My favorites page is totally frozen

my favorites page is totally frozen--I can't access the recents, voicemail, etc on the bar at the bottom either. Anyone encounter this problem and is there a way to deal with that issue only?

Oh it works as is plainly demonstrated in several threads. The quote below is by aspergerguy . It may not be a good idea but on the several occasions the phone has bricked it's the only thing that worked. A hard reset wasn't possible as pressing the buttons did absolutely nothing. Heating it may well damage it.Lumia is relegated to spare phone, but since unlike my other spare phones, including an E72 ,which happily recharge from dead, the option is warm it or keep it as a brick.
"If you warm up a fully depleted battery because it excites the molecules you will get a bit more power released just for a short period, which might perhaps be sufficient to kick start device; it is however not to be recommended as could so easily damage plastics within the device."

Similar Messages

Ipod is totally frozen

I went to charge my ipod from my computer and when i put the adapter into my ipod, it turned on but not it is totally frozen and wont' turn off! The backlight is still on and I tried resetting it and it won't work. None of the buttons are working or anything. I can't even turn it off. I am using an Ipod Nano! Please Help! What can I do? RESETTING IS NOT WORKING!

Work your way through the 5 R's on this page:
http://www.apple.com/support/

My iphone screen has totally frozen and i cannot even turn it on or off the screen is fixed including the time and i cannot receive calls or texts.

Hi. My iphone screen has totally frozen I went to slide across to use my phone and the arrow is stuck to the right and the screen is fixed. The time is frozen I have tried turning the power off but i can't even do this. I cannot receive calls or texts. Please help!!!

Follow http://support.apple.com/kb/TS3281

XML Publisher - Page Wise Total

We are facing problem in incorporating ‘Page Wise Total’ in Invoice Report - Invoices print at format CAP_ETA for Germany. It an XML Report and its output appear in PDF format. As per the new requirement sent by L1 team, we are required to make changes in RTF, to show ‘Page Wise Total’.
We have worked on this enhancement but unable to display ‘Page Wise Total’. We are able to display Sum Total of all the records appeared in three different blocks of records for that particular page at the end of the footer of Page, but not yet able to SUM UP total of these three Sum Total of three different blocks on that particular page.
For e.g. First page of my XML Report display three different Block of data as shown below with Subtotal of 38,600.00, 4,453.47 for 1st and 2nd Block respectively, but 3rd block records appeared partially on the first page and remaining appeared on the next page. So My Report should display ‘Page Wise Total’ or ‘Amount Forward’ as 52853.47, which sholud be carried forward to next page as ‘Amount Forward’ - 52853.47. The next page/second page will dispaly the remaing line records of the 3rd block and Subtotal( Please see attachment New_Layout_Invoice_TUM_English.doc)
Name Description Unit Quantity Price Amount in Euro
Rösner Fees Day 17.00 1,400.00 23,800.00
Schreiber, Clemens Fees Day 2.00 1,400.00 2,800.00
Slegers, Arnd Fees Day 4.00 1,400.00 5,500.00
Weiler, Andreas Fees Day 4.00 1,400.00 6,400.00
Subtotal: 27.00 38,600.00
Römer, Michael Expenses 2,253.79
Schreiber, Clemens Expenses 157.69
Slegers, Arnd Expenses 519.78
Weiler, Andreas Expenses 1,522.21
Subtotal: 4,453.47
Rösner, Michael Travel expenses 2,400.00
Schreiber, Clemens Travel expenses 2,000.00
Siegers, Arndt Travel expenses 1,800.00
Weiler, Andreas Travel expenses 2,000.00
Marek, Gruchala Travel expenses 1,600.00
Amount forward 52853.47
As mentioned above we are able to show independently three different Page Wise Total of each of these blocks by using syntax:
<?add-page-total:block1amount;’L_AMOUNT’?>, this syntax is used to sum up all the line records appeared in a block for a particular page and
<?show-page-total: block1amount;’#####.##0,000’;’ ###.##0,000)’?> is used to display the Sum Total calculated by above syntax.
But we are not able to further sum up all these Page Wise Total of different blocks.
Please find attached copy of RTF file from Production (V18_CAR253E1), copy of RTF (V18_CAR253E1_TEST Where we are testing these new changes) and .out XML output file.
I need help on this issue
Thanks & Regards,
Praveen S Negi
[email protected]
91-09930799325

Hi Praveen,
You got the solution for page total in Invoice Report in XML publisher report.
Can you pls help regarding the same, i want to display total amount in the invoice report.
Thanks in advance,
Sunny

How to print page no/total pges in report programing?

how to print page no/total pges in report programing?

Hi
This is an example:
In TOP-OF-PAGE you can write:
WRITE: SY-PAGNO, '/', '-----'.
When the program has finished to print all data, run a routine like this:
Declare a variable
DATA: L_PAGE_COUNT(5) TYPE C,
      V_LINE TYPE I. "The line where page number is written
* In my example I suppose the page number is always
* written in the first row of the page.
V_LINE = 1.
* Copy this code to the end of program
* Page count will be printed on each page here
WRITE sy-pagno TO l_page_count LEFT-JUSTIFIED.
DO sy-pagno TIMES.
    READ LINE V_LINE OF PAGE sy-index.
    REPLACE '-----' WITH l_page_count INTO sy-lisel.
    MODIFY CURRENT LINE.
    ADD 1 TO sy-index.
ENDDO.
Max

Page level total in a mulipage matrix report

hi!
I am facing a problem in marix reports because a very late change in customer requirement.he wants a page total at the end of every page in the report ,because these reports are matrix style,they involve cross product.i can get the grand total at the end of the report because the summary column works well at report level,but when i try to reset it at page level,at times it shows blank or generates an error that matrix report fetches everthing at report level and cannot generate results at page level.but now how do i get these page totals without changing these matrix reports.Plz reply ASAP
Regards
simer
The Oracle Reports Team
http://otn.oracle.com/

Hi I was browsing through the forum, and found no reply to your question, if you still interested about the solution I can send you my RDF file where I did the page level total in matrix report as well as brought
forward in next page, this is something very hard for me to explain in word, so if you can give me your email address I can send you the RDF file.
Thanks & Regards
Eamon

Hello. My iPad2 shows a message of iCloud Setup "Ingnore or Settings". When I press on either, it doesn't do anything. Screen is totally frozen. I have turned it OFF and ON and the message keeps coming back. Any ideas of what to do? Thanks

Hello.
My iPad2 shows a message of iCloud"Ignore or Settings". When I press on either "Ignore or Settings" it does not do anything. The screen is totally frozen. I haved turned it OFF and ON , but message keeps coming back.
Any ideas?
Your help is highly appreciated.
Thanks,
Caro

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Urgent:page wise total in smartforms

hi,all
How to do page wise total in smartforms ?
use table in smartforms for summary in pagebreak
ex. page1
10 (line 1)
20 (line 2)
30 (line 3)
total 100
page 2
40 (line 1)
50 (line 2)
total 50
Total in page 1 incorrect = line1(page1) + line2(page1) + line3(page1) + line1 (in page2)
Total in page 2 inccorrect = line2 (in page2) .
please help me guys to solve this problem..

r u printing the internal table data using the TABLE node then--> in the Calculation tab u can do this.
first create a variable in Global difinations-->global data tab.(ex v_tot)
then in the TABLE>calculations TAB> 1select ->sum then 2nd colun>give the field name which u want to calculate (ex-wa_itab-netwr) in the Target Filedname tab> give the varialbe u have declared for the total(ex v_tot). in TIME colums select AFTER theLOOP...
then in theTABLE>footer>inset a line display the variable(total u r using).here
after the the printing the total..->create a program lines> cleat the v_tot... why u need to clear this is.... u want to display only the total value which are displaying in the current page... after printing this v_tot... clear this... so that in the next page it start totaling the freshly...
lem me know if u have any clarifications.
u can calculate as the above way for all the 6 fields.
please Avoid postin duplicate threads

Latest ep of my podcast doesn't show in iTunes. Subscribers CAN download it. Podcast page shows 'Total: 3 items' but lists only items 2 and 3. RSS feed is validated and fine.

Latest ep of my podcast doesn't show in iTunes store. Subscribers CAN download it. Podcast page shows 'Total: 3 items' but lists only items 2 and 3. RSS feed is validated and fine. How do I get iTunes to display it?

I've used Feedburner many times and never had such a problem. I am a bit confused, forgive me if I ask for questions already answerd. Have you tried updating the podcast in someone elses copy of iTunes? My guess is that the file is bad since it is working in other programs but not iTunes. I would try making a new .mp4 file and podcasting it and seeing if that works.
Good luck!
~Ben

I want to see more 'favorite pages' in my toolbar!

I want to double my toolbar because I want to see all my icons from favorite pages.

I figured it out myself. Right click on the icon in the bookmarks toolbar and go down to properties. Where it says name you can leave blank or put what you want. Works just the way I want.

JSF datatable pagination - showing page wise total.

Hi All,
i am ok with normal pagiation. but i have a requirement to show total count of a column page wise in the footer and also total count of th column at the datatable bottom.i can able to get total count but how can we show page wise total count in the footer of datatable. please help me in this
Regards,
A.

So you want something likedouble subTotalPrice = 0.0d;
for (int i = dataTable.getFirst(); i < dataTable.getFirst() + dataTable.getRows() && i < dataList.size(); i++) {
    DataItem dataItem = dataList.get(i);
    double dataItemPrice = dataItem.getPrice();
    subTotalPrice += dataItemPrice;
return subTotalPrice;?

White triangles appear in Favorites page

Hi all,
I am having some trouble with Safari's favorites page: when the bookmarks bar is open, white triangles appear on the page. Furthermore, when a webpage is open, one appears at the bottom of the bookmarks bar (beside the Edit button). They tend to move around arbitrarily, and it is difficult to get a screenshot as they have a habit of hiding. I did manage to grab one, however. Any ideas what this is or how to fix it?
I'm running 10.10.1 on a mid-2010 MBP, 2.66GHz, Nvidia GeForce GT 330M 512MB.
Thanks!

Might be a cookies, cache, extensions, or plug-ins issue.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, from the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

Recently upgraded to Mavericks... was working with Pages documents from previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents.

Recently upgraded to Mavericks... was working with Pages documents created with previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents. How can I "thaw".... unfreeze Pages? Have several pages windows open that I was working on.

I also had this problem after I installed Mavericks: Pages files freezing at close, need to force quit.
Workaround: when saving any document created with an earlier version of Pages, be sure to untick the "include preview in document".
For some reason, this resolves the problem.
BTW "loose" is not a verb. You probably mean "lose".

Page level totals in a matrix report

hi all,
Is it possible to have any kind of page level totals in a matrix report??
i tried it manually, but it gave me an error as follows,
REP-1266: Column '<column name>': Page Level columns are not allowed in a Cross Product.
Thanks
Martin

Martin,
Is one of your report Repeating frames set to break on pages? If so, then go to the data model and create the variables you need inside the group of the repeating frame. If you are doing a summary column, don't forget to set the repeat at: property correctly. Then just carefully add the fields to the layout. The matrix layout can be very difficult to work with so what I do is carefully expand out all the frames so they are not overlapping with the outermost frame being on the very outside. Use the Fill Color setting on the layout to paint the frames so you can see what is sitting on top of what. It may take a few shots to get it right.
Have you worked with Oracle analytic functions? They can really make your life easy by doing all of the summing at various levels. Also look into GROUPING SETS they are the bomb! Check out the URL below for more info:
http://orafaq.com/node/55
Good luck,
matt

Can I have more than 9 favorite pages displayed in FF13's "new tab" feature?

I love the tiled window displaying my favorite pages when i open up a new tab in firefox 13 update. Is there a way that i can have more than the 9 displayed at a time? Maybe have 12 or 15?

There is no built-in way to change the number of page thumbnails on the tab. However, someone might develop an add-on to tweak the new tab page if there's a lot of interest.

My favorites page is totally frozen

Similar Messages

Maybe you are looking for