My fire vault seems frozen

I just purchased a MBA 11" 1.3 ghz I5 256 Flash drive and during set up started the fire vault process. Currently i have a message telling me to plug in power cord to finish encryption. However when I do this it seems to be frozen. Im new to mac products and love the MBA but when to fix this, please help.

I Have this exact same problem help needed!

Similar Messages

How to use Fire Vault 2 on all my external drives?

How do I encrypt all of my external drives?
How do I use the WIPE/ERASE feature if necessary?
Love my Lion! I call him Simba...

Well - it seems as if I "should" be able to do this, however, I may not have the skills or the nerves. I'm extremely happy with how the Encryption code in Lion worked seemlessly and flawlessly and I now have a full, encrypted main drive. My quest has been to encrypt all eight of my drives (seven external) - and frankly, I don't feel qualified enough to even follow those directions in the article. I tried the following in termanal:
/dev/disk2
and received this response
Permission denied
Which pretty well tells me I'd be in over my head! For grins, I checked ownership and permissions on my Drive 2 and I'm listed as an okee dokie kinda guy, but Apple - well Apple can "tell your level of geekness" - of this I'm sure of!
You've been very help ful - and I appreciate it. FYI: On Saturday, I was able to locate an article on Fire Vault 2, and a description. Both are now gone from the Apple site. Initially, the description DID describe an encryption process for all your drives. Then there was something called "Wipe" (I think that's what it was called) that in an emergency, allowed for an easy wipe of all files - permanently. Nothing about that is up there any more. I wonder if Apple has received more questions about this and realized maybe they needed to re-do their description and capabilities? It seems now that "encryption" is only mentioned in "Disk Utility". Hmmm!
Bob

Turning off Fire Vault.

I have unlocked the file, but cannot get it to turn off. This started when I turned my computer back on. I don't know what I did to trigger Fire Vault to turn on. Help!

I'm going to guess that you were prompted to enable FileVault when you upgraded to Yosemite, and you confirmed without knowing what you were doing. It normally takes a few hours to encrypt the startup volume. During that time, performance will be reduced. You can monitor the progress of the encryption in the FileVault tab of the Security & Privacy preference pane. If it seems to be stuck, ask for further instructions.

I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted

I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted.
is there a way to stop it in the middle so it does not go through the whole process

It's called, "FileVault." If there is no option to stop the process, then the best bet would be to wait until decrypting is finished. Otherwise you run the risk of borking the whole thing. It's hard to imagine how you can accidentally turn off FileVault.

I am trying to stop encryption in fire vault, but I keep getting the message, The target disk isn't eligible for reversion because it wasn't created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨

I am trying to cease encryption in fire vault, Mac os x lion 10.7 4
I keep getting the message,
¨The target disk isn’t eligible for reversion because it wasn’t created by conversion or it is not part of a simple setup of exactly one logical and one physical volume.¨
Please can someone advise the way to disable?
Thank you.

Are you using Boot Camp? See this discussion at MacRumors.
Clinton

"Fire-vault protected home folder did not open and needs to be repaired."

I recently updated my macbook to leopard and after my laptop downloaded system updates, it had to restart but when I came to the login section and tried to login, I get this message:
"Fire-vault protected home folder did not open and needs to be repaired. Click OK to repair the folder and continue logging in. Click Cancel login to log in as a different user."
I don't have a different user so I clicked OK, but then I get this message:
"You are unable to log in to the user account "Kyle" at this time. Logging in to the account failed because an error occured."
So now I can't login and I'm a college student and need important files on my computer. Someone please help! I have class tomorrow!

Sorry, I re-read your question and realize from the title you had file vault on upgraded and now it won't let you into the home folder. This is a known issue and I hope Apple produce a fix. I encountered this problem but fortunately I took a bootable image backup to a firewire drive. I booted off that as root and then opened the sparese image which is the home folder. This gave warnings but let me copy important documents to safety and also export address book and safari book marks.
If you do not have a backup I am very sorry to say you may have lost those files. It is worth backing up important college work, even if it is just to CD. I hope Apple come up with a fix for this because many of us hit this problem. Part of the reason for owning a Mac is you do not expect to have these issues. It made me feel like I had just installed XP!

MY BB CURVE 9315/9320 TRACKPAD SEEMS FROZEN

I SET UP A PASSWORD FOR MY KEYPAD BECAUSE OF MY KIDS...NOW MY TRACKPAD SEEMS FROZEN BECAUSE EVRY TIME I TYPE MY PASSWORD IN AND CLICK THE TRACKPAD , THERE IS NO RESPONSE AND SO I CANNOT UNLOCK MY KEYPAD. HAVENT BEEN ABLE TO USE MY PHONE AT ALL BECAUSE OF THS. ANY SUGGESTIONS PLEASE

Hi harrietta2733
Welcome to BlackBerry Support Forums
Please try a Battery pull restart , remove the battery while your device is Powered On , wait for a min. then re-insert it back. After reboot , try it again to see if your trackpad works .
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Fire Vault Issues

Hello one and all,
I recently bought and installed a new HDD into my late 2009 MBP am trying to transfer everything over. I have it all backed up to an external disk. When I go into migration assistant, I can't swap my profile over because my profile is backed up with fire vault. When I re-enter my original HDD and try to deactivate the fire vault, it tells me "Turning off fire vault requires an additional 88.4 GB of free disk space on the volume '***'. Try emptying the Trash or deleting files you don't need." Well I'm not exactly a file pack rat so I definitely do not have 88.4 GB of extra files laying around. And the reason I am trying to switch out HDD is because as you may be able to tell, I am flat out of room in my HDD. Any suggestions? I'm not afraid to go into all of the fun stuff inside my mac so just about anything with enough instructions will work!
Thanks for reading through and hopefully thanks for an answer!

Bholland5583 wrote:
tjk - I don't have an external enclosure but I will look into it. Thanks.
Newegg, Macsales, Amazon, etc. a USB enclosure for 2.5" SATA HDs can be had for about $15. I much prefer FireWire 800, but that costs more.

What is Fire Vault exactly?

I'm unsure.
I was clicking around and hit the "Turn Fire Vault on" button then clicked out.
Now, on my log in screen there's a "reset password" button which I want to get rid of. This happened after I did this whole accidental fire vault thing.
any suggestions?

I'm not certain about the change password button, but file vault is a means of encrypting your entire hard drive so persons cannot access the data without a password. Once turned on, everything is password encrypted on the machine.

Shoud the fire vault and fire wall be turned on iam a new imac user

should the fire vault and fire wall be turned on. iam new to apple this is my first i mac

John Potts wrote:
Is the router's hardware firewall equally effective if one is connected wirelessly (as opposed to via an Ethernet cable)?
IMHO, yes.
also, if your network is protected as mentioned above, it would take a very determined hacker with lots of time to hack into it.
additionally, make sure you password protect your base station(s).

I went into a web sight and can"t get out the screen seems frozen no matter what I do there is no response. Please help?

I went into a web page I must have left My Ipad in the web sight when I went to use it again the screen seems frozen. Anything I do I can't get a response. Please help

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

What to keep in fire vault?

What should you keep in fire vault and, under Mountain Lion, does it affect the operation of Entourage?

Everything, and no.

I have iMac osx version 10.8.5 and i forgot my account login password. i can't change it using my apple ID nor i remember my password.also my fire vault is not on and my keychain won't help. PS i can't also use the terminal idea it always not found.help

have iMac osx version 10.8.5 and i forgot my account login password. i can't change it using my apple ID nor i remember my password.also my fire vault is not on and my keychain won't help. PS i can't also use the terminal idea it always not found please help !!

You need to restart the iMac and hold down the Command and R keys immediately.
You will then have the utilities drop down and you choose Terminal
When Terminal opens, type exactly:
resetpassword
and press Return.
When the Reset Password window opens, select the user for which you want to change the password.
Enter the new password twice, and then click Save.
Accept the next dialog window,
And then Apply
When finished click the apple at the left side of the menu bar, and the Restart.

HT1212 my ipad seems frozen I can't enter the passcode or turn it off what can i do?

my ipad seems frozen I can't enter the passcode or turn it off what can i do?

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

My fire vault seems frozen

Similar Messages

Maybe you are looking for