My FaceTime won't send the verify address email. Can anyone help
I need help. When I first set my account it worked. I had to change apple I'd password and now I can't face time I log in it goes to validating email address. Takes awhile. Then it says it can't. It says it's sending a email to validate but the email never shows up. Can anyone help
I had a similar problem with an old apple ID (using a gmail addy) - I could log into itunes etc.. all fine on my macbook but facetime had a similar issue to THuffDaddy's with verifying email address. It looked like it had verified, but then hung... and eventually came back with could not verify. It had worked previously but just started having issues for some reason.
I used rayminsters idea around logging in with my old apple id (and password) into the support section and found I could change the apple ID (which was my email) (with all other info unchanged).
Put in a secondary email address and when thru the verification process, then changed the primary address/apple ID and logged into facetime (with the same pwd but diff email id) with it and it worked.
So I logged back out of facetime and changed my email address back to what it (so people could get hold of me) was and logged back into facetime with no issues.
While it worked for me it might not work for everyone.. and might be a little late for the above ppl.. but might help someone...
Good luck
Similar Messages
-
I follow the steps to the manage my account page, then I get to my security questions and it doesn't give the option to send an e-mail to my rescue address. Can anyone help?
You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103693) -
I can't send emails from iPhone until I connect to my wifi at home. I am with bigpond and have a bigpond email address. Can anyone help me?
Try closing the Mail app completely and see if it works properly when you re-open it : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?
Did you follow the instructions on the page linked below?
OS X Yosemite: Recover your entire system -
I tried synI tried syncing my iPad to my computer but it says it's synced with another computer. This is not true and I verified in iTunes preferences that my ipad's name appears in the devises list. Can anyone help?cing
See if this is what you are experiencing ad try the solution in this article if you are.
http://itsmichaelw.com/tutorials/this-computer-has-been-previously-synced-with-a n-iphone-or-another-ios-device/ -
My iTouch will not restore becuase for some reason it won't reconize it. I merely tried to update it with the newest software and every thing went to sh--. Now it is just stuck on the screen showing the apple sign. Can anyone help me.
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
My iMac suddenly has a USB problem. I can connect to drives and printers. I am able to pul info off from drives. When I try to send info to a drive or printer, the connection is lost. All USB ports appear to have the same problem. Can anyone help?
Please do 2-3 SMC and PRAM resets back to back and retest. Also use new cables, they can go bad.
Intel iMac SMC and PRAM resets -
I was given a replacement and told to set it up on itunes but now I cannot retrieve my address book, can anyone help please?
a message appears saying that there is a problem with the windows installer.
What's the precise text of the message please? (There's a few different ones I can think of that you might be getting.) -
I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks
my laptop is Windows 7 and ip is this
192.168.102.12
255.255.255.0
192.168.102.1
DNS
192.168.254.2
192.168.254.3
in ipod touch 4g is DHCP and its showing
ip address 169.254.192.139
subnet mask 255.255.0.0.
remaining all blank -
I have updated my phone to iOS 8.2 and i m new to using iPhone. Whenever i am trying to open my iTunes store, its only showing me the option to open the iTunesU store. Can anyone help me with that?
Unfortunately Pakistan is one of those countries where media isn't available from iTunes - when that might change we won't know (we are fellow users on here) until if/when Apple announce something.
Are there other music purchase download sites available there ? Or you can copy your CDs via your computer's iTunes and sync them to your phone -
When I open my email in the text box it doesn't show anything until i hit the forward button. Can anyone help?
See if any of the following help.
Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
The lock rotation has turned on I have no idea how there is no icon on the bottom task bar can anyone help please
You have the lock icon towards the top right of the screen next to the battery indicator ? If you do then which iPad do you have ? If it's not the iPad Air 2 then you should have a Settings > General > Use Side Switch To option which controls what the switch on the side of the iPad, above the volume control does - if that is set to 'Lock Rotation' then you use that switch on the side to turn rotation on/off
If there isn't a lock icon at the top right then try a soft-reset and see if that gets the iPad to rotate again : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?
Thank you for your reply. I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years. The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import. Now all of a sudden my iMac does not recognise the camera. However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing. So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years. I can only assume that the settings on the iMac may have changed, but I cannot verify this.
-
Hi Just wondered if anyone can help with the above question? I had O2 phone unlocked and bought a local sim card, but although the calls are fine i have no option for internet etc. I have done searches and got the info details from the sim provider to activate, but instructions say i go to : Settings; General; Network and then Celluar Data Network, but I dont get that option ? When i put back my O2 sim card, the option reappears?
Can anyone help me please? Off to Australia again soon and really could do with it working properly this time.
Thanks everyone
RonnieHi Ronnie, was wondering what brand sim card you bought?
Was it from Telstra, Optus, Vodafone, Virgin or Mayasim?
I have a 4 S running iOS 5.01 is there an option in Settings - Network - Carrier? As this should be set to the supplier of the sim card. In my Settings - Network there is no option for Celluar Data Network.
What version of the iOS are you using?
Some prepaid sim cards may not have a lot of data, so I suggest searching the companies websites for the best deals before you come here. Telstra usually have good plans. If you take your phone to the shop you purchased the sim card from they will usually set it up for you.
Telstra runs on a different frequency to others and offers the best coverage in Australia.
Just for the record I am not an employee of any mobile company. -
I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?
I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
~Lyssa
Maybe you are looking for
-
Computer randomly shuts down and...
Hello everyone! I have had my desktop for about 7 months now, and haven't had any problems. Recently, my computer had begun to make a (sort of) loud humming noise. The humming noise would get louder at times, then soften back to a slight hum. It has
-
Complicated n:1 mapping without BPM
Hi all, I have a very hard requirement from my boss. There will be two source csv files. Header and Details. The target is an IDOC. There can be multiple lines in the Header, and in the Details as well. I need to join these two files and then group t
-
Idoc status 53.Yet application data is not posted.
IDOC status is 53. But application data is not partially posted.iam generating 2 idocs, one for type INFREC01 and other for COND_A01. iam Generating IDOC using a fm IDOC_INBOUND_ASYNCHRONOUS. purchase info record is posted succesfully. but condition
-
Installing the northbrigde fan
Heyo! I'm finally installed (or tried to) my northbridge fan, but it's not working. It does work, as I attached to my other computer. However, on my board (KT6 Delta LSR) do I have to set it up in the bios? However, I haven't found anywhere to do
-
Grey screen when trying to open PDF, get error 103:103, tried all solutions on forum but no joy. When try and open Adobe Reader x on desktop only get error message asking me to report this to microsoft. Tried, uninstalling etc, updating, tried in bot