My external webcam wont work in IE10 but works fine on chrome

The only clue I've got is that on testmycam in IE10 the external webcam FPS rate is -1 (and the screen is blank) and the same site in Chrome the same cam FPS rate is 30 (and it's working ok)

IE uses ActiveX plugin for Flash, Chrome (and all other browsers) use a different plugin for Flash. You should right-click on the Flash object in IE and verify that it has permission to use the camera and any other relevant settings.

Similar Messages

External webcams that work with Leopard?

Anybody know of an external webcam that works with the new Mac OS X (Leopard)?

http://discussions.apple.com/thread.jspa?messageID=5725045&#5725045
The info recommended there for use with 10.4.10 applies equally to Leopard (10.5)
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5) External iSight

HT201250 My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1

My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1
I have tried everything, even buy new external disk from different manufacture.
If I cant get a fix soon, I am downgrading back to SnowL.

Still no luck. I tried all the tricks, reconfiguring TM (remove selected disk option, and re-setting it, and trying different disks). Tried new combo updater, and the newer TM update after that. Tired two different disks too (one is my older firewire WD MyBook 1TB, and my brand new 3tb Seagate GoFlex USB... either one plugged into back of computer - no intermediary devices). I did get the TM buddy wiget and it produced the following log, from the last attempt, where I setup lots of exclusions so that backup quantity was small (under 10gb). Still it failed to complete. Here is that log, for what it is worth:
Starting standard backup
Backing up to: /Volumes/TM-Disk/Backups.backupdb
9.56 GB required (including padding), 911.15 GB available
Waiting for index to be ready (101)
Copied 0 files (0 bytes) from volume Mac HD.
Backup canceled.
To prove a point, I will take these disks are run them on my other Tiger and Snow Leopard laptops to prove TM works fine on those with these disks. But I fear the only options are to either have my tech re-install LION... or just have him reinstall SL instead. Im at wits end.

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

My site working fine on chrome in Mobile but not on firefox

My site http://ccl5<i></i>.com/ working fine on chrome/opera in Mobile but its slider doesn't come up working fine on firefox mobile.
Can anyone take a look ?

Its working fine for me.. Firefox 34.0 for Android... Which version you are using? try to update if using older one.. :-)
cheers..

Java was blocked due to the threat I have followed the update & other options to reenable it ie.manual updates reinstalls yet websites like YouTube still wont load up.Works fine in Chrome & IE!

Java was blocked due to the threat I have followed the update & other options to reenable it ie.manual updates reinstalls yet websites like YouTube still wont load up.Works fine in Chrome & IE!

Your plugins list in "more system details" shows Next Generation Java Plug-in 1.6.0_31 for Mozilla browsers so Java should not be blocked.
Could you post a link to a webpage where Java isn't working for you? YouTube uses Flash, not Java. Here is a list of Java test pages you can try, to confirm that Java is working, from http://kb.mozillazine.org/Java#Testing_Java
* [http://www.java.com/en/download/help/testvm.jsp Test your Java Virtual Machine (JVM)] at java.com.
* [http://browserspy.dk/java.php Java Information - BrowserSpy.dk]
* [http://javatester.org/ Java Tester] - The test pages at javatester.org will tell you if your web browser is enabled for Java and, if so, the Java version.
* [http://www.pinlady.net/PluginDetect/Java/ Java Plugin Detector]
By the way, I see in your plugins list that you also have the VLC media player Web Plugin 2.0.0 so, it's possible that the VLC plugin is causing a conflict if YouTube or other videos don't work. See [[Video or audio does not play]] (you may need to disable the VLC Media Player plugin in the Add-ons -> Plugins list for some media to play).

My Macbook (2009 White) Has had water spilled onto it, it all works apart from the screen. When connected to an external display it works fine, just not on the Macbook itself. Does anyone know how to fix this?

My Macbook (2009 White) Has had water spilled onto it, it all works apart from the screen. When connected to an external display it works fine, just not on the Macbook itself. Does anyone know how to fix this?

Take it to Apple and ask them to fix the physical damage the water caused.
Allan

Most videos do not play in FF; work fine in Chrome. Maybe started when I was having a FB video repeat and clicked on something to make it stop.

Some time back I clicked on a video on FaceBook. It kept repeating. I got tired of it and clicked on something on FB that stopped it. Since then Firefox does not play vids. For example http://senateconservatives.com/site/post/1160/video-new-scf-ad-promoting-ted-cruz?c=9R4F0C9CF7F3BB0 brings up a page but no video. That link works fine in Chrome.

DustinMedlam, I have the same exact problem. I started using my Iphone 4S for shooting video about 2 months ago and tranferred them to my Windows machine with Windows 7. I use the clips in Sony Vegas pro 11 and make short movies. I upgraded to ios 6 last week and every video that I shoot with my iphone 4S now is not usable in Quictime or Sony Vegas???? My old videos from before ios 6 play just fine and I can use them in Sony Vegas with no problems. The only way to play the files is with Windows media player. this does me no good as I just began making short films and now I can not use any of the video I have shot since ios 6. I also have a Samsung Galaxy S2 and I shoot video with it and use the clips in Sony Vegas with no issues!?? I can not believe this is not BLOWING up on the internet like the WIFI issue is..... What do we do? All my video gear is for my Iphone not my galaxy S2. This is very annoying. I also notice that no one from Apple response to these support forums. So why are they available?? What a JOKE!

Yahoo is not displaying correctly and saying it is untrusted. I unistalled firefox and reinstalled. Still having the same problem. yahoo works fine on chrome.

When loading yahoo.com , it says it is not a trusted site. I can load the news page but home page displays incorrectly and cannot log into my mail. Yahoo is working fine on chrome. Happens ever since I downloaded the latest update to firefox and I cannot download a previous version.

Did you check the issuer of the certificate?
Check out why the site is untrusted and click "Technical Details to expand this section.<br>If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.

Adobe quit working in firefox. How do i get it working again? (it works fine with Chrome)

Adobe quit working in firefox. How do i get it working again? (it works fine with Chrome)

After years of enduring problem after problem with Firefox, including the problem with choppy playback of video, I finally found a solution that I really like. It's called, "GOOGLE CHROME."

External isight wont work with imac g4

Hello,
I recently purchased a second hand isight camera using ebay.
I have an older imac g4 and the isight wont work with it at all.
I have scoured the forums on this topic and looked through all of EZ Jim's suggestions but I think my problem is a little bit different.
I'll explain exactly what happens and my troubleshooting so far...
The imac G4 is powered off, I plug in the external isight via firewire 400
The imac boots up into leopard 10.5.8 (using leopard assist)
In system profiler the isight is listed under the firewire tab.
( I can post system profiler info on this if its needed)
When I turn on the camera ichat launches, but then in the video tab it says no camera is connected.
Photobooth just has the no camera sign, but interestingly when ichat is opened photobooth says "camera off"
sometimes photobooth even lets me click the photo button, it counts down but then it doesnt take a picture... obviously!
Skype doesnt work.
I have an imac 24" running snow leopard 10.6.6 .... that also detects the camera but it won't work with any application such as skype or ichat.
I have tried (on my G4) unplugging my usb bluetooth module but nothing changes.
My G4 is connected via ethernet to an external router.
The firewire cable seems ok, I dont have any other firewire devices, but if it was a problem with the BUS or the cable then im guessing it wouldnt show in system profiler.
I am thinking the camera is probably damaged, but before I start a paypal enquiry I would like to see if it is just my computer or a setting i need to change.
(oh I used the application isight updater in core services but the install button is greyed out)
Any help would be amazing!!
Thanks!!!

Well, about all you can do would be to try a different and known good
FireWire cable, as a replacement for what may be a defective FW400
cable that came with the iSight camera. The cable can be defective
with one bad wire, yet sometimes appear available to the computer.
• How to Troubleshoot iSight (note external vs internal)
http://support.apple.com/kb/ht2090
• iMac G5 (iSight), & Intel-based iMac: Using External video camera:
http://support.apple.com/kb/HT2819
If you know of someone with an older Mac without a built-in iSight
camera, to test that one on, this may be an OK idea. Not sure if you
could get any traction by taking the camera to an Apple Specialist
and ask if they could check it out for you; that may also cost you.
{And since your computer does not officially support Leopard 10.5,
the other avenues of support would probably not be open to you.
At least not with the old iMac G4 and an unsupported 10.5 install.}
I have an external iSight camera which was included with my G4 Mini
1.5GHz model, and that appeared to work OK with 10.5.8 at one point.
But I really have no need for it, since I don't use photobooth & so on.
And haven't tried that with my iMac G4 computers at all. No need to.
With a computer not equipped with an iSight camera, the Leopard 10.5
installation should still support the eventual addition of one; even if the
computer itself appears to not officially support a Leopard 10.5 install.
(You refer to Leopard Assist, a means to install in slower CPU Macs.)
The FW cable is about the most easy to consider at this point.
In the course of a year, I've found good replacement cables at
several places, even those at thrift stores in perfect shape, work
and I use them for FW external hard disk drives, primarily. To have
spares is nearly always a good idea. Test & keep known good ones.
I'm not certain how the external iSight FW camera may work on
a newer Intel-based 24" iMac with a built-in iSight camera, too.
Does your 24" computer have FireWire 400+800 ports? Can you
choose an external iSight camera and ignore the built-in one?
These secondary topics have probably been discussed in the other
forum area for Intel-based iMac computer models; if you chose to
try & use that camera with a model computer with one built-in...
• Apple - Support - Discussions: for Intel-based iMac
http://discussions.apple.com/category.jspa?categoryID=189
There is a possibility, if never tried and the iMac G4 computer was
acquired second-hand, that the FW port within it may be band; but
the cable is the first item since it is cheapest, in troubleshooting.
So, anyway, the hour is late here (1AM) so hopefully the matter
can be resolved with a known-good replacement FW400 cable.
You should not have to restart the iMac G4 (800?) model in order
to get a FireWire item to be recognized. It should appear in the
System Profiler's list under FireWire, such as things normally do.
Of course, the camera could be defective as well. Been some
time since they were available on sale, new from Apple...
You could ask around to find out if there is a way to use that
external iSight camera with your newer Intel-based 24" Mac
by someone having it ignore its own built-in camera; in a
way as to not affect its normal operation, that is.
Good luck & happy computing!
+{ edited 2x }+

My webcam wont work

i got my hard drive replaced and my webcam isnt working on the internet only offline.
how do i get it to work on the internet????

i got my hard drive replaced and my webcam isnt working on the internet only offline.
how do i get it to work on the internet????

Toshiba SATELLITE A665-S5170 external display wont work

i have removed the lcd screen as it was cracked. now when i go to boot up the computer it will go to boot into safe mode or normal. i click safe mode and everythign works fine. the display comes up perfect. then when i go back and restart and try to start it in normal mode the screen works up until the windows logo is done loading. then the screen goes to no signal. using a led tv and have it connected with an hdmi cord. i even tried using the vga into a different tv and still didnt work. Also i have tried hitting FN and F5 and it does not work. Im stumped and cant figure this out

It's probably due to no driver for the external monitor/TV your using. Try booting into safe mode again then go to the device manager, display adapter and uninstall any driver found. Then rebbot to normal mode. The unit should use a generic display driver. Then try to find a driver that is compatible with the monitor your using.

MacBook not sending signal to external display - was working fine before.

hi guys, i have a unibody macbook and i've been hooking it up to my tv for almost 2 years now using the mini display port to hdmi adapter and hdmi to my television.
tonight the macbook randomly stopped sending signals to the tv. i tried two tvs with two different display adapters as well as a DVI monitor.
the displays are detected in osx but there is just no signal sending to it. anyone have any ideas? did my mini display port just die? i've tried several cables/adapters.

Hey,
I just experienced a similar problem as the original poster, except that I'm using a minidisplayport - DVI adapter and not HDMI. Been working fine on my external screen for 2 months now and suddenly the external says no signal?
Macbook still flashes a blue screen when plugging in the adapter but does not detect the external. Haven't ruled out that the adapter is busted yet, but worked fine earlier.
I tried resetting the PRAM without any change.
Any kind of software / hardware problems on the macbook?
Any thoughts?

LR 5 issues with catalog on external drive - laptop works fine, iMac does not.

I've just upgraded from LR 2 to LR 5 on my mac laptop and simultaneously gotten an iMac, on which I installed LR 5. I'm trying to work on both, so updated my catalog to a new location on the same external drive as my photos. Everything works fine on my laptop, but I'm having major issues on the iMac: the program finds my photos, but does not display them (just a gray box where they should be). I sometimes get an image if I go into Develop, and then it will show up in the bottom bar among all the gray boxes. When I go into a folder I just created, I get a message about "Access Denied" but am able to work with this folder just fine on my laptop. Please help!

You need to check all permissions for the drive I believe.

My external webcam wont work in IE10 but works fine on chrome

Similar Messages

Maybe you are looking for