My finished DVD is always of a poor quality, help please?

(Encore cs5.1)
My finished dvd normally is always:
Very quiet / Poor sound quality
Large black bars at the top and bottom of the screen
Menu doesn't quite fit on the screen (even though it did within encore)
Reduced video quality (pixelated)
Can anyone please help me out the best export settings
to combat these problems?

Well the video it's self is generally fine until i put it into encore and it gets transcoded and what not and i was wondering what's teh best transcode / export setting for encore basicly but i've answered your questions anyway
What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
Cs6
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
Yes
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Windows Ultimate 64-bit (Service Pack 1?)
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
usually .avi however i always experiment for the best result, i'm not sure what codec
If you are getting error message(s), what is the full text of the error message(s)?
No error messages
What were you doing when the problem occurred?
well there isn't one
Has this ever worked before?
never hasn't just poor quality after exproting and transcoding
What other software are you running?
well most other Cs6 programs
Do you have any third-party effects or codecs installed?
Nope
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
intel i5 2500k
8gb Ram
1 terrabyte hdd
2 terrabyte external hdd
nvidia gtx 570
guess that's all the important stuff
Are you using Mercury Playback Engine GPU Acceleration?
don't think so but don't know how to check
Does the problem only happen with your final output, with previews, or both?
Generally final output, howver sometimes the previews are off to
I hope that's what you where asking for
Message was edited by: ConnorJoe_97

Similar Messages

HT1918 I have $0.15 left in my account and I want to change to south african store but it says I must finish my balance before I change...help please.

I have $0.15 left in my account and I want to change to south african store but it says I must finish my balance before I change...help please.

If you can't spend it then you can try contacting iTunes Support and ask the if they can remove the balance so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

IDVD burning poorly? Help please

Hi,
Not sure why when i burn on iDVD the quality is freaking poor i'm burning on the best quailty (as per IDVD) so im not sure if it's iMOVIE that's transfering poorly or it's iDVD burning poorly.
I want that the DVD transfer from iMOVIE to come out the same as it is in iMOVIE.
Let me know what i can do,
-Joey

Hi Sue,
No it's just regular DV format to DVD... no photos or anything.
However in iDVD I did use a few photos for my menu screen before playing the actual dvd content... here's a screenshot as you can see it looks pretty clear however when i click on preference, under the PROJECT tab, I highlighted BEST QUALITY and it doesn't come close to the screenshot... why is that?
Is there a way I can make sure it burned very good? I know with Compressor (Final Cut Pro) you can save it as .M2V or .M4V and then burn it in toast along with the .aif file.
Here's my screenshot: http://i21.tinypic.com/24yzdye.png
I hope someone can help me out
Thanks again,
-Joey

DVD -R not accepted in slot load- HELP PLEASE

I am trying to burn an iMovie onto a DVD. I put a Memorex DVD -R into the slot load drive and it powers up and then spits it back out. I am able to burn CDs but have not yet tried to play a real DVD movie. PLEASE help. Is this a hardware problem or am I putting in the wrong type of DVD to burn? Thanks.

As long as your PB is equipped with a Superdrive and not with a Combodrive DVD -R media are th correct choice.
You might want to check:
Your Drive's capabilities through System Profiler.
If burned/pressed DVDs are also refused.
Try another brand like Apple or Verbatim.

Using Streamclip for FCE import of DVD.......HELP please, not happy

Hi there friends...
Using Streamclip to import a dvd (I shot some stuff and popped it on dvd) or two for use in Final Cut Express...
I select the .VOB files to use and it does its thing.....but when I preview (before exporting), there are fine lines on movement..
I.E when people move/ hands have lines all over them etc.
What can I do to fix this.....?
AND, What are the mest exporting settings?
Regards,
Chris

cmart7 wrote:
import to fce without interlacing and keeping as much quality as possible....
Your requirements are contradictory. Deinterlacing the footage will throw half of the pixels away, reducing quality. The DVD images are already highly compressed MPEG 2 files.
Interlacing is not a fault, it is the technique used to present the image on a television. A computer monitor cannot display a television image correctly because it cannot display interlaced video correctly.
Setting the Viewer and Canvas window size in FCP to something other than 100% will force it to display the video frames as a single field.
If you do decide to deinterlace, it should be done using the final edited master exported from FCP and only if your delivery method uses non interlaced playback, such as a web site. If it is going to be shown on a TV, keep it interlaced.
Link: How to transfer DVD footage to an editable codec properly.

Compression Settings create poor video, help please

Hi everyone,
I am really getting awful looking video playing back a DVD that I just created on a plasma monitor. I see so many compression artifacts on the edge of the words as they move.
Can I up the mbps on this project? The piece is only 90 seconds. There is no audio and there are no menus. The footage in anamorphic which will be made into widescreen once the footage goes into DVD Studio Pro. The settings I used to compress in Quicktime Pro were:
Two Pass VBR
Target bitrate = 6.8
Max bitrate = 7.5
Motion Estimation = Better
I should add that I burned the TS folders in toast and used Verbatim DVDs. Also, the image looks fine when I play it on my computer monitor or an NTSC monitor. However, it looks terrible when played backed on a plasma monitor (40 and 50 inch screens).
Any help or info is greatly greatly appreciated.
Thanks in advance, Frank

Are you playing that back through a DVD player connected to the plasma screen, or through a computer connected to the plasma screen?
The bigger question is, where did the project start? It's only 90 seconds long and it contains type... is it a Final Cut project? Motion? After Effects? Other?
I ask this because you may be exporting out of one of those programs using a less-than-ideal codec. For something that short, you really should be working uncompressed, so hopefully you're not using DV. That will help reduce noise around type (which DV itself will introduce, let alone encoding that into MPEG2).
Beyond that, you can up the bitrate. For a 90 second piece, at a high bitrate, there's no need to use two-pass VBR. Try a 7.5Mbps or 8Mbps CBR encode and see how that looks.

Settings always reset after restart! Help please????????????????????????????????????????????????????????????????

Basically I bought an iMac last October, 21", 4GB standard manufactured settings ram etc. After a few weeks every time I quit an application and go back on it, it returns to its old settings. Whenever I remove a bookmark from the toolbar on Safari and restart it, it returns to the old settings, when ever I restart the computer the dock and background changes towards its original settings. This is starting to get really annoying, and I don't know what to do and I have installed all available updates. Is an issue like this covered in a warranty and do you guys have any ideas on what I should do?

Hi...
Try Resetting your Mac's PRAM and NVRAM
If that didn't help, since your Mac was purchasd last October, it must be running Lion v10.7 and it's still under the one year warranty.
Try using Lion Recovery to repair the startup disk or reinstall the Mac OS X.
If nothing above helped, take your Mac to an Apple store or Apple certified repair provider.
You can make a reservation at a Genius Bar in advance.

PAL poor quality DVD

Have imported PAL video from HDV Sony camera in PAL format and burned DVD in PAL format too. Quality pretty poor on DVD. I imported in the format one below 1080 as the guide says little quality is lost. Does anyone import in full 1080 quality and does this improve quality of end DVD?
Also, how do I share finished project back to camera? I always did this on my old G4 with iMovie 6.

Try sharing to the Media Browser rather than using share to iDVD. Then, create a new iDVD project and drag the movie into the project from the Media pane in iDVD. This worked for me. I think you still need to use iMovie 6 to put the movie back on tape. Just export your movie from iMovie 09 using Quicktime (AIC codec) and import to iM 6.

Why are burned DVD's poor quality from the IDVD?

I made a slideshow in iphoto and exported to IDVD so I could burn copies. The show lloked great on screen but the first copies on dvd's were terrible. The quality of images are very poor and seem to be depixilated? Why would the copies be so poor? Does the widescreen or standard have something to do with it??
Help

Hi
There are levels in h*e*l*l*
iDVD - is same as DVD Standard - Interlaced SD-Video
Feeding iDVD progressive or HD material will not improve result but degrade this as from
- iMovie'08 to 11 - as they can not deliver - but only every second line of the picture
- iDVD downscaling from HD - is doing a bad job
So by using a program that can deliver - best possibly DVD is the result
- iMovie HD6
- FinalCut any version
- FotoMagico™ - (for SlideShows)
If this is not enough - then DVD is no option as HD-DVD is rare and needs special HD-DVD-players - alt
• Blu-Ray e.g. from Roxio Toast™ but still needs BD-Player as PlayStation3 etc
• out in high quality to USB-memory to be played on device that can do this
• Play via MacBook and out to a HD-projector/TV
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

I must be doing something stupid: Very poor quality DVD rendering!

I am new to Apple products and after trolling this forum, I was able to create a DVD using iDVD on my Mac mini Core Duo - 2Ghz model. But, the video is of very poor quality (compression artifacts). I am lookging for guidance to creating a better video quality. But first, let me give you some background...
I have created enough DVDs for my home videos captured both from my S-VHS camcorder and min-DV camcorders (both PAL and NTSC) using Pinnacle Studio (buggiest software in the world) and Adobe Premiere Elements under Windows. I have clear expectation of video quality and understand the quality differences between various standards.
I have a fairly new toy - Canon Powershot TX1 digital camera which is an amazing compact camera that shoots 720p video @ 30fps and stores them in MJPEG format. Very good optics (10x optical image stabilized zoom). The only con is that it has very poor low light shooting ability.
The steps I took to create this DVD...
1. Import the .avi and .jpeg files from my camera into iPhoto library.
2. Use iMovie (all part of iLife'08) to stitch the avi clips and also some of jpegs. Added transitions, titles and music in iMovie.
3. Also, added some of my old low resolution avi files (from my older Canon camera - probably in 640x480 resolution).
3. Exported it in the largest file mode (960x540) which created a 1.8GB file.
4. Opened this movie file in Garageband and added the Chapter markers.
5. Shared it with iDVD which automatically launched iDVD and showed the chapters in very nice scene selections menus.
6. Invoked the Burn menu to burn the movie into a DVD using iDVD.
Am I using the right methodology (I want the chapters)? I also observed that an earlier project which was pure 15 minutes of 720p content created a 4.7GB size exported file from iMovie whereas this current project has 51min of avi (of which about 10min is low res and the rest is in 720p format) and 12min of still photos produced a 1.8GB file when exported. This clearly tells me that the exported file is of poor quality. Why did that happen? Was it because I mixed the content and included low res videos?
I should probably try creating a DVD from the pure 720p content and see how that looks.
Any pointers would be a great help. BTW, the mac mini, iPhoto and iMovie forums are just awesome. The quality of posts and responses is very high.

Thanks a lot, F Shippey.
I exported it as a .dv file and then I was able to produce the DVD correctly with the Revolution theme and 11 chapters. I haven't done any editing any clips yet in iMovie. In most cases, I will not need to do that in most cases as the Canon TX1 creates individual avi clips every time I record and stop a recording. Having used a camcorder for over a decade now, I know how silly most of the recordings are.
I will be rendering most of my videos as h.264 so that I can use the mac mini as a media server instead of using DVDs. I have to rip my own DVDs as h.264 soon (back to handbrake).
PS: While creating my first DVD in OS X + iLife'08 tools, I noticed the following bugs:
1. The clips disappear from the display in the editing window when the project becomes large and I had to zoom in and out to make them reappear. I verified that I wasn't viewing past the end of the last clip. If I hover the mouse in the blank window, it will show the clip in the preview window on the right.
2. I had 11 chapters marked in Garageband and then I shared it with iDVD, it created two pages of scene selections with 6 chapters in each page. In the 2nd page, it added a random window (unconnected) for the 12th chapter that I didn't have. I didn't check for that and so my finished DVD has this weird 12th chapter with a copied moving clip in the window, but when selected, it doesn't do anything.
These two bugs are way few compared to what Pinnacle Studio threw at me.
Message was edited by: new2appletv

Export to HQ DVD very poor quality

Hi all,
I've been trying to export to an HQ DVD, meaning I've chosen the highest settings, ending up with a 5552Mb File for 75 mn... which I believe would be enough to have a very high "normal"definition .
ok I know it wouldn't fit but I burned 10mn of timeline with these settings, to check, and the quality is very poor. I believe as bad as a VHS second generation copy... My titles appear like a very low photoshop jpg compression, and all lignes and shapes are surrounded by some kind of compression artefacts not acceptable even in normal def. (not mentioning the interlaced lines at the edit point when the clip has been altered in size or color etc...) You get the picture...
I had a look at the calculator, that is not much help finally when exporting from premiere.
What I want to do is export my (xdcam hd 50mbps 1080 50i).mxf timeline to a beatiful dvd that everybody can play....
Should I go for a third party encoder?
Also, It seems that when I export and burn through Encore, I get a slightly vertically stretched frame, that ellipses the perfect circles I have on the timeline. Although I respect the pixel ratio of 1.0, 16.9 screen... wide screen etc... I always get this stretching. (Playing the file from the pc is correct.)
What puzzles me is to see some nice SD DVDs around, burnt from HD files and I'm not able to get at least the same results from a broadcast approved camcorder and premiere CS6.
Export settings are:
Help please... Thanks.

Glad to help.
I have been using Encore every since it was first released and on many occasions I have pruduced MPG files encoded at different rates so that I can demonstrate to the audience at my presentations how the different settings can affect the end MPG movie
With Encore I have found that the settings I gave you earlier give the best compromise results, in my tests having the max setting at its max position and the target above eight can produce flawed mpeg files. this is not as a resullt of one off encoding but I have repeated it with each version of Encore with varying results, certainly using Encore in my CS5.5 Suite produces softer DVD's than earlier versions, in my opinion that is..
With HD source my Panasonic HMC 150 Encore produces reasonable MPG SD files but the Canon 7 D produces more artifacts.
Enough of a remeniss and ramble, good luck
Addiitonally with the completed DVD there is a distinct difference depending upon which DVD player is used, using the same DVD my Sony 3D bluray player upscales better than my Panasonic Bluray recorder, whereas at a club I go to the Pioneer AV amp upscales the DVD even better, therefore I would conclude that the device playing back the DVD can have a vast effect on what you see.

How do I include the photos in a imovie project to the finished dvd so the users can have access to them?

I've included alot of old photos in an iMovie project and would like to include them on the finished DVD I create with iDVD. I woud like the users to be able to have access to them so they can print them, store them on their own computer or whatever they would like to do. How would I do this?

You do this by creating a DVD-ROM section on your DVD. See this explanation from iDVD Help.
Adding files to the DVD-ROM portion of a disc
You can let viewers copy files directly from your DVD by adding the files to the DVD-ROM portion of the disc. These files are burned onto the DVD and are accessible when the disc is viewed on either a Windows PC or a Macintosh computer, but not a DVD player.
You can add any kind of file to the disc. For example, if your disc contains a slideshow, you can add the image files to the DVD-ROM portion of the disc so viewers can download them to their own computers and print them. You can also add a file containing your movie production notes and other “extras.”
To manually add files to the DVD-ROM part of your disc:
Choose Advanced > Edit DVD-ROM Contents.
The DVD-ROM Contents window opens.
Click Add Files, or click New Folder first if you want to create a folder to put the files in.
Browse to select your files or folders, then click Open to add them to the disc.
You can also drag files directly to the DVD-ROM Contents window. When you are done, just close the window.
When you add a file to the DVD-ROM portion of your disc, before you burn the disc the project contains just a reference to the location of the file on your hard disk, not the actual file. So if you delete a file from your computer or move it from its location after adding it to the DVD-ROM contents, you get a “File not found” message when you try to burn your disc. You can either remove these missing files from the DVD-ROM contents or find them on your computer and put them back in the original location so iDVD can access them.
As you add files to the DVD-ROM contents, be sure to check the DVD Capacity meter in the Project Info window to find out how many gigabytes of disc space are being used. The Capacity meter shows the disc space taken up by the video portion of the disc as well as the DVD-ROM portion.

Please help i started my project video format 720HD resolution 12x720 rate 25p at last when i finish and burn to dvd the edges are cut off any one help please i am really in trouble

please help i started my project with video format 720HD, resolution 12x720, rate 25p. at last when i finish and burn to dvd the edges are cut off and my logo cut off the screeen aswell any one help please i am really in trouble. thanks

Sorry, but I don't know anything about that app.
I did go to their Web site and I see they have a support link. Perhaps you can get help there or in their forum.
If you are OK with a DVD with a basic menu, you could try the Share>DVD option in FCP.
Good luck.
Russ

Missing media in finished DVD but not missing in Timeline

Dear Gurus and others-who-know-far-more-than-I-do
In my latest video, exported from PPro (CC 2014) via Media Encoder and Published with Encore CS6...my finished DVD has a number of red "Missing Media" spots, but going through the PPro timeline there does not appear to be ANY "Missing Media". I've never had this problem before. Any ideas, anyone?
Regards
Roy

Please do not EVER download a codec pack !!!
Some people who have done so have then had to wipe their hard drive and install fresh to fix the problems
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
What you LIKELY have is an issue with the MJPEG codec... so IF that is what is inside your file, read...
MJPEG http://forums.adobe.com/thread/730396

Poor Quality Stills on DVD

Forgive this old favourite. I've gone through lots of past threads and still would like some help please. I've also posted the same question on the FCP forum as I am not sure in which application the solution lies.
I am making a 04'00" film in FCP from jpeg stills alone. Some are in boxes, other have motion effects, all have lots of layers of text / text boxes on them. In short it's a real fiddle and render nightmare compared to good old DV!
Anyway, a couple of questions. My final delivery format is DVD to play on a flatscreen LCD or Plasma screen, so should I be proofing the quality of the image on my cathoid ray tube monitor or on the LCD monitor of my iMac? Does the final TV platform make a difference to workflow?
So far, following back thread advice, I have changed the Field Dominance button to None and dropped the Whites level to 90% which made the image on the LCD timeline fantastic (it had been aliasing massively before) but it still aliases on my CRT.
Also, when I export the rendered film as a Current Settings QT and then encode via Compressor and put it into DVD Studio Pro, the picture quality again looks fantastic on DVD Studio Pro Simulate but once encoded onto the final DVD, the shots with movement added are very poor, with lots of aliasing.
Forgive the long intro, but has anyone got a workflow I could try to reliably turn moving jpegs (big ones c12Megapixels) of houses (ie lots of straight lines which tend to flicker when moving) into a DVD to be played on LCD or Plasma in which the straight lines look straight and there is no aliasing or flicker on the pan /scans?
Thank you in advance.
Hamish
iMac 2Ghz intelduo FCP 5.5

Well, its obviously best to test your output on a source closet to your final display medium. You won't see the flickering of the thin lines on your monitor for several technical reasons, notwithstanding the fact hat simulator is not overly accurate (they even say that in the manual). Your monitor is not a substitute for how an image will look on an NTSC monitor, regardless of if its plasma, lcd, etc. Thin lines are usually killers, and taking time to thicken them in photoshop may not be your cup of tea. Jpegs are lesser quality picture format to begin with, but if thats the only way you have them, so be it. You usually run into a similar flicker problem when screen capturing websites to put on DVD. Webdesigners like to use thin, straight lines which flicker like crazy. Darkening and thickening can help, but again I don't know how much of a rush you are in.

My finished DVD is always of a poor quality, help please?

Similar Messages

Maybe you are looking for