My Extigy won't work properly with Wi

I have upgraded my PC to WinXP. I have a Creative Extigy with 5. speakers, and on my old PC it all?worked perfectly. With the new computer?the 5. rear?right and left speakers won't work. The others work just fine !?There seems to be no signal coming from the Extigy when I play from Musicmatch Juke box. But if I play something throught MixMeister3 it works just fine. Any ideas what the problem is ? ... thanks ... Roger

hey..actually i have same problem 2 days ago n yesterday my imessage finaly worked..
in my case i use another sim card/not original bundling,then i use my original sim card/carrier, n it instanly worked..
so actually carrier does take the problem..
im sory my english is terrible bad,im from indonesia..thank you

Similar Messages

  • Why AdobePPro CS4 won't work properly with Win7 Ultimate OS

    Can u please explain why Adobe PremierePro CS4 won'r work properly with Windows 7 Ultimate?? Is it because of a "bit" differences?? or for any other reason?? I have freezing problems on time line.. I am using Sony XD EX1 clips on the time line. Sometimes it works up to Dynamic LInk Encore and when it starts encoding, after few seconds it gives an error message "Encode failed" My computer config: WIN7 Ultimate/ Xeon 2.4 GHz, 12 GB RAM, Nvidia FX3800 Video card with 1GB RAM, C:\ 1TB SASHDD on RAID 5 system, D:\600 GB SAS HDD (not on RAID) Any thoughts to get it going? Thanks

    Read A fix via Virtual XP
    http://forums.adobe.com/thread/702693?tstart=0

  • Wireless Mighty Mouse won't work properly with MacBook/tech support stumped

    Hi. First post. Anyone heard of this problem? Appears to be location-sensitive. Problem described below, but first, short background...
    Just bought entire Mac system after decades in corporate world with PC. Believed the TV ads that it would be simple. Already have been back to Mac store 6 times and have spent roughly 7 hours on phone with help line. Mac store even replaced Macbook entirely in case it was faulty logic board/Bluetooth circuit -- didn't help. Also, problem doesn't happen in store. So, to get to the point:
    Wireless Mighty Mouse doesn't work properly when hooked up to Macbook -- herky-jerky, slow, unresponsive, sluggish, imprecise, intermittently better/worse. Went through a few Mighty Mouses and finally gave up; now using hardwire mouse and there's no problem. But before I return Mighty Mouse for refund, would like to see if there's a solution b/c I'd prefer wireless.
    System is the latest little souped-up Macbook, 23" HD Cinema external monitor, external wireless Apple keyboard (which works fine), wireless Mighty Mouse (the culprit), Airport Express, HP printer. All brand new from local Mac store (Fifth Avenue, New York)... where the Genius counter folks have given up. I'm not convinced they believe me because (a) the problem doesn't occur there, and (b) after a couple of new Mighty Mouses, they finally just gave me a new Macbook to make me go away... but after going through the whole system setup once again, same problem. Have tried many different mousepads, BTW.
    Tried all the stuff phone tech support suggested -- removing/installing/reinstalling software, etc. Airport works fine; using modem and printer connections there. Bluetooth works fine with keyboard. I've scouted around for intefering devices; even unplugged electrostatic loudspeakers and old tubed amps in living room (concrete wall separates rooms), unplugged hifi in same room, etc. On 40th floor of Manhattan hi-rise; concrete walls between neighbors. Have never had interference before with anything; previous PC system worked fine with Microsoft wireless (optical) mouse.
    This is no longer urgent because hardwired Apple mouse works well. It's just mysterious.
    Any thoughts?
    Other than that, I like the Mac environment so far. Fifth Avenue store is cool, also, because it's open 24/7.
    Ken
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
    Macbook   Mac OS X (10.4.9)   2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM

    Hey, thanks! That was fast. I'm impressed by the Mac community.
    This program helped my hardwired mouse, actually, and did give me wider parameters on the wireless mouse, but it didn't correct the herky-jerky/sluggishness -- actually amplified those problems.
    Ken

  • Photobucket won't work properly with Safari 6.1.6 update.

    What the heck is going on now?  Updated Safari as part of regular, monthly process.  Now the editor and other features of Photobucket won't work.

    Gustavo,
    Since you used Software Update for 10.6.3, try downloading and installing the Mac OS X v10.6.3 Update (Combo).
    ;~)

  • 160GB iPod Classic Won't Work Properly with speaker systems

    My 120GB works fine with my iHome, and a new speaker system I just purchased... because I thought my iHome was broken, because when I used my 160GB in it, it didn't respond to "play/pause" commands with either the remote or the speaker command. When I tried the 160GB on the new system I bought, it didn't respond either. Should the 160GB work fine with those systems if they play the 120GB without a problem? I'm a bit confused on the issue.

    More info would be helpful
    What do you see on the iPod screen when you connect to the PC?
    Which version of iTunes are you using?
    What is the iPod software version as shown in iTunes summary page, the last time you connect successfully.? Or just, on the iPod, press Settings->About
         press the select button 3 times and you will get the software version.
    HAVE A NICE DAY!

  • Photosmart premium C309m - won't work properly with wireless

    Hey there,
    As the subject suggests, i am having major problems with this printer (c309m). The problem is that every time i need to print something out, from one of my two computers the printer stalls or doesnt work - or what ever the problem might be. I have tried all the solutions provided in the troubleshooting section and none have worked. I got it to print from 1 computer, but then the next time i turn it on, i just doesnt work anymore.
    Im running win7 64 on one machine, and win7 32 on the other. The printer is connected through the wireless router (D-link 655).
    I have tried using HP's diagnostics programs and they either cant connect or they come up with the print que stuck error. Each time i fix it, it works for 1 sec and then stalls when i print something again.
    In short  - the printer can work for like 5 minutes with 1 computer, but the next time it's used it cant get the connection or the print jobs get stuck in print cue.
    I could really use some help here, since this is my last option of getting this printer to work

    Some additional info,
    Both computers are running norton 350 v. 5.0
    Im using reserved Dhcp adresses for my printer and all other devices on my network.
    These devces are connected
    Zeke-PC
    80:1f:02:08:c8:8d
    192.168.0.193
    Kathrine-PC
    00:1a:73:e5:33:02
    192.168.0.196
    SonosZP
    00:0e:58:29:f1:8a
    192.168.0.197
    SonosZB
    00:0e:58:44:b9:12
    192.168.0.199
    HP6EFADB
    78:e7:d1:6e:fa:dc
    192.168.0.187
    Zeke-iPod
    58:55:ca:99:e6:de
    192.168.0.188
    My D-link 655 is running WPA/WPA2 - Personal

  • Old Netscape console 4.2 not working properly with new Directory Server 5.2

    After successfully installing Messaging Server 5.2 and applying patch 2, the old Netscape Console doesn't work properly, I tried running the script which is given in the link
    http://docs.sun.com/source/816-6734-10/index.html
    which hobbles the server by creating a set of dummy jar files in order for the directory server console not making any changes on the messaging server. At first I got these messages:
    Failed to install a local copy of msgadmin52.jar or one of its supporting files: not a ZIP file (END header not found)
    I got the same message for these 2 files:
    admserv42.jar
    msgadmin52.jar
    After that I made real dummy jar files using a zero-length file I created with touch and I got these messages:
    class com.netscape.management.admser.AdminServer not found
    After that I erased all the files created by the script and I get these messages:
    failed to install a copy of admserv51.jar or one of its supporting files: null
    failed to install a copy of msgadmin.jar or one of its supporting files: msgadmin52.jar not found at http://192.168.10.205:5001/
    and for admserv42.jar I get the same message
    Does anyone have a clue on what to do next??
    thanks in advance
    Eduardo

    The thing is that the netscape console 4.5 won't work properly with messaging server 5.2, and the directory server console is not working properly for the directory server. I already know the limitations about these consoles since it is explained in the doc where the procedure of migrating from a 4.x directory server to 5.1. I

  • Itunes on my 4s not working properly with docking stations

    Just in the last week itunes on my 4s won't work properly with my docking stations. I have one at home that is my alarm clock and while my phone will charge when my alarm goes off it will not play music, it just beeps which is what it does when the alarm goes off and the phone is not on it. If I press play on my the Itunes app itself it will play music. I have a station at work that I use daily as well, and same thing there, if I press the play button the station it won't work, but if press the play button on the app it will play. I believe it is an Itunes app issue because it will work as it is supposed to with the pandora appg. Anyone else having this type of issue? Any suggestions or tips are welcome.

    Get a magnifying glass and closely inspect your dock connector and clean any dirt, debris, dust bunnies, corrosion or anything else you find.

  • Has anyone gotten DLNA to work properly with Windows 7 x64 ?

    Has anyone gotten DLNA to work properly on Windows 7 64 bit and Windows Media Player 12? I got it working, sort of. It's not reliable though, and very slow. It drops the connection a lot, and when I go to engage it it connects about half of the time and half of the time it won't see the Media Server. It also times out when trying to scan my (admittedly large) music directory on my PC.
    I'm sure that my hardware is ok, I think that DLNA is just a buggy system. But if anyone has it working properly with Windows 7 x64 and WMP 12 can you tell me exactly how you set it up?  And if you used another desktop app besides WMP can you tell me what worked for you?
    Thanks!

    Try setting it up like this.  Hope this helps!
    Start Device Manager.
    Windows 7 Click Start > Control Panel > System and Security > Device Manager.
    The following devices are normally installed:
    Anrdoid USB Devices
    My HTC
    Disk drives
    HTC Android Phone USB Device
    Modems
    HTC Modem (if using as a tethered modem)
    Portable Devices
    E:/ (Where E represents the assigned drive letter.)
    Universal Serial Bus controllers
    USB Composite Device
    USB Mass Storage Device
    If a red X, yellow ! or yellow ? is displayed to the left of a listed device, a conflict is present and the drivers must be updated or reinstalled.
    Driver conflicts may also be indicated by a device entry labeled Other Devices or Unknown.
    If a conflict is present:
    If using the HTC DROID Incredible ADR6300 as a Sync device continue to step 3.
    If using the HTC DROID Incredible ADR6300 as a Modem ensure the device drivers are installed. Refer to Downloading and installing VZAccess Manager for additional assistance.
    If VZAccess Manager is installed and a driver conflict is still present, continue to step 3.
    Right-click the device then click Update Driver Software.
    If using Windows 2000 / XP, right-click the device then click Update Driver.
    The device name may differ from the example shown.
    Click Browse my computer for driver software.
    If using Windows 2000 / XP, select Install from a list or specific location (Advanced) then click Next.
    Enter C:\Windows\System64\driver into the search window then click Next.
    The driver location can be entered manually or navigated to by clicking Browse.
    If the driver software is not found, a Windows Operating System update may be needed.
    Click Close.

  • Iphoto9 won't work properly in Snow Leopard

    On my Macbook (2008) iphoto9 won't work properly in Snow Leopard. What do I do? Upgrade to iphoto 11 or is there another way?
    I was happy with iphoto9.

    Had a look around the message boards and found this link, has solved the problem.
    http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

  • IPOD won't work properly if drive C: is available on your computer

    The Windows XP driver for the Apple IPOD USB Device has a bug that makes your system very slow or even hang when you try to connect or eject your IPOD if Drive "C:" is available on your machine. Another symptom is that when you connect your ipod, the computer doesn't automatically launch the ITunes app and it is very slow to open manually.
    A typical problem is that if your system has had a hard drive replaced and/or the drive "C" is not assigned for some reason, then the IPOD USB Driver will attach itself as drive "C:" and then it won't work properly seemingly because of conflicts with the Windows OS. Other USB devices never grab drive "C:" but this Apple-supplied device driver appears to think it is OK to use drive C: but then it doesn't work properly.
    The fix is to make sure some real (physical) drive is always connected to or mapped to drive "C:" so that the IPOD USB driver attaches to a drive from "D:" and up.
    Also try reading: http://docs.info.apple.com/article.html?artnum=93499 for more info.

    yeah, the ipod normally gets assigned the f, g, or h drive letters. i don't really know though if windows is responsible for assigning the drive letters to usb devices or the ipod driver. to my understanding the ipodservice.exe only makes sure that itunes can comunicate to the ipod through the drive letter that windows assigns to the ipod. windows is the os and therefore responsible for managinig its drive letters.

  • Since updating to ios 6 my ebooks won't work properly on my iPad. Skips from first page of a chapter directly to first page of next chapter. I'm very unimpressed

    Since updating to ios 6 yesterday, my ebooks won't work properly. They jump from first page of one chapter onto first page of next chapter. Obviously missing all the pages in between. Anyone else having this problem? Help please....

    I have a similar problem with Microsoft Visual C# 2010 Step by Step.  This ebook worked fine until I upgraded to ios 6.

  • Keypad won't work properly on 'A'

    I need help about my keyboard. i'm using a curve 8520 on 0S5.
    My letter 'A' in the keyboard suddenly won't work properly.. Just a soft touch and it would appear automatically... in Uppercase. Because of this, i am having a hard time when typing. i copy paste the lower case 'a' so typing would be easy.
    Also, since the 'lock' is also in that key, my phone would always lock automatically and with that... my phone seems to go 'off' and i would have to longpress any key so it would come alive again.
    i tried the application clean-up thing in the desktop manager as @BlackberryHelp tweeted me when i asked them about this but still there are no changes.. i also tried putting a tissue in the back of the metal plate thing. i am so worried coz i just got this phone 3 months ago. Please help me about this! Thank you so much.

    i managed to unlock my phone by keeping power on, remove battery and presto its unlocked. problem is stil letter "a" in keypad is not working can anyone suggest how to fix it instead of going to a technician?

  • Google News doesn't work properly with Safari 5.1.4

    Has anyone else noticed that Google News doesn't work properly with Safari 5.1.4?

    Thank you for your response.  The more I use 5.1.4 the more problems I am seeing.  There are problems with images and layout.  I would like to back up to 5.1.3 but the system won't let me. At present I a looking for a solution, or I might just start using Firefox.

  • Remote not working properly with Apple TV...sporadic fuctioning

    Hello,
    I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
    I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
    Please let me know if any of you have ever experienced this problem and what your solution was, if any!
    I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
    Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
    HELP PLEASE!
    Thank you,
    Travis

    The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
    Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

Maybe you are looking for