My files have turned into Unix files!

I recently began transfering my sound libraries from a drive on my old G4 Dual 1.42Ghz to the drive on my "pre-owned" Dual 2.0Ghz G5.
I had a folder on my G4 with Rex files in them.
When I transfered them over to the G5, I noticed they had become Unix exec files? What are those? I think the files got swithced from Rex1 to Rex2 files, but I'm not 100% sure. How do I get my Rex files back for use in Logic and Reason etc....
Thanks
Noah

I realize what it is. The Unix info is there until I install the application that created it. It shows the extention .rx2 but the file icon displays it an 'exec' file.
I've been switching everything over to my G5 and had not installed Recycle yet. Those Rex files were all created with Recycle. Once I installed Recycle and opened that folder again, they all had the blue Rex/Recycle icon. They were fine.
It would be great if Logic could read the exec/Unix/.Rx2 files, in case I didn't need or want to install Recycle? Which I didn't, cause I don't use it much anymore. I tried to drag the Unix/exec/.Rx2 file into Logic but it wasn't recognized. After all, Logic does play Rex files...
Hey, I answered my own question!
Noah

Similar Messages

How do I open my old Appleworks documents which have turned into Unix Executable Files? I would like to convert them into Pages documents.

How do I open my old Appleworks documents which have turned into Unix Executable Files? I would like to convert them into Pages documents. I also have old Word Perfect documents which have become similarly unopenable.

Best bet might be to try opening them using LibreOffice [free] and save them to .doc.
Do you really want to save them as .pages files? You are jumping from the frypan into the fire. Yet another proprietary format that Apple has again deadended with no working translation.
Peter

MPEG Layer 3 audio files have changed into MP3^^ files,What is ^^

MPEG Layer 3 audio files have changed into MP3^^ files,What is ^^ and why wont the music files play anymore??

I reinstalled OSX on my macbook which previously played all avi files with no difficulties. Now I am having difficulties playing Avi files with quicktime PRO that use the Mpeg layer 3 codec. I have done the following with no success: downloaded flip 4 mac, divx, xvid, 3ivx, Xvid codecs, changed MIME settings, and deleted and reinstalled.
Depending on the specific version and sometimes the ordering in which they were installed, you may have created a conflict among the components here. While most current VidX components should be able to play MPEG Layer-3 audio, v5.1.1 is the only free VidX codec that is bi-directional. If that is not a problem, then I would recommend you remove (or "hide") all components in the main "Library > QuickTime" folder. Next I would determine if one (or more) of the AVI associated components can actually play the specific files mentioned on their own. You do this by installing a compenent to be tested, opening the player with one of the problem movies, and checking for correct audio and video playback. Log your results, close the player, remove the tested component, and move on to the next component to be tested. Once you deterime which component(s) may function correctly, I would then move on to determine which specific components are in conflict by repeating the tests but leaving the components installed after each test. In this case start with a component that is known to work and is the one you most desire to use (if more than one works). If the player stops working, then you have located a potential conflict. Set the offending component aside and continue testing until all components have been tested and are either installed or set aside. The last step is to simply evaluate component alternatives and configure you system for those files most often played. In my case the VidX v6 Pro components did not seem to get along with the 3ivX D4 v4.5 and/or Casio AVI and/or XVIDDelegate component combination.

File folders turn into exec files

On a school iMac, I created folders which contained html, jpg, pdf files and other folders. I copied these folders to my thumb drive (the one I use all the time). When I got home, I put this thumb drive into my iMac (Yosemite OS) to finish the folder transfers. When I found the folders I was looking for, they had turned into exec files. What happened?

We need some clarification here. Specifically, you say:
When I found the folders I was looking for, they had turned into exec files.
What turned into "exec" files? The folders, or the files inside them? And when you say they are "exec" files, what exactly are you seeing?
One possibility is that the files you created have all changed to look like this:
If that's the case, then most likely you have somehow created those files without an extension, which means that Mac OS X has no idea what they are. You need to add an extension at the end of the filenames: .html, .jpg, .pdf, etc.
One other possibility, which Tim mentions, is that you have connected this flash drive to a Windows PC that is infected with some kind of malware that has replaced all those files with malicious .exe files. These would not affect your Mac, but would certainly affect the data on the flash drive. Do the filenames end in .exe or .lnk?
If none of that matches what you're seeing, we'll need more details. Screenshots would help. Make a screenshot by following the directions here:
http://support.apple.com/kb/HT5775
Be sure no sensitive personal information is displayed. To add that image to a post here, click the camera icon in the post editor toolbar.

Files downloaded turn into QuickTime files and not iTune Files!

Hi folks,
I am downloading some songs from mp3search.ru (very very cheap mp3 site) and they are downloaded as iTune files (which is what I require), however, when they download fully they become Quicktime files!
I now have to change them individually to be opened with iTunes but they remain QT files!!
How do I stop QuickTime from being the default and dictating itself as the main MP3 player?!
Thanks
Tc

well, today I browsed iTunes, happened to find something I liked and thought I'd give it a go..
After checking this bit:
Import in An Instant
To import songs into iTunes, just insert a CD into your computer and click Import CD. Or set up iTunes to automatically add music when you insert a CD. Either way, iTunes imports music in a snap. iTunes saves music from your CDs as high-quality AAC files — a format that builds upon state-of-the-art audio technology from Dolby Labs. But you can choose different audio formats, too. iTunes lets you convert music to MP3s at high bit-rate at no extra charge. Using AAC or MP3, you can store more than 100 songs in the same amount of space as a single CD. iTunes also supports the Apple Lossless format, which gives you CD-quality audio in about half the storage space.
then registering an account I felt sort of confident, not in the lack of looking, the information is just hot air anyway rwitten by halfwits, but this was what it seemed..
BUT LOW AND BEHOLD,
None of this happened
I end up with M4P files.... *** are those...
Burning my new purchase onto a disc didn't work in my stereo
I'm really p*ed off about this matter, measly 10 $ maybe, but the disappointment in being aggravated this way adding to increasing dismay, that you don't get anything face value from practically any commercial company anymore, seriously gets my fumes going, cos I could have gone to the record store, taken care of everybody and probably walked out with two great discs for the same price and half the time I spent sorting my anger
I'll say it again, software designers stay the f* out of my way and start doing your jobs and provide the service you advertise using the KISS principle... stop jacking around
H*ll even the buttons in here don't work, trying to highlight in italic the quote from iTunes store...
Someone explain me how I get, as they state I could and should, buying my record in the iTunes store and get it on a CD so I can play it on my stereo, cause as we all know the G5 comes with f* all speakers..
Kind regards with a bird to all these internet scams
G5 Mac OS X (10.4.5)

PDF files that turn into 08 files

Hi Guys,
I am a l2 remote desktop support analyst and had a user who was saving pdf files using adobe reader 6.
When the user saved the files and went back into them he noticed that they were saving as a 08 file and could no longer open them in Adobe 6.
My question is, is there any way to open these files again and also what causes this issue?
Thanks
Robert

What happens when you change the extension to .pdf ?

Files in my pen drive somehow turned into .Ink files.

Files in my pen drive somehow turned into .Ink files. They were working fine before that, and i only used my macbook. Did not copied any windows files and i didn't use a pc. How can i get my files back?

No, i don't have windows in my MB.
I did use this pen drive in a pc, but only to get some files that had nothing to do with the files that were already there. Do you think this may have turned my other files into .Ink files?

After deleting some unnecessary Apps in my Macbook Pro, I plugged my thumb drive to discover that I can't open my files, which I normally can, because they've turned into ".lnk" files. Please help.

I have files in my thumb drive that I cant open. Inside my thumb drive, I've organized files in folders but I have files I havent put in folders yet. Those files turned into .lnk files.
My theory is, my thumb drive caught a virus from another laptop because I copied files from my colleagues laptop.

There are no viruses for a Mac, new theory required. .lnk files are aliases to a file, what did you delete?

All files on USB turn into .ink files

Whenever I put a flashdirve on my macbook all the files and folders on the usb turn into .ink files and I cant open them on a mac. I need to solve this problem ASAP because Im afraid to put my hard disk and loose all the files on it. This happened to 4 of my USBs and i have no backup of some of the stuff on them.

I spoke with the techs at apple support, they likewise were stumped. His suggestion was that I reformat the drives as Mac OSX journaled. He thought the FAT32 may have been the issue as it is not natively supported by the Airport Extreme, but also was not positive since it is one specific folder out of 500 or so on my drive that is having the problem... he thought it may be the content. Unfortunately, the content in that folder is not different from any other folder on the drive. It is set to use accounts and not a single password. All the settings for permissions, etc are correct to allow anyone to access/read/write to the drive and folder... really baffled.
Going to try formatting the drive and then giving it another go.
thank you

When I try to download a pdf file it turns into a .do file and can't be opened by my Samsung note 3

When I try to download a pdf file it turns into a .do file and can't be opened by my Samsung note 3. Once downloaded the file can't be found in any part of the device memory and can't be opened by the browser mozilla.

Hello there,
Have you checked if your PDF Plugins are updated? https://www.mozilla.org/en-US/plugincheck/
For more options: https://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them
Hope this helps!

Re-named NEF & jpg files in CS4 Bridge & they turned into "exec" files!?!? SOS

SOS!!! I just re-named NEF & jpg files in CS4 Bridge & they turned into "exec" files (& the WEDDING GIG images disappeared!) HELP PLEASE, anyone who knows the solution. I'm desperate.

God bless you!…I tried it with the 1st 2 files, which were NEFs & it worked. BUT I started with Raw & then shot mostly jpg…cannot "see" anything & am clueless as to which are which / any other ideas?

About download file into unix file

Hi expert,
i use the openset to write file into unix file server.
but why there are some space at the end of every line.
by the way, i works very well in windows server
   DATA: DATA_TRANSFER(70).
    Data: DATA_TRANSFER type string.
    data: fine_riga1(1) TYPE X VALUE '0D0A'.
    DATA: gt_data TYPE STANDARD TABLE OF ty_data.
    Constants: ascii_tab type x value ','.
    field-symbols: <f> type any, <delim> type any.
    "Assign delimiter field such as tab or comma.
    assign ASCII_tab to <delim>.
    CLEAR VN_CNT.
    concatenate DSNU 'employee' PN-BEGDA SY-UZEIT into P_UNIX.
    OPEN DATASET P_UNIX in legacy text MODE FOR OUTPUT. " IN TEXT MODE encoding UTF-8.
    IF SY-SUBRC <> 0.
      WRITE: / 'Error on file open:', P_UNIX.
    ELSE.
      LOOP AT TI_DATA .
        CLEAR DATA_TRANSFER.
        concatenate TI_DATA-TYPE
                          TI_DATA-PERNR
                          TI_DATA-ZAUSW
                          TI_DATA-ENAME
                          TI_DATA-TERID
                          INTO DATA_TRANSFER separated by cl_abap_char_utilities=>HORIZONTAL_TAB.
        CONDENSE DATA_TRANSFER NO-GAPS.
        TRANSFER DATA_TRANSFER TO P_UNIX.
        ADD 1 TO VN_CNT.
        CLEAR DATA_TRANSFER.
      ENDLOOP.
      CLOSE DATASET P_UNIX.
    ENDIF.
    WRITE: / P_UNIX,
           / 'Transfered', VN_CNT, 'records'.
Best Regards,
Kevin

Hi,
Try this way...
TRANSFER dobj TO dset [LENGTH len]
                                      [NO END OF LINE].
Addition 1
... LENGTH len
Effect
This addition determines how many characters or how many bytes of data object dobj are written to the file. len is expected to be a data object of type i that contains the number of characters or bytes. In text files, the content of len specifies the number of characters that are written from the storage. For binary files, legacy text file, and legacy binary files, len specifies the number of bytes that are written to the file. The first len characters or bytes are transferred and alignment gaps are included in the structures. If the addition LENGTH is not specified, all characters or bytes are transferred.
If the value of len is less than or equal to 0, no characters or bytes are transferred. If the file is opened as a (legacy) text file, however, a line end marker is inserted into the file by default. If the value of len is greater than the number of characters or bytes in dobj, hexadecimal 0 or blank characters are transferred to the file instead of the missing bytes or characters, depending on whether the file was opened as a (legacy) text file or a (legacy) binary file.

When syncing iPhone 4 with new update songs turn into "other" files

Hello,
Yesterday i upgraded the iphone software to ios7, after doing this everything was working well but when it tried to sync my music files from itunes it said it was syncing music file until the iphone had synced completely when they turned into "other" files. I ahve tried restoring it but nothing has worked and it keeps happeneing. Was wondering if anyone was also having this problem and could point me in the right direction.
Thank you inadvance.

So far there is no fix, there are many threads on this topic and many people with this problem. We are all ticked off and Apple needs to fix this ASAP. They don't seem to care.

I'm having trouble with popups on my mac book pro constantly along with words on every page that have turned into links. how do i fix this???

i have pop ups constantly from mackeeper and many other websites. i also have noticed that some words on all websites have turned into links... how do i fix the problem??

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

All icons on my Macbook have turned into blue circles?

All icons on my Macbook have turned into blue circles. Please help.

Might be corrupted Safari preferences...
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Safari/WebpageIcons.db
Click Go then move the WebpageIcons.db file to the Trash...
Quit and relaunch Safari. Webpage icons should reflect the sites you visit now.

My files have turned into Unix files!

Similar Messages

Maybe you are looking for