My final cut pro will not update on my iMac, it will update on my Macbook.

my final cut pro will not update on my iMac, it will update on my Macbook. I have OS X Yosemite on both systems, my macbook has final cut pro x version 10.1.4 and my iMac shows no updates available and is on version  10.1.1. I have tried looking in iTunes for the same update that is installed on my macbook under the same iTunes account, but it doesn't show any updates. I tried deleting from my iMac and it won't delete so I can reinstall it. any suggestions?

You need to be logged into the Mac App Store with the same Apple ID in order to see your updates. You speak about iTunes: maybe you meant that just as an expression to refer to your Apple ID, but just in case you didn't: you do NOT use iTunes to download mac software. You use the App Store application, available under the Apple menu.

Similar Messages

  • Final Cut Pro X not updating

    Hey guys!
    So I have Final Cut Pro 10.0.5 and I just realized I am 3 update behind. It's not showing up in my app store that it needs to be updated, but I know it does.
    Is there anyway I can update it without going through the app store?
    Thanks!

    Tom-
    If I recall I bought and installation disk called Final Cut Express. Correct me if I'm wrong but I believe Final Cut Express updated into Final Cut Pro X.

  • HT4589 After Yosemite Final cut pro will not run and says there are no updates available.

    OS X Yosemite caused Final Cut Pro to not run until upgraded.  Says there are no updates available and will not let me install it - says I already have it.
    Boxed in and can't move. Now FCP v 10.1
    OSX v 10.10
    Jim

    FCP (10.1.3) works just fine on 10.10.. try to trash FCP then re install.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • Final Cut Pro does not work with Yosemite. Can it be fixed?

    Final Cut Pro does not work with Yosemite. Can it be fixed?

    Hi Tom, I don't know if you can help me.
    I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message  "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
    HELP.
    Jada.

  • Which version of Final Cut Pro will work with Mac Book 10.75?

    I can not put Final Cut Pro 9 on my Mac Book 10.75 (Lion).
    Which version of Final Cut Pro will run on Mac Book 10.75 (Lion).
    Thanks

    Ok, first, your questions's answers:
    FCS1 had a full version & an upgrade from any version of FCP. You only need the serial # handy when installing FCS upgrade.
    Now FCS2 has TWO upgrade versions: one was for FCS1 ($499), the other was from any version of FCP ($699).
    NOTE: Academic and Not-For-Resale (NFR) versions are not eligible for upgrade.
    http://gizmodo.com/252425/apple-rolls-out-final-cut-studio-2-first-impressions
    Here's something else to consider: with the march away from the PPC as a whole & your upgrade cost to FCS3 is $299, I would be very careful how much you spend for the older copies.
    If FCS1 or 2 is too hard to come by or cost what it did originally (or more), you may want to consider picking up a (used or new) Intel Mac with ATI or Nvidia graphics. even the newest mini might surpise you & get you by until you can afford something else.
    Good luck!

  • Why does my final cut pro is not responding every time I open it????!!!!!!

    why does my final cut pro is not responding every time I open it?

    As you give no background info nobody can possibly guess.
    However, have you tried trashing the preferences?
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

  • I have just downloaded Yosemite but Final Cut Pro will not work can you help

    Hi, I have, two days ago, updated my Mac with OS Yosemite only to find the programme Final Cut Pro no longer works.  Can you explain please
    imac 27" Mid 20l1
    Processor 3.1GHZ intel core i5
    memory 4GB 1333 MHZ DDR3
    Please do not get too technical. Thanks

    Glad you got it going.
    I might suggest reading up on it starting here
    http://www.fcpxbook.com/updates/101/
    as the new version is very different from what you're used to.

  • Final Cut Pro will not open

    I broke it. After I did, I tried to uninstall it, but did not make a difference.
    First I tried Delete User Preferences and could not find Final Cut Pro User Data under the Preferences folder. Now even com.apple.finalcutpro.plist does not exist. This is most likely because the application will not open and get to the point where it would care new User Preferences. After I uninstalled the program the registration page popped up and I re-registered so com.apple.RedFinalCutPro.plist is there, but nothing else.
    So pretty much I open the program. The white box that says final cut pro and has ‘loading’ with words flashing past under it pops up. Then the words stop flashing and the white box disappears. At the same time Final Cut Pro disappears on the loading dock.
    That is all I know. It is really really broken.
    PowerBook G4   Mac OS X (10.3.9)  

    Not sure if this will even remotely help, but I had the same problem.
    I reset my scratch disks, waveform cache, thumbnail cache, and auto save vaults, and it fixed the problem. One of my hard drives came unplugged while I was working. It threw my scratch disks all outta wack. FCP would open then close, like you said. So I shut off one of my hard drives so it would open the box that tells you your scratch disk is missing. Thats when I reset them.
    I'm curious as to how you "broke it" to begin with. Maybe we can better help you if we know.
    Hope you get your problem taken care.

  • My final cut pro will not launch, I keep getting Final Cut Pro quit unexpectedly

    I've done everything to deleting preferences and plug ins to re installing it, someone please help me with this problem

    No luck at all, ive done everything thinkable and this is what i get in my report
    Process:         Final Cut Pro [284]
    Path:            /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCutPro
    Version:         ??? (???)
    Build Info:      FCPApp-906181654~22
    Code Type:       X86 (Native)
    Parent Process:  launchd [78]
    Interval Since Last Report:          53967 sec
    Crashes Since Last Report:           20
    Per-App Interval Since Last Report:  0 sec
    Per-App Crashes Since Last Report:   20
    Date/Time:       2011-06-22 12:40:21.298 -0400
    OS Version:      Mac OS X 10.5.8 (9L31a)
    Report Version:  6
    Anonymous UUID:  FB70EBC0-C946-4694-AE72-9D861D7E5486
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: /Library/Application Support/ProApps/SharedA/Frameworks/ProFX.framework/Versions/A/ProFX
      Referenced from: /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
      Reason: image not found

  • Final cut pro will not open in maverick

    After upgrading to Maverick and the latest version of Final Cut Pro X (10.1) I can't open Final Cut no more. In the dock it says: Application not responding.
    I have a iMac with 3.4 GHz i7/32 GB. Please advise. Thanks.

    Try remove and reinstall FCPX…
    http://support.apple.com/kb/HT5149?viewlocale=en_US&locale=en_US

  • Final Cut Pro X not completing export to blue ray

    Running Final Cut Pro 10.1.2, OS 10.9.4, Macbook pro I7 2.3 ghz, 16gig ram...  I can export a short sequence to blue ray from Final Cut Pro X and it works.  I have a 41 minute video that when I "share" to Blue Ray it will burn about 6-7 minutes of the 41 minutes without any errors.  It completes as if it worked but when you look at the video it is only 6-7 minutes.   A few portions of it are also pixilated, that's not the case when I'm viewing it. 
    Any ideas on the blue ray.  I have an external Pioneer Blue Ray burner which as I said works fine on short videos in Final Cut Pro X.  

    Hello Gary,
    Check out this thread for ideas.
    More than a few users have struck issues since 10.1.2:
                     Blu-Ray burning error after Final Cut Pro 10.1.2 update.            
    Al

  • Moviebox dv w/ final cut pro.. not working!!!

    alright i've had this thing working before when i bought it on my mom's 17 inch powerbook rev c 1.5 gigs of ram back when panther was still out.. and once we upgraded to tiger back in april it hasn't worked. Just to see if it was her system I put it on my new dual core g5 and still same issue. it sees the chipset on the pinnacle moviebox but when i hit play on the vcr (selection is on rca) and then play in final cut pro... no luck. can anyone help me with this?? because pinnacle sure wasn't able to... ugh.

    From:
    http://discussions.apple.com/message.jspa?messageID=1063588&ft=y&#1063588
    CaptM...
    I'm cross posting this to the FCP list because it is directly applicable to FCP as well as FCE. This has been a huge source of frustration to me, and I hope that this post will help a few people avoid that).
    I was just walked through a repair procedure by an Apple Care person, and it fixed my camera recognition problems (I have a Canon XL1 and sometime after installing Tiger, then 10.4.1, various patches (including Quicktime 7.1) and the latest Desktop Video patch, I've been unable to use the camera with Final Cut Express, and attempts to capture would result in a FCE crash).
    The workaround is to download Quicktime manually, after removing the "receipts" which indicate that it is loaded. Specifically, I was told to do the following:
    1. Navigate to Library -> Receipts on your main drive (not from your personal folder).
    2. Remove all files of the form QuickTime*.pkg, where "*" is a version number. E.g. QuickTime600.pkg, QuickTime650.pkg, Quicktime700.pkg and QuickTime701.pkg. This simply tells your system that those packages are not installed.
    3. Go to http://www.apple.com/quicktime/downloads and click on the "download Quicktime" link. DO NOT USE THE AUTOMATIC UPDATE UTILITY. Download QuickTimeInstallerX.dmg. Double click this file (probably on your desktop) and then invoke the installer by double clicking QuickTime701.pkg.
    4. After your computer reboots, you should be able to restart FCE and see your camera.
    I hope this works for you as well as it does for me. The Apple tech said this was the first case he'd seen for FCE, but that over the last couple of days, he'd had success with it for several FCP users.
    Enjoy!

  • Final cut pro x not working,  stuck on " reading file...."

    My final cut pro x. Is not working.  The apple specialist stated that one of my files is corrupted on my hard drive therfore its not loading.  He told me to hide the files and open one if them at a time.  By hiding the files, it does allow the program to open.  The problem is that I have so many files!!!  Can I just go into each of the "original media file" drag them to a hard drive and then erase the final cut events?  By doing this, I can load my program?  I just dont want to loose any of my original media.  I dont mind loosing the projects but just not the clips that I rransferred from my camera.

    Thanks Jakob, I will get a blank hard drive and transfer one of the original media and test to see if I can still view it.  I will let you know the outcome.  Wish me luck Jacob. 

  • IMovie nor Final Cut Pro will import video from camcorder

    Both iMovie 10.0.5 and the Final Cut Pro Trial I just downloaded (to test before purchasing) will not import my movie.  The movie plays on my camcorder and it plays in both iMovie and Final Cut but when I click to import, a message appears in the top right corner that reads:  NO DATA FROM DEVICE.
    Once again, the movie plays on the camera AND plays on the screen.  But there is nothing recorded into an event and no file / data transferred to the computer.
    I searched the support forums and tried a freeware named DEBUT.  It worked but the video playback was very poor, scratchy and blurry.  
    Processor 3.5 GHz  Intel Core i7
    Memory 16 GB 1600 MHz DDR3
    OSX 10.9.5
    Camera Sony DCR-TRV460  (8MM, Digial 8, Hi8 tapes)
    Firewire 4 pin to Firewire 800 cable, into Firewire to Thunderbolt adaptor, into iMac.
    How do I get these old tapes into iMovie or Final Cut for editing?

    I don't think I can help with your Digital 8 directly into iMovie 10.0.5 or FCPX, but try a few work-arounds.
    Try copying iMovie'09 from old to new Mac via a memory stick or external HD. It is only 250 MB.
    This still may not work on the new Mac as it may be an issue with Digital 8/Mavericks combination. Any way if you can get iMovie 09 onto new Mac ,give it a try.
    OR
    Buy an external HD and transfer some data onto this to free up some space on your MacBook.
    Then use your MacBook /iMovie 09 to import to Events onto your external HD.
    Connect external HD to new Mac and import the  DV files in Media of iMovie 09 into FCPX.
    A word of caution!
    When the files are imported into FCPX from the Media in iMovie 09 check to see if files are copied or just referenced.
    If they are copied then you can delete them from iMovie 09, if they are referenced then you must not delete from 09.
    You can normally tell: if copied then it takes a while to transfer,If referenced then done almost immediately.
    My guess is ,they will be copied, but check.
    The above is a bit messy but may get you moving with your new Mac.
    Buying a new Mac is an expensive way of overcoming an overloaded HD on the MacBook. Cheaper to buy an external HD.
    This may be useful;
    How can i move or copy projects and events to an external drive? (Version 9 and earlier)
    Someone may be able to suggest a fix for Digital 8 into FCPX directly.

Maybe you are looking for