My external hard drives are causing problems when i capture DV in FCP

We have external hard drives (2 different brands lacie and WD) are causing dropped frames when I capture DV in FCP. This only happens when they are connected via firewire 800. When I connect them using USB everything works great. Any ideas why this could be? We have 2 of each drive and 2 older mac pros and they both have this issue with every combination of drives I try. I've also tried reseting the ports with no luck...

Connecting your camcorder to even 1 FW drive constitutes daisy-chaining. Even if you have two FW ports in your Mac, connecting a drive to one port and your camcorder to the other is the same as daisy-chaining as far as your Mac is concerned.
Try capuring from your camcorder with no exernal FW drives attached. Verify that works before trying anything else.
Also, I noticed your profile says you have a Mac Pro. You might consider adding a FW card in order to get extra FW ports that are not on the same FW bus as the built-in FW ports. Then you could connect your external FW drives to the card; and your camcorder to the built-in ports and it should work.

Similar Messages

Can you share an external hard drive over a network when your Apple Airport Extreme is in bridge mode?

Hello, is it possible to share an external hard drive over a network when I have my Airport Extreme in bridge mode? I can't use my AE as my main router at the moment but still want to be able to use the hard drive on the network, and the router I am using isn't capable of adding an external hard drive. I use Windows 7 and the other router is a Netgear. I have searched the communities and have not come across an answer to this question. I have tried several configurations within windows to try and see the hard drive but none have worked. I can see the hard drive when I run Airport utlities, but it cannot be seen on the network. Thanks to anyone who can help!

I think there is some confusion in this thread..
If you are sharing on a local LAN port forwarding is not required.
is it possible to share an external hard drive over a network when I have my Airport Extreme in bridge mode?
Answer is yes.. no port forwarding, mapping whatever term is used.. is needed. Port mapping is required when you cross over a NAT router.. as long as all the devices are inside a single LAN.. then no port mapping.
I assign to my Airport Extreme, do I do so with the settings of:
Service: SMB
Type: TCP
Server IP: xx.x.x.x
Port Start: 445
Port End: 445
This would not work even from WAN.. SMB is blocked by all responsible ISP.. there is simply too many unprotected windows machines out there. If they allowed SMB .. the world would be flooded with hijacked bots. And stolen data like bank accounts. SMB is not a secure protocol.
But this is not necessary on a LAN.
The problem can be Mavericks which does a terrible job presenting network drives.. The usual recommendations are to use AFP or force the connection to CIFS (ie SMB1 not 2).
If you use airport,, then use AFP.
In finder.. Go, Connect to server.
AFP://AEname or AEIPaddress. (replace with the network name of the AE or its actual IP address).
When asked for password.. type public if you did not change it or use whatever password you put.
Store the password in the keychain.

External hard drive are not shown

I recently got a new macbook pro, I plugged my external hard drives to the laptop and they don't show up, (they are not in the mac format), but they work perfectly fine with my imac, and my old macbook pro had no problems with it at all, I was wondering what's wrong with it? When the external hard drives are plugged, the lights on the hard drives work.
Thank you!

1. maybe it needs more power.
2. maybe it's already mounted but hidden:
     goto Terminal
     defaults write com.apple.finder AppleShowAllFiles TRUE
     killall Finder
               to undo that just replace "TRUE" with "FALSE"
          open Finder
          goto Menubar and select Go - Go to folder
          input: "/Volumes"
          see if it's there, if yes, trash it and try again
3. maybe your partiton or hdd it's damaged, try to backup and reinitialize the disk.
4. try a different usb port.

I created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song help

i created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song and i dont want to have to add all my music again, is there anyway of changing the location to a new folder all at once? for example, if it is my computer/harddrive/music/.... can i change it to mydocuments/musis/...
and having the exact same music folder so all the further directions are accurate?
thanks
please i need help

pass the music on your external hard drive to the computer then drag the to Itunes

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!

I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

My external hard drive does not show when I am trying to open a document in Office Org??

My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

Does the drive show up under 'Devices' in Finder?

I just got my first mac pro and I can't get the photos out of iPhotos moved on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. Thank you so much

I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much

How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

Organizing clips in external hard drive probably caused the problem

I wrote this to a friend and am posting it here because it is clearer than what I wrote last night. Lorna
Mon, Dec 24, 2007 10:27 AM PST
Xxxxx, thank you so much. I was and am very happy about that video but now that I have moved some iMovie '08 footage/clips folders around in my external hard drive, many of my clips in the Event Library (the raw footage, much like the Library in iPhoto) have disappeared and my video of Cheyenne does not play correctly. There are many little yellow triangles with question marks in them and irregularities which lead me to think that my housekeeping of iMovie '08 material in the external hard drive has bollixed up the works.
One thing I want to do is buy a good, good book on iMovie '08 .... one that explains about how to organize and store video clips etc. And then I have to learn that and understand it.
All of the clips that I lost, I still have in the original cassette of footage. Thank God I didn't decide to tape over it! However, I am uncertain about importing the clips again because I am not certain that just bring in new clips is going to make the old deficiencies all better again. Things have to connect right, pathways have to be right etc. And so I don't want to upload the footage until I have a better sense of how I should maintain/organize my movie materials.
That footage was mostly used for making the Cheyenne video, but there are also a lot of clips of ducks that came to our swimming pool and swam around in it for a while. I wanted my second video to be of them and of Cheyenne observing and chasing them.......... but now cannot, since all the clips in the Event Library are gone. The Rise Up videos are still there because they are newer and I didn't touch them in the iMovie '08 housekeeping I did yesterday.
I had a thought that I could go back in time with that special program called Time Machine, but am not certain that it would work with what I did in my EXTERNAL HARD DRIVE, as opposed to my iMac system. I suspect the answer to that is one which would bring me no relief
Anyhow, Xxxxxx, I am so glad that my Cheyenne video was uploaded to Web Gallery before I did the housekeeping chores and missed up my iMovie '08 clips.
I might copy this email and paste it into the iMovie '08 forum. ........
In spite of all this, I feel lucky and happy, Xxxxxx. I see this as just a small obstacle, but one having great significance about the importance of knowing how to handle/organize/store my clips, media stuff, etc. Lucky I learned this so soon. It could have happened when I had a lot of footage.
And this all hangs on my assumption that the cause of the problem is me mishandling/misorganizing the clips/media etc in my external 500 gig hard drive. It seems a logical assumption, though I could be wrong but I see no reason why the video would be working in iMovie '08 at 7 PM but malfuctoning right after I did the housecleaning. ............
Lorna
http://web.mac.com/lorna6

Yes it "disappears" from the "entire Library" but you can still view all images under "All Projects." Or you could easily make an Album of all images.
-Allen Wicks

UserEventAgent won't let me eject my external hard drive, and other problems

I'm running a MacBook Pro (2008-ish model) running Mountain Lion 10.8.2 with 4Gb of RAM and 750Gb of internal HD (the original 250Gb seriously cramped my style), and UserEventAgent is acting all weird.
Because of that old 250Gb HD, I was in the habit of storing files I didn't need at the time on an external hard drive, a LaCie 500Gb connected by FW800 (probably not relevant). And lately, whenever I plug it in, I can't eject it without forcing it to eject.
Using the "list open files" command and searching for that drive [ lsof | grep LaCie ] reveals that UserEvent drops an immediate hook in it for some reason. This connection is immediate, and short of force-quitting UserEventAgent in Activity Monitor at the exact moment I try to eject that drive, I can't disconnect it properly without forcing it or shutting down completely.
In fact, looking at UserEventAgent's open files and ports in Activity Monitor, something just plain doesn't look right:
/usr/libexec/UserEventAgent
/System/Library/Frameworks/Security.framework/PlugIns/csparser.bundle/Contents/M acOS/csparser
/private/var/folders/td/hnt8krzc8xj63p001s61rg7r0000gn/C/mds/mdsDirectory.db
/usr/share/icu/icudt49l.dat
/System/Library/UserEventPlugins/ACRRDaemon.plugin/Contents/MacOS/ACRRDaemon
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/heimdalodpac.bundle/Con tents/MacOS/heimdalodpac
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/LKDCLocate.bundle/Conte nts/MacOS/LKDCLocate
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/Reachability.bundle/Con tents/MacOS/Reachability
/System/Library/KerberosPlugins/KerberosFrameworkPlugins/SCKerberosConfig.bundle /Contents/MacOS/SCKerberosConfig
/System/Library/UserEventPlugins/AirPortUserAgent.plugin/Contents/MacOS/AirPortU serAgent
/System/Library/UserEventPlugins/AppleHIDMouseAgent.plugin/Contents/MacOS/AppleH IDMouseAgent
/private/var/db/mds/messages/se_SecurityMessages
/System/Library/UserEventPlugins/AssistantUEA.plugin/Contents/MacOS/AssistantUEA
/System/Library/UserEventPlugins/AutoTimeZone.plugin/Contents/MacOS/AutoTimeZone
/System/Library/UserEventPlugins/BTMMPortInUseAgent.plugin/Contents/MacOS/BTMMPo rtInUseAgent
/System/Library/UserEventPlugins/BluetoothUserAgent-Plugin.plugin/Contents/MacOS /BluetoothUserAgent-Plugin
/System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bund le/Contents/MacOS/AppleHDAHALPlugIn
/System/Library/UserEventPlugins/BonjourEvents.plugin/Contents/MacOS/BonjourEven ts
/System/Library/UserEventPlugins/CalendarMonitor.plugin/Contents/MacOS/CalendarM onitor
/System/Library/UserEventPlugins/CaptiveUserAgent.plugin/Contents/MacOS/CaptiveU serAgent
/System/Library/UserEventPlugins/DiskUnmountWatcher.plugin/Contents/MacOS/DiskUn mountWatcher
/System/Library/UserEventPlugins/EAPOLMonitor.plugin/Contents/MacOS/EAPOLMonitor
/System/Library/UserEventPlugins/GSSNotificationForwarder.plugin/Contents/MacOS/ GSSNotificationForwarder
/System/Library/UserEventPlugins/LocationMenu.plugin/Contents/MacOS/LocationMenu
/System/Library/UserEventPlugins/PrinterMonitor.plugin/Contents/MacOS/PrinterMon itor
/System/Library/UserEventPlugins/SCMonitor.plugin/Contents/MacOS/SCMonitor
/System/Library/UserEventPlugins/alfUIplugin.plugin/Contents/MacOS/alfUIplugin
/System/Library/UserEventPlugins/com.apple.SoftwareUpdate.UserNotification.plugi n/Contents/MacOS/com.apple.SoftwareUpdate.UserNotification
/System/Library/UserEventPlugins/com.apple.TimeMachine.plugin/Contents/MacOS/com .apple.TimeMachine
/System/Library/UserEventPlugins/com.apple.bonjour.plugin/Contents/MacOS/com.app le.bonjour
/System/Library/UserEventPlugins/com.apple.cfnotification.plugin/Contents/MacOS/ com.apple.cfnotification
/System/Library/UserEventPlugins/com.apple.dispatch.vfs.plugin/Contents/MacOS/co m.apple.dispatch.vfs
/System/Library/UserEventPlugins/com.apple.fsevents.matching.plugin/Contents/Mac OS/com.apple.fsevents.matching
/System/Library/UserEventPlugins/com.apple.iokit.matching.plugin/Contents/MacOS/ com.apple.iokit.matching
/System/Library/UserEventPlugins/com.apple.launchd.helper.plugin/Contents/MacOS/ com.apple.launchd.helper
/System/Library/UserEventPlugins/com.apple.locationd.events.plugin/Contents/MacO S/com.apple.locationd.events
/System/Library/UserEventPlugins/com.apple.notifyd.matching.plugin/Contents/MacO S/com.apple.notifyd.matching
/System/Library/UserEventPlugins/com.apple.rcdevent.matching.plugin/Contents/Mac OS/com.apple.rcdevent.matching
/System/Library/UserEventPlugins/com.apple.time.plugin/Contents/MacOS/com.apple. time
/System/Library/UserEventPlugins/com.apple.universalaccess.events.plugin/Content s/MacOS/com.apple.universalaccess.events
/System/Library/UserEventPlugins/com.apple.usernotificationcenter.matching.plugi n/Contents/MacOS/com.apple.usernotificationcenter.matching
/System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDLib.plugin/Con tents/MacOS/IOHIDLib
/private/var/folders/td/hnt8krzc8xj63p001s61rg7r0000gn/C/com.apple.LaunchService s-036501.csstore
/usr/lib/dyld
/private/var/db/dyld/dyld_shared_cache_x86_64
/dev/null
/dev/null
/dev/null
count=1, state=0x2
/dev/io8log
/Users/<username>/Library/Assistant/sync_flag
->0xc1a78b298c30c655
count=0, state=0
count=0, state=0
/private/etc/com.apple.screensharing.agent.launchd
/private/etc
/private
/usr/local/bin
/usr/local/bin
/usr/local
/usr
count=0, state=0
/private/var/db/PanicReporter
/private/var/db
/private/var
/private
count=0, state=0
/private/var/db/GPURestartReporter
/private/var/db
/private/var
/private
count=0, state=0
/private/etc
/private/etc
/private
count=0, state=0
/Users/<username>/Library/Services
/Users/<username>/Library
/Users/<username>
/Users
count=0, state=0
/Library
/Library
count=0, state=0
/Applications
/Applications/Utilities
/Applications
count=0, state=0
/Library/Caches
/Library/Caches
/Library
count=0, state=0
/Library/Preferences/com.apple.AirPortBaseStationAgent.launchd
/Library/Preferences
/Library
count=0, state=0
/Applications/Fun/Steam.app
/Applications/Fun
/Applications
/Volumes
/Volumes
The repetitions (I mean seriously, who needs three open connections to /dev/null?), and the multiple instances of "count=0, state=0", suggest that UserEventAgent is getting bad info from somewhere.
If I can track down what's making UserEventAgent imitate an overly amorous octopus, maybe I can straighten out this mess. But I wouldn't be surprised to find that this list has picked up funky smells and bad habits from all the earlier versions of OS X I've run.
Help? Please?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Why do files on an external hard drive appear as alias when connected to Time Capsual's USB?

Situation:
I have an old MacBook Pro (2008) and all of its USB and CD ports have stopped working (only the Ethernet port works). As a workaround, I purchased a 2TB Time Capsule, connected it via Ethernet to the MacBook Pro, and set up a wireless network that my MacBook Air (2010), ipads/pods, can connect.
Attempting to Accomplish:
1. Provide a back-up for my Pro since I cannot connect via USB
2. Move photos off my Air (to free up space) and combine with my Pro's library
3. Share files, music, and photos between all my devices (stored on both my Pro, Time Capsule, and external Maxtor hard drive)
Problem:
My last Pro back-up was to a Maxtor external hard drive. Also, all my Air photos are on the same external hard drive. I connected this hardrive to the Time Capsule. When I accessed the Maxtor from the Pro (through my new airport network) I can see the file hirearchy, but when I drill down to my Air's iPhoto library (back-up, latest, user, x, photos) the files appear with the alias symbol on them. The message I get when clicking is something about them being no longer connected. HOWEVER, when I attach this Maxtor via direct USB to my Air, both the Air backups and the Pro back ups appear as real files (no alias icon) and can be opened and transferred. When my Pro's ports worked I frequently shared files this way with no alias icons.
Disclaimer: I'm mac-savy enough that the genius bar is adding no real value/help, but not nearly as technical as most people on this board. And I'm very un-technical with networking. So if you can point me in the right direction, please "speak" simply =)

Ok, confirmed. It is NTFS and according to the permissions I can only read it. The frustrating thing is that it says:
    - Capacity: 74.53 GB
    - Available: 50.35 GB
    - Used: 24.18 GB on disk
and yet at the bottom of the file list it shows "0 items"
Now the dilemma. The harddrive on my Windows laptop is very small (30GB) so I cannot copy all of my pictures to it. I could hook the old harddrive and the new harddrive up to it at the same time and move them from old to new, however...
The new harddrive is supposed to only be for the Mac so my intention was to format it that way. Because I am not sure if/how I am going to need it to resolve this issue, the box hasn't even been opened...so the first question is long term would it be better to have the new harddrive MAC or FAT32 formatted?
I have been assuming that Mac formatting was the preferred route so I am still brainstorming on ways to get the files straight from the old harddrive to the Mac. Could it just be a matter of the files being hidden on the old harddrive? How do I unhide them?

What external hard drives are compatible w/ lion, snow leopard and time machine?

I am looking to buy an external hard drive to back up all data on my Macbook Pro that is currently running Snow Leopard, then upgrading to Lion. I want an external hard drive that is compatible with BOTH Snow Leopard (for use of creating a backup prior to my upgrade) and Lion (for daily use once I've upgraded). I also don't want to spend more than $100 if possible. Any suggestions? Thanks!

There is currently a shortage of drives due to flooding in one of the countries in which they are manufactured.
Getting one for under $100 at this point might be difficult. You didn't mention how full your current hard drive is, but for Time Machine, you should plan on two to three times the data you currently have (or expect to have).
I looked through Newegg's selection and didn't see more than a couple 1TB drives for less than $100. I recently bought a 3TB drive for $150. They're in the $200-$300 range, now.
I always buy bare drives and put them in an enclosure I buy separately. All the name-brand, ready-to-use drives come with a bunch of software you don't need and some of their software causes problems.
I had some bad luck/bad customer service with Seagate, so I've been buying Western Digital. Though, my replacement drives from Seagate have been going fine.
I've used Icy Dock and MacAlly enclosures. Both have worked well. If you do decide to go that route, you must make sure the enclosure can support the size of drive you buy (both physical--2.5" or 3.5", and storage size--1TB, 2TB, 3TB). The controllers in the cases may not be able to handle a 3TB drive, for example.
No matter how you go, you have to decide what kind of interface you want to use. USB is cheaper, but Firewire is faster. Firewire 800 is even faster, but costs more. All of that depends on what ports you have on the computer. OS X doesn't currently support USB 3.

Why do my external hard drives not free space when I delete things?

I have a Macbook Pro running Lion 10.7. I have a problem where my external hard drives tend not to free up space when I delete items from them. I have been resorting to regularly reformatting my drives for the pen drives, but now it is happening with my large backup drives. It happens for both OS-journaled and FAT-32 formatted disks. Any answers?
Update: I checked the hidden folders, and they comprise:
.feventsd
.Spotlight-V100
.Trashes
There are no sizes given for the hidden folders and it says I don't have persmission to see the contents of the trash.
Cheers,
Heather

When you move items to the trash, no space is freed since you're simply moving a file into a different folder (the .Trashes folder). When you empty the trash, the space will be freed. You must empty the trash while the external drive is connected for it to take effect.
Matt

Bought a MBA and am trying to keep iTunes files on an external hard drive. Having problems.

Hi, I bought a MBA 13" and want to keep my iTunes files on an external hard drive to save space.However, I keep running into problems. I can't get the iTunes Media folder to stay on the folder in my external hard drive. Whenever I unplug it, regardless if iTunes is open or not, it changes back to the media file on the MBA. I tried renaming the media folder and deleting it, but the computer just makes another if I do that and then ends up deleting my whole library, forcing me to load it all back from my hard drive. Can anyone help me out on this? Thanks.

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

External hard drives are now in my dock. How to remove forever?

For some reason, my four external hard drives and internal hard drive are now appearing in my dock. They cannot be dragged out (smoke poof), I can QUIT them and they are removed from the dock and remain on the desktop where they ought to be. But when the iMac is restarted, back to the dock they all go.
I was cleaning my mouse and I think this is the end result, beyong a clean mouse.
Any solutions to this situation?
Cheers.

Here is a screenshot of part of the Dock:
Here is a screenshot of the Desktop:

My external hard drives are causing problems when i capture DV in FCP

Similar Messages

Maybe you are looking for