My fan has stopped working on my HP Pavilion dv6 notebook pc

Dear friends,My lappy cooling fan has stopped working what should i do.Kindly help me. Thanx

My Fan Died So Maybe It is time to buy a new fan By the way If you go to best buy (picture shown below) you can get a fan for like 30 bucks 

Similar Messages

  • 6870 hd oc twin frozr one of my fans has stopped

    hey guys one of my fans has stopped working on my twin frozr cooler
    I bout this pc last year with the card included and its been awesome up to now
    on the serial the date says 1102 as part of the code so is that still under warranty?
    what are my solutions here guys
    thanks
    mike

    hey thanks for the reply the serial is
    602-V245-01SB1102115949
    thanks
    mike

  • Satellite A60-652: ati2dvag driver has stopped working

    Hello,
    Recently I have some problems with my graphics. My satellite freezes up, and goes to a low resolution with a few colours. A message says the ati2dvag driver has stopped working. After rebooting the satellite shows a blue screen and reboots...same thing happens. Only shutting down and retrying after a few minutes gets me back to normal Windows.
    I tried to look for some new drivers, but I can't indicate my model (SA60-652)... is this model too old for updates???
    Toshiba SA60-652
    ATI MOBILITY RADION 7000 IGP
    ati2dvag driver (6.14.10.6430)
    Windows XP (SP2)
    AVG virus scan
    Hitman Pro anti-spyware
    ATI hydravision installed but never used :-/
    Notebook recently has been rising in temperature...I will deal with this after my final thesis (8 may)
    Please can you help me?
    If you can, please be clear in instructions, 'caus I don't know a lot about computers... (PEBCAC)
    Thanks!

    Thank you for this answer,
    I found the driver myself, uninstalled the old one and installed the new one (same driver, so actually just a reinstallation).
    I use the programm Speedfan to monitor my cpu-temp, and I noticed a few months ago that temperature stayed between 60 and 70 degrees. Now my laptop is easily rising to temperatures of about 87 degrees. Think this is the answer... The notebook even completely stopped working suddenly a few weeks ago, due to high temp. I will look into it to clean the fans and stuff. Guess I'll find some more info on that on other forumthreads.
    Thank you for your help
    Jeroen

  • ClickBiosII will not run - SCEWIN_64 has stopped working

    I've been up and running for about two weeks on a new motherboard that I recently installed (info below).  Everything was working fine and I had the ClickBiosII running and was working fine.  I just installed the MSI LiveUpdate 5 and it reported that there was a new Bios download available which has a fix for a Windows 8 issue (which I'm running on Windows 8) so I decided to do the update.  Once the update completed (which appeared to complete successfully and rebooted the computer) then my ClickBiosII will no longer start.  All it does is display a message at start up reporting:
    SCEWIN_64 has stopped working
    A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.
    I've uninstalled it (totally cleared out it's installation directory), reinstalled it back with the original one from my setup disk, still failed.
    Uninstalled it again and used LiveUpdate5 to download and install the latest one and it still fails.
    When I do try to run it and it fails, the Task Manager for Apps, shows:  ClickBIOS_Loading (32 bit)
    And there is a Background Process of:  MSI CLICK BIOS II (32 bit)
    I have to kill both of these before I can even attempt to try to run it again.
    WHY isn't it working any more just with a Bios update???
    System Info,
    Board: MSI H77MA-G43
    Bios: Version 1.90  (previously it was 1.8 before I updated it to 1.90)
    VGA:   NVIDIA GeForce 8600 GT
    PSU:   (I have no idea what this is??)
    Intel Core i5-3570, 3.4 GHZ, 6MB Cache, LGA1155, 77W
    MEM: G.Skill DDR3-1600 PC3-12800 4x4gb F3-12800CL8D-8GBXM
    HDD: SanDisk 256gb SSD
    COOLER: CPU stock fan/heatsink
    OC: N/A
    OS: Windows 8 64bit Professional with Media Center

    The MSI register site really sucks!!  I usually don't get very frustrated at company sites much but the MSI site stinks.  I've gone in and created an account, but there is no way to register my product.  Every link I click on there displays a Message with only one button on it "Back to Member Center" which the screen automatically goes back to the previous window on it's own.
    I've tried the Technical Support link and I get a "This page can't be displayed" message.
    So I can't get to any support from MSI itself.  I wish I had known this before I purchased this mother board!

  • "iTunes has stopped working" when attempting to launch

    First off, I've tried everything the Apple troubleshooting section has suggested (uninstalling iTunes+Quicktime, clearing temp file, etc), and I've yet to have any success.
    This is extremely frustrating, and annoying. I've purchased at least ~$150 of iTunes store material, and I am unable to add/remove media to my multiple iTunes.
    Basically, whenever I double-click the iTunes icon, I'll get the busy-cursor, and then Windows announces "iTunes has stopped working" and has no suggestions other then downloading the latest version of iTunes (which hasn't worked).
    I've been a big fan of Apple products for years, and this is the first time I've had trouble with either the software, or the hardware.
    Any help will be greatly appreciated.
    Message was edited by: Bigtex5150

    First my iPod, when plugged into the USB port, my computer kept saying that nothing was there, when i tried to upgrade my iTunes to 7.5 version, it wouldnt let me, my computer kept reading Invalid Drive: F:/, i had to use someone elses computer to make a copy of the 7.5 version on to a disk, then i was able to uploaded and run it to my computer. The second part of this trick, was having to get iTunes and my own computer to recognize that my iPod was in the USB connection, finally once i upgraded to 7.5, as soon as i plugged in my iPod into the computer, iTunes recognized it, i quickly went straight to Restore Ipod, turns out that my iPod had a "BUG" thats why the invalid F drive was showing up, thats why i could not upgrade to 7.5, and how a bug got into my ipod sense everything i have ever downloaded and uploaded has been off of Apple.s website, they assure that their songs are infected free, but i beg to differ since it took 4 years for my iPod (which was a week ago) to actually have a serious problem.

  • Thread- unfortunately the process com.android.phone has stopped working

    Hello Everyone,
    I am Rohit from India but recently moved to new Zealand. I have been fan of lenovo since 2008 when I purchased first laptop Lenovo 3000 Y 410. after that I have recently imporated Lenovo vibeX S960 phone.
    It was started and working well initially. but one day the message pop up about upgrade the firmware.
    I have updated it to Kitkat 4.4.2. After that I have been constantly getting message " unfortunatly  the process com.android.phone has stopped working".
    I have tried factory reset few times but the error has not been removed.
    I am annoyed by this problem.
    Kindly give me solution. pls

    try this: settings/appsswype to left until you reach ALL tab.scroll down to Phone icontap ittap on clear datatap on force stopreboot your device then try again with SSID code, if it still crash, only a factory reset probably will fix the issue.

  • Microsoft outlook has stopped working, close program, windows will check for solution

    outlook 2007, running window 7, office suite home and student 2007
    Outlook starts but then states it has stopped working and closes............
    Please any one help me for solution this problem.
    Email: [email protected]
    Chittagong, Bangladesh.

    Hi,
    Please try to open Outlook in safe mode to check if the problem will continue. To do this, exit Outlook, press Windows key + R to open the Run command, type:
    outlook.exe /safe and press Enter. If the issue would be gone in safe mode, Please disable suspicious add-in in your Outlook to resolve the problem. See:
    http://office.microsoft.com/en-in/outlook-help/enable-or-disable-add-ins-in-office-programs-HA010034127.aspx
    We can also try to create a new mail profile in Control Panel to check the result. To do this, please refer:
    http://support.microsoft.com/kb/829918
    If above didn't fix the problem, please try to run a repair of your Outlook installation and then test the problem again. See:
    http://office.microsoft.com/en-in/help/diagnose-and-repair-crashing-office-programs-by-using-office-diagnostics-HA001234076.aspx
    Hope this helps.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Itunes wont open and gives me a message saying "Itunes has stopped working".  What can I do to fix this?

    I use windows vista and I have upgraded my itunes.  Now when I open it, it gives me a message saying "itunes has stopped working"  and then gives me a message saying it will notify me for a solution.  What can I do to fix this so it can open and not give me any more problems???

    First you can try;
    Try restarting PC and run itunes again!
    If error again than perform clean instal of itunes (uninstal first and than instal again)!

  • Mozalloc.dll A firefox plug in container has stopped working. I can't get firefox to work for more than 2 mins. before crashing. How do I make this stop?

    AdapterDeviceID: 0x9712
    AdapterDriverVersion: 8.861.1.2000
    AdapterSubsysID: 164c103c
    AdapterVendorID: 0x1002
    Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
    AvailablePageFile: 13967405056
    AvailablePhysicalMemory: 6222434304
    AvailableVirtualMemory: 3783245824
    BIOS_Manufacturer: Hewlett-Packard
    BlockedDllList:
    BreakpadReserveAddress: 46661632
    BreakpadReserveSize: 41943040
    BuildID: 20141113143407
    CrashTime: 1417153956
    EMCheckCompatibility: true
    EventLoopNestingLevel: 1
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1416895140
    Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
    D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 175
    StartupTime: 1417153798
    SystemMemoryUsePercentage: 25
    Theme: classic/1.0
    Throttleable: 1
    TotalPageFile: 16630353920
    TotalPhysicalMemory: 8316153856
    TotalVirtualMemory: 4294836224
    URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
    Vendor: Mozilla
    Version: 33.1.1
    Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [UDP/IP] : 2 : 2 :
    MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
    MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
    RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    RSVP TCP Service Provider : 2 : 1 :
    RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    RSVP UDP Service Provider : 2 : 2 :
    useragent_locale: en-US
    This report also contains technical information about the state of the application when it crashed.
    AND:
    A plugin container for firefox has stopped working.
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: plugin-container.exe
    Application Version: 33.1.1.5430
    Application Timestamp: 54656826
    Fault Module Name: mozalloc.dll
    Fault Module Version: 33.1.1.5430
    Fault Module Timestamp: 54654321
    Exception Code: 80000003
    Exception Offset: 00001425
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

    Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

  • HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7.  Message shows that iTunes has stopped working.  This happens every time.  I have updated iTunes Software.  Will not solve the problem.  What is wrong

    I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded.  When I click on the iTunes Store Box, Nothing happens except for a message that reads:
              iTunes has stopped working.
    The following items give me a choice, but no answer comes up.  The computer will shut down the website.
              "Check online for a solution and close the program"
              "Close the program."
    There is an item below the box that is selectable for View problem details.  When clicked a long list of items show up.  I have listed some of the problems as written, but I do not understand them.  I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version.  How can we go back and download an earlier version of iTunes?
         Here are some of the Problem Details:
         "Problem signature:  APPCRASH
         Application Name:     iTunes.exe
         Application Version:  11.0.1.12
         Application Timestamp:  50c8fc7e"

    I had this exact same problem.  I found this fix and it worked for me. 
    Step 1:
    Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll. 
    Step 2:
    Browse and past that file into C:\Program Files (x86)\iTunes.
    Hope this helps you.  I wish I could remember where I saw this originally so I could thank them.
    Good Luck.
    Anthony

  • Can't get itunes.  I get the following message when I click on either the shortcut or the program.  It says ITunes has stopped working and I can either check on line for a solution and close the program or just close the program.

    When I click on the itunes shortcut or the program  I get the following message:
    ITunes has stopped working.  My two options are:  Windows can check on line for a solution to the problem or close the program. 
    It seems that my entire library is not there.  If I sync my ipod will it add it back into my library on the computer? 
    I've even tried installing again and nothing works.  Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
    Thanks

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • ITunes 10.3.1 has stopped working in Windows 7 64bit

    I just upgraded to Windows 7 64 bit and I downloaded iTunes 10.3.1 for Windows 7 64 bit.  My Quicktime player is working fine but everytime i tried to open iTunes, it gives me an error message that says iTunes has stopped working.  I need help trying to fix this, I already tried uninstalling, re-installing, and mostly every suggestion in the Apple support forum and it still does not work. 
    This is the information I have on the Problem Details:
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 10.3.1.55
    Application Timestamp: 4deec351
    Fault Module Name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 00000000
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.256.48
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

    Try copying the QTMovieWin.dll in the  c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.

  • ITunes has stopped working ...Running Windows 7(64)

    I upgraded my home PC Desktop to Windows 7 earlier this year and had no trouble bringing over iTunes from my previous platform (Windows XP).
    I recently returned home to the US from a work assignment out of the country and because my iTunes resides on my home PC desktop, I didn't open up iTunes for the past 6 weeks.  During this time Apple released iTunes 10.5. When I returned home, the old version of iTunes was still working. However, when I upgraded to iTunes 10.5, iTunes stopped working. The error message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    I have worked through the following knowlege bulletins (nothing has fixed my problem):
    (a)" iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues"
    (b) "iTunes: Troubleshooting issues with third-party iTunes plug-ins"
    (c) "iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio"
    (d) "Removing and reinstalling iTunes, QuickTime, and other software components for Windows vista or Windows 7"
    (e) "iTunes for Windows: system restarts, blue screen, or quits unexpectedly when accessing iTunes Store"
    the last bulletin (e), recommended ensuring that my drivers were up-to-date. So I also updated my drivers.
    Lastly, I contacted iTunes Store Customer Support (although my problem isn't with the store, it is upgraded iTunes running on windows 7). They told me the issue was "outside (their) expertise" and recommended I look at this discussion board. 
    Here is the information I found under Event Viewer:
    ==================================================================
    Log Name:      Application
    Source:        Application Error
    Date:          11/27/2011 11:46:01 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Theresa-HP
    Description:
    Faulting application name: iTunes.exe, version: 10.5.1.42, time stamp: 0x4ebf7d7c
    Faulting module name: MSVCR80.dll, version: 8.0.50727.6195, time stamp: 0x4dcddbf3
    Exception code: 0xc000000d
    Fault offset: 0x00026b72
    Faulting process id: 0x13b0
    Faulting application start time: 0x01ccad3d27f6b2ff
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d 09154e044272b9a\MSVCR80.dll
    Report Id: 6ef58025-1930-11e1-a798-e06995d0a503
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-11-27T19:46:01.000000000Z" />
        <EventRecordID>9927</EventRecordID>
        <Channel>Application</Channel>
        <Computer>Theresa-HP</Computer>
        <Security />
      </System>
      <EventData>
        <Data>iTunes.exe</Data>
        <Data>10.5.1.42</Data>
        <Data>4ebf7d7c</Data>
        <Data>MSVCR80.dll</Data>
        <Data>8.0.50727.6195</Data>
        <Data>4dcddbf3</Data>
        <Data>c000000d</Data>
        <Data>00026b72</Data>
        <Data>13b0</Data>
        <Data>01ccad3d27f6b2ff</Data>
        <Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
        <Data>C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_ none_d09154e044272b9a\MSVCR80.dll</Data>
        <Data>6ef58025-1930-11e1-a798-e06995d0a503</Data>
      </EventData>
    </Event>
    ==================================================================
    It seems that I am not alone in having this problem!  Are there any experts out there who want to earn the undying gratitude of the technically challenged (or a few expert points?)
    Thanks for listening,
    Theresa
    PS - someone recommended uninstalling Apple Quick Time Player.  I don't have Quick Time Player.

    I had the same problem. I'm using 64bit Windows7. This solution only partially worked for me. I still couldn't connect to the iTunes store.
    The following solution worked for me:
    COPY    QTMovieWin.dll
    FROM    c:\program files (x86)\common files\apple\apple application support\
    INTO     c:\program files (x86)/iTunes

  • Adobe Acrobat XI Pro causes an error when starting it - Adobe Acrobat has stopped working. How do I resolve this?

    I've had Adobe Acrobat XI Pro for some time, but yesterday it stopped working and I started having an 'Adobe Acrobat has stopped working' error. It then tells me to Close the Program.
    How do I resolve this?
    Thanks and regards
    Roxanne

    Thanks Pat. I was able to resolve the problem.
    OS is Windows 7 Pro, Adobe Acrobat Pro 11.0.07.
    I went into the Properties file where I identified that Users only had Read & Execute and Read properties, I changed properties for Everyone to Full Control. That fixed the problem.
    I don't know how the properties got changed to just Read & Execute, but there had been an automatic update the night before.
    Regards
    Roxanne

Maybe you are looking for

  • Credit block in delivery document (not in posting goods issue)

    Good afternoon! When I try to deliver an sales order with exceeded credit limit, the following occurs: I enter in tcode VL01N, input the order and press enter, then the system issues a warning "Credit user check 1 unsuccessful" because some condition

  • Document Flow and Additional Links

    We are attempting to create a linkage between sales documents that isn't naturally created through sales functions.  For instance, we need the ability to create linkages from one SAP sales order to another SAP sales order.  Thus, I have two questions

  • GRAPH_RECEIVE with Stat_5 (new load) ??

    Dear ABAP Guru's, as newbie I'm try to code a chart with differnd nodes. So my idea is, to refresh the complete content after an input command. The normal examples are all are updates in the grafic-content (stat_4). When I build the refresh content a

  • PDFs don't copy.

    I have an Inoi NAS drive, and whenever I try to copy a PDF to it, it is not openable on any computer. Preview and Acrobat both say that the file is corrupted. Interestingly, a few PDFs downloaded from websites work when copied, but any created on thi

  • Show more than 5 column in web analyzer

    dear all, how can i set web analyzer to show more than 5 column , for examples all kfigures in one page? thanks