My fingerprint reader is not recognized by DigitalPersona when I upgraded to Windows 7

My fingerprint reader worked with Vista but when I upgraded to Windows 7 it is not recognized by DigitalPersona.
I have a dv3-1075us with the AMD Turion X2 dual core mobile RM-72 2.10 Ghz processor. I have updated the BIOS to F.15, there is not a biometrics option in the BIOS for me to turn on, Authentec Driver 20.0.18 dated 11-24-2009 (Device Manger does nto show an error), and running Digital Persona Personal version 4.11.3826.
I have updated this from the troubleshooting section of the HP Support website.
At the windows login I get a "Reader not detected" message and in DigitalPersona "The fingerprint reader is not connected. Connect the reader."
What further steps can I do to get my fingerprint reader working?
Thank you for your help.

I've got an HDX9350 that I originally ran on Vista, and later upgraded to 32-bit Windows 7 Ultimate. I managed to make most functionality run on that installation, albeit buggy and slow, running assorted drivers in compatibility mode.
Earlier this week I installed the 64-bit version od Windows 7 Ultimate, because the upgraded installation did run into problems sometimes, requiring a long time to get an ip address etc. I was surprised to see a lot of drivers being automatically installed, includingdrivers for the AuthenTec 2501A fingerprint sensor.
I stumbled upon AuthenTecs own basic software, allowing You to log onto the computer and that worked. Or was it Window' own? Never mind.
Installing Digital persona resulted in no reader detected all of the time, despite following instructions on this forum.
Installing HP's SimplePass, things worked straight away! Maybe Digital Persona isn't compatible with Windows 7, or with my HDX9350?
A

Similar Messages

My HP Probook 450 G0 fingerprint reader is not working WIndows 7

Hello,
I am trying to enable my HP Probook 450 G0 fingerprint reader.... I tried many driver version of validity sensor... and finally i have currently installed the driver and software that are mentioned in following link....
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/DV4-1240br-FingerPrint-Driver-f...
Both are them working fine (**without any error) But DigitalPersona is showing me the following message on welcome screen.... "The FingerPrint reader is not connected.Connect the reader"....
OS : Windows 7 Professional
What do you say.....is there any compatibiltiy issue or any hardware issue....or if there any driver mismatch, can someone suggest me the supported driver version....
Thanks in Advance

I have the same problem as the original poster, and followed the download link you provided only to encounter the exact same issue. I am using Windows 7 and bought this machine two days ago. I don't understand why this singular process is this problematic. I really miss my ASUS K53E and it's face logon feature.
Perhaps HP should take lessons unless they have something better than this "fingerprint reader." The only consistent feature I am detecting is its inconsistancy. Oh well, I just won't bother using it, or put a sticker over the thing.
If I have to spend more than an hour troubleshooting a feature of medium to low importance then it was a mistake to purchase the machine (but it was a gift sadly), and it was a mistake to implement the feature and release it without making sure it works. Pretty weak HP, but not as bad as Toshiba or Gateway/Acer at least--not that it says much.
Anyone have a legit fix for this annoying issue? Or some third party facial recognition login program instead?

"CRITICAL PROCESS DIED" and "FINGERPRINT READER IS NOT CONNECTED.

the two issues are as follows;When I try to use my fingerprint reader (after upgrading to win 10) I get the message that the "FINGERPRINT READER IS NOT CONNECTED". How does one get it to connect? When I try to reinstall any software that requires a (RE-START OR BOOT) with HP Recovery Manager, it gives me the new blue screen that says, CRITICAL PROCESS DIED. Please assist. Jon

It is possible to work-around the issue, but some manual steps are needed:
1. delete "smihlp.sys" from "c:\program files\thinkvantage fingerprint software"
2. run "services.msc" and stop the service "Windows Biometric Service"
3. delete the file "031D23AD-15AF-4e25-B7B3-DE34893097ED.DAT" from "c:\Windows\system32\WinBioDatabase"
4. reboot the computer (important!!)
5. now try to enroll some fingers
This should make it possible to enroll fingerprint and use it to log into Windows, until the bug can be fixed in some future version of BIOS and/or Fingerprint software.

My iphone 4 is not recognized by itunes when i connect to it, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

my iphone 4 is not recognized by itunes when i connect to it and tells me that the phone is in recovery mode, wants me to restore to factory settings. after i agree , an alert with error 9 stopped the sync. the phone wont start

Thanks for the response. There is no cloud icon next to them. All of the songs play on the phone still and no song was purchased through iTunes. I added them manually and tried to remove them manually. According to my iTunes they've been removed but they are still on my phone and working.

I own the iphone 4 and i was using safari and went to google something and my phone froze. My computer is not recognizing my phone when I plug it in, and my charger is not allowing my phone to charge. What can i do to get my phone unfrozen?

I own the iphone 4 and i was using safari and went to google something and my phone froze. My computer is not recognizing my phone when I plug it in, and my charger is not allowing my phone to charge. What can i do to get my phone unfrozen?

Try resetting it: hold the on/off and home buttons 10-20 seconds until you see the Apple logo (ignoring the off slider that appears first), then release. If it won't reset you may need to put it in recovery mode and restore it as described here: http://support.apple.com/kb/ht1808.

Can iMessage be used with non iOS 5 users, ie non-apple users. My new i-pad 2 error message says these contacts are not recognized by imessage when I try to text some of these contacts.

Can iMessage be used with non iOS 5 users, ie non-apple users?
My new i-pad 2 error message says these contacts are not recognized by imessage when I try to send them a text.

So that means that I can send text messages through my i-phone to reach non iOS 5 users, but not through my i-pad 2.

ITunes can't not recognized ipod nano5 when I after installing 10.5.1.42

iTunes can't not recognized ipod nano5 when I after installing 10.5.1.42

used the following prompts:
netsh winsock reset catalog
netsh int ip reset reset.log hit
And it work properly.
Thanks a lot !

Ipod 4th generation w/software version 4.3.1 not recognized by itunes since we upgraded to snow leopard.

ipod 4th generation w/software version 4.3.1 not recognized by itunes since we upgraded to snow leopard.
Help, How do we update and keep the apps/songs on the ipod?

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information paragraph since that may be the problem/solution.

Windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....aaahhh

windows vista not recognizing my iphone4s when i open itunes, keep getting trust / dont trust message on phone and always press trust. Not sure why it's started doing it. Can not synch iphone at all or add new music....as itunes does not pick up the phone I have connected anymore. My ipod synchs fine still and thats over 6 years old!

Hi rubicon7,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this information helps ....
Have a great day!
- Judy

My iphone 4 is not recognized by itunes when i connect it, wants me to restore to factory settings

my iphone 4 is not recognized by itunes when i connect to it, wants me to restore to factory settings. do i have to or is there a better way to fix it?

Howdy AndieKanaras,
It sounds like your iPhone is being recognized everywhere but in iTunes. I would use the troubleshooting for that issue in the following article, named:
If you don't see your connected device in iTunes for Mac
Thank you for using Apple Support Communities.
All the very best,
Sterling

HT201628 My ios device(iphone 5s) is not recognized in Itunes and I am using windows 8.1

My Iphone 5S is not recognized in Itunes. I am using windows 8.1. What is the problem as I am not able to sync anything on the computer to my Iphone 5s?

Use the article about this issue from the support site
http://support.apple.com/kb/TS1538

I have a brand new ipad2 connecting to iTunes 10.7 for the first time... It is not recognizing it in iTunes. It on windows and anti virus is off. What do I need to do?

I have a brand new ipad2 connecting to iTunes 10.7 for the first time... It is not recognizing it in iTunes. It on windows and anti virus is off. What do I need to do?

On the apple website that is correct i beleive.... but i have an italian american express and am able to purchase stuff here in the US.
I mean, i dont think it really matters

HT4061 my computer is not recognizing my iphone4s when plugged in

I got a new computer, (HP Pavillion) and it is not recognizing my iphone4s when plugged in. What to do?
nnurlaw

You could try the PRAM and SMC reset.
Are there any other USB devices plugged into the machine, if so unplug them.
As a work around you could use a powered USB hub until you can get the problem fixed.
Use the system report to check on any anomolies in the power and USB sections.
i.e. About this Mac/more info/system report

My notes disappeared from mail when i upgraded to mavericks

my notes disappered from mail when i upgraded to mavericks

Hello question999,
Notes are now located in a separate Notes application.
iCloud: Notes overview
http://support.apple.com/kb/PH12081
Cheers,
Allen

Validity Sensor fingerprint reader is not listed in Biometric Devices

I recieved an Elitebook 840 G1, tried to turn on the fingerprint reader, but it hasn't been recognized.
At Control Panel/Biometric Devices there is no device, although in the Device Manager the "Validity Sensor" is listed, the driver looks up to date too. I've installed HP ProtectTools Security Manager, there I can find the option Fingerprints, but at the Windows logon there is still Username/Password the only option to log on to the system.
Checked BIOS, Fingerprint logon is enabled. Tried to uninstall Validity Sensor and then reinstall it, didn't worked.OS: Win7(x64) Thank you in advance! Cheers,Thomas

In the meantime I found the solution:
I've upgraded the HP Client Security Manager (sp63509), opened the program, enroled my fingerprints, and checked "Windows Logon Security" at Home/Advanced Settings/ Security Features.
It's finally working, I'm able to log on with my fingerprints.
(Still, under Control Panel / Biometric Devices there are no items listed...)
Cheers,
Thomas

My fingerprint reader is not recognized by DigitalPersona when I upgraded to Windows 7

Similar Messages

Maybe you are looking for