My final cut 10.0.5 will not share.

Hello Everybody, After I upgraded to AOS 10.8.1 my Final Cut Pro 10.0.5 will no longer share. What can I do?

Be certain you have the Project Timeline selected before you go to 'Share'.
If this doesn't work, use Finder to move the FCP X app to the Trash and reinstall it from the App Store.
(Make sure no backups like Time Machine are on mounted drives at the time).
If this doesn't fix it, reinstall Mountain Lion.
Andy

Similar Messages

I cleared out a movie I made in final cut pro, now fcp will not open completely, I get the logo with all the names running through but never get timeline, browser or anything else? Help!! Larry

I removed a movie I had made and now when I try to open final cut pro, all the stuff shows up with the names, etc, but that is it, I don't get anything else, and, final cut does not show at the top of my computer. I have the 27 inch iMac with the intel processor, any help will be appreciated. Larry

Sounds like you may have deleted more than just the movie file. It the FCP application in the Applications folder? if so, try launching from there. If not, you'll neeed to uninstall the app completely using this: http://www.digitalrebellion.com/fcsremover/ then reinstall from the original install discs.
You may want to first try trashing FCP's preferences.
-DH

Final cut pro crashed and will not open back up..

Final cut pro crashed and now when I try to restart it, all I get is a spinning wheel….any suggestions?

Hold Option-Command when you launch the application to reset the preferences.

My final cut pro x update is not working?

My final cut pro x update is not working for 10.0.3
I'm very upset, somesone help me I'll update lastest version of FCPX.
my version is now 10.0

Then perhaps you should post your question in the FCP forums rather than the iPhone forums.

Final Cut 6 and Color does not work

Hello,
I bought FInal Cut Pro Studio 2 and i receive the suite today and instal only apps ( no contents and loops )without problem
Tried to open FCP6 and Color but not working.
i launch FCP 6 or Color,2 jumps on dock and then quit.
can be memory problem.( i have 768RAM on my imac G5 64VRAM)
any pacth to resolv this problem?
ps* SountrackPro 2,DVDStudio Pro,Motion3,LiveType,CinemaTools and Compressor woks fine in the same computer
Computer configuration
IMac G5 1.6 with 64VRAM and 768RAM
thx in advance

Ok,forgot Color,but and about final cut 6 ? why does not work?
max resolution 1440x900.
i was looking the systen requirements on fcp page
Minimum Requirements to Install All Final Cut Studio Applications
Final Cut Pro 6
Macintosh 1.25GHz or faster PowerPC G4, PowerPC G5 = OK
1GB of RAM = NO,my iMac have 768RAM
1024-by-768 resolution or higher OK
Mac OS X v10.4.9 or later OK
QuickTime 7.1.6 or later OK
A DVD drive for installation OK
Can i deduce that problem is because i don't have RAM enought?
THX

Hello guys, so help me, if i will buy a final cut pro from appstore, will i have a .dmg or other type of file, for reinstall it in another mac?

hello guys, so help me, if i will buy a final cut pro from appstore, will i have a .dmg or other type of file, for reinstall it in another mac?

No. You simply sign in to the App Store and download it again. AppStore knows that you already paid for it.

Help! My final cut pro won't export or share

My final cut pro won't export or share just keeps saying 'The operation could not be completed. (com.apple.compressor.compressorkit.errordomain error -1)
Anyone got any ideas how to fix this?
Thanks

Is App Nap disabled for FCP X? In finder, select FCP X, get info, uncheck the app nap box.
We need to knwo alot more in order to be abvle to help you - What ver. FCP X? What ver. OS X? Your hardware?
Look at these links:
http://www.larryjordan.biz/fcp-x-advanced-trouble-shooting/
http://www.lafcpug.org/Tutorials/basic_fcpx_share_export.html
http://fcpx.tv/Pages/shareexport.html
can you post a screen shot of your open app? What are your project settings? What are your export settings?
Good Luck --

Final cut will not share file

I have just completed a file. (1.3 hours long) I am using an Lacie external work from and save to. I can not share this file in order to make a DVD. One frame is saved not the entire file... Sugestions please. I've put in many hours to comeplete this

Annoyed with JVC/Final Cut Pro import problem; will they ever fix this?

Annoyed with Final Cut Pro JVC import problem; will they ever fix this?
I've shot footage on JVC GY-HD111E in the UK in 720p/25p PAL mode.
I'm trying to import lots of short clips (average 10 seconds) into Final Cut Pro (latest version with 720p/25p support) with a new Mac Pro maxed out with ram and 3 extra internal HDs.
Problem is, on a scene-break i.e. pause/stop, Final Cut detects this and creates a new clip, but it takes about 5 seconds to 'searching for media" before it starts the new clip. Because some clips are only very short, this 5 second delay sometimes means I only get the final few frames of a clip, rather than the entire 5 seconds or so of it.
JVC UK are blaming Apple and are saying it is up to them to fix it as Premiere and Edius does not have this problem.
However, Symbiosis in the UK (who do HD-Connect box) say that the JVC ProHD cameras do not wrap the shots up properly at the end, they are kind of left open and this creates problems on scene-breaks.
I've tried turning off the "create new clip on timecode break" etc, but it does not make any difference, when I do this it simply quits capturing on a scene break. Besides I have about 300 cutaways like this and I don't want to spend the rest of the year breaking them up on the timeline as this would be a futile and long workflow.
I'm importing and working on a native HDV 720p/25p timeline and this is the way I want to work. I've already imported and edited 4 hours of footage, but these 4 hours were easy as all 4 tapes had no start/stop points, they were recorded continuously from beginning to end of tape for 64 minutes each time so importing was no problem; 1 clip per tape.
But now I've come to my 5 tapes containing hundreds of cutaways I'm kind of screwed and need some advise on how I can import them natively in HDV without losing this 5 seconds off the beginning of each clip whilst FCP searches for the media each time.
I've been told this issue is definately with FCP, any ideas how I can get around this?

I haven't heard of this JVC/FCP problem, so I can't comment on it. However, whoever shot the cutaways didn't do you, the editor, any favors.
I've been doing video since 1984, and I've got to say, anyone who shoots a scene that is only 5 or 6 seconds long on tape is making a huge mistake, and it's been that way since the beginning of computerized editing in the late 70s.
Shoot at least 5 seconds of pre-roll before the shot begins, then roll tape for at least 5 seconds after you've got the shot. That's the protocol I've followed for 22 years now. Tape is cheap, edit suite time isn't.
But laying down only 5 to 6 seconds for a scene is wrong, IMO.

Final Cut Express HD 3.0- NOT compatible with intel I Mac ????

I just bought a new I MAC running 10.5.2 and for some reason when I try to load Final Cut XPRESS HD 3.0, it loads just fine but when i try to launch, an error window pops up stating this software requires certain hardware or software which is missing. * AGP GRAPHICS CARD. And then proceeds to NOT launch the program.
Hmmm??? My graphics card is: ATI RADEON HD 2600 PRO. I had the first IMAC 20"(white body) and loaded the same program on that machine. It worked great.
I will be bummed if this intel thang is what is cutting my feet out from under me.
Thanks for any help.

It's on the forum like every other day. Press the escape key to bypass the message. You're using non-Intel software on an Intel machine.

If i buy final cut studio 2 and then get final cut studio 3 upgrade will it be final cut studio 3

ive been looking around to buy final cut studio 3 for weeks now with no success and i think ive found a solution i'm just wondering if it will work by buying final cut studio 2 full and then buying final cut studio 3 upgrade overall will everything be final cut studio 3?

You can still get the FCS3 upgrades from the apple shop
No you can not get FCS upgrades from Apple retail stores or Apple dealers, they have been recalled by Apple.
Only places that will stock is independant retailers and online used software vendors.
Apple have clearly stated that FCS is now ''end of life''

Final Cut Studio 2 and Macbook (not Pro)

Curious to know if anyone has any experience running Final Cut Studio 2 on a non-pro Macbook. Can Macbook handle Final Cut Pro alright? Is video memory an issue?
Thanks,
Mbs

For the record, Motion will run on a MacBook. It's just that some of the features aren't supported, and will produce incorrect results. So I wouldn't rely on it.
Final Cut, however, works perfectly. No problems at all.

Final Cut Pro search window does not SORT.

I am an editor and I use Final Cut Pro everyday. I recently had to upgrade to LION because of a wonderful Quicktime update that corrupts
video codec files on Snow Leopard. So now that I have LION I can actually edit again. But, when I try to import files into Final Cut the
search window wont sort my files by date, name, etc...
It wont actually sort by anything. Every other program works fine for that, mainly After Effects. I have to manually go find files that I used
to give a certain naming system to because I could find them easily by typing in one word.
I also cannot search the Network anymore at my office which is a real pain. We dump all our finished projects onto a huge server. Now
when I need to find an old file I have to know the exact date it was made or else I have to go searching through every folder in our server.
Any body know of any way to fix these issues without having to rewrite code which I really don't want to do with my company computer.
Also our IT people refuse to learn anything at all about MAC computers which is SO helpful...

Im not sure what you are referring to. Maybe I didn't explain the problem correctly.
Final Cut seems as if it is not indexing the files. Most of the time it won't even show me dates (modified, created, etc...) just dashes. Then if I do what you are describing and try to sort it at all it stays in the same exact order. I can't even sort alphabetically.

Final cut pro x trial dose not exporting

I did using tral version final cut pro x, edit my video on open project and store it on event. i try to go file and export my video, also try share to mac hd, movie, and document location, export it to portable hardrive, all of them coould not open video, could you tell me how eport my finish video, It is trail version cannot be export video file. thank you.

Tom, I am having save issue the other gentleman was. When I click on share it asks me what way I want to save it. So I click on it and tried double clicking and it selects it but then never gives me a button to start the rendering and export. Any hep would be appreciated. Thanks

Final Cut Pro Academic Version Is not fully functional!

Could someone tell me if Final Cut Pro Academic is really functionally? I bought final cut pro academic and it appears that the program color does not work. The viewer in color doesn't work. Apple states that the only difference between academic and the normal version is that the academic version version is a non-upgradable version. But I don't believe this. I believe that you have to buy the standard version to get the full features. Could someone one tell me this is not so.

The academic version is Functionally 100% exactly the same. There are no differences feature wise.
The only difference is you can't use an upgrade with that serial #.

My final cut 10.0.5 will not share.

Similar Messages

Maybe you are looking for