My external hard drive wont show up in the "Save to:" menu when I try to import videos

My old external broke so I found my old one and plugged it in and went to import some videos on imove from an sd card but my external hard drive wont show up on the "save to:" drop down menu. I've been on utility disk to try and repair disk permission but I can't because the button isn't lit up. I can only click on verify disk or repair disk. I tried both of these but it still wont come on the drop down menu. It is showing up on the left in the event library but it has a little yellow triangle with a black exclamation mark in it.
Hope that all makes sense!
Any help would be very much appreciated!

Ok in disk utility it says Format : MS-DOS (FAT32)
Sorry Im not sure what you mean by can it connect via firewire? Sorry I'm a bit useless with technology haha

Similar Messages

  • External Hard drive wont show up in Finder

    Hi,
    After Mountain Update, the external hard drive icon wont show up in Finder sidebar, Desktop and in Disk Utility.
    Is there anything which needs to be set in System Preference ??
    I have the External Hard Disk checkbox checked in Finder Preference, inspite of this I cannot see the Hard drive icon
    Please help.

    You can try looking in Finder Prefereneces. 
      Go to the Finder Menu > Prefeences
      Look at the sidebar pane.  Make sure the Devices box is checked.
    Go back to your finder window and make sure that Devices are not hidden.  To the right of the Devices work there is a dimly visible show/hide command that is visible only when you have your cursor next to the Devices word.  
    You can also try unpluggin the drive and unplugging its USB cord then plugging it all back in to try again.
    Jay

  • How do I get the pictures from my iPhoto on my external Hard Drive to show up in the already existing iPhoto on my MacBook?

    I have an early 2008 MacBook. I had been using iPhoto on this MacBook until I purchased an iMac in 2011, at which time I copied my iPhoto Library from my MacBook to my iMac. Then I realized that my pictures and music were consuming the memory on my iMac, so I moved iPhoto and my iTunes LIbrary to an external Hard Drive. Now I am in a situation where I do not have access to my iMac, but will need to use my MacBook as my main computer for the next year. So, I have my iPhoto on an external hard drive and I plug it into my MacBook and see the iPhoto Library folder, but when I click on it, it opens up the old iPhoto that is still existing on my MacBook and will not show any of the new pictures?! At first I thought it wasn't able to show up anything because my MacBook was running two operating systems behind what my iMac was when I was running my iPhoto Library from that computer. So, I upgraded to OS X 10.7.5 and upgraded the existing iPhoto on my MacBook to iPhoto '11 version 9.4.3. However whenever I plug in the external hard drive and click on the iPhoto Library folder to open it up, it is still just opening up the already existing iPhoto on the MacBook (with my older pictures) rather than the iPhoto on the hard drive (with my newer pictures). How can I access my pictures that are on my external hard drive?

    Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

  • External hard drive not showing up on the desktop

    I have a external hard drive and
    when i turn it on the icon for the drive does not show up.
    I used disk warrior and it found sever damaged sections of the drive.
    i fixed that and it is still not mounting. Should it get a new hard drive?

    Hi Josh,
    I used disk warrior and it found sever damaged sections of the drive.
    Did it repair them? If you run DW again does it report it as OK?
    Open Disk Utility & see if it shows up there, if so highlight it & see if the Mount button/icon mounts it.

  • My External Hard drive wont show up when plugged in

    I have an external 500GB LaCie hard drive connected to my 13inch mac book 09. It is used to house all of my itunes library (11,000 songs+), a bunch of pictures and a few movies and random other things. It was working fine until I came home from work one day and an error message was on my computer saying that I had ejected a disk without properly disconnecting it (meaning my hard drive). My HD was still plugged into my computer and I never touched it. I tried everything from unplugging, rebooting, etc, and it still wont show up when I connect it to my computer. A day earlier I had my itunes playing for 8 hours while I was at work and I had been noticing over the past few days that my power supply was unusually loud but didn't think anything of it until this all happened! I would appreciate any advice as I would like to keep listening to all my music. Please help!

    Ok in disk utility it says Format : MS-DOS (FAT32)
    Sorry Im not sure what you mean by can it connect via firewire? Sorry I'm a bit useless with technology haha

  • I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

    I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
    I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
    Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
    Connection Bus : USB                                                               Write Status : Read/Write
    Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
    USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
    As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

    Hello,
    I have just experienced the same thing!
    Although my external drive shows in Disk Utility, it does not show in Finder.
    And the Verify/Repair buttons are also greyed out.
    Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
    I was wondering if you solved your problem, & if so, would you share your solution.
    I´m afraid to Erase in case I lose all my Data on the drive.
    Thanks in advance for your reply!

  • All my external Hard Drives stopped showing up in both Finder and Disk Utility

    Hello there.
    i have this strange issue that occured just out of nowhere without me (knowingly) having contributed anything to it.
    yesterday i launched my iMac and my external firewire drive wasn't showing up in neither the finder nor on the desktop. i instantly thought about a hard drive crash, but soon tried other things to evaluate (or not) my guess.
    for instance, i unplugged the drive waited a few minutes before i plugged it in again. since this iomega drive is also equipped with a regular usb port i also switched cables and tried connecting it via the iMac usb sockets as well as via an usb hub without any luck. the drive still won't show up. so i launched the Disk Utility, to see if the drive needs some checking/repairing, but to my surprise it wasn't showing in Disk Utility either.
    thus far i only considered this to be an issue with only this particular external drive, but when i eventually switched on a 2nd external drive (this time an usb drive i use for Time Machine) that drive also refused to show up in either the Finder or the Disk Utility app.
    curious as i was, i then fired up a 3rd and 4th external drive and now had all 4 drives running at the same time. none of which were showing up, just as if they weren't even connected with the iMac.
    this strikes me as more than odd. i've heard about hard drive failures and crashes. they just occur over time. maybe and under some very strange coincidences it is possible that two external hard drives quit their jobs at the very same time, but seriously .... 4 of them?? i hardly think so.
    well, maybe it's the iMac's usb/firewire controller that's causing the trouble, i thought. but then again, my other connected devices (iPhone, iPad, Printer, Scanner, eyeTV) are functioning and get detected just fine as far as i can tell.
    i have no idea what's going on. i dismiss the idea of 4 external drives having crashed all at the same time just as much as i don't think that the iMac's usb/firewire controller has got any issues. re-formatting any of the 4 drives is out of the question and even if i'd consider such desperate measures, the Disk Utility wouldn't let me re-format anything anyhow, because the drives aren't listed there. i wish i could just use my Time Machine to resolve the issue but, as i mentioned earlier, i can't access the Time Machine because it also won't show up.
    please, i need an expert's help here. please, somebody bring back my 4 external drives so i can access them in finder again.
    any help will be much appreciated.
    thank you in advance..
    ..Otis

    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    diskutil list
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.
    If any personal information appears in the output, edit before posting, but don’t remove the context.

  • External Hard Drive/Not Showing Up on Desktop

    I have a G4, running OS X 10.2.8 and recently my kids deleted some important data. So--we bought an external hard drive (WD MyBook 160 GB Essential Edition, which says on the box that it runs 10.2.8 and higher).
    We took the external hard drive and the computer to a reputable repair place, the guy there took the hard drive out and using a G6 system, restored what he could to the external hard drive.
    We bring it home, plug it in, and the computer is not reading the new external hard drive. I did check in disk utility, and it shows up as a greyed out item on the disk utility.
    The external hard drive does show up when hooked up to my husband's office PC.
    Any ideas as to why this is happening and how to correct it?
    Thanks, Ruth

    OK, I figured it out (in case anyone else needs to know) with this information from the Western Digital site:
    Macintosh Operating System 10.3.x or earlier will only recognize FAT32 partitions that are smaller than 128-gigabytes. Multiple FAT32 partitions smaller than 128-gigabytes will need to be created in order for Macintosh Operating System 10.3.x or earlier to recognize the partitions. You will need to use a Windows based computer to create FAT32 partitions, as Macintosh does not have the ability to create them.
    Macintosh Operating System 10.4.x or later can recognize FAT32 partitions over 128-gigabytes.

  • External Hard Drives not showing

    I have 2 external hard drives connected using FW 800, a Western Digital 500TB & a Seagate 500TB. The Western Digital has a habit of freezing and the last time this happened I powered down the iMac. When I re started the iMac neither external hard drive is showing on the desk top what's happening and how do I cure this?

    HI MIke,
    To start with if your forum profile is correct you need to update your system softare to 10.5.8. Go here and install the v10.5.8 Combo Update
    Also, in the Finder from the Menu Bar click Finder/Preferences and select the General tab.
    Select the 2nd button and relaunch the Finder.
    Carolyn

  • I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

    I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

    Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

  • After iTunes Transfer To External Hard Drive It Shows Less In External Hard Drive

    Hello,
    I transffered my iTunes library to a new My Passport Portable 2 TB external hard drive. My iTunes Library is 349.94 GB and on External Hard Drive it shows 204.81 GB after transfer.
    Why does it not match up, does it automatically delete duplicates. I want to make sure I have my complete library before deleting it from my computer, thanks .
    Couldn't find another category for some reason, hope this will be ok.
    Best regards

    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

  • Music from external hard drive not showing up

    I am new to using a mac. I have had an iphone for almost a year so I am catching on quickly to my macbook but this problem has stumped me and all my mac using friends.
    I have a 500gb seagate external hard drive aswell as a new 500gb seagate internal.
    I transferred all my music from an old ipod onto the external hard drive. There is about 50gb of music.
    When I plug my external into my pc desktop I can see the music folder organized into subfolders with files inside that are encoded unless they are opened in itunes. My pc doesn't have enough internal memory to open and store my music library so I have just left it on the hard drive. When I plug the hard drive into my macbook it will show the music folder as having 50gb but when the folder is opened, none of the subfolders or files are visable.
    I went ahead and dragged the folder from my harddrive onto my macbook desktop. It took about an hour to transfer all the files but now the folder is sitting on my desktop and when I open it, it is empty. If i look in the folders info, it says it has the 50gb. If i try to drag and drop it into itunes nothing happens. If I drag and drop it into the itunes music folder, it will go there but will not show up on itunes.
    I'm stumped and no longer eligable for apples telephone support as I bought this macbook from a friend. Any help would be greatly appreciated. (Please use extreme lay terms as i'm just learning the lingo...thx)

    incase anyone is wondering, i figured out how to get the files onto the macbook. I transferred the files from my hard drive onto a flashdrive using my pc and when i plugged the flashdrive into the macbook the files showed up and could be dragged and dropped into itunes! yay!

  • Why is my External Hard Drive not showing in Aperture 3.6 Import?

    Why is my External Hard Drive not showing in Aperture 3.6 Import?
    Only my computer hard drive is and I want to import from an external drive.  I have always been able to until I updated to Aperture 3.6 and Yosemite.

    Only my computer hard drive is and I want to import from an external drive.  I have always been able to until I updated to Aperture 3.6 and Yosemite.
    I had the same problem. On the folders on the drive with the Aperture library did show in the Import panel. After I clicked the computer icon in the upper left corner of the Import panel, suddenly all drives appeared.
    You can also try to drag the folder you want to import into the Import panel, to point the file chooser to the drive.

  • HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

    abailey46 wrote:
    My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
    Sorry we are unclear as to the external hard drive and its connection to the TC..
    For instance the light that blinks.. is that the TC or external hard disk or what.
    Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
    Are you actually running Snow Leopard as the profile states?
    How old is the TC?

Maybe you are looking for