My External has changed permissiomsions
Migarted files from MB pro using G-raid drive time machine. now i get... only on the g-raid... a permission error only when trying to load timelines in FCPX
Do you have "ignore permissions on this volume" set on the volume?
Similar Messages
-
I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?
Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine. -
Editing in External Editor Has Changed
Editing with an external editor in iPhoto has changed. If, when using an external editor like Photoshop. Pixelmator or Acorn, a second copy is immediately created in the Versions folder (formally Modified) of iPhoto and is used for the editing ending up with two copies of the photo, the original and edited.
If the edit creates layers, like adding text with PS or Pixelmator, the file must be flattened before saving. Otherwise the Save To navigation window appears with the Master/Originals folder as the default location. If saved there the copy that was first created remains just that, a copy of the original and the layered file is lost to iPhoto in the Masters folder. Bottom line, flatten the image before saving if the editor presents a Save to window.
Click to view full size
Additional edits by the external editor do not create another copy but are applied to the first edited copy. Therefore, any edit with an external will result in the two copies being displayed in iPhoto side by side.
Previously, flattening the image and saving as a jpg would have the modified version replace the original as the displayed version. just like when edited by iPhoto. No longer true with iPhoto 11.
OTOK, this whole thing is a bug I believe. Listen to this. I open a photo in CS5 to edit it. iPhoto makes a copy. I finish editing my photo in CS5, then save. The changes take place in iPhoto like you'd expect. Now there are the two photos in iPhoto. The edited and the unedited. Now I select the edited photo and choose "Revert to Original" from iPhoto menu, and iPhoto warns me like always, "are you sure you want to revert?" I click "Revert" and nothing. It doesn't revert to the original photo.
So if I were to delete the "extra" photo, I've now got no backup of that photo! I think iPhoto is just "showing" us the original backups on accident now. If this is how they intend it to be now, then they sure better warn people before everyone starts deleting their backup copies of their photos. This is crazy. -
The external model has changed. You must relink or refresh before this function can execute.
Good day!
I got the following error (code: -2366) when trying to run a executable built from LabVIEW 2013 on a target Windows machine with only LabVIEW run-time 2103 32-bit installed.
"External Model in VIname.vi/Control & Simulation Loop/VI <append>The external model has changed. You must relink or refresh before this function can execute.The external model has changed. You must relink or refresh before this function can execute."
The exe file works fine on the systems with full LabVIEW installed, but not on the ones having only run-time libraries. Dependency walker doesn't help to much.
Does anyone know what caused the issue? BTW, the VI needs 3rd-party dlls.
Thanks for your time and all replies are welcomed.
Regards,
YanHi,
Thanks for the reply. Actually I have found the problem.
In my VI, I have Control Design and Simulation Loop, in which I have a VI that call functions from a DLL that I put in LabVIEW resource folder. After building the EXE file from this VI, the DLL file is copied to the data folder.
But the problem is that when I run the EXE file, I have to make sure the DLL exists not only in the data folder, but also in the LabVIEW resource folder (E:\Program Files (x86)\National Instruments\LabVIEW 2013\resource), meaning when I run the EXE file on another machine with only run-time library installed, I have to manually create the whole path, and copy my DLL in.
I checked the EXE file and found the following folders, copied DLL to everyone of them, not working either...
National Instruments\Shared\LabVIEW Run-Time
c:\Program Files\National Instruments\Shared\LabVIEW Run-Time
%ProgramFiles%\National Instruments\Shared\LabVIEW Run-Time
SOFTWARE\National Instruments\LabVIEW
BTW I am using LabVIEW 2013 patch 2.
Thanks -
0FISCPER text variable "External Characteristic Value Key" has changed
Hello!
Could somebody help and tell, why in BI7.0 version (but 3.x RRMX version) the format of the 0FISCPER text variable (also other time characteristics) has changed from 001.2007 (version 3.x) to 0/1 .0700 (version 7.0)?
I cannot understand the logic of the new Exterternal characteristic calue key. What can I do about it?
Thanks for your help, gurus!
BR, Auli PeltolaI figured out myself the reason for the problem: in the new version the fiscal year variant has to be defined in report so that the 0FISCPER would work.
-
Another user has changed the row with primary key -Table changed externally
Hello,
I am facing the error: "Another user has changed the row with primary key oracle.jbo.Key[94 ]." during the delete operation.
User case scenario:
1. Added new row in the table.
2. Once new row is added to the the table, another application will update few columns in the newly added row based on some logic.
3. On the same session I am trying to delete the newly added row and getting above mentioned error.
I have added a "Button" in the table to partialRefresh the table to check the new values of the changed columns.
I have checked the forum and found many similar errors and tried the following but nothing helped.
1. By setting "Auto Refresh = True" for the view object.
Issue faced-> It worked fine but after few add and remove my db is getting to inconsistent state after which, I am not able to do any add/delete from my page.
Error: "Too many objects match the primary key oracle.jbo.Key". I have checked this and I am not getting this error when "Auto Refresh = False" even after multiple add and remove actions.
2. By Setting "Auto Refresh" the iterator associated with the page.
Issue -> Did not work at all.
Looking forward inputs from gurus.
Thanks
AbhijeetFinally I found one solution to this problem at: [ http://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/|http://www.avromroyfaderman.com/2008/05/bring-back-the-hobgoblin-dealing-with-rowinconsistentexception/]
Simply overriding the lock() method in the entity object resolved issue. Kudos to the author.
Code:
public void lock() {
try {
super.lock();
} catch (RowInconsistentException e) {
refresh(REFRESH_WITH_DB_ONLY_IF_UNCHANGED | REFRESH_CONTAINEES);
super.lock();
But, Now my refresh button is not working as depend on the "Auto Refresh = True" to update the table.
Can anyone tell me how can I refresh the VO of my table from the button.
Thanks
Abhijeet.
P.S: I have already added the partial trigger but it is work not working as the data is cached in the VO. Removing the Cached property for the VO is creating other problems. -
Hi
I have backed up itunes by copying my itunes file to an external hard drive. I try to keep my large media files (like TV shows) in a separate folder so that I can keep my hard drive on my macbook from filling up. Problem is, apple has changed the way Itunes is organized and backs up over the years. Now I am having a hard time keeping straight what is where. When I go to support, it has different instructions for the various versions of itunes. I am using version 10 now but it seems like I can't see all my files within the itunes music or media folder. I want to get everything in one place so that I can easily back up, regardless of which version of itunes I am running at the time.
I have selected to let itunes organize my files. It keeps all the files I have purchased in one place apparently, but items I have imported don't seem to always be there.
How can I best sort this out?I have, but if I don't have that particular external hard drive connected when my time machine backup hard drive is connected, then I don't think it is all backed up together. It is getting too complicated to get out all this equipment every time I want to buy some music.
-
JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
Hi,
I am developing a Fusion Web Application using Jdeveloper 11.1.2.1.0. I have a home.jspx page that has a ADF table built on efttBilling View Object. . When you click on one of the rows in the table, it will take you to detail.jspx where you can edit the row and save. When 'save' is clicked, stored procedures are executed to update/insert rows into few tables , and then go back to home.jspx where you need to see updated content for that row.
To get down to the exact issue, updates are made to the tables on which the efttBilling View Object is built using a stored procedure. Once this is done, I am trying to requery view object to see new content. But I keep getting JBO-25014: Another user has changed the row with primary key oracle.jbo.Key error. Following are the approaches I followed to query new results:
a. Executed Application Modules Commit Method. Created 'Commit' Action binding and tied it to homePageDef.xml. Called this binding from a view scope bean.
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding operationBinding = bindings.getOperationBinding("Commit");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty())
return null;
b. Marked 'Refresh on Insert' , 'Refresh on Update', 'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
c. Tried to Requery View Object. Created a refreshViewObject method in Application Module Impl.java file, exposed this method to the client interface and created a invokeMethod Action binding in home.jspx
Code in Application Module:
public void refresheftTransactionsforBillingAccountViewObj1View()
System.out.println("In eftTransactionsforBillingAccountViewObj1");
findViewObject("eftTransactionsforBillingAccountViewObj1").executeQuery();
Code in view scope bean
DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding operation =
bindings.getOperationBinding("refresheftTransactionsforBillingAccountViewObj1View");
operation.execute();
I have searched web, ADF forums and tried methods suggested in there but no sucess.
Could anyone please provide some insight in this issue. I have been battling with this since quite some time. I can provide you with the log file too.
Thanks!
Shai.What code does your Commit method have .. can you try using the Commit executable from the AM itself instead ?
Also -
Shai wrote:
'Change Indicator' checkboxes for all the attributes in the entities associated with efttBilling View Object.
which all attributes you set this property for . it should just be for History columns as such.
Did you also check if this could be your scenario ?
Decompiling ADF Binaries: Yet another reason for "JBO-25014: Another user has changed the row with primary key orac…
OR
JBO-25014: Another user has changed the row with primary key oracle.jbo.Key
OR
Another user has changed the row with primary key -Table changed externally
Message was edited by: SudiptoDesmukh -
"Your session has timed out, try again." is the message I get every time I try to purchase a song. My last purchase was june of this year, and nothing has changed since then.
I had this problem, but it was because I was clicking on an external link. Try instead going straight into iTunes, then going to the Podcast section. At the bottom of the "Podcast Quick Links" section, there's a text, "Submit a Podcast." Click on this instead. Once I did, I got to the same page as before, but it did process the feed.
Good luck! -
Monitor setup has changed - KDE Daemon after sleep
After the monitor goes into powersave mode and is restored I keep gettung the Monitor setup has changed - KDE Daemon box, anyone know how to get rid of this? everything seams to work but the box is getting annoying. Logs dont show anything wrong and I have tried lots of things to fix it with no solution.
Ok still cant work this out. manually set monitor settings etc the box still pops up when waking monotor from sleep. logs still show nothing. Can anyone help?
Log below
[ 11.918]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 11.918]
X.Org X Server 1.13.2.901 (1.13.3 RC 1)
Release Date: 2013-02-15
[ 11.918] X Protocol Version 11, Revision 0
[ 11.918] Build Operating System: Linux 3.7.5-1-ARCH x86_64
[ 11.918] Current Operating System: Linux ThunderBolt.LoadBalancer.Org 3.7.9-2-ARCH #1 SMP PREEMPT Mon Feb 25 12:04:25 CET 2013 x86_64
[ 11.918] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bc60faad-b008-4f1f-8682-88d4c6f235cc ro quiet
[ 11.918] Build Date: 18 February 2013 03:52:56PM
[ 11.918]
[ 11.918] Current version of pixman: 0.28.2
[ 11.918] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.918] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.918] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 6 17:45:33 2013
[ 12.161] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.326] (==) ServerLayout "ServerLayout0"
[ 12.326] (==) No screen section available. Using defaults.
[ 12.326] (**) |-->Screen "Default Screen Section" (0)
[ 12.326] (**) | |-->Monitor "<default monitor>"
[ 12.326] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12.326] (**) | |-->Device "Intel Graphics"
[ 12.326] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.326] (**) Option "BlankTime" "0"
[ 12.326] (**) Option "StandbyTime" "0"
[ 12.326] (**) Option "SuspendTime" "0"
[ 12.326] (**) Option "OffTime" "0"
[ 12.326] (==) Automatically adding devices
[ 12.326] (==) Automatically enabling devices
[ 12.326] (==) Automatically adding GPU devices
[ 12.513] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12.513] Entry deleted from font path.
[ 12.561] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12.561] Entry deleted from font path.
[ 12.561] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12.561] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12.561] Entry deleted from font path.
[ 12.561] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12.561] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 12.561] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.561] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.562] (II) Loader magic: 0x7fcc20
[ 12.562] (II) Module ABI versions:
[ 12.562] X.Org ANSI C Emulation: 0.4
[ 12.562] X.Org Video Driver: 13.1
[ 12.562] X.Org XInput driver : 18.0
[ 12.562] X.Org Server Extension : 7.0
[ 12.562] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 12.563] (--) PCI:*(0:0:2:0) 8086:2e22:1025:0251 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[ 12.563] (--) PCI: (0:0:2:1) 8086:2e23:1025:0251 rev 3, Mem @ 0xfe900000/1048576
[ 12.762] Initializing built-in extension Generic Event Extension
[ 12.763] Initializing built-in extension SHAPE
[ 12.763] Initializing built-in extension MIT-SHM
[ 12.763] Initializing built-in extension XInputExtension
[ 12.763] Initializing built-in extension XTEST
[ 12.763] Initializing built-in extension BIG-REQUESTS
[ 12.763] Initializing built-in extension SYNC
[ 12.763] Initializing built-in extension XKEYBOARD
[ 12.763] Initializing built-in extension XC-MISC
[ 12.763] Initializing built-in extension SECURITY
[ 12.763] Initializing built-in extension XINERAMA
[ 12.763] Initializing built-in extension XFIXES
[ 12.763] Initializing built-in extension RENDER
[ 12.763] Initializing built-in extension RANDR
[ 12.763] Initializing built-in extension COMPOSITE
[ 12.763] Initializing built-in extension DAMAGE
[ 12.763] Initializing built-in extension MIT-SCREEN-SAVER
[ 12.763] Initializing built-in extension DOUBLE-BUFFER
[ 12.763] Initializing built-in extension RECORD
[ 12.763] Initializing built-in extension DPMS
[ 12.763] Initializing built-in extension X-Resource
[ 12.763] Initializing built-in extension XVideo
[ 12.763] Initializing built-in extension XVideo-MotionCompensation
[ 12.763] Initializing built-in extension XFree86-VidModeExtension
[ 12.763] Initializing built-in extension XFree86-DGA
[ 12.763] Initializing built-in extension XFree86-DRI
[ 12.763] Initializing built-in extension DRI2
[ 12.763] (II) LoadModule: "glx"
[ 12.816] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.828] (II) Module glx: vendor="X.Org Foundation"
[ 12.829] compiled for 1.13.2.901, module version = 1.0.0
[ 12.829] ABI class: X.Org Server Extension, version 7.0
[ 12.829] (==) AIGLX enabled
[ 12.829] Loading extension GLX
[ 12.829] (II) LoadModule: "intel"
[ 12.853] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.078] (II) Module intel: vendor="X.Org Foundation"
[ 13.078] compiled for 1.13.2.901, module version = 2.21.3
[ 13.079] Module class: X.Org Video Driver
[ 13.079] ABI class: X.Org Video Driver, version 13.1
[ 13.079] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 13.079] (++) using VT number 7
[ 13.213] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.213] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.213] (==) intel(0): RGB weight 888
[ 13.213] (==) intel(0): Default visual is TrueColor
[ 13.213] (**) intel(0): Option "AccelMethod" "sna"
[ 13.213] (--) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
[ 13.213] (**) intel(0): Framebuffer tiled
[ 13.213] (**) intel(0): Pixmaps tiled
[ 13.213] (**) intel(0): "Tear free" disabled
[ 13.213] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 13.253] (II) intel(0): Output VGA1 has no monitor section
[ 13.362] (II) intel(0): Output HDMI1 using monitor section HDMI1
[ 13.403] (II) intel(0): Output DP1 has no monitor section
[ 13.443] (II) intel(0): EDID for output VGA1
[ 13.552] (II) intel(0): EDID for output HDMI1
[ 13.552] (II) intel(0): Manufacturer: GSM Model: 56cc Serial#: 258443
[ 13.552] (II) intel(0): Year: 2011 Week: 4
[ 13.552] (II) intel(0): EDID Version: 1.3
[ 13.552] (II) intel(0): Digital Display Input
[ 13.552] (II) intel(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 13.552] (II) intel(0): Gamma: 2.20
[ 13.552] (II) intel(0): No DPMS capabilities specified
[ 13.552] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.552] (II) intel(0): First detailed timing is preferred mode
[ 13.552] (II) intel(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
[ 13.552] (II) intel(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 13.552] (II) intel(0): Supported established timings:
[ 13.552] (II) intel(0): 640x480@60Hz
[ 13.552] (II) intel(0): 800x600@60Hz
[ 13.552] (II) intel(0): 1024x768@60Hz
[ 13.552] (II) intel(0): Manufacturer's mask: 0
[ 13.552] (II) intel(0): Supported standard timings:
[ 13.552] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 13.552] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.552] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 138.5 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 13.552] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.552] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 13.552] (II) intel(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 13.552] (II) intel(0): Monitor name: W2442
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.552] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 13.552] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 74.2 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 13.552] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 13.552] (II) intel(0): Supported detailed timing:
[ 13.552] (II) intel(0): clock: 27.0 MHz Image Size: 531 x 299 mm
[ 13.552] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 13.552] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 13.552] (II) intel(0): Number of EDID sections to follow: 1
[ 13.552] (II) intel(0): EDID (in hex):
[ 13.552] (II) intel(0): 00ffffffffffff001e6dcc568bf10300
[ 13.552] (II) intel(0): 0415010380351e780aaec5a2574a9c25
[ 13.552] (II) intel(0): 125054210800b3008180814001010101
[ 13.552] (II) intel(0): 0101010101011a3680a070381f403020
[ 13.552] (II) intel(0): 3500132b2100001a023a801871382d40
[ 13.552] (II) intel(0): 582c4500132b2100001e000000fd0038
[ 13.552] (II) intel(0): 3d1e530f000a202020202020000000fc
[ 13.552] (II) intel(0): 0057323434320a202020202020200128
[ 13.552] (II) intel(0): 020321f14e900403011412051f101300
[ 13.552] (II) intel(0): 000000230907078301000065030c0010
[ 13.552] (II) intel(0): 00023a801871382d40582c4500132b21
[ 13.552] (II) intel(0): 00001e011d8018711c1620582c250013
[ 13.552] (II) intel(0): 2b2100009e011d007251d01e206e2855
[ 13.552] (II) intel(0): 00132b2100001e8c0ad08a20e02d1010
[ 13.552] (II) intel(0): 3e9600132b2100001800000000000000
[ 13.552] (II) intel(0): 00000000000000000000000000000026
[ 13.552] (II) intel(0): Printing probed modes for output HDMI1
[ 13.552] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 13.552] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 13.552] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 13.552] (II) intel(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 13.552] (II) intel(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 13.552] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 13.552] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 13.552] (II) intel(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[ 13.552] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 13.552] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 13.552] (II) intel(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 13.552] (II) intel(0): Modeline "1366x768"x60.0 85.89 1366 1439 1583 1800 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 13.552] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 13.552] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 13.552] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 13.552] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 13.552] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 13.552] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 13.552] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 13.552] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 13.552] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 13.552] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13.552] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 13.593] (II) intel(0): EDID for output DP1
[ 13.593] (II) intel(0): Output VGA1 disconnected
[ 13.593] (II) intel(0): Output HDMI1 connected
[ 13.593] (II) intel(0): Output DP1 disconnected
[ 13.593] (II) intel(0): Using exact sizes for initial modes
[ 13.593] (II) intel(0): Output HDMI1 using initial mode 1920x1080
[ 13.593] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.593] (==) intel(0): DPI set to (96, 96)
[ 13.593] (II) Loading sub module "dri2"
[ 13.593] (II) LoadModule: "dri2"
[ 13.593] (II) Module "dri2" already built-in
[ 13.593] (==) Depth 24 pixmap format is 32 bpp
[ 13.793] (II) intel(0): SNA initialized with Broadwater/Crestline backend
[ 13.793] (==) intel(0): Backing store disabled
[ 13.793] (==) intel(0): Silken mouse enabled
[ 13.793] (II) intel(0): HW Cursor enabled
[ 13.793] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 13.794] (==) intel(0): DPMS enabled
[ 13.794] (II) intel(0): Overlay video not supported on this hardware
[ 13.794] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 13.794] (II) intel(0): [DRI2] Setup complete
[ 13.794] (II) intel(0): [DRI2] DRI driver: i965
[ 13.794] (II) intel(0): direct rendering: DRI2 Enabled
[ 13.794] (==) intel(0): hotplug detection: "enabled"
[ 13.794] (--) RandR disabled
[ 14.124] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 14.124] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 14.124] (II) AIGLX: enabled GLX_ARB_create_context
[ 14.124] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 14.124] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 14.124] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 14.124] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 14.124] (II) AIGLX: Loaded and initialized i965
[ 14.124] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.125] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 14.210] (II) intel(0): Setting screen physical size to 508 x 285
[ 14.922] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14.922] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.922] (II) LoadModule: "evdev"
[ 14.922] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.957] (II) Module evdev: vendor="X.Org Foundation"
[ 14.957] compiled for 1.13.0, module version = 2.7.3
[ 14.957] Module class: X.Org XInput Driver
[ 14.957] ABI class: X.Org XInput driver, version 18.0
[ 14.957] (II) Using input driver 'evdev' for 'Power Button'
[ 14.957] (**) Power Button: always reports core events
[ 14.957] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 14.957] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.957] (--) evdev: Power Button: Found keys
[ 14.957] (II) evdev: Power Button: Configuring as keyboard
[ 14.957] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 14.957] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.957] (**) Option "xkb_rules" "evdev"
[ 14.957] (**) Option "xkb_model" "evdev"
[ 14.957] (**) Option "xkb_layout" "us"
[ 14.988] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 14.988] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.988] (II) Using input driver 'evdev' for 'Power Button'
[ 14.988] (**) Power Button: always reports core events
[ 14.988] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 14.988] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.988] (--) evdev: Power Button: Found keys
[ 14.989] (II) evdev: Power Button: Configuring as keyboard
[ 14.989] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 14.989] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.989] (**) Option "xkb_rules" "evdev"
[ 14.989] (**) Option "xkb_model" "evdev"
[ 14.989] (**) Option "xkb_layout" "us"
[ 14.989] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 14.989] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event14)
[ 14.989] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[ 14.989] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[ 14.989] (**) UVC Camera (046d:0825): always reports core events
[ 14.989] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event14"
[ 14.989] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[ 14.989] (--) evdev: UVC Camera (046d:0825): Found keys
[ 14.989] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[ 14.989] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input14/event14"
[ 14.989] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 8)
[ 14.989] (**) Option "xkb_rules" "evdev"
[ 14.989] (**) Option "xkb_model" "evdev"
[ 14.989] (**) Option "xkb_layout" "us"
[ 14.990] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 14.990] (II) No input driver specified, ignoring this device.
[ 14.990] (II) This device may have been added with another device file.
[ 14.990] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[ 14.990] (II) No input driver specified, ignoring this device.
[ 14.990] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event11)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event12)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event13)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.991] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event6)
[ 14.991] (II) No input driver specified, ignoring this device.
[ 14.991] (II) This device may have been added with another device file.
[ 14.992] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[ 14.992] (II) No input driver specified, ignoring this device.
[ 14.992] (II) This device may have been added with another device file.
[ 14.992] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event8)
[ 14.992] (II) No input driver specified, ignoring this device.
[ 14.992] (II) This device may have been added with another device file.
[ 14.992] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event9)
[ 14.992] (II) No input driver specified, ignoring this device.
[ 14.992] (II) This device may have been added with another device file.
[ 14.993] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.993] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.993] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.993] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.993] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.993] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 14.993] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 14.993] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.993] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.993] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 14.993] (**) Option "xkb_rules" "evdev"
[ 14.993] (**) Option "xkb_model" "evdev"
[ 14.993] (**) Option "xkb_layout" "us"
[ 14.993] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 14.993] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 14.993] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 14.993] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 14.993] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 14.993] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 14.993] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 14.993] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 14.994] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 14.994] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.994] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 14.994] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 10)
[ 14.994] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 14.994] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 14.994] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 14.994] (II) No input driver specified, ignoring this device.
[ 14.994] (II) This device may have been added with another device file.
[ 14.994] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 14.994] (II) No input driver specified, ignoring this device.
[ 14.994] (II) This device may have been added with another device file.
[ 23.841] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 23.841] (II) intel(0): Using EDID range info for horizontal sync
[ 23.841] (II) intel(0): Using EDID range info for vertical refresh
[ 23.841] (II) intel(0): Printing DDC gathered Modelines:
[ 23.841] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 23.841] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 23.842] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 23.842] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 23.842] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.842] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23.842] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.842] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 23.842] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 23.842] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 23.842] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 23.842] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 23.842] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 23.842] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 23.884] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 24.108] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 24.108] (II) intel(0): Using hsync ranges from config file
[ 24.108] (II) intel(0): Using vrefresh ranges from config file
[ 24.108] (II) intel(0): Printing DDC gathered Modelines:
[ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 24.108] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 24.108] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 24.108] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.108] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.108] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.108] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.108] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 24.108] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 24.108] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 24.108] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 24.108] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 24.108] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 33.191] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 33.191] (II) intel(0): Using hsync ranges from config file
[ 33.191] (II) intel(0): Using vrefresh ranges from config file
[ 33.191] (II) intel(0): Printing DDC gathered Modelines:
[ 33.191] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 33.191] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 33.191] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 33.191] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 33.191] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 33.191] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 33.191] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 33.191] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 33.191] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 33.191] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 33.192] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 33.192] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 33.192] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 33.192] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 33.192] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 33.192] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 33.192] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 40.998] (II) intel(0): EDID vendor "GSM", prod id 22220
[ 40.998] (II) intel(0): Using hsync ranges from config file
[ 40.998] (II) intel(0): Using vrefresh ranges from config file
[ 40.998] (II) intel(0): Printing DDC gathered Modelines:
[ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 40.998] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 40.998] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 40.998] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 40.998] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 40.998] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 40.998] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 40.998] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 40.998] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 40.998] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 40.998] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 40.998] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 40.998] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 936.094] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: AT Translated Set 2 keyboard: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: UVC Camera (046d:0825): Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: Power Button: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.094] (II) evdev: Power Button: Close
[ 936.094] (II) UnloadModule: "evdev"
[ 936.194] Server terminated successfully (0). Closing log file.
kde log
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(7126) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(7120)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(7120)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
klauncher(7543) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(7537)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(7537)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
kdmgreet: Fatal IO error: client killed
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(326) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(285)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(285)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(341) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(294)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(294)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(273) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(264)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(264)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
klauncher(857) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(847)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(847)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
klauncher(1223) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(1215)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(1215)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Can't find file "uk" for symbols include
> Exiting
> Abandoning symbols file "default"
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(269) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(263)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(263)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(706) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(700)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(700)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(2630) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2624)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(2624)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(3118) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(3112)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(3112)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(4638) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(4632)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(4632)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
klauncher(5014) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(5008)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(5008)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Compat map for group 2 redefined
> Using new definition
> Warning: Compat map for group 3 redefined
> Using new definition
> Warning: Compat map for group 4 redefined
> Using new definition
Errors from xkbcomp are not fatal to the X server
Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extensio -
Message "Backup disk identification has changed since the last copy"
Hello!
I have MD033 Time Capsule and my iMac 2012 and MacBook Pro connected to it. Time Machine is set to backup @ this disk.
Every once in a while I get the message you see in attach on my machines. Approximately it means "Your backup disk identificator has changed since the last backup (Possible reason the disk was changed or erased since the last backup or someone is trying to make you make aт illegal backup not on your disk "
I get this message from time to time both on iMac and MacBook but not simulateoneously. Once in a week or a month.
I already reinstalled anew systems on my machines and even replaced time capsule itself to the same model (absolutely new, factory sealed), not even mentioning formatting its disk a dozen times and resetting TC.
Does someone have same problem? Russian support couldn't help and directs me to a repair. But I really doubt that BOTH MacBook Pro and iMac have EXACTLY the same problem with TC. Everything seems as it is a software problem with some of the programfrood42frood42 wrote:
today, my MacBook shows a Message "The identity of the backup disk has changed since the previous backup."
Welcome to Apple's discussion groups.
It may not show anything useful, but try this: Disconnect all external and network volumes. In the Finder invoke the menu option Go > Go to Folder. In the resulting field type "/Volumes" (without the quotes) and click "Go". In the resulting window you should only see entries for any internal volumes. If you see anything else, particularly an item with the same name as your Time Machine volume, you may have the problem described in this article:
http://db.tidbits.com/article/9620
You should trash any such things. The way to prevent this in the future is to prevent any process from running that would write to external volumes that aren't mounted. For Time Machine, turn it off, then when you want to back up, mount the Time Machine volume and choose "Back Up Now" from the Time Machine menu item. -
just replaced my broken iphone with a replacement. Now when I try to sync my audiobook library i get a warning that all of my music, etc will be deleted. I can drag and drop but it's a pain in the ***. What has changed?
Click: Restoring your iTunes Library backup (from an external drive) here > iTunes: Back up your iTunes library by copying to an external hard drive
BTW, if you are a resident of the U.S, have iTunes 10.3 or later, and iOS 4.3.3, you can re download your iTunes purchases for free.
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
"The identity of the backup disk has changed..."
About 3 months ago I purchased my new MacBook Pro plus two WD 2TB network drives for Time Machine backups. One drive is kept at home and the other is at my office. (I believe in having backups at two physical locations.)
The drives at both places are identical, with identical names and in both cases are connected to a BT router/DSL modem.
All has been working nearly perfectly. (I say almost, because occasionally at home I'll get an error saying a backup couldn't be made because the disk wasn't available. Usually this clears up after a few subsequent attempts, or always after a reboot. Fortunately this doesn't happen often.)
However, I'm now getting an error message every time I move from one location to the other:
"The identity of the backup disk has changed since the previous backup.
The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk."
Fortunately, the dialog box is very visible and gives the option of going ahead and using the disk...which I do. As long as I'm in the same location, everything then continues to work without issue.
This is most odd, as neither disk name has been changed and I was working for 3 months without anything like this happening.
(I might add, with my previous Powerbook, I had an identical Firewire drive at both locations and having the dual backups worked flawlessly without issue for the entire time I used it...nearly two years.)
Anyone have any idea why this weird message is now surfacing after 3 months of working fine?Pondini wrote:
There was a thread here a few months ago with a very nasty problem, where a user had 3 or 4 identical WD externals, with different names, and was trying to use one with Time Machine. But Time Machine would try to back up to the first one connected, regardless of name!
I didn't think it was possible, but sure enough, they all had the identical UUID from WD (they'd come formatted for a Mac, and the user had never reformatted or erased them, so OSX never put new UUIDs on them).
I wonder if the UUID would be copied over if a disk is cloned? When using my first pair of external LaCie Firewire drives, I first set just one up as a TM backup. After the setup and first backup was finished, I used Carbon Copy Cloner to create an exact duplicate to the second drive. I did that deliberately in hopes TM wouldn't be able to tell the difference. It apparently worked as I could connect either disk and Time Machine would readily connect without complaint. Either the cloning procedure worked, or perhaps the drives already had identical UUID's as happened with the WD drives you mentioned. Any thoughts on this?
Pondini wrote:
If you haven't, try turning Time Machine OFF before you get that message. Then select the NAS via Time Machine Preferences > Select Disk. I think that will reset the element in the plist mentioned in that thread, and the problem will go away.
I went ahead and tried this, but the condition still persists. When I have a chance, I'll go back and look at that other thread and see if I can glean anything useful from it. In the meantime, I may just have to live with the current situation. Thanks. -
Lync 2013 Android - your server configuration has changed. Please restart Lync
Lync 2013 on Android devices is giving error after every 5 minute "your server configuration has changed. Please restart Lync".
Calls gets dropped when this error occurs.
we are using server 2012 R2 as reverse proxy and have changed the Proxy time out for External web service URL to 960 secs with no luck.Hi M.Irfan84,
I would like to confirm the following information.
1. Do we have run “iisreset /noforce” to apply the change?
2. And does this issue only impact on Android device?
Best regards,
Eric -
Hi all,
Could anyone help me on this ?
When opening this VI (see attachement) on one computer it says that the VI was changed (external component changed) and that I have to save it. When I save it and open the VI again on a second computer, LabView outputs the same message, an external component has changed... so I have to save it... Back on the frist computer same message again... etc...
I still don't know what's the 'external component' that changes from one computer to another... and how to find it.
Thanks in advance for any help or hint...
Attachments:
untitled.JPG 119 KBOk, this is one of these VI's that have an external component changing...
As I said Before, when I open this Vi in two different computers, LabView tels me each time that an external component has changed and that I have to save it. I don't know what is the external component changing... how to find it ?
Thanks.
Attachments:
ADO Connection Open.vi 14 KB
Maybe you are looking for
-
I am looking for a app for my toshiba tablet (android) that i can use to transfer my ipod music
i am looking for an app for my toshiba tablet so i can trans music from nano to tablet
-
CM25: Sort standard table based on custom table.
Hi Experts, I need to sort the CM25 capacity table based on a ZTABLE where we will define the sequence number of each material. So when CM25 is executed the material should get sorted based on sequence number maintained in Ztable. Now the challenge i
-
Proper video card to run a 23" display on a PC
I am trying to set up a HP Media Center PC and G4 Mirror Door on a DVI KVM switch. My goal is to view the desktop of each on my 23" Cinema Display, but in order to do so I need a DVI video card that will push the widescreen format. Any recommendation
-
My iPad keeps freezing! Any idea why? iCloud storage is completely 100% available.
My iPad keeps freezing. iCloud storage is completely empty. I have 2.3 GB available of the total 13.6. Please help!! This is starting to become a pain in my butt.
-
When trying to burn files (1,7 GB) to a Memorex DVD, an error messge says: Impossible to burn the disk because communication between disk player and computer failed (error code # 0x80020022). Is the Memorex incompatible with my i-Mac or what could i