My Firefox automatically updated to version 6.0 using Windows XP version 5.1 and now crashes immediately when launching. Please help!
AdapterDeviceID: 0046
AdapterVendorID: 8086
Add-ons: {20a82645-c095-46ed-80e3-08825760534b}:0.0.0,{CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}:6.0.26,[email protected]:1.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:5.0
AvailableVirtualMemory: 2041290752
BuildID: 20110811165603
CrashTime: 1313632985
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1313612855
Notes: AdapterVendorID: 8086, AdapterDeviceID: 0046, AdapterDriverVersion: 6.14.10.5284
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 493
StartupTime: 1313632985
SystemMemoryUsePercentage: 33
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 2147352576
URL:
Vendor: Mozilla
Version: 6.0
Winsock_LSP: PGPlsp over [MSAFD Tcpip [TCP/IP]] : 2 : 1 : C:\WINDOWS\system32\PGPlsp.dll
MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 6 : 2 : %SystemRoot%\system32\rsvpsp.dll
RSVP TCP Service Provider : 6 : 1 : %SystemRoot%\system32\rsvpsp.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{B83D5C54-A228-4C11-8CF2-9BDE1BC80542}] SEQPACKET 7 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{B83D5C54-A228-4C11-8CF2-9BDE1BC80542}] DATAGRAM 7 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{00EEA786-C6C9-4B1B-A6D1-4D4370756CFB}] SEQPACKET 6 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{00EEA786-C6C9-4B1B-A6D1-4D4370756CFB}] DATAGRAM 6 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{78DC6F03-A421-4A91-AACD-5BCDCC4E3B9A}] SEQPACKET 5 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{78DC6F03-A421-4A91-AACD-5BCDCC4E3B9A}] DATAGRAM 5 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{ACF748D6-DDDC-4544-BDDF-4750DD36ACD0}] SEQPACKET 4 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{ACF748D6-DDDC-4544-BDDF-4750DD36ACD0}] DATAGRAM 4 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{E8A5EFA9-F9F9-4115-BDFC-9BE1DA791C82}] SEQPACKET 3 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{E8A5EFA9-F9F9-4115-BDFC-9BE1DA791C82}] DATAGRAM 3 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{A89C1563-E5ED-47A3-8561-F6F24227C515}] SEQPACKET 0 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{A89C1563-E5ED-47A3-8561-F6F24227C515}] DATAGRAM 0 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{0FBF9E84-2D31-4104-A933-37AE54109778}] SEQPACKET 1 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{0FBF9E84-2D31-4104-A933-37AE54109778}] DATAGRAM 1 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{07843780-C1EC-46E9-9B5E-95CF508BF609}] SEQPACKET 2 : 2 : 5 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{07843780-C1EC-46E9-9B5E-95CF508BF609}] DATAGRAM 2 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
PGPlsp : 2 : 0 : C:\WINDOWS\system32\PGPlsp.dll
This report also contains technical information about the state of the application when it crashed.
Safe mode works, disabling all plugins does not resolve. Installed older version of Firefox. This failed to resolve.
Similar Messages
-
My mac mini v10.6.8 wont finish installation of update Yosemite and now im stock at boot Please help!!
Try stating in Safe Mode:
OS X: What is Safe Boot, Safe Mode?
Next try reinstalling Yosemite by:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Please help. I cannot update the software on my iPhone c.
I go onto software update but the Download and Install options is not there.
I have tried deleting apps to make space so this doesn't appear to be the issue.iOS 8.1.3 is the latest version. There's nothing to download.
-
i Just got an iPhone and I did not have icloud or iTunes yet. My photos from my previous phone were synced to my new phone and after the update they all disappeared. Please help me recover my pictures
If all you did was sync your phone, and if you haven't synced again since this happened, you can restore your phone from the backup that was created at the beginning of the sync process (camera roll photos are included in the backup). If you have synced again since this happened this backup has already been overwritten and your photos are lost. Also, if you restored your phone from the backup of your iPod, rather than just synced, then your photos are lost too.
If you have an intact backup that contains these photos, do the following:
Without connecting your phone, open iTunes on your computer and go to Preferences. On the Devices tab check "Prevent...from syncing automatically".
Connect your phone to your computer, right-click on the name of your phone when it appears in iTunes on the left sidebar and select Restore from Backup, choose your most recent backup to restore from.
When complete, you can go back to iTunes>Preferences>Devices and re-enable automatic syncing. -
Updated Xperia Z on Pc companion, failed and now won't open! PLEASE HELP!
I flashed my phone months ago but now I just wanted to upgrade it to Lollipop or what ever is the latest update for my phone but the problem was during update, the PC companion suddenly stopped. Said it had errors, and would not go any further so I removed my phone from being connected to the PC and now it won't open. How can I make it work again? or at least can I still get the data inside? Please help this is a very heart breaking event. Important memories are inside my phone
Hi,
If I understand you correctly, the phone won't even power on now? No reaction while you hold the ON/OFF button? If that's the case, you will unfortunately not be able to backup any data.
With PC Companion you can perform a software repair. In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it. -
I am running OSX 10.4.11 on my iMac; Firefox automatically updated to version 12, and now it will not run on my computer.
Is there a way to deinstall the new version while keeping my saved bookmarks, etc?
If not, how do I deinstall 12 and reinstall the older version of Firefox that worked with my operating system?
Thanks.[[Firefox no longer works with Mac OS X 10.4 or PowerPC processors]].
You can install Firefox 3.6 from [http://www.mozilla.org/en-US/firefox/all-older.html http://www.mozilla.org/en-US/firefox/all-older.html]. Please keep in mind that not only is Firefox not receiving any updates (thus rendering it insecure), neither is Mac 10.4 or any of the plugins used on it. Running such an old Operating System is dangerous to your information's security on the internet. something for you to keep in mind. -
How can I prevent Firefox automatically updating when first opened on a new CentOS Installation ?
Hi,
I just installed CentOS on a new virtual machine for testing. I need to run Firefox 28 on it.
NO. Don't argue. It needs to be firefox 28.. Yes, I know firefox 35 is out. Yes I know it fixes important vulnerabilities. Yes, I know it has a load of new features. That information won't help me in the slightest. I need Firefox 28 on this virtual machine for a very specific reason, firefox 29, 30, 31, 32, 33, 34 and 35 won't be suitable for this purpose.... The reason I need it is to do with testing a specific website compatibility with older browser versions on multiple operating systems. I am fully aware that the latest version of firefox is the "best"... but it's not what I need right now, so please don't ask questions like "why are you using an older version" or suggest things like "you know, it's really in your best interests to use the latest version"... I get it, OK.... but that's not a helpful reply to this question, because I have a really specific requirement here.
... sorry if that seems rude, I just know what sort of replies get posted here whenever someone suggests using an older browser. I do get why people give such advice. I do understand the benefits of keeping computers that connect to the internet up to date. This particular Virtual Machine won't actually be used to connect to the internet... just to a test website on an intranet.
So the problem I have is that this installation of CentOS 6.4 (x64) comes with Firefox 31. When it first opens, before I have a chance to toggle off update checking, it begins downloading Firefox 35.0.1 and I haven't figured out how to abort the download. I thought about killing the task, but I feared what that might do. So I let it update to Firefox 35 and thought I'd just downgrade it to Firefox 28 afterwards.
I do have the standalone installation of Firefox 28 for linux (firefox-28.0.tar.bz2). I can extract it on the CentOS virtual machine. I thought for my purpose, I could then just run the browser binary.... but it started updating before I could change the option to never check for updates... and there's no option to abort the download there....... sigh...
So I tried editing the file update-setting.ini. I was quite hopeful when I saw it say:
; If you modify this file updates may fail.
; Do not modify this file.
So I changed the setting below to say:
[Settings]
ACCEPTED_MAR_CHANNEL_IDS=dont_update_this_please
hoping that my rather rash change might indeed cause updates to fail :-)
Sadly, it seems that the updates are still happening.
Basically here is what I need on CentOS - A way to run Firefox 28 without it updating to a newer version without asking me first. I don't mind if it keeps asking me... so long as it asks me instead of just doing it without asking.
Just to be clear again - this is for a test configuration I have to build, on a virtual machine. It's OK for this one specific machine to have vulnerabilities, it's OK that it doesn't have all the new features of Firefox 35. It's what I need. It won't be used to browse the internet and go to dangerous web sites that might implant malicious code. It will only be used to connect to a specific web server, behind a corporate firewall, that my company tightly controls. I'm pretty sure doesn't have malware on it (if it does, I have much bigger problems that using an old version of a browser) . Then in a few weeks time, this VM will be deleted, along with the old version of Firefox I hope to have running on it.
Incidentally, I may also have to repeat whatever I'm doing here later on another CentOS VM to install Firefox 27, 26, 25... but I'm hoping I don't have to... but I assume that whatever procedure works for Firefox 28 will work for these other slightly older versions too... don't worry, I don't have to go all the way back to Firefox 1.0... it's not THAT bad :-)
So, with the understanding very clear that normally you would probably recommend just using the latest version.... can anyone help me ?
Thanks in advance.Firefox tarballs from Mozilla Org use prefs within Firefox for updates. The "toggle" for not automatically updating - '''app.update.enabled''' and where to look for updates - '''app.update.url'''. The first needs to be '''''false''''' and the second could be a '''''null''''' string, do an update can't be found.
''I use both prefs to keep Firefox from updating by itself. I install each new version of Firefox as it is released, and keep the older versions around for reference purposes. Those prefs are the same since Firefox 1.5 came out.''
The versions of Firefox that are part of an operating system installation usually are that OS's own build of Firefox, and don't use the same update setup as Mozilla uses, in most cases. I am not familiar with Cent OS, but Ubuntu and Debian look for Firefox updates and from their own program repository servers outside of Firefox - as with the tarballs from Mozilla. -
June 10 2012 Firefox automatically updated itself (no choice) on my Intel Mac/Tiger 10.4.11. I can no longer use Firefox. I have an old version of Firefox on my Mac G4, but am scared to use that machine in case that Firefox also automatically updates itself. How can I transfer a copy of that older version of Firefox (from the G4) to the Intel Mac, and how do I stop both versions from then automatically updating? How do I then remove the updated version of Firefox from the Intel Mac, which I cannot use? Thank you for your help.
esqki FF update to 13 and now you can't open ? sorry about that.
1. Download (with your safari) a copy of the latest (3.6.28) from your 10.4.11 mac
from
ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/3.6.28/mac/
2. '''Trash''' the current Firefox application to do a clean install.
3. Install the version that you have downloaded (3.6.28).
Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac?redirectlocale=en-US&redirectslug=Installing+Firefox+on+Mac Installing Firefox on Mac]
after install the 3.6.28 version go to: Options > Advanced > Update tab > Firefox updates, check mark '''Never check for updates (not recommended: security risk)''', click Ok to save it, exit firefox and restart it.
https://support.mozilla.org/en-US/kb/settings-network-updates-and-encryption#w_update-tab
thank you -
on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?
thanks for your reply.
in Dutch it says that there are no updates available. I know that after
installing cs4 there are updates but i can't load them automatically. I did
a delete and reinstall, but still get the message.
kind regards,
2014-09-23 16:28 GMT+02:00 Atul_saini123 <[email protected]>:
on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the
automatic update voor CS4 master collection. I removed my panda antivirus
and still can't automatically update. somebody any suggestion? created
by Atul_saini123 <https://forums.adobe.com/people/Atul_saini123> in *Downloading,
Installing, Setting Up* - View the full discussion
<https://forums.adobe.com/message/6755843#6755843> -
Hi,I have iPhone 4.later I buy this after 30 days home button is not good! Seller shop say update software do this,this problem will fine! I update 2 times,my version is 5.1.1 now! But my home button is not good! I buy and register 8.9.2011! Please help me how I do?
Where are you and where did you get the phone? All iPhones come with a 1 year warranty from the original date of sale.
Make an appointment at the genius bar of your local Apple Store and take it in for them to have a look at. -
I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?
Hey Todd Rubenson,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows unexpectedly quitting. The following resource may provide a solution:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M. -
Please help i updated my iphone 4 running iOS 4.3.3 to 5.0.1 and couldn't restore the back up of the older version,but I still have the folder of the older back up in AppleComputer,mobilesync please help !! thanks in advance
if you want an intelligent answer, you'll have to provide intelligent information.
WHY couldn't you restore the order backup? Was there an error message? What EXACTLY was the error message? -
Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store -
I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.
I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple. -
I updated to Safari 6.1 and now it freezes when opened
Yesterday I updated to Safari 6.1 and now it freezes when opened, although the overall system stays up. I updated to the latest Java and iTunes 11.1.2 at the same time. When I open Safari now, it pauses for a few seconds without going to the home page and then I get the spinning beach ball. I get two messages: One says that the plug-in for SplashID Safe has not been tested with this version of Safari (a message that I had been getting before the update and never caused a problem). The other message says, "Crash Protection It appears that Safari didn't quit properly. Do you want Glims to re-open your tabs anyway?" It gives me a choice to click "Cancel" or "OK". I have tried clicking them (before the beach ball appears) and it makes no difference. The version of Glims I am running is out-of-date.
The only available crash report is almost a month old and therefore is of no help.
I made a back-up with SuperDuper just before updating and can reverse the update if I do it soon, but I would like to get this working.
I would appreciate any advice.
Bill>>The version of Glims I am running is out-of-date.
How do I uninstall Glims?
Maybe you are looking for
-
Null values passed into the servlet
Hi all, I keep getting null values for all the params that I pass into the servlet i.e. sqltype, producttype, process, instance etc....I have attempted to print some of them out on the screen but I keep getting the 'NullPointerException' error messag
-
Delta in Generic data extraction
Hi all, I have a doubt here, What is the delta in Generic Data extraction? What are the types? and what are their significances? Please give reply. Thanks Surya.
-
Zen Micro Problem XP wants to load driver but will
when i plug it windows says new hardware found wants driver. i dont understand. I use on another system it loads just fine. i have download the software and tried to load it and it will not see the zen micro. Message Edited by hellomynameis on <SPAN
-
Hi, I have an application that connects to LDAP using JNDI. Now suppose i DONT close the context (context.close()) then will the connections to LDAP will be closed automatically when the context object goes out of scope and gets garbage collected? Or
-
Brand new powerbook g4 - never reaches 100% charge
Does that seem normal? Laptop is only a week old and only reaches 99% (it goes roughly 3 hours on battery at 99%). I know its just 1% but seems odd to me that it doesn't reach 100%. Anyone else experience this? I'm hoping its just a quirk rather then