My external hard drive won't eject so I can unplug it... and other problems

I bought an external hard drive to use with TM. It is 160 GB Western Digital Travel one. When I initially plugged it in, before I even messed with TM, I partitioned it into 2 drives about 70 GB each, one for TM and one to take stuff off my laptop to create space and store it else where. All was fine and dandy until I turned off my computer and unplugged my external hard drive because I had to take my lap top and didn't want to lug the drive with me. When I plugged it back in and just clicked on TM to see what was available, nothing was there. With it being 2am and me being frustrated I turned it off and am trying to fix it now, except this morning when I plugged in my external hard drive, it can only find my "Extra Stuff" partitioned drive and not my designated "Time Machine Drive" (it doesn't show up on the desktop). I have gone into the disk utility to see if I could repair it, or just erase the TM partition and start over. It currently is trying to "repair" the volume and it says that it is ok, but I didn't know if there were any other suggestions to fix this. It still is not showing up in my desktop.
So far I'm not too impressed with TM. I'm unsure of the best way to disconnect my external hard drive and prevent this from happening again. When I try to simply drag the drive to "eject" to essentially unmount it and then safely unplug it from my USB it asks if I want to "eject all" (meaning the 2 partitioned drives) I click yes and it comes up saying one is still in use. Instead I turn off my computer and unplug it after the computer is off. This is probably a bad idea, but I don't know what else to do. Any suggestions? Do I have to go into the disk utility each time I want to take off my external hard drive and click "unmount"?
Sorry for such a lengthy explanation. Usually programs like this on macs are so simple. TM seems to be less user friendly than their other programs and it has thrown me for a loop.
Message was edited by: larrygal316

I'm having the same issue. Time machine isn't actively running, though just to be sure I turned the service off through the TM utility: no go. Still can't eject. Getting 'resource busy' from umount (sudo umount /dev/disk1s1, that's my external drive name). Umount on the volume says not mounted. Checked activity monitor and couldn't see any time machine processes running, only fsevents, which has to stay running.
I threw the following:
sudo umount -vf /dev/disk1s1
and the drive umounted. -v is verbose, just in case there were any errors thrown I wanted to know, and -f is force umount, which forces the drive to unmount. Check 'man umount' from terminal to see more info on these.
After doing this a couple times (I was doing some testing with some other things to find a faster solution than having to open terminal and umount) it just started umounting correctly. I have no idea why, but it did. So just keep that command in mind, just in case.
Gryyphyn, out.

Similar Messages

External Hard drive won't eject.

hi, im new to the boards. just having an issue with my new external hard drive. everytime i use it or i use my cf card reader which is firewire it won't eject either. i've read there are special commands to go in and see what applications are running and i've tried using disk utility to eject the harddrive. nothing seems to work. ive got all my photos from jobs on this harddrive and im worried that by pulling the cord or switching off the device is eventually going to render all my data corrupt or potentially erase it all. if you know step by step instructions to putting commands in to eject these things it would be of great help. im on 10.3.9 ibook g4.
the error is basically telling me the drive is still in use and can nnot eject. not sure why because there are no other apps running?

Well i think i figured out what was causing the issue. i had a jpeg in the trash. i tried to delete it but it states an error message that the jpeg is being used in another application. so i pulled it out of the trash then plugged my external harddrive back in and the tested it to see if it would eject properly and it did! so now i just need to figure out how to delete that jpeg? so the fact that this jpeg is somehow tied up in an application was causing my card reader and external harddrive to not eject properly? strange. thanks for the tip though. appreciate your input.

External Hard Drive won't eject, finder freezes up.

Macbook will not allow my to eject my external hard drive. When I try, the finder bar at the bottom of the screen freezes up and I have to shut down the computer manually.
It's a Seagate FreeAgent Go 500 GB USB drive that has been journaled to operate on Macs and I haven't had any problems with it until just yesterday.
Not sure what to do here.

Run disk utiltiy on your hard drive to repair it, also repair your permissions.

My external hard drive won't show up on my macbook air, and my iPhone when connected won't show up as connected in iTunes, help

When I connect my external hard drive to my MB Air it is to recognizing it. It did 2 days ago and it is compatible I have been using it for a month now. Also when I connect my iPhone 6 to it, it won't show up in iTunes anymore......please help

Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Boot into Recovery and launch Disk Utility. Is the drive recognized?
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

External Hard Drive won't erase. What can i do?

Hey everyone,
The external hard drive i used as a Time Machine for my macbook stopped being recognised but it shows up on Disk Utility. I've already tried to erase it to reformat it but I keep getting an error saying that the disk couldn't be unmounted.
Does anyone know what i can do to make it work again?
Thanks!
Extra:
I've already tried repairing it but Disk Utility simply said it can't repair the disk.

Is Time Machine still trying to use it? Try turning off Time Machine and then try to format it.
Another option might be to try to format it while booting into the Recovery partition. That should sever any ties the OS has with the drive.
If those option fail, I would assume the disk is bad.

I have a external hard drive connected to my wifi modem can I view and manage it on my iPad. Is there a app. If so what is it

Can I open file on my external hard drive with it connected to my wifi modem .
Is there a app
If so what is it
Please help

What kind of WiFi system are you using? If it is an AirPort base station, you can download the free AirPort Utility app to control the station.

External Hard Drive Won't Mount- Need to recover files

Hello Everyone,
I am hoping that one of you fine mac experts may be able to assist ~
Problem: External Seagate FreeAgent Desktop USB external hard drive
won't mount on desktop=ie: no access to my important files.. Please Help!
Details:
External seagate freeagent 500 GB Desktop USB HD ( only 2 months old)
(using for document / file backup-not as a startup disc)
on my Mac G3 350 MZ Blue & White Tower /768 ram/ running OSX 10.1.5 & OS9.2~
~
Problem: Started using the external 500 GB HD 2 months ago -with no problems-until this morning. Tried to double click to open it to access files
and got the "beach ball of death" and needed to restart.
My trusty G3 started up fine, however, the external HD was now
not showing up on the desktop as normal. I troubleshooted -by restarting,
trying different a/c plugs/ different USB ports , ran disk utility..called
seagate -not much help . Seagate said to try the HD on another mac-which I did-
a G5 tower- same problem.
~
The External hard drive will show up in disk utility, but is grayed out.
and when click "mount" same two messages keep showing:
message 1: "a disk attempting to mount as unknown has failed verification or has failed to
mount.please use disk utility to check the disk"
~
message 2- when unplugging and repluggin the usb in-and upon
restart:" you have inserted a disk containg no volumes that mac osx
can read to use unreadable volumes,click initialize to continue with the disk inserted ,click continue"
~
( I really need access to these files- and do not want to re-initialize the HD!!)
I ran Disk Utility /first aid "verify & repair , the following info came up:
Repairing disk "main backup 2007 ".
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid key length ( <<<IN RED )
Repair completed. "
~~
Though it said the repair was completed, the "invalid key length" issue
still comes up when re-running disk utility...Hard drive would still not
mount on desktop-even after restarting .
~~~~~
If there is a mac genius out there that can help?- it would be greatly
appreciated. I have tried to call seagate several times in the last several hours-
1st time-they disconnected me after being on hold 10 minutes-2nd call
I was put on hold for 40 minutes ..Finally spoke to someone ( they are not mac users or mac experts!)and he said I would need to send it to Seagate's Data Recovery-... for a fee of course!
~~~
At this point, I am hoping to just get the files and photos off
the hard drive- I heard about Disk Warrior-should I use that and if so
what version?
Thank you very much!
L

Will zapping the PRAM be of any use in getting the external to mount on the desktop?
Your external Hard drive is already recognized. But it cannot be mounted on the desktop due to its directory damage. You can certainly Zap the PRAM, and it will not hurt anything, but I am skeptical that it will change the situation.
Do you think the Disk Warrior 4.0 cd will even work on my G3 350MHZ running Mac OS 10.1.5?
If you boot from the CD and run it from the CD, absolutely yes. If you attempt to INSTALL it from a download or a CD, probably not.
Have you ever used Disc Warrior and is using it complicated?
I own and use Disk Warrior. You select the drive to be rebuilt, it builds a proposed new directory from the information and file fragments available.
When complete, it will provide a list of problems encountered, tell you what files have been placed in the "Rescued Items" folder, and allow you too look at your drive using the proposed new directory. Your only decision is whether the new directory seems to be an improvement over the old \[in your case, hopelessly corrupted] directory. You then tell it whether to replace the old directory with the proposed new directory, or to abandon its work and leave your Hard Drive unchanged.
Is there a good chance that the ext HD will still have my files on it- or do you think from what I've described that they are gone ?
From what you have described, your files are very likely to still be there. Sometimes in a situation like this, a handful of files cannot be recovered.
My other thought was to take the external HD there and have them try to recover the files.
Make sure you completely understand the costs involved. File recovery using a service like DriveSavers can run into many hundreds of dollars. They are prepared to disassemble your drive in a clean room and replace controller boards and read/write heads to achieve success. Your drive has serious, but not fatal, Directory damage. The Hardware, and most of your files, are likely just fine.

External Hard Drive won't mount on desktop!

Hey, guys.
I ran into a problem this morning that I've never ran into before and I wasn't sure where to write it but I thought this is best.
Here it goes...
Last night I had a power surge and when I restarted my computer, my external hard drive did not mount on my desktop. I than proceeded with restarting my computer, I relinked all my connections and I cant seem to get it fixed. I have a lot of material on my external drive that I dont have backed up (I know, a stupid move) anyways, I dont want to lose that information. Also, when I open up disk utility, the icon for my external drive is there and the partition I made for my external drive shows up also but the title of my partition for my external hard drive is not in bolded font. I tried to click the button to mount my external drive cause the specs tell me that it is not mounted but when I press the mount button, it does nothing. I than tried clicking the unmount button and than restart my computer and still nothing.
What problem am I facing and how can it be fixed?
Thanks.

Dear Jason,
Gary's advised is, IMHO, a very sound one.
The only thing I can think of about your problem, given the information you have provided us, is to run Disk Warrior on your external HD.
In fact, DW is particularly indicated in events, like:
"...you should run DiskWarrior when you suspect that there is directory damage on one of your disks. Directory damage can result in the disk not mounting (not appearing on the desktop when the computer is started), missing files or folders, an inability to move or copy files, or crashes when files are used...".
You could actually buy your copy of DW Licence on-line and download it directly onto your internal HD, starting from this "Information you must read before you make your purchase" page. A hardware copy of the software you have so purchased, will follow by postal service (or currier, if so you choose), shortly.
Follow all the instructions you will find in the download to install the DW software onto your main internal HD and then run it on your external hard drive.
DW has saved my data several times and in similar situations as you are experiencing. IMHO, you should seriously give it a try and, even in the unfortunate event it does not manage to solve your problem, it is one of those Mac OSX utilities which ANY Mac power user MUST have handy at all times.
So, no matter what, my opinion is that it is always well-spent-money those used to purchase your copy of DW: in the long run, you won't regret it.
In the event that even DW is unable to retrive your precious data, my suggestion is to contact Micro Com data recovery. It's going to cost you some money, but if you make a leaving out of the data you've lost on your external hard drive, it's going to be worth it.
All the best.
Costa

External hard drive won't mount, even after disk repair.

My Toshiba external hard drive won't mount on my MacBook Pro 10.8.5. I can see it in my disk repair, and when I repair, "the partition map appears to be ok." But I can't access the icon to be able to open the hard drive contents on my desktop. Help!

Hello maccynicwhoalwayshasmacs,
Thanks for the question. After reviewing your post, it sounds like trouble with an external HD mounting. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
USB and FireWire Quick Assist
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Copying large files to external hard drive won't work

I tried looking for this all over google and here, and i could only find old threads that didn't end up with a clear answer, so i decided to post one of my own for the first time.
Basically, I have folders of music and movies that i'm trying to move over to the external hard drive (2tb WD my book studio using firewire 800) and at one point during the copy, the finder copy window will get stuck and won't move any further. So the copy doesn't go on, and even if i try to cancel it only the beachball starts rolling and finder won't respond until i restart or unplug my external.
The weird thing is that even when I was copying a few folders that weren't too big, around 2gb or so, it did the same thing. BUT when i took 3 individual avi files that were around 3gb it copied fine.
I really don't understand what's going on, and I want to just take the entire folder, let it copy, and go do something else rather than sit here moving file after file.
Does anyone have any idea as to what's happening? I'm not sure whether to blame my imac or my external. external does time machine back ups fine tho.. I have it split into 2 partitions, one for tm and one as a FAT drive. Any help would be great! Thanks!

All right. So let's say your hard drive is named 'WD MyBook' or something like that.
Let's also say the folder you're trying to copy is your Documents folder.
In Terminal, you'd type:
sudo ditto pathToDocuments pathToWDMyBook
Now obviously, those are fake paths and don't actually represent where those things are, but that's to illustrate the syntax you need to use.
Your external drive path will be something like this:
/Volumes/WD\ MyBook
The trick here is that if there's a space in the name of the drive, you need to substitute a "\ " for the space. You can also put single quotes around the whole thing like this: '/Volumes/WD MyBook'
Everything here is case sensitive. You can also drag the icon for the external drive into the Terminal window, and it will paste the path into Terminal for you.
So the full example would turn out to be:
sudo ditto /Users/yourusername/Documents /Volumes/WD\ MyBook
If you wanted to make sure everything went into a specific folder on your external, you'd need to add that to the path you specify. For instance, if you want everything to go into a folder named Backup on your external, the command would then be:
sudo ditto /Users/yourusername/Documents /Volumes/WD\ MyBook/Backup
Either way,
sudo ditto source destination
That's it, just spaces between everything. Like I said before, you don't need the sudo necessarily, depends what you're copying.
I don't know if that makes any sense, I'm a little out of it today. Let me know if you need further clarification on any of that, or let me know what you're copying/where it's going and I can probably help you with the syntax. Or just drag and drop! It's easy.

After installing snow leopard my external hard drive won't show up on screen or backup

Afer installing leopard my external hard drive won't show up on my desk top. It also won't backup my hard drive with time machine. I need help.

Try going to finder preferences, general, make sure show these items on desktop external disks is clicked. You can also go to sidebar (same pane) and click it there so it will show when you open your HD. Time Machine>system preferences>time machine>turn it off click select disk, make sure the correct disk is selected, the turn TM back on. Hope this helps.

External hard drive won't leave

So here's the deal, my external hard drive refuses to eject. I keep getting this message that says the hard drive is being used by a program but that is impossible because I restarted the computer and have no program running except finder and dashboard.
any suggestions?
Thanks
Netta

Just because you don't intentionally run any applications or open any files from your external drive does not mean this is actually the case. It's quite possible that you have a startup item that references an item on your external drive. To check this go to System Preferences > Accounts > Login Items.
Is this a recent phenomena? If it is then you might want to think back to when this started and see if you can match it to a software installation. Otherwise, it is simple enough to shut down your computer and disconnect your drive when it is off. Not a great solution I know but it's a start.

External hard drive won't shut down after switch from OS10.5 to OS10.4.11

i recently chanded my OS from 10.5 to 10.4.11 (as a programme i want to use is not compatible with leopard), but since i have done this my external hard-drive won't shut down automatically when i shut down my mac. i have to switch it off at the plug instead.
can anyone suggest how i can get it to do this again?
i'm a little concerned that i'm damaging the external drive by turning it off manually all the time..
thanks

Some hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
-mj
[email protected]

External hard drive won't unmount for disk utility.

Im not sure if this is the right topic area but I have a white macbook and my external hard drive won't unmount. I want to erase it via disk utility but it keeps telling me other programs are using it.

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

My external hard drive won't eject so I can unplug it... and other problems

Similar Messages

Maybe you are looking for