My fast speed internet is so slow. I have Safari 5.0.6. Is this an old version or not compatible. Please help.
Please help me. I'm not the most computer literate person and I just advanced my internet service with Bright House Networks to 90 and they said my computer is faster than theirs but they are not here to see it is worse than dial up. They said it's not their network rather my operating system. I have an Apple Mac Mini with Safari version 5.0
6. Is there a faster Safari, does anyone have any advice for me? I would really appreciate any feedback on my issue.
Thank you in advance.
FlyMom737
If you have Safari 5.0.6 that's the latest version for 10.5.8 Leopard.
Can you test in a new or Guest user account on your computer ?. See http://support.apple.com/kb/ht2542 - it's easy to do.
Similar Messages
-
I'm using Image Capture over one year now, using wireless between my iMac and Epson XP-800 and sometimes very fast scans and quiet often very, very slow scans. I have tried to use Epson Scan Software 3.7.9f0 but not compatible with OS X 10.9.5x. There is very little other wireless traffic and I have a fast broadband connection. Thanks
Mike,
Thanks, but, I don't want more software as I have used both Epson and Image Capture. Is there not a solution with existing Epson and Image Capture..? -
I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestions?
The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
Additionally, your 24 hours don't start until you begin to watch the movie, you have 30 days to start watching the movie. -
Firfox requested to update previous version to new version of which i allowed. After installation complete i tried to connect to the internet and was denied with a following error window appearing. As explained above i shall explain again as shown in the error window.
XULRunner
Error: Platform version " is not compatible with
minVersion >= 1.9.2.16
maxVersion<= 1.9.2.16
This will not allow me to connect to the internet as i would like to continue to.
Please restore if possible my previous toolbar and able for me to connect to the internet.
Thank you.This issue can happen when the updater wasn't able to update all files in the Firefox program folder.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!
Try this link, warning, it's straight to download mode:
http://support.apple.com/downloads/DL1421/en_US/JavaForMacOSX10.7.dmg -
I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.
-
After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?
Logic's preference files may have become corrupted:
1. Quit Logic Pro
2. In the Finder, press and hold down the "option" key then select "Library" from the "Go" menu
3. Open the "Preferences" folder
4. Drag the following files to the Trash:
- com.apple.logic.pro.cs
- com.apple.logic.pro.LSSharedFileList.plist
- com.apple.logic.pro.LSSharedFileList.plist.lockfile
- com.apple.logic.pro.plist
- com.apple.logic.pro.plist.lockfile
These files will be re-created when Logic is next opened. -
after installing mountain lion I lost pictures in iphoto, lost my musisc in itunes, my icluod is not working, internet its very slow and some other issues. There is a way how to fix these issues
Open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it.
Now for your music. Launch iTunes. From the iTunes menu bar top of your screen click iTunes > Preferences then select the Store tab.
Select: Music. (and Apps and Books) if you want.
Click OK.
iCloud syncs via your Wi-Fi network so give it a minute or two to reset your photos and music.
Slow internet ... try turning off the modem for a few minutes, then turn it back on. -
I have tried seemingly everything and my phone will not connect. I have reset network settings, rebooted my modem, tried the series of steps listed starting with turing on airplane mode...nothing has worked. I have time warner internet service and it connects just fine with my mac and my husband's ipad and LG phone. I have tried typing in my network name but it always says "could not find the network", which is frustrating when I'm using "the network" to google search this issue. Please help!!! Thank you!!
D13, thanks for these details. This an awesome clue. Are you able to connect to this Wi-Fi connection with other devices? Let's try a few steps to resolve this issue.
First, reset the network in Settings>General>Reset>Reset Network and power your device off/on.
Secondly, delete the Wi-Fi connection in Settings>Select your Wi-Fi>Forget this Network and the try to connect to that Wi-Fi again.
Lastly, try creating your Wi-Fi connection. Tap Settings>Enable Wi-Fi ON. From Choose a Network, select Other. Enter the Wi-Fi network name. Select Security. Select the Wi-Fi network type then select Other Network. Enter the Wi-Fi network password then select Join
Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport -
Internet not working please help!!!!
hi i jus tried to download abode falsh player on my computer. it all downloaded fine and then when i went to go onto the internet my main search page is called babylon. the computer lets me on the internet and then as soon as i log onto facebook hotmail etc it comes up with internet explorer not working.it goes to troubleshooting but comes up with nothing wrong,what have i done??? i need to be able to log into my hotmail as i do all my own work invoices and have to sent them on but my computer now wont let me.please help. ive deleted all the things i downloaded and turned the computer off but still made no difference.please help thanks
steph,
Please re-state your premise.
1) Did you actually download and install an alleged adobe flash player, or not?
2) Was this download a "pop-up" during a browser session, or a "pop-up" on the taskbar?
If it pops up from the browser session, always ignore it. Go to the offical webpage and then download.
3) Was "babylon" your original main search page, or did you get it with the download install?
You could attempt to fix it with a restore point prior to the install of this program.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
Downloaded drivers from microsoft, now internet not working. please help
Internet connection lost after downloaded drivers updates
Install drivers from motherboard/notebook support pages.
I do not use optional updates, namely MS drivers.
Sometimes removing driver in Device manager and restart may cure your computer.
Consider HW and operating system update. From the point of view of security it is not wise to keep using Windows XP.
Rgds
Milos -
My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it. :-)
Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
ScottHey Scott
You and ALOT of people are attempting to do this, myself included.
Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
HOWEVER:
A few things CAN be done:
IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
(SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
Good luck!
Treatment -
Everytime i go into itunes and try to update my iPod Touch 4th gen running on iOS 4.3.5 its says i need to be connected to the internet please check it or something like that and as far as i know i have the latest version of itunes
What is the exact wording of the error message?
Maybe this:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Try disabling the computer's antivirus and firewall. -
Problem started after I unintentionally downloaded some adware 4 days ago. After lots of aggressive ads slowed down my browser I downloaded and ran AdwareMedic which seemed to do the job and browser was back to normal. Then, possibly a coincidence, everything on the computer started running slower. I've backed up everything and have run a EtreCheck report.
When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I had so many problems with IE,so I decided to try firefox.But now I cant find my"favorites" or my Zynga gamebar.Please let me know what to do....Thank you Sara
Sorry also intended to post this:
Importing Favorites and other data from Internet Explorer
https://support.mozilla.com/en-US/kb/Importing%20favorites%20and%20other%20data%20from%20Internet%20Explorer
Unable to find your Bookmarks after Importing them
https://support.mozilla.com/en-US/kb/Lost%20Bookmarks#w_unable-to-find-your-bookmarks-after-importing-them
Maybe you are looking for
-
Display Values of predefined properties in XML Forms
In EP60 SP11 we have created several XML Forms with XFBuilder. In these forms several metadata properties are used which have predefined values available via a metadata extension. Everything works fine, except for the display of the predefined values
-
I have a 15 inch powerbook G4 1.5 Ghz, with 512 MB of RAM. It was purchased a little less than a year and a half ago. The battery life on it was never very good (maxing out at about an hour and thirty minutes), but recently it's taking a turn for the
-
Defining Selection-Screen Depending on Client
Good Morning, I need to hide one parameter from my selection-screen depending on sy-mandt. Is it possible? If yes, can anyone show an example? Regards, Pedro Gaspar
-
Read through Scheme in Replicated Cache with berkely db
Hi i have a 20 gb of data, while restarting the server i need to populate all the data in to coherence cache.if i create a pre load java class hadrly it will take 30 mins to 1 hour to load the data in to cache, while loading time if any request came
-
Hello: I am running iPhoto 11, Version 9.2.1 and I am unable to located the search field. I installed a Dupicate Annhilator Application and found 7500 duplicates and it requires that I enter "Duplicate" in this field to locate the duplicates for de