My final cut shot down when rending, can anyone help?

Process:         Final Cut Pro [492]
Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCutPro
Version:         6.0.5 (6.0.5)
Build Info:      FCPApp-810171515~36
Code Type:       X86 (Native)
Parent Process: launchd [167]
PlugIn Path:       /Users/lamawood/Library/Frameworks/ProMedia.framework/Versions/A/ProMedia
PlugIn Identifier: ProMedia
PlugIn Version:    ??? (???)
Date/Time:       2011-08-08 02:19:13.734 +0200
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          78953 sec
Crashes Since Last Report:           33
Per-App Interval Since Last Report: 10654 sec
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      2817CA08-9B3E-46F1-99AB-56DC8D88FF81
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   ProMedia                      0x268a8e53 GI_GetFrame(PMFormatDescription const&, PCURL const&, unsigned int, PMFrameRequest const&, PCBitmap*, void*) + 341
1   ProMedia                      0x268a6862 PMClip::getFrame(PCTimeValue const&, PCTimeValue const&, PMFrameRequest const&, PCBitmap*) + 368
2   com.apple.ozone.framework     0x35884e36 OZFootage::loadBitmap(OZRenderParams&, PMFrameRequest const&, PMLayerDescription const&, PCTimeValue const&, PCTimeValue const&, bool) + 4504
3   com.apple.ozone.framework     0x358858d9 OZFootage::getCachedBitmap(OZRenderParams&, PMFrameRequest const&, PMLayerDescription const&, PCTimeValue const&, PCTimeValue const&, PCHash128 const&, bool) + 897
4   com.apple.ozone.framework     0x35893e45 OZFootage::getBitmap(OZRenderParams&,

Correction: this is the Final Cut Studio forum...
laminfromoslo,
Although there are probably several people who can decypher the error log info you posted, I'm not one of them...
First, I always repair permissions if something in FCS starts acting up. Then I'd dig into the Autosave Vault and pull out the latest version of the project available and restart it to see if the crash was a fluke or if something is broken. From there, the questions become clearer and the answers are easier.

Similar Messages

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

Download it directly from Apple and apply;
Digital Camera RAW Compatibility 6.02

Final Cut shuts down when I try to stop logging and capturing

Ok, so I know whoever answers will need more technical specifics but for now this is the deal. I have been trying to import footage from a DV camera into final cut and once I try and stop the camera or when I press 'esc' final cut unexpectedly shuts down. Any idea what's wrong? Thanks!

Computer is a Macbook Pro, Version 10.4.11. Drive is a G-Tech - G-Drive 500 GB and I use a Firewire 400 when I connect it to my computer though I import straight into the computer from the camera with a firewire. Camera is a Panasonic AG-DVX100. I have Quicktime 7.6.4. My Final Cut Pro is 6.0.5. My capture preset is DV NTSC 48kHz. Device control preset is Firewire NTSC. Vid rate is 24fps, compressor info is DV/DVCPRO - NTSC and Data Rate is 2.9 MB/sec Not sure if I've given you enough information. I also have a report from when it crashed if it helps any. Thank you.

Whilst editing, final cut pro 7 suddenly quits, can anybody help?

Hi, Whilst I am editing pro resNT footage on my copy of Final cut pro 7, the program suddenly quits, and i have to constantly re open and carry on!!! Can any one advise me as to how to cure this problem ?

Thanks for the advise Todd, my original footage was shot on AVCHD, which as you know is MTS codec, this was converted into MP4, and stored on a 1 TB hard drive, but it was connected to my Mac with a USB connection. The MP4 footage made FCP perform irratically, so I was advised to convert to Pro res NT, which i have done, FCP now runs perfectly, but now I don't use the hard drive. Could I use the hard drive, regardless of it not having a Firewire connection.

I have just downloaded Yosemite but Final Cut Pro will not work can you help

Hi, I have, two days ago, updated my Mac with OS Yosemite only to find the programme Final Cut Pro no longer works. Can you explain please
imac 27" Mid 20l1
Processor 3.1GHZ intel core i5
memory 4GB 1333 MHZ DDR3
Please do not get too technical. Thanks

Glad you got it going.
I might suggest reading up on it starting here
http://www.fcpxbook.com/updates/101/
as the new version is very different from what you're used to.

My mac wont shut down or restart, can anyone help?

Hi,
I am trying to shut down or restart my macbook pro but neither work!
Can anyone advise?
Thnx

I'm having the same problem. Are you connecting to a Windows VPN or File share?

When I try to open up camera raw it shuts down Adobe Bridge, can anyone help?

I am using mac. My problem at first was that when I tried to open a RAW image it would just shut down either photoshop cs4 or bridge cs4. Then I installed that Camera Raw 5.2 update, now I can open a raw image if I double click it from my desktop. But once I am in bridge and try to open a raw image, it loads for a few seconds and shuts down bridge. Is there a way to fix this?
Even when I when I try to change the camera raw preferences in bridge (File > camera raw preferences) that also shuts down bridge.

Go to photoshop, and check , in the Photoshop menu>about plug-ins
What version of camera raw do you see?
There should only be one camera raw plug-in installed at the default location (check the read-me or the FAQ of this forum)

My iBook is also shutting down randomly. Can anyone help?

Hello!
So I appear to be in the same boat as many of the folks on this board. My iBook (bought new in June 1996 - I am still on the original battery) will shut down after a few minutes if I don't have it plugged in even though the battery does not show any signs of being drained.
So here are some details:
• Shut down happens when the adapter is unplugged. Has never happened when plugged in.
• When plugged in to the adapter the battery charge level (listed as a percentage in the gray bar in upper right corner of screen next to an American flag and the time) never gets above 98% no matter how long it is plugged in.
• Even though the charge level says 98% the tip of my barrel plug for the adapter is green not the amber color when it has a low charge.
• The details listed in "About This Mac" for battery are:
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 2476
Remaining Capacity (mAh): 2430
Amperage (mA): 0
Voltage (mV): 16301
Cycle Count: 287
I tried resetting the PRAM and as far as I can tell it did not do anything - it definitely didn't solve the problem.
So yes, it would mean the world to me if someone could help me out. I really need a computer that I can trust on the go for work this weekend and am in no position to buy a whole new laptop. So yeah, any help or advice would be amazing!
Thank you!!
Ryan

AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Dynamic Power Step: No
Reduce Processor Speed: No
Automatic Restart On Power Loss: Yes
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 180
Dynamic Power Step: No
Reduce Processor Speed: No
Automatic Restart On Power Loss: Yes
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 1437
Remaining Capacity (mAh): 1436
Amperage (mA): 0
Voltage (mV): 16607
Cycle Count: 559
AC Charger Information:
AC Charger (Watts): 50
Connected: No
Charging: No
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
Thanks Richard!
The plastic part and screw twisted off. I can push the tab in with a screwdriver to latch it. I have the screw and battery taped and it seems to stay in place, but I should get it fixed. Just saving up the money for it.
I am now trying the battery and let it drain and recharge, as I have neglected to do that lately.
Thanks for answering!
Sandy
p.s it just dumped me at 53% capacity when I restarted. I came back to session where I was dropped and continued typing.
Thanks for the info and suggestions! I know I need to get some stuff done on this thing soon!

IMac randomly shuts down.. Can anyone help?

My 5 year old iMac has decideded to randomly die on me..
I was using it the other day when it all of a sudden lost power and shut down, every time I tried to re-boot it I could hear the fan/it trying to come on but nothing happened.
I have left it for a few days and come back to it tonight, it switched on fine for a few minutes then same thing again.
Now I can't get it to stay on for more than about 30 seconds (and not enough time to get the file off it that I desperately need!)
Research on the web seems to point to anything from overheating (again I can't keep it on long enough to check the utilities for this, although it doesn't seem very hot!), logic board to power supply to virus'.
Has anyone had this problem and resolved it or can suggest anything I can do? I've tried leaving it off and unplugging it. Tried unplugging all the stuff from it (printers etc) I can't get a genius appointment until next week and need to get a file off it for a presentation tomorrow!
Any help appreciated!

This could be due to an issue with the System Managment Controller. What you should do is try to reset the SMC. This will help reset the power flow of the computer back to the factory defaults in case something became corrupted throughout general usage. (Steps Below)
There could also be environmental variables that caused it, even a power surge that could have cooked something internally. Some power surges you may not even notice because they can be small, but just enough to damage a component. Do you use a surge protection power strip?
SMC Reset on iMac: ( http://support.apple.com/kb/ht3964 )
1- Unplug the power cord from the back of the computer.
2- Wait 15 seconds.
3- Plug the Power Cord back in
4- Wait 5 seconds.
5- Boot the computer.
Let it run for a bit (if possible) and see how long it will stay on.
If doing the SMC reset does not do the trick, then the problem will most likely be due to a Logic Board error and will unfortunately need to be diagnosed at the Genius bar.
Good luck MissLKMorgan! Let us know what happens.
- Captain

Trouble shutting down my computer. can anyone help?

i recently changed my screen to a LG/TV monitor and when i shutdown the computer, after few second it restarts by its self. I cannot longer shut it down as the cycle continues.
do i have to change the setting or i need to update my software?

Have you added any USB devices or connections along with the new monitor?
You can also try resetting the PRAM
http://support.apple.com/kb/HT1379
and resetting the SMU/PMU (power management)
http://support.apple.com/kb/HT1436 <- later models
<a class="jive-link-external-small" href="http://">http://support.apple.com/kb/HT1939 <- earlier models

My mail application is canceling my shut down request. Can anyone help?

When I try to shutdown or restart my Macbook I receive a message saying that the mail application has canceled my request. This is despite me having already quit the mail application. After I receive this message the mail application starts up again. I have tried using "force quit" to fully quit the mail application, but get the same result. I haven't been able to shut down my Macbook for a couple of days. Has anyone any idea of what's happening?

Tomfromblackrock, if you're Activity Monitor does not indicate that Mail is "Not Responding" then I suggest you hold down the power button on your machine until it powers down. I have had this problem, too and that is the only way I have been able to shut down.
My email account was hacked into and shut down by my provider until I changed my password. Ever since I have not been able to close Mail or shut down my machine. Also, when I do this extreme shutdown I have found that Mail automatically launches upon restart. I do not have it designated to do so. I would love to know if your Mail program does the same thing. Good luck.

Just did an update on my mac book pro with microsoft messenger and now i seem to have two programs on my dock thing can anyone help me please

hello I am new to all this I just purchases a mac book pro, and i did an update tonight and now i seem to have 2 microsoft messengers on my dock thing down the bottom can anyone help e out please

Complete directions can be found in this article: http://guides.macrumors.com/Uninstalling_Applications_in_Mac_OS_X

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

When i open final cut pro x when it starts loding the projects it shows the spining beach ball and is stuck wat can i do?

when i open final cut pro x when it starts loding the projects it shows the spining beach ball and is stuck wat can i do?

Possible corrupted project or media fies. Here's what I'd suggest.
First trash preferences. If that doesn't work…
Move your Final Cut Projects folder into a folder named Hidden Folder. See if FCP then launches. If it doesn't hide your Final Cut Events folder. Once FCP launches successfuly, create a test event and project.
To track down the problem, successively move load events and projects from hideen to their proper location and open FCP. When and if you get the crash you have hopefully located the problem.
The easiest way to do this is to purchace Event Manager X ($5).
Good luck.
Russ

My final cut shot down when rending, can anyone help?

Similar Messages

Maybe you are looking for