My external HD is approaching 95% fill. What next?

I have several WD Mybook HD's. I also own a huge CD collection that I am importing into iTunes. If I connect the HDs, can iTunes use multiple iTunes folders? I am halfway through my collection and know there isn't enough room in this drive. Can I create multiple iTunes Folders, and place them in different drives? If I do this, will iTunes continue to list all the content in the folders? It doesn't seem possible that the iTunes folder has to be entirely on one drive, right?

Eiher follow the instructions in this article, or turn off the option in the Advanced section of the iTunes preferences to copy the files to the iTunes music folder, drag the songs from the CDs to the drives in the Finder, and then drag them into the open iTunes window.
(35331)

Similar Messages

  • I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

    I have a Windows 7 laptop using I tunes 64 and all my music files are
    on an external disc. I rarely use I tunes and at one point moved all my files
    (including the music files) from one external disc to another without
    considering what affect this would have on the I tunes library. When I eventually
    attempted to use I tunes, every selected a song from the library resulted in a
    message stating that the file couldn't be located. After following some of the procedures
    explained in this community I was able to reconnect the library back to where
    the associated music files are presently stored. However, there are still 2
    problems that need to be corrected. 1) Every song file now has a duplicate. One
    file works and the other file will result in the same message stating that the
    file couldn't be located. Before there were 4,000 songs in the library, now
    there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
    the playlists are still associated with the dead song files which makes the
    playlists unusable. Can the playlists be reconnected to the usable files
    without manually having to recreate them? Thanks in advance for the help.
    sdkr

    So am I understanding correctly?
    You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
    If you used drag and drop your choices are different than if you used iTunes to transfer.
    Good luck!

  • Since I have installed Lion onto my iMac it's impossible to to copy any video file from the mac to an external support (ups-stick, Timecapsule). What's happened? What can I do?

    Since I have installed Lion onto my iMac it's impossible to to copy any video file from the mac to an external support (ups-stick, Timecapsule). What's happened? What can I do?

    If you just did upgrade Lion, give it some time. I recall having similar problems and some articles mention heavy background work after install - such as re-indexing for Spotlight etc. I couldn't even copy from folder to folder or e.g. iphoto to folder on the same disk. Went away after a day or two though.
    I do however still have a problem with AFP access to one of the lion machines - kills it's network adaptors rather quickly. No luck solving this so far :|

  • If I wanted to connect an external hard drive to my iPad, what can I use? Do I have to use the Mac mini??

    If i wanted to connect an external hard drive to my iPad, what can I use? Or would I have to purchase a Mac mini?

    Sorry, I DO NOT RECOMMEND the camera connection kit for what you are asking!
    I was trying to say that as I have the connection kit (bought for camera use so no loss for me)
    I often WISH it could do more.
    So sorry for the confusion.
    The camera connection kit only allows you to send photos and video (that are correctly formatted I might add) to the photos app.
    Other people have had success with it connecting to keyboards, but that us not so useful.

  • HT201269 ive recently got a new iPhone 5s due to my old one breaking, it has been sync'd but has now been showing the black apple loading screen for the last 3 hours with less than a quarter of the bar filled. what do i do?

    ive recently got a new iPhone 5s due to my old one breaking, it has been sync'd but has now been showing the black apple loading screen for the last 3 hours with less than a quarter of the bar filled. what do i do?

    Take it back to where you purchased the device and get another device.

  • When using time capsule on a PC based network, how does it appeare on the network ? like a normal shared external HDD ??? or what ?

    when using time capsule on a PC based network, how does it appeare on the network ? like a normal shared external HDD ??? or what ?

    Yes, it will show you the main directory.. so if you link in windows explorer it will be..
    \\TCname\data
    Or \\TCipaddress\data
    Data can be whatever name the main (root) directory of the TC is called.

  • Some letters on my external keyboard are not working. What going on?

    Some of the letters on my external keyboard are not working. What's going on?

    Are you certain you are using a keyboard layout that matches the hardware layout?
    Check here:
    Settings > General >Keyboard >Keyboards

  • G5 upgraded to Leopard - failed - installed Tiger on EHD - what next?

    When my G5 iMac failed, the repairers put in a new power supply and a new HD. But they had no Tiger instal disks and I didn't think to supply mine. So they gave me Leopard instead (but no disks). Since then I have seen faults develop, mostly at login :
    1. sometimes not getting past the spinning gear wheel (switch off, on, usually ok)
    2. trying to log-out of login account - logs back into login account, no login screen (Restart usually fixed this)
    3. having got past that, once - in admin account - 'Save' didn't function in any app (Restart fixed that)
    4. on another occasion, 'Copy' wouldn't work in any app (Restart fixed)
    Once these login problems had been fixed (they didn't happen every day), the Mac would function fine for the rest of the day - no problems.
    Today - I tried to login, it got as far as the 'spinning gear' and then made a loud fan noise. Switching off, on, trying again, didn't work : I got the same thing every time.
    So, I installed Tiger from my disks, onto an external drive. This seems to have worked fine. With the Tiger OS installed there, I can make the Mac run from the eHD, and went through the whole Welcome / Start-up routine. This included setting up a main account, which I gave the same name, same short name, and same password as on the Mac itself.
    This has given me access to my main account's files on the Mac's own HD - I can see everything there (is this because I used the same name and password?), but not the contents of other accounts on my Mac's HD (the usual red 'no access' symbol).
    At this point I have decided to halt. Email on the Mac uses Mail 3 (for Leopard) so I dare not try to access it using Mail 2 (Tiger) from the eHD. iLife on the Tiger install disks / eHD is earlier than the iLife 06 I have been running, so I am not going to run those either in case I mess anything up. I am running Safari on a Windows netbook. I am not going to risk iTunes.
    Now that I am running Tiger from my eHD, but not daring to do much except access my documents, (I can get some email, and use Safari on the Windows netbook) - what should my next move be? Obviously the hardware of the Mac seems to be ok - the HD shows up and everything on it seems fine as far as I can see. It just won't boot Leopard any more.
    In the longer term, I suppose the repairers need to reinstall Tiger for me and migrate all my data across? I will miss Quicklook, but at least I will get Photoshop back (PS7 won't run in Leopard).
    In the meantime, what should I do on a day-to-day basis? Keep running Tiger from the eHD? How do I get it to launch that way once I've switched everything off?

    Hi
    +" . . . but not the contents of other accounts on my Mac's HD (the usual red 'no access' symbol)"+
    You should be able to get around this by simply selecting the internal drive and selecting Get Info from the Finder Menu. At the bottom of the resulting window you should be able to select the "Ignore Permissions on this drive" option. Failing that you could enable root (use NetInfo Utility to do this) and log in as root. You then have access to everything. Copy off what you want to the external drive.
    From what you've described it does sound like the internal drive is having a problem? Have you tried to repair it yet using Disk Utility? Once you've backed up everything you could try reformatting the drive and cloning back the working 10.4 OS from your external drive. You can use what's already built in or CarbonCopyCloner:
    http://www.bombich.com/
    Alternatively you could try repairing the drive using something like this:
    http://www.alsoft.com/diskwarrior/
    +"How do I get it to launch that way once I've switched everything off?"+
    Select the drive you wish to boot from using the Startup Disk Preferences Pane. Alternatively when switching on your computer again hold down the alt key and select the relevant drive.
    Tony

  • HT201210 Restore me when I'm trying to fill his next character . The disk you are attempting to use is full If I have 20 GB of memory.

    Restore me when I'm trying to fill his next character
    . The disk you are attempting to use is full
    If I have 20 GB of memory.
    thank you.

    Hi and welcome to Apple Discussions.
    Irrespective of your iTunes downloads you are going to run into serious problems with only 1GB of free space. The general recommendation on these forums is that one should have 10% free space as a minimum or 15% as an ideal.
    Having as little as 1GB could result in system corruption or, at worst, HD damage. I recommend that you free up some space as a matter of urgency.
    If you would like any guidance on what is safe to remove post back but a good starter, often neglected, is to empty your Trash.
    Good luck,
    Adrian

  • Disk Failure: what next?

    my late 2012 iMac slowed to unusuable state after Yosemite upgrade then on reboot it failed.  After verbose reboot and disk utility verify/repair I'm at the state that it is unrepairable.  So, what next?
    disk utility tells me to copy everything I can, then reformat and restore what I copied.  Is it as simple as this?  Won't I still be on the same failed HDD? 
    I have a cloud based backup of all my documents and settings, but not a disk image.  So I'm thinking I can do one of the following:
    1). Do as I think disk utility is telling me and transfer the full disk image to and external use drive I have, reformat the internal drive, then copy the image back.  This sounds too good to be true?
    2.). Get a copy of my documents from the cloud service, reformat and reinstall OS X from disc utility, copy over my documents?  I assume I would have to reinstall my apps going this route.
    3). I need to get a new physical internal drive installed by an apple place and let them do the transfer ( what does that run? US$)
    4) some other option
    thanks for any input!

    If you wish to prove to yourself the need for a new drive, then you will need to re-partition and reformat it, then install OS X on it. If it still won't work properly then the drive is probably bad. The Yosemite upgrade had nothing to do with it. A new upgrade won't kill the drive, but it can cause problems to appear that have always been present.

  • Ipod touch doesn't sync to itunes? it goes to  Picassa (a camera photo software). Ive deleted picassa from computer. what next?

    new ipod touch not syncing to itunes. nothing happening. I think Picassa on my computer picked it up! i deleted that program. what next?

    Thanks a lot, I didn't know the feature iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer.
    I solved my problem.

  • After cancellation thru J1IH of excise Invoice, what next to be updated

    after cancellation thru J1IH of excise Invoice,
    i got a message showing as "excise JV 7000153976 accounting number 8210002575 with part 2SI  7110001859 has been successfully created"**
    what next to be updated in further levels to complete all the process in FI as well as Excise Documents

    hi
    plz check the document year for inprocess and posted doc
    now steps for excise invoice cancellation will be as follows
    1  cancel MIRO document with MR8M
    2  cancel MIGO document in MIGO
    3 goto J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO)
    4 now in misclinious tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
    5 now ur invoice is cancelled and u can go for new GR and new postings
    regards
    kunal

  • My 4TB G-Drive failed after (Firewire) installation of Maverick.  A 1TB G-drive using USB works.  What next?

    I have an IMac running OS X 10.9.1.
    I purchased a new 4TB G-Drive.  After installation with Time Machine the drive correctly made backups for about 2 weeks.  I installed Maverick.
    Then I began to see the message “Unable to complete backup. An error occurred while creating the backup folder”
    I called G-Technology. Using the erase function of Disc Utility we received the message “Disk erase failed.  Disk Erase failed with the error: Couldn’t unmount disk”. It was determined that the disk was bad and I returned it to the vendor.
    A second and then a third disk experienced similar failures after only two backups.  G-Technology then said the problem was a computer problem
    I called Apple support and allowed them access to my computer.  After their intervention the disk worked for two backups and then failed.
    I purchased a 1 TB G-Drive yesterday.
    I thought I would give it a test and so I made it the backup drive for time machine.  It made a primary backup and has been continuing to back up without the feared error message.
    I went to the internet and have discovered that my problem has been experienced by others. It only occurs after an upgrade to Maverick.
    It also only occurs with a Firewire connection.
    The new drive has a USB connector.  It works fine.
    What next?

    Which iMac (please be very specific) and also why have you not updated to 10.9.2?

  • HT201263 Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTune

    Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.

    Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
    I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
    It's still under 1yr warranty so will have to take to a dealer.
    I'm sorry that's not much help for you but at least you know it's not a unique problem.
    PC   Windows XP  

  • HT203055 I can't sign in or out of iCloud.  Forgot the password to an email address I no longer have access to.  What next.

    I can't sign in or out of iCloud.  Forgot the password to an email address I no longer have access to.  What next?  From what I'm reading in the forums, once the email address is set up it cannot be changed.  True?  If so, um, stupid.
    Message to log in to iCloud every time I reply or forward an email.  Have to indicate to ignore every time.  Annoying.

    Hello florabb,
    You may be able to change or reset the password on this old iCloud/Apple ID account, even if you no longer have access to the email address associated with it. Once the password is changed/updated, you should be able to log your iPhone out of the old iCloud/Apple ID account and log in to the correct new account. You may find the information and steps outlined in the following articles helpful:
    If you forgot your Apple ID password - Apple Support
    If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
    Sign in with a different Apple ID on your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    - Brenden

Maybe you are looking for

  • How to use commons.logging in weblogic (8.1)?

    Greetings, I'm trying to use commons.logging framework to manage the logs of my application. With Weblogic I will use an implementation that works with weblogic.logging package but with other J2EE products I'll use another native log implementations

  • Opening PDF causes spare Hard drive to spin up

    Hello,       I use Adobe Web Premium CS3 on my desktop. The OS and software are installed on the primary drive. I have a spare hard drive on the desktop that is used infrequently. After an hour of using my desktop, the spare drive usually spins down

  • Please help me my iphone 4 switch off and not working

    please help me my iphone switch off and not working

  • @ManyToMany using Composite Key

    I have searched this forum concerning this issue. While I see others with a similar question, I see very little on a possible solution. Here is my problem statement. Class 1: Document.java Class 2: Collection.java Class 3: CollectionType.java XRef Ta

  • Why won't Firefox stay installed?

    When I log into Firefox, it keeps telling me I'm not on the most current version. I download it, install it, and when I come back to it after an IE session, it's gone. Also, it is not staying "stuck" even though I've tried to make it my default brows