My facebook messenger is not working properly under proxy based network. Iphone 5s ios version8.0.2

it only shows connecting and it loads a message too dammmm slow and sends a message in ages

Hello there, Taimoorkhan.
The following Knowledge Base article offers up some great recommendations for when an app that's installed on your iOS device isnt functioning as expected:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communiites.
Cheers,
Pedro.

Similar Messages

  • Camera not working properly after ios7 upgrade in iphone 4s

    Iphone 4S
    Camera not working properly after iOS7 upgrade.
    It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
    help me to solve this problem

    Have you tried a battery pull?  If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • After last update facebook messenger is not working correctly

    It's happening to 3 different people I know.  Once they updated their phone, their Facebook Messenger Service is not working Correctly.  They have already deleted and reinstalled the app.
    Any suggestions?  Is this last update known to cause this?

    razmee209 is correct.
    If deleting the app doesnt help you could try a back up and restore as new to determine a software or hardware issue. But if the app doesnt work on the iOS it is not the iPhones fault it is the apps. Apps are meant to be compatible and run on iOS not the other way around. If the app fails to run on the iOS it is something that would need to be taken up with the app developers.

  • [Solved]dual screen (radeon 9200) not working properly under composite

    I am running a radeon 9200 on my desktop with monitors plugged into both the DVI and VGA outputs. I'm using the xf86-radeon-ati driver with no Xorg.conf.
    I have been using openbox for a few years now, and for as long as I remember, all I needed was:
    xrandr --output DVI-0 --auto --left-of VGA-0
    and everything works fine. Seems like xcompmgr and cairo-compmgr also work properly.
    I was experimenting with XFCE4, which works fine until I try to also use compiz as the window manager. The right side on the left monitor become jibberish, and the second monitor also becomes just as messed up, and I cannot properly drag any windows.
    The same thing happened when I installed KDE4.
    I should note two things:
    1) If I clone the two monitors, everything works fine.
    2) If I change from OpenGL to XRender (under desktop effects in KDE settings), everything works fine, just quite slowly.
    Am I right in guessing that compiz works based off of OpenGL? Is there some way to get OpenGL working properly with my setup, or is this not an option?
    Last edited by twistedcubic (2012-06-01 15:27:06)

    Gusar wrote:Depends on the resolution. It's quite possible the card's limit when it comes to opengl is 2048x2048. If the combined resolution of your displays is larger than that, you simply can't use an opengl compositor.
    Does this have anything to do with texture size? If I try to enable composite from terminal, I see some error messages regarding texture size, and after some googling it appears as if it is possible that the max texture size is 2048.

  • The facebook messenger app isnt working properly

    Hey,
    I am using the iPod touch 4th gen
    I downloaded the Facebook messenger app for ios 6
    but the app has apparently been updated for ios 7
    thus i am not getting all features of the new app,further the app doesnt let my friends see that i am on messenger.
    Can i get the same updated messenger app fpr my ios 6 device??
    What can be done?
    thank you

    Purchase a 5G iPod is you want the features added by the updated app.

  • Should I update apps to ios 8 version on my iphone 4? For example: Facebook messenger does not open properly.

    SShould I shut off all app updates from settings?

    An iPhone 4 cannot be updated to iOS 8.
    Apps that require iOS 8 won't run on an iPhone 4.
    You should be able to use the Facebook Messenger app on iOS 7 >  Facebook Messenger on the App Store on iTunes
    If the app won't open properly, reset the iPhone.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Then try that app again.

  • OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

    Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday.  There are many positive features of the 8600 Plus that prompted me to purchase it...
    Modular Design
    Large legal sized Scanner
    Standard/Legal Paper Printer
    Copy
    E Print Capability
    High Yield / Affordable Toner Replacements
    Unfortunately, I discovered the Wireless network capability is less than desirable.  After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work.  If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
    HOWEVER, I did discover this solution.  If the unit is near your base computer, install it to your computer with a usb connection.  That allows you to have scanning and printing from that unit.  Then you can connect the unit through its ethernet connection to your router.  From there all computers can print within your network.  It's not the best way to connect a WIRELESS printer, but at least it works.
    I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked.  The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure.  I wasted an entire day of productivity attempting to make it work.  I'm posting this so you don't make the same mistake.  If you happen to know a verified solution, then I would welcome the information.  Best of luck!!!

    It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
    http://www.apple.com/support/bootcamp/
    I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

  • Ctrl-key not working properly under Linux

    Hello,
    I am using Labview 8.6 under Ubuntu Linux 8.10 (Gnome) with a German keyboard layout.  If I want to enter a backslash "\" and hit the control-key I first get one ore more space-characters. This is very annoying and produces sometimes hard to find typing errors. I don't have such problems with any other applications so the keyboard settings of Gnome/X-server seem to be fine.
    Any help would be appreciated.

    Okay.  It was just a thought of where there might be a problem with LabVIEW and doing a Ctrl-S for save being a problem, but not for other apps.
    I don't have any other ideas right now.  I don't do Linux and it seems like that is where your problem lies.  I don't have the time or desire anymore for the sake of trying to make non-conventional operating system with a myriad of flavors and versions functional, so I stay away from it.
    Good luck.  Hopefully those people who love to dive into the nitty gritty details of an operating system like Linux have some ideas.

  • Xcelcius is not working properly under both Windows 8 (64 bit) and Windows 7 (32 bit)

    Hi all,
    I use Xcelcius ver 4.0 under Windows 8 (64 bit), but it cannot load canvas and data query. I tried to use Windows 7 (32 bit) but got the same result. What should I do to solve it?
    Here is the design captured:
    When I run, it's the result (nothing happened):
    Need help. Thanks.
    Best,
    Pri

    Hi,
    go to file ->Document prperties and check "show loading staus"
    prewiew the dashbaors and check in which stage the dashbaord is stucked, perheps you have configured an external connection and you need to configure the corssdomain file
    please try also to export the dashbaors to swf format and try to open it using a browser, if you reporduce the problem so please follow the sap kba 1767433
    Best regards,
    Mohamed AISSA.

  • Why are videos taken with a 4S suddenly not working properly when sent to non iphone users since the update?

    Suddenly non I-Phone users cannot view videos anymore, they can hear the sound, but no audio.  Iphone users are having issues viewing the videos too.  This all started with the 6.0 update.  Please fix it or tell me how to restore my phone back to the previous update, it is quite annoying.

    Hello VintageShaay,
    It sounds like you are getting some audio issues with the included Ear Buds when they are plugged in. I wanted to recommend these troublehsooting steps from the article named:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/ts2634
    3. Disconnect and Restart
    Disconnect the accessory and turn it off, if possible. Restart iPhone, iPod touch, or iPad by turning it off and then back on. When the Home screen reappears, reconnect the accessory.
    4. Isolate
    Isolate the issue to the accessory, if possible. Or, if available, try to reproduce the issue with another identical or similar accessory.
    Examples:
    If there is static coming from the left audio channel when using headphones, try connecting the headphones to a stereo, or try connecting a different set of headphones to the device.
    If the device is not syncing when connected to the dock, try connecting it directly to the computer using the Dock Connector to USB Cable, or try another USB port.
    6. Restore iPhone, iPad, or iPod touch
    Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    Also if that does not resolve the issue, try the steps from the following article:
    Apple EarPods: Low or muffled sound
    http://support.apple.com/kb/TS4395
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • IMessage is not working properly on my AU/KDDI iPhone 4S in Japan.

    I've got an iPhone 4 (AT&T) with iOS5, and just bought my iPhone 4S (AU/KDDI) in Japan.  I set up both phones with my iTunes Account information, but only the iPhone4 (AT&T) will give me the blue send button in Messages app when I'm messaging an iOS5 user.  Also, the Messages settings panel only has SMS option for character count.  It doesn't have all of the Messages settings as is on my AT&T iPhone.  Anyone having a similar experience?

    I actually found the answer on AU's website.  It's in Japanese, but if you translate it, it says that iMessage is coming in 2012.
    Here's the link:  http://www.au.kddi.com/iphone/faq/

  • My imessaging is not working properly and is telling other iphones that it is coming from my email. What do I do to fix that?

    My imessaging on my iPhone 5 is sending from my email to other iPhones as opposed to saying that texts are coming from my phone. What is the issue and how do I fix it?

    Check:
    Settings > Messages > Send & Receive > Stsrt new conversations from

  • TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

    When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

    No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
    <Edited By Host>

  • After upgrading ios6 yahoo messenger not working properly and specially in video call colors appearance is very poor

    After upgrading ios6 on my iPad2 am not able to login at any yahoo account and gmail account and even yahoo messenger not working properly whenever I want to do vc it's takes too long to connect and even in video call the color appearance in cam is so poor and pic is blurry, please tell me what to do?

    Please reply me to solve my problem

  • My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

    My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

    As Peter says above, only an Apple Store genius can advise you.
    But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement.  That is not necessarily true.  Let them look at it and advise you what the remedy is.  They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement.

Maybe you are looking for

  • Using an audio interface with multiple inputs

    Hi, I'm currently facing an issue where I need to be able to use the audio from a microphone and a keyboard through Skype calling. I have them both plugged in to a Focusrite Saffire Pro 24 audio interface. The problem is that only the microphone plug

  • Printer dispenses a blank page after every printing!

    Suddenly my printer is dispensing a blank sheet of paper after almost every printing. Oddly, the only thing unusual I've done, relating to the hp printer,  is downloading the HP Printer Assistant and the HP Printer and Scan Doctor! I've checked all r

  • Importing AIA Xpath Functions in to Jdeveloper

    Hi, I have a requirement of using aia Xpath functions, i downloaded the AIAXpath zip folder form metalink and edited the setup.ev to Jdev home even after running the bat file restarted the system but could not see the aia Xpath functions in my Jdev d

  • I want to install CS 5.5 on my new computer. I do not want to by CS6

    I bought CS 5.5 in 2011. They say that you can put the products on 2 computers. I just got a new MacBook and I want to install my programs on it. I have my serial number. When I sign onto the Adobe website it does not list my order history. I do not

  • Needing Help with color setting for Photoshop 4 + imac

    Hi, Is anyone able to assist me please.  To cut a long story short.  i have had to reinstall my original software onto my Imac as when i put on Snow leopard it was just slowing down Photoshop 4 and would keep crashing.  So my problem is .... I had so