about 10 days ago and now there have been 2 responses. It will be really good if you can confirm that a usb 2 hub and/or the ATI update cures the problem.
I think you may find there are some remaining crackles which can be got rid of by disabling any wifi networking on the machine.

External VGA monitors are not working only with my Macbook Pro 2012mid version

Hi all,
I have a macbook pro 13' 2012mid version, running the latest version of Mavericks, 10.9.2. If I connect my macbook to any extrernal VGA monitor (I have tried 4 different monitors), then the external display is detected in system preferences, but the monitor is showing only black screen (no signal). I am 100% sure, that my minidisplay port, the cable and the monitors are working properly, cause if I boot the same macbook from bootcamp win7 partition, then external monitors are working well.
I have also tried the same miniDP VGA with an older macbook pro (I think it is a model from year 2011, but also running Mavericks 10.9.2) on the same displays and the monitors are working fine. So the problem must be with in my OS X.
A have also tried some things, that I found on the net, like booting with the plugged in monitors in safe mode, reseting pram, I tried different settings for the external monitor in the system preferences (resolution, refresh rate...) but nothing helped. External monitor stayed recognized in system preferences, but with black screen and no signal.

Your post is incredibly hard to read, font is way to small.
If you used Boot Camp Assistant to create a partition to install Windows to you need a REAL Windows 7 or 8 install media and license key and you have to actually install Windows on your Mac. Boot camp is only for creating a partition to install Windows and starting the Windows install from REAL Windows install media.
That Windows install media has to be a DVD disc, if your Mac has a built in DVD drive (Apple does not allow Windows to be install any other way on Mac computers that originally come with a built in DVD drive), or from a USB stick with the actual Windows install files on it (Not an ISO of the Windows install files).
So the question is did you install Windows on your Mac? It doesn't look like it from the Option key boot and the list of available Boot Devices you posted.

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

Similar Messages

Maybe you are looking for