My external HD(Lacie triple interface) won't unmount!

I backed up 30 GB worth of itunes folder onto my ext HD (250GB) and now i cannot get it to stop running.. it keeps giving out that annoying sound that it is working..it has been 24 hours.. the HD also has some valuable FCP footage.. I tried grep lsof to look for open files, didnt come up with anything..
I can still find it under the disk utility.. I dont want to lose the data on it so didnt try the repair option
Any help would be most appreciated..
Panicking in Boston

Hello,
There might be something help here: http://forums.macosxhints.com/archive/index.php/t-42044.html
Carolyn

Similar Messages

Can I use a MY Book Pro external 500 gig Triple interface HD with FCE?

Hey everyone,
I just recently bought a Macbook pro and purchased FCE HD 3.5. I want to purchase a high capacity external HD. I want it mainly for my projects with FCE and other members of the family will be backing up to it. I want to keep my projects on the external and work on them from there not my main HD.
After doing some online research I was about to purchase the LaCie Big Disk Extreme. However there seemed to be a lot of bad reviews about early disk failures. The G Technology drives sound great but are a little pricey.
I came across the MY Book Pro addition 500 gig Triple interface HD from Western Digital and found that the 500 gig pro had similar spec to the LaCie but they never mention in the specs that it can be used for video editing. They only mention "Fast enough for video editing" in the 1TB raid 0 version. I'm just wondering if anyone is having success using the My Book Pro Edition. I checked the forums first and even check specs from apple on external drives and FCE but I was hope for some real use advise. I'm not trying to cheap out, I'm just trying not to buy a lemon & get the most storage and speed for my buck. I'll buy they higher end if I should. My video productions right now are 10 minute long movies with some video clips and stills but I'm hoping to advance to bigger (High Def) things. Any advise in this matter would be greatly appreciated.
The specs from Western Digital are as follows:
My Book™ Pro Edition™
External Hard Drives
500 GB, Triple Interface
Rotational Speed
7,200 RPM (nominal)
Average Latency
4.20 ms (nominal)
Seek Times
Read Seek Time
8.9 ms
Track-To-Track Seek Time
2.0 ms (average)
Serial Transfer Rate
FireWire 800
Serial Bus Transfer Rate (1394b)
800 Mbits/s (Max)
Macbook Pro 17" 2.33GHz Intel Core 2 Duo Mac OS X (10.4.8)

The 500GB MyBook Pro should work fine. Just be sure to use a Firewire connection (not USB) to your Mac and format the drive as Mac OS Extended - Journaled. It will come from the factory as FAT32, so you'll need to reformat it. But wait - don't reformat it until you offload the ButtonManager, FW Driver and Retrospect software. You will need the first two to install your drive.
And that's one of the reasons I stay away from the MyBook drives - they were really designed for Windows systems, not Macs. For one, they have their own FireWire drivers and I see no reason to be required to install device-specific drivers on my Mac in order to use a consumer-grade hard drive. As far as I'm concerned, that's just bad design (or, perhaps design for systems other than Macs ...).
The 500GB Lacie Big Disk did get a bunch of bad reviews. However, the 500GB Lacie d2 Extreme is the same price and has much better reviews. The Lacie d2 Extreme drives are quite reliable; I have many and not one of them has failed me over the years. The 320GB d2 Extreme is currently $140 at newegg.com. See how that compares to the price of the MyBook.

EXTERNAL IOMEGA TRIPLE INTERFACE

Hello, I'm new here, and would like to ask a question re: Iomega Triple Interface external hard drive.
I need to store info in a separate place, and have no dvd record mode on this computer, and there is a good deal TODAY only on the above Iomega storage.
Having read these boards, people seem to be either very much for or equally against Iomega. I've used their Zip drives before which were fine. Could someone just give me a simple answser as to whether or not this external hard drive would be OK for me, i just need to drag and drop, I do not have a great deal of stuff on my computer, but need to keep it really badly, for legal reasons. Having had an earlier Mac destroyed by a 'certified' apple dealer before, and having as a result had to have my hard drive info retreived at huge cost by DriveSavers, I would like to avoid that.
Looking forward to hearing from you.
Also, what kind of FireWire connector do I need for this computer, as the Iomega doesn't come with a Fire Wire lead for some reason. Is it a 6pin connector, or a 4 pin.
I only have FireWire 400.
Thanks so much.
ibook G3 800 mhz Mac OS X (10.2.x) using OS 10.2.8, also 0S9 Classic

re my question.......too late , iomega has sold out. so, no need for anyone to answer.

External Lacie Hard Drive Won't Show On Desktop

Hello,
I have a LaCie d2 Hard Drive Extreme with Triple Interface. I know this topic has been posted before but nothing seems to be working for me. The hard drive will not show on my desktop, but it does show up in the Disk Utility. It's there, but I can't access it.
I have disconnected the drive many times. I have repaired the permissions on both drives more than once. I have swapped cables between firewire and USB. I have tried shutting down everything, unplugging everything and waiting 15 mintues before turning everything on. (Three times) (I have tried turning the computer on before connecting the drive, no good. I tried again with the drive already plugged in, no good, and also tried turning the computer on, then plugging the drive in and turning it on.
I have another LaCie Hard Drive, The one that has the design by F.A. Porsche and is 250GB. This drive connects perfectly. I don't understand. Hope someone out there can help me out, take care,
Tom

has the Lacie HD been formatted by another computer?

LaCie d2 HD Triple Interface - Connect to 2 Units

Hello,
we gave a Lacy Hard Drive with a Triple Interface, Can we hook up 2 macs to it instead of sharing over the WIFI?
Thank u
DUAL 2GHZ G5

Hello! Only if you want to try and really mess things up. A read/write from both computers at the same time would be a disaster so I wouldn't attempt it. The only exception would be firewire target disk mode. Tom

Lacie won't unmount

Greetings Gurus,
I took part of my system home to do some work over the holidays and am now having trouble unmounting my Lacie BigDiskExtremeTriple. This drive has always been connected to my Dual G5 desktop (profile listed below), but I'd hoped to get some work done on the MBPro 17.
Here's what info I have so far:
I believe the problem started from having several external FW drives looped through a Belkin FW hub (sorry, no specs on it right now other than 3 FW 6pin ports on each side of the hub) - computer froze and I had to reboot.
I believe this caused some possible directory damage to the Lacie since I had been unable to 'unmount' the drive properly.
Support and Google searches have offered several things to try, but none have resolved the issue yet. Most suggest a 'directory issue with the drive' that Disk Warrior may fix. I have DW3.0, but also read that it's not going to work if the drive won't unmount in Disk Utility (which it wont')
Here is what I've tried so far.
any usage of Finder/Spotlight locks up the system.
Drive seems to work, though I've delayed pushing it with apps (mostly FCStudio), until I can resolve the issue.
Force Quit Finder - have been able to then unmount the drive once or twice, but usually not.
Restart Mac - can usually then unmount the drive, but not always
Check Activity monitor - this shows a Process ID/Name 'mds' at Root level running 99% (any ideas there?)
Run Terminal commmand 'sudo lsof | grep "The-Volume-Name"
- This gives me 4 items (one at Finder and 3 at mds) - Here is what it listed...
Finder 98 kevandholdsworth 19r VDIR 14,11 68 10944 /Volumes/MEDIA/.Trashes/501
mds 186 root 22u VREG 14,11 1069056 4392 /Volumes/MEDIA/.Spotlight-V100/store.db
mds 186 root 23u VREG 14,11 1069056 4393 /Volumes/MEDIA/.Spotlight-V100/.store.db
mds 186 root 24u VREG 14,11 0 4395 /Volumes/MEDIA/.Spotlight-V100/.journalHistoryLog
Is it possible to just locate these files and delete them? or will DW need to do it's own thing?
I'm ready to try Disk Warrior, but would appreciate any feedback regarding the issue before I attempt it.
(sadly, I broke the cardinal rule of not double posting [initially in the 'Finder, Dock & Dashboard Forum], but feel much more confident of getting strong advice here...my apolgies to any I've upset by doing so)
Thanks,
Kevan
PS - just checked my profile and it does not yet list the MBP...It's a 17" w/2GB Ram, same OS and Software as on the G5

It's not backed up yet...I'll do that before running DiskWarrior
I'm not convinced what the issue is. I now am unable to unmount any external HDs (all FW) from my G5.
Jim, Disk Utility is not giving me the option to 'disable journaling'.
Spotlight prefs won't let me add(+) either volume to 'privacy'...that's my understanding on how to remove it from being indexed. However, when I tried 'dragging' one of the volumes into the 'privacy' area, it went 'Poof'...now showing up on desktop, but no longer in finder...is this what you are referring to?
Kenneth, I'm the only user/admin...not seeing an issue there. Maybe I'm missing something from your suggestion. I simply boot up as I always do.
UPDATE...
FYI, here is the original prompt I get when trying to unmount any external hard drives: "The disk "DISK NAME" is in use and could not be ejected. Try quitting applications and try again"
There are no visible applications open...I notice now after dragging a volume to spotlight privacy that one of the text lines from the Terminal sudo command no longer shows up.
I have been able to unmount all drives after starting up from a backup drive (Panther). However, restarting from Tiger does not allow this. I'm also a bit concerned about doing restarts without properly unmounting any of these drives.
Here are a couple of links I've been trying to apply, but it's looking like a backup and DiskWarrior are next steps. A show deadline is preventing me from doing so at this time.
http://www.macworld.co.uk/forums/msgs.cfm?msg=80013&forum=4
http://www.shirt-pocket.com/forums/archive/index.php/t-1572.html
http://discussions.apple.com/thread.jspa?messageID=3651281&#3651281
http://www.thexlab.com/faqs/stopspotlightindex.html
http://docs.info.apple.com/article.html?artnum=301562
Thanks again for all suggestions. I need to crunch out this show and will keep up with this thread until I can resolve the whole issue...will have to award points in a few days.
K

Lacie Hard Drives won't mount

My two Lacie hard drives won't mount on my G5 running Tiger. They were fine on my G4 iMac running Panther. I've tried using the Lacie Update Tool but the drives aren't recognised. I've tested the firewire cables on another drive that works and they're fine, so it's not cables.
Both drives power up okay and whir into action, but just aren't talking to the G5.
Lacie d2 HD 80GB FW DV
Lacie 40GB (no model number, "DESIGN BY F.A.PORSCHE", no model number).
Any ideas much appreciated.

Reply
This happened to me with a LaCie external drive as well.
The problem is that LaCie formats the drives as PC-based
and not Mac Extended, so unless you reformatted the
drives to Mac when you started using them, your access
to them on any Mac may result in a failure to mount.
Once that happens retrieval of data is made more difficult
because of this formatting incongruity.
There is no way you can get the data once your G4 quits
mounting them. If you can get the data off of the drives,
back it up and then reformat the drives using Mac's Disc
Utility. Then you can reload the data and I suspect all of
your Macs will then mount the drives via Firewire.
Good Luck!
My two Lacie hard drives won't mount on my G5 running
Tiger. They were fine on my G4 iMac running Panther.
I've tried using the Lacie Update Tool but the drives
aren't recognized. I've tested the firewire cables on
another drive that works and they're fine, so it's
not cables.
iBook G4 Mac OS X (10.4.4)

HT1751 I am trying to backup my iTunes to an external hard drive, but it won't let me click and drag or copy and paste into the external drive.

I am trying to backup my iTunes to an external drive, but my Mac won't let me drag and drop into the external drive or any of its folders.
Any suggestions?
Thanks,

I think I know what I did....my external hard drive has been used to back up my PC. I was trying to back up my iTunes on my Mac. I forgot that the formats mattered. Thanks.

External hard drive won't unmount for disk utility.

Im not sure if this is the right topic area but I have a white macbook and my external hard drive won't unmount. I want to erase it via disk utility but it keeps telling me other programs are using it.

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.

How to load external DLLs with C++ interface in TestStand?

Hi,
Can you please let me know how would I load external DLLs with C++ interface in TestStand?
Regards.

TestStand 3.x can only call static class C++ methods. TestStand cannot call methods on a C++ object because TestStand does not know how to enstantiate the C++ object. In TestStand 3.x, there is a online help topic called "Exporting Class Methods and Functions in Visual Studio .NET".
Scott Richardson
National Instruments

External HD (Lacie d2 Quadra 500GB) random disconnects

Hi!
I have a problem with my external HD (Lacie d2 Quadra 500GB). The problem occurs since the 10.6 upgrade. My external HD is disconnected every few minutes. Sometimes I only see one partition, but most of the time both partitions (one of them is my Time Machine partition) are being disconnected by OSX. I read that some Western Digital drives get disconnected, too. But as far as I know my drive is a Seagate Barracuda 7200.10 HD.
Any solutions?
I can plug it out of the USB2 port and back in again. It will appear for a few minutes and after that the next "Drive disconnected" message comes up (sometimes the message does not show, too!).
I would appreciate any help!
Thank you,
Markus

I have the same problem with an external SimpleTech portable HD direct-wired via USB. My drive is strictly used to hold music and photo files. The problem has started since upgrade to Snow Leopard.
It disconnects every few minutes and has to be unplugged and plugged back in again to my MBP to get it to reconnect. Sometimes the "Drive disconnected" error message comes up, sometimes it doesn't. When I plug it back in sometimes it doesn't get recognized and I have to repeat the procedure. The time it takes to become recognized, when it is, is much slower than before upgrading to Snow Leopard.

Serious problems after Mavericks installation with External Drive Lacie P9220.

Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
problem.
Many thanks.
Marco

Thanks very much for your reply.
Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
This is not my case, I never used any third party soft ...only OS X disk utility ...
best
marco

External Discs and flash cards won't leave

External Discs and flash cards won't leave, I always get the message "close all applications"even when all applications are closed???So i have always to stop the computer.

I opened Terminal.app (/Applications/Utilities) and looked what was inside but did not something special. After restart everything seems allright now. Muchas gracias.

I recently upgrade to OS X Yosemite. Now, My M_Audio Blackbox audio interface won't work. Any suggestions?

Recently I upgraded my OS to Yosemite 10.10.2 from Mavericks. Now, my M-Audio Black Box Audio interface won't work and I can't find it in the Logic Pro 9 software. Can someone suggest a fix? Thanks.

Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert Yosemite to Mavericks
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.
If you don't have a Time Machine backup, you will need a backup of some kind.

RAID won't unmount...can't repair

Problem: after fixed failed RAID (lost in poweroutage), RAID'd drive won't mount. If I drop to single user mode and fsck the boot volume (no errors listed), after reboot it's the RAID volume is back. I loose it after a restart without fsck (boot volume loads but RAID is "unrecognizeable").
When it mounts everything functions as it should (users get home folders and have read/wrote access, etc.). However if I try to repair it in disk utility (per Apple phone support), i get an error message saying that the disk can't unmount so therefore can't check it.
Any suggestions (besides clean install) that you have to keep the RAID volume intact? I refuse to believe that it's toast as i am able to have it function. I guess I wouldn't be opposed to a wipe if I could get a good backup of it, but I can't even do that since it won't unmount.
Can't wait to hear what you come up with!
Thanks in advance.

Really, how toasted can it be when it all works flawlessly
until reboot? THis really bothers me....
Don't get me started about the Apple Hardware RAID card. I hope you have the write caches turned off for all LUNs because they don't always fully flush on graceful power down (the drives are disconnected from the bus before caches are flushed) - I've had a RADAR bug report turned in for almost 2 years on that, it was very hard to track down and create a reproducible test case. LSI Logic fixed the bug in their microcode after Apple split its version from the LSI Logic code tree to modify for use in the Xserve; don't expect this bug to ever be fixed because the product is EOL, only known workaround is to turn off the write caches.
That said, the disks are big. You think it's working flawlessly, but it may not be. Mystery garbage blocks from space, especially on a RAID, can be hard to track down. For example, on a RAID 1, the read data might not always come from the same disk of the mirror.
If you really think that the mirror is good, I'd suggest cloning it off while booted from another disk (perhaps split the mirror, clone - not image - to one of the split disks, then recreate the mirror from the good copy).
Yea, your DiskWarrior issue is because the disk can't be unmounted.
Russ
Xserve G5 2.0 GHz 2 GB RAM Mac OS X (10.4.8) Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u

My external HD(Lacie triple interface) won't unmount!

Similar Messages

Maybe you are looking for