My Final cut pro x is not letting me share my files

I keep trying to export my files and the only that i ave figured out how to do it is to share on my default file so that i can have a accessable file so i can upload it to youtube , or directly share to youtube . it wont convert i always get an error message
it says "The operation could not be completed because an error occurred when creating frame 7439 (error -1)."

You are using a version prior to 10.1. The 10.0.8 version in particular had export failure tendencies.
Sometimes they were caused by corrupted clips and just as often by bad renders – even though he error message didn't differentiate.
The delete (or replace) clip solution that Ian Brown suggested is worth trying. An alternative way to locate the reported frame position is to go to Preferences and change Time Display to Frames.
If deleting (or replacing) the clip at that frame location leaves you still unable to share, then turn off background rendering select your project in the Project Library and then from the File menu, Delete Project Render Files (choosing All); do a similar exercise to get rid of event render files. Without rendering, see if you can now export.
Russ

Similar Messages

  • Final Cut Pro X will not let me buy it saying I don't have the right video card?

    Get this message but not advice on what I need to get, "Your computer’s video card does not meet the minimum system requirements."
    I have a Mac Pro 2008, with all the memory it can handle and it says under graphics:  Graphics  ATI Radeon HD 2600 XT 256 MB
    Any advice?
    Thanks!

    This is the list fo supported graphics cards:
    NVIDIA
    GeForce 320M
    GeForce GT 330M
    GeForce 9400M
    GeForce 9600M GT
    GeForce 8600M GT 128MB (Note: OpenCL compatible, but does not meet system requirements for Final Cut Pro X, Motion 5 and Compressor 4.)
    GeForce 8600M GT 256MB
    GeForce 8600M GT 512MB
    GeForce GT 120
    GeForce GT 130
    GeForce GTX 285
    GeForce 8800 GT
    GeForce 8800 GS
    Quadro FX 4800
    Quadro FX5600
    ATI
    Radeon HD 4670
    Radeon HD 4850
    Radeon HD 4870
    Radeon HD 5670
    Radeon HD 5750
    Radeon HD 5770
    Radeon HD 5870
    AMD
    Radeon HD 6750M
    Radeon HD 6630M
    Radeon HD 6770M
    Radeon HD 6970M

  • My Final Cut pro x will not let me do 1 frame stills

    I am working with a Time lapse and final cut x will not let me make the duration any shorter than 2 seconds. How do I over ride?

    The selection duration can be made very small, but of course it's very difficult to deal with a one frame selection. Usually the best thing is to convert the image sequence to video before bringing it into FCP, or you can put all the items in the timeline, select them, and set the duration to one or two frames.

  • I cannot download final cut pro, it is not letting me buy it

    I can't buy it and I don't know why? It just kicks me out, plus a tech told me today that support was 24/7 yet I cannot get it at this hour???

    Hello AllyFlins,
    The following article has some good information and useful tips that can help get the App Store to behave again.
    Troubleshooting the Mac App Store
    http://support.apple.com/kb/TS3624
    Also, if I may offer my apologies for any misunderstandigs that may have occurred when you called us. Our Professional Video Support folks are staffed 24/7.
    What you get
    With this product, one authorized contact can telephone or email the Apple Professional Video Technical Support team for one full year. Apple’s support team is on call 12 hours a day, 7 days a week.2 Here’s what’s included:1
    AppleCare Professional Video Support
    http://www.apple.com/support/products/enterprise/video.html
    Cheers,
    Allen

  • Final Cut Pro X isn't letting me transcode my files to Proxy?

    I keep getting pop-up messages telling me to transcode to proxy, but it wont let me. How can I transcode these clips to proxy? Thanks!

    Du[licate post.

  • Final cut pro x dissolves not working

    Final Cut Pro X,  dissolves not working, When I use Ribbon, Heart ect, they showup on the video flickering, will not allow me to render the video, any help would be greatly appreciated.

    Sorry. That should be what's the media? What are the project properties?

  • Send to - Final Cut Pro XML data not seeing my Color render

    Sup folks,
    As always I did some lurking on these boards and consulted the manual about this issue.
    Nada.
    I've rendered my shots. They were all queued. They were all rendered.
    When I use the Send to -> Final Cut Pro command I get the "not all your clips were rendered" warning. I click yes to see what I will get.
    FCP imports the XML data and I get nothing. All of the clips in my FCP timeline generated through the Send to -> Final Cut Pro command are all of my original media prior to my color workflow. Not my graded Color renders.
    I did move my renders from a local drive to an external because of data capacity. After doing so I did update my Media, Render and Project paths to the new location of my media.
    I thought that would fix my problem. It didnt.
    So again: my issue is that even with my shots all rendered correctly (i checked them in QT) the XML being sent to FCP through the Send to -> Final Cut Pro command is not hooking up with my renders.
    Deadline tomorrow.
    As always,thanks for your time

    I did move my renders from a local drive to an external because of data capacity. After doing so I did >update my Media, Render and Project paths to the new location of my media.
    If I'm following the sequence correctly, you rendered your material to a local drive. Then you moved it, changed the paths (in COLOR), and then tried to "Send to... FCP". Is this correct? If so, doomed to failure. In your case, you may have even moved an empty folder.
    There is an ironclad and non-negotiable series of events in rendering and initiating the roundtrip. Many users regard this as a "bug". One of the first things that a user should always do is set up all the target paths before even doing the first grade. But it is essential that the target render path be set up PRIOR to loading the Render Queue. COLOR creates the receiving folder at that time, and that is where the media will go no matter what you do after the RenderQueue is loaded. Change the path, change the format... change whatever you want... the deal has been done, and all will be ignored. However, once the media is rendered and you choose Send To... FCP, then the original XML that FCP sent will be modified by COLOR and passed back to Final Cut. COLOR does NOT,repeat, NOT generate EDLs, XMLs, or any of that stuff. It only modifies original lists. That you modified the Media, Render and Project paths (probably only in the User Preferences tab) is meaningless once the project has been rendered. The Render path for this individual project is determined in the Project Settings pane, along with the render dimensions and format. However, COLOR will observe a path change AFTER the render, and edits the XML re-export to try to find the media in the newly named directory. Of course, your media is actually elsewhere, and you get a blank sequence.
    Lastly, make sure that you SAVE the project after renders, to retain the "rendered" clip status -- or COLOR won't remember any of this.
    jPo

  • Final cut pro HD 2 not working with new updates

    recently purchased a new imac. Most of my old programs were not supported. I updated to 10.9 from 10.5. Now, all the programs are running except Final Cut pro HD 2. I get a message sayin"power pc applications are no longer supported" Any suggestions? I read in an old discussion (from 2011) that I might need to download Rosetta?

    MichelPM wrote:
    ... or you maybe able to run your version of Final Cut under virtualization software.
    I do not know which version of FCP the OP is using as I do not recognize his designation of Final Cut Pro HD 2.
    However, last weekend I attempted to install Final Cut Studio 2 (Final Cut Pro 6) into Snow Leopard installed in Parallels, as a test.  It failed!
    Final Cut's installer suggested the following problems: not enough VRAM - 64 needed; 0 present (even though Parallels is set for more than the minimum required VRAM); and a missing video card.
    I attempted to work around this problem by using Pacifist to install FCS2, which worked, as far as the installation was completed.  However, when I attemped to run FCS2, a dialog box came up with indicated that same two problems and then it quit.

  • Final Cut Pro 2nd monitor not working properly?

    Been here before a long time ago, can't remember how it was resolved.
    Working in a new edit suite, FCP Studio.  Two new Samsung monitors (not my choice).  I want one to be my playback monitor.
    I set:
    Final Cut Pro > Audio/Video Settings
    > Digital Cinema Desktop Full Screen
    > View > External Video > All Frames
    But all I'm getting is a black frame on the 2nd monitor.
    They've also got one of those very flat alluminum keyboards ... where F12 becomes a sound control.  I'd love to know how I can change the function key to work as an FCP action / 2nd monitor toggling on and off.
    That's two questions.  Would be most appreciative of an answer for either.
    Ben

    Hey Andy,
    I did the first half of your suggestion, but not the second half.  Heading down to the studio this morning ... set up in a tiny white chapel looking out across the silvery North Atlantic ... and will try the second half of your suggestion.  Will also see if there are two graphics cards installed in the Mac Pro.  Will also check out the Window > Arrange in FCP (something I should have checked first off).
    I talked to a filmmaker who previously worked on the system, only to discover he never uses the second monitor as a full screen, but rather as a large 'bin'.  Interesting.
    If worse comes to worse and I can't solve it I suspect I could size the canvas window to super large and drag it over to the second monitor.
    Will post back when I've tried the latest suggestions ...
    Thanks you mucho guys,
    Ben

  • Final Cut Pro Video Playback not in Widescreen for Anamorphic Material

    I have a Panasonic DVX-100B hooked up to my computer and am running Final Cut Pro. I shot everything in the anamorphic squeeze mode. When I play this material back through my camera (which displays the material as widescreen because I forced it on the camera menu) it doesn't playback on the TV in widescreen, it stretches it back out vertically. Is there a setting in Final Cut that will send the signal as a 16:9 signal to the TV, so that it will understand it correctly?

    baadayakazi wrote:
    Is there a setting in Final Cut that will send the signal as a 16:9 signal to the TV, so that it will understand it correctly?
    No, FCP does not send out an anamorphic flag via firewire. What I mean is, it sends out the video to your deck simply as 720x480, without telling the deck (and therefore the monitor, as well) if that is supposed to be a 16:9 or 4:3 image. In order to monitor with the correct ratio, you'll need to have a monitor that can correct for aspect ratio.
    If you're working on a pro monitor, it should have a 16:9 button (or menu setting, at least). Some recent - as in the last 4-5 years - consumers TVs also have an anamorphic squeeze feature that will compress the image vertically. If you've got a 16:9 TV, you'll need to use the stretch feature (of all things) to correct your preview image.
    All that said, I'm guessing you fall into the last camp: you're previewing out to a consumer TV that cannot do vertical compression? If so, your only alternative is to nest your anamorphic sequence in a 4:3 one for preview purposes. Of course, this is needlessly cumbersome (and you run into the dreaded issues with nests failing to update every now-and-then) and requires more CPU horsepower. Either that or edit with the distorted image...
    Or are you in a whole 'nother situation?

  • Updated Final Cut Pro X won't let me open old projects

    Final Cut Pro X wasn't launching, so I updated it to the latest version. Now it's opening, but it won't let me open my old projects, and when I try to update my old projects to the new version, the app crashes. What do I do?

    Final Cut Pro X wasn't launching, so I updated it to the latest version. Now it's opening, but it won't let me open my old projects, and when I try to update my old projects to the new version, the app crashes. What do I do?

  • Final Cut Pro X will not export my project - error 1

    Hello everyone,
    So Final Cut is giving me a hard time. I have a project about 15mins long that I would like to export as a master file and it just doesn't want to work. When I first finished and tried to export, I was using verison 10.0.8. I would select master file for the export and it would just sit there, stuck on 0%. I then realized that I needed to update. I updated to 10.0.9 and tried to do the same thing again - no luck. Next, I closed final cut and trashed preferences. I then opened up and tried exporting again, same thing happened, stuck on 0%. Then I closed again and trashed preferences again. I opened final cut, turned off background rendering, and trashed project render files and event render files (as was suggested in another discussion for export problems). After doing that, I again tried to export - still nothing. At this point of course, I had trashed the render files, so I figured I should just let the project render again. I turned background rendering back on and opened my project - now it would not render! It was stuck on 0%! Okay so I closed and reopened again. I first tried to copy my whole project into a new project and try letting it render that way - nope, didn't work. So I closed and opened again. I turned off background rendering and started a new project. I pasted just a section of my video into the new project and manually rendered that section, which worked. So I pasted the rest of the video (in chunks) into the new project, manually rendering chunk by chunk. Finally I had my whole project again, and the whole thing was rendered. I tried exporting again and got the error 1 message, "The operation could not be completed because an error occurred when creating frame 373 (error -1).". This is my current state of affairs, and its driving me crazy. I just want to export my project!
    Please help....Thanks

    Thank you. I found it now. This is a location where I did not expect this. I tried to do this using the GUI elements controlling how clips are displayed in the time line. I also was looking for a context menu item on the clip. I did not expect it in the preferences.

  • Final Cut Pro Trial won't let me export

    So I got the Final Cut pro Trial about 2 weeks ago and I was able to export 3 videos just fine. Now all of a sudden I just finished my 4th video, added commentary and everything else and it won't export. I don't see anything wrong with the project except for some reason the cross dissolve transitions won't render. Nothing is going on in the background, I've tried closing out the program, restarting my computer, nothing helps. I can export any other projections too. For some reason I click file, share, master file and nothing happens. I'm able to click it, but once I click it, nothing happen, where as before the export settings pop up. I always tried using the export option on the right, and the same thing happens. I checked and all the files are working fine, so it's not like any clips are missing. Can anyone help? Thanks

    Could you post a screen shot of the project libary and the toolbar?
    Reinstalling the app doesn't effect the events or projects. Sounds like some weird permissions problem.

  • Final Cut Pro 7 will not open

    When I try to startup Final Cut Pro 7 a prompt says a specific auto save vault is missing. This folder does not exist. Does not allow program to open. Help

    Try trashing preferences with http://www.digitalrebellion.com/prefman/

  • Ilife Sound Effects and Final Cut Pro Sounds are not appearing in Final Cut Pro X anymore!?

    Hello,
    I am new to the app Final Cut Pro X. And recently when I have gone into the Music and Sound Folder in final cut pro the option for Ilife Sound Effects and FCPX Sound Effects do not appear. I have read other forums and they have said to drag the sound files into FCPX but that isn't even a option. It onlt has iTunes options, please reply back someone this is stressing me out. I don't know if it is because of Mavericks or whatever but it is driving me insane and I need help!
    This is what it looks like .

    This is a known issue in FCP X 10.1 and you will find many posts about it in the forum just do a search. Several solutions have worked for different users. Try the following:
    1. Open and close GarageBand then relaunch FCP
    2. Open and close iPhoto then relaunch FCP
    3. Close and reopen FCP
    4. Trash FCP preferences then relaunch FCP
    Any one of these may work. Just try them in any order. Be aware the problem may recur.

Maybe you are looking for