My firefox is not working . what is the best way to fix it
i have been getting a lot of script on this page is not functioning messages and in the last day or 2 firefox has stopped running and will not open when i click on the firefox icon . is the best thing to do to fix the problem to remove my current version and re download it from the mozilla home page or can it be fixed another way . also if i do have to remove it will i loose my bookmarks .
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.
Similar Messages
-
My iPhone 4S will not sync with the music I have selected in iTunes. Has anyone else had this issue and what is the best way to fix it.
Hi,
Setting up syncing
Before setting up syncing you should download and install the latest version of iTunes. Wi-Fi syncing requires iTunes 10.5 or later and iOS 5 or later. You can change your sync options at any time. Each time you sync, content is synced between your iOS device and computer to reflect new, updated, or deleted content.
USB syncing
Open iTunes.
Connect the iOS device to your computer using the included USB cable and select it in iTunes under Devices on the left-hand side. Some tabs may not appear if you do not have corresponding content in your library. For example if you do not have any podcasts in your library, the corresponding Podcast tab will not appear.
Click Apply, in the lower-right corner of the screen, to sync.
Wi-Fi syncing
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
In the Summary tab, select "Sync with this [device] over Wi-Fi".
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
The iOS device is plugged in to power
iTunes is open on the computer
The iOS device and the computer are on the same Wi-Fi network
While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
Hope this helps -
I have iphone 5, after upgrading it to iOS7, front is working find unfortunately rear camera became blurred, what is the best way to fix this? Looking forward to the best solution of this problem.
WORKAROUND FOUND ! Download and install "Awesome Camera" app and take a picture with that app. After 1-2 seconds of standby, it will work. Then you can go back to default Camera app which would work again.Please let me know
-
hi froends
i want to transmit a square pulse using lab-view, please help how to do that, the preference will be USB,SERIAL, Parallel ports, it it must be compatible with all the os versions, like 2007 windows, vista,XP and other.
please help..................sanghi wrote:
OK I WANT TO DRIVE A RELAY.
SUGGEST SOMETHING
Calm down!
People can't read your mind. If you want help, repsect those who contribute their time for free to try to help you.
Put yourself in our shoes. If I tell you I want to build a rocket, what information would you give me? You would need to know if it's for a hobby, something bigger, carries a payload, carries living organism, how far does it go, where does it land (if at all), etc...
First of all, we still don't know what you want to do with this relay. Using a computer to generate is series of pulses is not usually the best way. What is the frequency of the pulses that you want to transmit? And why do you want to use a relay? What are you driving? Can the relay that you are using fast enough to follow the pulse train that you'll be sending?
Provide information, ask questions politely and people will help you. -
I bought a macbook pro from a cash converters store. It was online and in the description didn't mention anything about this issue. I can't really explain it very well so here is a picture.
http://i839.photobucket.com/albums/zz318/donnam1993/photo-2.jpg
Is there any way to fix this, if at all? I don't really know very much about macbooks and since i just got this yesterday i have no idea what caused this. Thank you very much for your help.It's difficult to determine if your photograph shows a smudge on the exterior of the display, or if it is a display anomaly. Turn up the brightness. If the image changes it's a display problem.
You can clean the first one, but if it's the latter it is a hardware defect that will require parts, tools, labor or money to fix. -
Every time there is a change to the active X server I am developing drivers for I have to go back through all the vi's I have developed and re-point the methods an properties back to what they were to fix the broken arrows. The only change in the Active X server is usually an additional method or property. There has to be a better way, I have over 130 vi's I have to fix for every update and it keeps getting larger.
This is somthing I can try, but I don't think it will solve my problem. My reference never changes, it is always the same and is correctly registered with every new release. What does change are the number of methods and properties. With each new release there are usualy additional methods and properties; however, the old ones are still there with the same names (thank goodness). The problem this causes with LabVIEW, apparently, whenever there is a change in the type library you must re-point all the methods an properties again, at least this is what I am experiencing. If doing what you suggested works, it would be some kind of magic that I would like an explanation for.
-
What causes the itunes.msi error and what is the best way to fix it?
i have windows xp. when trying to update to itunes 8.2-the installer can not locate the Itunes.msi file. i found the file but the installer can't use it. this is also the case when i try to delete itunes and/or reinstall.
what causes this error and could someone point me in the right direction as how to fix this.
also i can't open itunes without having my ipod connected..so annoying. is that normal?
thanks. =)Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
I made an iMovie 10.0.4 project with a bunch of stills and when I came back later today they had turned black like they weren't there.
Like this:
When I play them they're black as well.
Normal Still:
"Missing" Still:
What's with that? What's the best way to fix it?
Thanks.Hi
Magic solution - NO
Some thoughts - YES
Is the iPhoto Library still where it was previously (or on external Hard Disk - now turned off) ?
One approach might be to - Repair iPhoto library (but this takes hours - so try below first)
Trouble-shooting guide
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W -
What's the best way to back-up iPhoto library prior to update?
Am seeing this message when I try to open iPhoto, post-software update of last month.
I've been told I need to back up my iPhoto library prior to this update, but not sure what's the best way to do that.
I don't need to back up my whole system. Is there a way to choose just to back-up iPhoto when running Time Machine? Or, where can I access the folder that contains all my iPhoto images and just copy that to my external drive?
Ayy suggestions would be appreciative! THANKS!Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate -
What Is The Best Way To Set Up Kids iTouch To My iTunes?
I have an iTouch set up with my iTunes music, movies and apps, but now I gave my kids each an iTouch.
What is the best way to set up there account, should it be a unique account for each of them or should I put them under my account?
They will be using my same iMac when they sync or update there iTouch, so will they need to log in under their name every time?
Not sure what is the best way to set this up, they are both minors, i.e. no credit card.
ThanksBetter just your account for multiple devices. The only drawback is that the music will have to managed manually.
Connect one of the iPods to your computer then launch iTunes. You should see the iPod under Devices on the left side of the iTunes window. Double click then you can name each iPod to keep them separate but only syncs to your iTunes account.
Without knowing your Apple ID user name and password they would not be able to make purchases ergo no downloads you aren't aware of.
How to use multiple iPods, iPads, or iPhones with one computer
The kids are minors.. if they are under 13 years of age, according to Apple, they can't have their own accounts regardless.
http://www.apple.com/legal/itunes/us/terms.html#GIFTS -
My ipod touch charging port has snapped, what is the best way to get it fixed?
help ! my son has managed to snap the charging port prongs in his 4th G ipod touch. What is the best way to fix this as it wont charge?
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the connector for less. Google for more.
Simple and Affordable iPod Repair Services and parts from iResQ -
What's the best way to maintain 2 libraries one lossless the other MP3?
I'd like to have 2 music libraries one for home (lossless) and one for my iPhone (MP3). Not sure what's the best way to achieve this and maintain.
To create or access a second (or more) library on a Mac, hold down the "Option" key (labelled ⌥ and/or alt) when launching iTunes: Using multiple iTunes libraries -Mac
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. -
Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as
Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense. -
. I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?
That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
What kind of media files are that?
For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
* https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download -
I am trying to rebuild my iPhoto library and noticed my backup contains aliases (pointers?) and not the actual file. What's the best way to rebuild my library?
Facts:
In moving to a new iMac, I copied the iPhoto library to an external HDD assuming that I would point the new iMac to the backed up iPhoto Library
All worked fine when I pointed the new library but noticed that some folders contained aliases and not the original file. So when I attempt to open that photo it can't find it because the alias is pointing to another drive.
I do have all original photos from a couple of external HDDs. In the folders titled, "Originals" (from older versions of iPhoto) and "Masters" (from current iPhoto)
I'm thinking I can create a new folder and drop the original files and make that my new iPhoto library. Is there a better way to rebuild my library? I do not want to create any future aliases.
Thanks in advance for any help!do you have a strongly recommended default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or a referenced library - you have unchecked that option?
It sounds like you have a referenced library and are now experiancing one of the very siginificant drawbacks of a referenced library and one of the many reasons they are strongly not recommended
Also note that iPhoto '11 may use alises in the originals folder as part of the upgrade
It is important that we understand exactly what you have and what is not sorking - what error messages you are getting
You must NEVER make any changes of any sort to the structure of content of the iPhoto library - there are no user servicable parts in it -- and you can not rebuild yoru librtary - only iPhoto ir iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - can rebuild a library unless you are a SQL programmer and understand the structure that iPhoto uses
LN
Maybe you are looking for
-
Mini-DVI does not work with DVI anymore only VGA output
Hi, I recently started to get problems with external LCDs. It used to work just fine, but now I can only use a mini-DVI-VGA adapter to get any output. This gives me much worse results than digital and makesme a little worried, other things might also
-
What computer or capability do I need for Premier elements 11?
I find that my Dell Studio 1555 becomes jerky or stops and starts when in the editing mode of premier elements. Its a 2Ghz, 4 GB machine. I'm not sure where the limitation exist. ie: memory, video card, the software itself? The Dell 1555 has no probl
-
Hello Can anyone help re the above program I have had on my PC. Have today purchased a new PC with Windows7 Pro. My CS4 is still on the old hard drive using Windows XP. I have had that drive installed in the new PC as a slave, but now I am unable to
-
Why can't I uninstall AirPort 4.2 from my Windows 7 PC.. I tried downloading and reinstalling the 4.2 but during the installation process I get an error. It reads... "1608: Unable to Create InstallDriver instance Return Code -2147024894
-
Photoshop Elements 10 RAW Files
How do I import RAW files from my Sony RX100 11 to Adobe Photoshop Elements 10? I think I need a plug in called ARF 8.2. If this is correct how do I purchase/install it?