My Final Cut Pro X doesn't run. An Izotope window pops up and fcp crashes

Hello,
i installed a trial version of Izotope RX2 but now Final Cut does not open. A authorization window from Izotope pops up when i open FCP and it crashes. I can't press any button (Authorization or Continue) of that window and FCP crashes, i always have to force quit.
I have already cleared Izotope but the plug-ins of Izotope still appear on my Reaper (audio software).
Did this ever happened with anybody? Or just somebody knows anything that could help?
Thanks for the attention
jmmiranda

I'm guessing you have an izotope audio unit plugin still installed on your mac that's causing problems.
Trying finding it and removing it temporarily from here:
Library > Audio > Plug-ins > Components

Similar Messages

Can Final Cut Pro 5.0.4 run on MAC OS X TowerVersion 10.5.8Processor: Dual 2.7 GHz PowerPC G5Memory: 6 GB

My questions is simply...
Can Final Cut Pro 5.0.4 run on MAC OS X TowerVersion 10.5.8Processor: Dual 2.7 GHz PowerPC G5Memory: 6 GB??
and how do I found out if it is intel based?
I am trying to sell my mac and there are people asking me very complex questions.

A G5 is a PPC processor, NOT Intel.
Final Cut Pro 5 will run on a Power Mac G5.
Yes, your tower will run it.
http://support.apple.com/kb/TA23208?viewlocale=en_US

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

There is this offer of a trial version FC Pro X with 30 day runtime:
http://www.apple.com/final-cut-pro/trial/
Too bad you didn't have a complete backup that could run the previous OS X
and then you could resume using an earlier Final Cut Pro (10) or (7) since a
clone would have been a means toward that position.
http://www.apple.com/support/finalcutpro/
http://www.apple.com/support/pro-apps/
This appears to be another good reason to check out all the reasons why one
would want or need to upgrade a working OS X version, since these kinds of
events are known to happen as a direct result.
Sorry to not have an answer to this, other than try & use the Trial version...
Or see if someone at Apple sales/support can field your issue w/ an answer.
Good luck & happy computing!

I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

EExactly what settings are you using. Some go to iTunes.

Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

Hi Cereskit
Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
Vicki

I am trying to import scanned illustrations into Final Cut Pro (6) as layered photoshop images, however when I try and animate the image is blurred.....please help!

I am trying to import scanned illustrations into Final Cut Pro (6) as layered photoshop images, however when I try and animate the image is blurred.....please help! Will I need to create the photoshop files as a certain size/resolution? I am working to 4:3.....

You should take your question to the Final Cut Studio forum. This is FCPX.

I just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it, i just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it

Ii just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it, i just purchased Final Cut Pro X i accidentally pressed paused when it was downloading and now I can't find it

You should see it in your Purchases page of the App Store.

I have purchased and installed acrobat XI pro. When I run it a window pops up saying the the serial number I have provided is valid but a qualifying product cannot be found on the computer

I have purchased and installed acrobat XI pro. When I run it a window pops up saying the the serial number I have provided is valid but a qualifying product cannot be found on the computer

YOu have purchased or been sold an upgrade from Acrobat 9 or 10. You simply need to prove you own that old version using its serial number. be sure to keep both serials forever.

Can the first version of Final Cut Pro X (10.0) run on Mavericks?

I purchased Final Cut Pro a while ago when it was first new, but I had been locked out of that account, so I couldn't update it. My question to you is can I run Final Cut Pro X 10.0 on Mavericks?

Delete Final Cut Pro X completely by using Final Cut Remover from here: Digital Rebellion
empty trash
Log into Mac App Store and Install FCP X, the latest version will be installed

Final Cut Pro Trial doesn't import correctly from iMovie

I am trying the trial version of Final Cut Pro.
I am trying to import iMovie Projects into Final Cut Pro.
When I do so, no clips import (they are all still photos) and sometimes the sound imports and sometimes it doesn't.
Is this just because it is a trial version? Does this work normally in Final Cut Pro?
My end goal is to create a DVD.

They are all in a folder on my Mac.
What fodler? Are they in iMovie Events?
aren't the free tracks in iMovie/Gargage Band/etc, free of copyright?
Yes, but FCP won't link to them if they're not in events.
You should finish these projects in iMovie.

Final Cut Pro X doesn't seem to recognize 120 fps

I hust bought a GoPro Hero 2 with the capability of shooting 120fps. When I upload the clip into my timeline it says that it can't recognize the format and prompts to 60 fps. Any thoughts on how to get the full 120 fps? Thanks

Here is the link.
http://gopro.com/3d-cineform-studio-software-download/
But Tim Wolsky is correct. If you set your project at 29.97 before you start editing the project and then drag the clips in, they will conform to 29.97 and be able to slow down. I also like it in Final Cut becasue it is preset to ramp up and down into slow motion. Meaning, if you only want part of your clip in slomo, you select the Range tool, highlight that section and slow it down. Final Cut has an algarithm that does a slight ramp down to slow mo, so it isn't jarring. Very cool.
The gopro software will allow you to slow it down to the appropriate frame rate then export it as the longer, full slow motion clip. It's more exact than final cut, becasue it doesn't work in percentage, but you do lose flexibilty.
I shot some footage the day I got the camera and slowed it down in Final Cut. I will upload and post it to the thread, if you are curious on the end result. It's just grainy, becasue it was dark and indoors, but you will get an idea of the smoothness of the effect.
Hope this helps.

Syncing audio in Final Cut Pro X doesn't create a compound clip

I just had a quick question that hopefully someone can help me with. I was shooting some video with my Canon t3i the other day, and I record audio into a Zoom H1. I imported all of my audio and video into Final Cut Pro X and I wanted to syncronize the clips, so I chose the video and the correct audio to go with it, and I right clicked them, and chose syncronize clips.
Now, my question. On every example I've seen of this, syncronizing two clips creates a compound clip which would be great, but when I choose syncronize clip, it just creates a new clip of the video with both audio files apart of the video. It's not a compound clip at all, it's just a video file with two audio channels, one with the cameras audio, the other with the Zoom H1 audio. When I go to shut off the cameras audio channel and just leave the Zoom H1 audio, my video starts to skip and just goes black, yet the audio plays fine...
I guess I'm just looking for help, is there something wrong that I am doing when I am trying to sync these clips? Are there certain file settings that I should have? My video is recorded in 1080p with 24fps, the audio is recorded in WAV format. Any help would be greatly appreciated, thank you.

After opening in TL and expanding sudio components.

Final cut pro 7 viewer video running slow (Strobing)

Hey,
Im having a problem with my Final cut Pro 7. Just all of a sudden my video viewer footage when I play it back has been strobing.
Help please?

Does this happen with all the clips you load to the viewer or just some?
Click on a clip (that is strobing) in the FCP browser to select it, and once selected, type Command + 9 to see the item properties for that clip.
Either report those properties here or take a screen shot of the item properties for the clip and post that here.
MtD

Final Cut Pro X project timeline vanished from project window.

I'm using Final Cut Pro X on my Intel based iMac running Snow Leopard. I was trimming a video file in the project timeline when the timeline vanished. The project window is there but the timeline is gone in all projects. Any ideas?

Same thing just happened to me, I can preveiw the project still, and no it is not a matter of zooming out. There is no enter full screen option in snow leapord. This is a huge issue and needs to be addressed ASAP!
The affected project is the music video, you can see that it is completely grey.
This is what it looks like when you open the project, no timeline. Just a grey area.

My final cut pro x doesn´t work

when I open my program gets stuck while loading, I am very concerned that the work week and the machine is there mark error. No work force to close the program and send a report if nothing happens ..

If Al's suggestion doesn't work try this . . . .
Corrupt preferences can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be one of the first things you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.

My Final Cut Pro X doesn't run. An Izotope window pops up and fcp crashes

Similar Messages

Maybe you are looking for