My Firefox Will Not Update from 3.5.8 to 3.6 on my MacBook Pro, please help?

The laptop is less than a year old, and I hadn't used Firefox since I got it. I'm returning to Firefox now, but it's version 3.5.8 and I want 3.6. I check for software updates, but no FF update is offered. I try to download 3.6 from the Mozilla site, and all goes well until the end, when I get window with the message "The operation can't be completed because you don't have permission to access some items." Frustrating!!! Please help me update to 3.6. It shouldn't be this hard, should it?
Thanks from Dustie

It sounds like you have an iphone 3g, which will only go to 4.2.1

Similar Messages

Firefox will not open Version 4.01 (tried to download new version), on MacBook Pro running 10.6.8. Safari and Chrom both work OK

I cannot get on-line with Firefox. It simply will not open any page. I'm told it cannot make a connection. And yet both Safari and Chrome work fine, hence it is not a connection problem.
Moreover, when I started with Chrome, it offered me the option to export bookmarks, but only from Safari. Firefox never appeared in the import box
I was using Firefox 4.01. I tried to download the new version, dragged it to Applications, but 4.01 remains in situ. I work on a MacBook Pro running 10.6.8

Cannot connect after upgrading Firefox
* https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox
Firefox cannot load websites but other programs can
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can
Check and tell if its working.

Got a refurbished iphone 4s to replace my lost iphone 4, the 4s has horrible battery life, only lasts about 3 hrs even when not in use and it will not update to the iOS 5.1, i have tried four times now, please help

please help

Basic troubleshooting from the User's Guide is reset, restart, restore. Has any of this been tried?

IPad 2 will not update from version 4.3.5 (8L1).

I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!

Naalamc wrote:
It's an ASUS, Windows 8, Version 11.1.3.8
Thank you.
Your iPad has iOS 4... See Here > http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Firefox will not update plugins labeled in red as "potentially vulnerable plugins". Need help.

Firefox will not update three plugins appearing below the
statement in red : " vulnerable plugins". I tried three times, and
all I got was other pages with lots of ads. I need help. Thanks.

Some plugins may need to be removed using the Control Panel, or Windows Explorer, because they are managed by other software or dropped in nonstandard folders. Can you list the three plugins so people can give specific advice on them?
For the RealPlayer Browser Record Plugin you might need to update RealPlayer or use its options dialog to turn off the recording/downloading feature in order to remove this one.

HT201210 My ipod touch 2 gen will not update from IOS 4.2.1

My Ipod 2Gen will not update from IOS 4.2.1 keeps saying this is the most up to date software. Does the 2 Gen Ipod not allow anything higher than 4.2.1. HELP PLEASE!!!!

iOS 4.2.1 is the highest supported iOS version for the iPod Touch 2nd Generation.

My iPhone will not update from version 4.1

My iPhone will not update from version 4.1, everytime I try to update on the iTunes iPhone screen, the response says "your iTunes version is current"....I am not trying to update iTunes, I just want to update my iPhone. How do I fix this?

You must purchase 10.5.8 from an Apple store, either in person or online. You can also update to 10.6.8 (Snow Leopard) if you have an Intel Mac. The current version is Lion, (10.7), but you must have Snow Leopard installed to upgrade to Lion. You also need an Intel Mac.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

Check for updates by running MS Office Update directly from:
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
(Open Finder, ⇧⌘G, paste in the above and click)

I do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

i do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

I used cleanmymac for clean up files, always worked fine before maverick, now i used it yesterday and i can not open any kind of programs except google chrome , my last time machine back up was yesterday but according to him he can restore just complete back up and the last one is in october 2013, i am desperate .
i already tried to fix permits and press weird combos of buttons on restarting. not working.
please help

Lync 2013 Photos will not update from AD

I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs; Replicate this attribute to the Global
Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
"Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"
and finally we are setting the photo in ad using:
"Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
but unfortunately no change on my Client. I still see these users original photos.
Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
More info on the environment:
4 main sites + remote users
~7DC's - 2003 DFL (1 at each site + a few at HQ)
3 Lync Front end servers (2013) (All located at central HQ)
2 Lync edge server (2013) (All located at central HQ)
1 - 2010 Exchange server (Located at central HQ)
2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
About 100 HP 4110 Lync Edition Desk phones
Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

I have a 2010 macbook pro 2010 13.3" laptop that will not update from 10.6.3

I have an Apple macBook pro that will not update at all. It is a 13.3 model the initial load is 10.6.3. The battery is dead as well and the pram seems to not hold as well, time reset even when plugged in on restart. any update leads to the spinning wheel freezing, and i mean freeze even the dvd drive stops working completely. Any ideas?

You can update to higher versions of Snow Leopard by applying the combo updates, anyway. Your predicament may come from the fact that a prior update didn't install properly, and is blocking the install of other updates. You should download the combo updates from Apple's website, and apply them.
You'll find the 10.6.8 update here. You'll still have to apply the various security updates that have been released since, if any.

Does anyone know why my 2nd gen iPod calendars will not update from my Macbook pro starting as of Oct. 20, 2012? I tried restoring to factory settings and genius's did DFR type restore....no results.

As of Oct 20, 2012, my calendars will not load from my Macbook Pro to my iPod. Tried resetting to factory settings and installing just my work calendar... unsuccessful. Genius at my Apple store tried a DFR (?) type reset... still no calendars. All other functions of the iPod is working fine. Any suggestions?

10.8.2. And I have been keeping up with updates, but I thought they all involved fixes to Logic Pro and Aperture (but there may have been an update to OXS...is there any way to see when fixes were released?) The Genius's at our store were stumped and told me to contact Apple.... but without Apple care, I will be charged a fee.... and my iPod is in pristine shape. Is there a way to request Technical support for a problem they are possibly causing?

No matter what I try, Camera Raw will not update from 8.3 to 8.4.1 in PS CC

I've tried completely uninstalling Bridge and Photoshop CC and reinstalling and I'm still on Camera Raw 8.3.
It just will not update.
I also tried the link to manually install and it just says the patch is not applicable.
Any ideas why even after completely removing and reinstalling both Bridge and Photoshop my Camera Raw will not update?
Thanks

When I replied to your post, I was replying to an original post that came in via my e-mail today at 2:30 and was the most recent thing in the ACR forum and had remained unanswered for 1.5 hours, so I decided to reply. Had your post been put in a forum I subscribed to and happen to notice days ago, then I might have seen it, then, but didn't see it until this afternoon, and the e-mail version of your post only had the scant initial information, not the subsequent question and answer about your OS that you'd replied to on the other forum. So as you say, I had not read the thread, because it was on a forum I didn't subscribe to. So be shocked and perhaps awed as is necessary. My treat.
Second, I did make a typo when I said Win8/8/8.1 and it should have been Win7/8/8.1, which might have been deduced by the repeated 8, so you could have asked for clarification.
Seeing as you're on Windows 7 which ACR 8.4 should be compatible with, one minor detail is that I see in the compatible Lightroom 5.4 requirements that it needs Windows 7 Service Pack 1, which would mean you'd want to be caught up on your Windows Updates, which I would assume you'd be.
There are direct links to ACR 8.4(.1) on Jeff Tranberry's blog that are distinct for PS-CS6 and PS-CC so maybe that is what isn't right?
Keeping Photoshop Up-To-Date
You might check what version of PS-CC you have. 14.2.1 is the most current, and maybe that is prerequisite to ACR 8.4.1, I don't know.
If worse comes to worse, uninstall everything Adobe, then run the CS Cleaner then re-install CC Desktop and see what happens as you install PS-CC and it's updates. It may need to be run several times.
Once you're ready to retry your installs, you also might try to Quit CC Desktop and run it As Administrator in case there is a permissions issue.
The CS Cleaner can be found, here:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Firefox will not update to 12 from 8

Application Basics
Name
Firefox
Version
8.0.1
User Agent
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:8.0.1) Gecko/20100101 Firefox/8.0.1
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Crash Reports
about:crashes
Extensions
Name
Version
Enabled
ID
ColorZilla
2.7
true
{6AC85730-7D0F-4de0-B3FA-21142DD85326}
Firebug
1.9.2
true
[email protected]
Html Validator
0.9.5.1
true
{3b56bcc7-54e5-44a2-9b44-66c3ef58c13e}
Web Developer
1.1.9
true
{c45c406e-ab73-11d8-be73-000a95be3b12}
YSlow
3.1.0
true
[email protected]
AVG Safe Search
12.0.0.1912
false
{1E73965B-8B48-48be-9C8D-68B920ABC1C4}
AVG Security Toolbar
11.1.0.7
false
avg@toolbar
Java Console
6.0.29
false
{CAFEEFAC-0016-0000-0029-ABCDEFFEDCBA}
RealPlayer Browser Record Plugin
15.0.4
false
{97E22097-9A2F-45b1-8DAF-36AD648C7EF4}
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
3
browser.startup.homepage
www.google.co.uk
browser.startup.homepage_override.buildID
20120614114901
browser.startup.homepage_override.mstone
13.0.1
extensions.lastAppVersion
8.0.1
network.cookie.prefsMigrated
true
places.database.lastMaintenance
1340965061
places.history.expiration.transient_current_max_pages
128825
privacy.donottrackheader.enabled
true
privacy.sanitize.migrateFx3Prefs
true
security.enable_java
false
Graphics
Adapter Description
NVIDIA GeForce 7600 GT (Microsoft Corporation - WDDM)
Vendor ID
10de
Device ID
0391
Adapter RAM
256
Adapter Drivers
nvd3dumx,nvd3dum nvwgf2umx, nvwgf2um
Driver Version
8.15.11.8593
Driver Date
5-14-2009
Vendor ID (GPU #2)
000e
Device ID (GPU #2)
000e
Adapter RAM (GPU #2)
Unknown
Adapter Drivers (GPU #2)
Unknown
Driver Version (GPU #2)
7.1.542.0
Driver Date (GPU #2)
5-22-2006
Direct2D Enabled
Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
DirectWrite Enabled
false (6.1.7601.17789)
ClearType Parameters
Gamma: 1800 Pixel Structure: RGB ClearType Level: 100 Enhanced Contrast: 200
WebGL Renderer
Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.
GPU Accelerated Windows
0/1. Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.

Our posts crossed, if you do update from an older version it may possibly initially update only as far as 12 and then need a further update to 13
* [[firefox just updated - why is it asking me to update again?]]
It is still possible the main problem is security related software blocking or even reverting changes.
There is probably no need to uninstall Firefox, ordinarily newer versions will install over older versions as will be mentioned in the articles I linked to. (Or ones they in turn link to).

Adobe Reader will not update from 11.0.0.6 to 11.0.0.7

I have tried installing the update to my Windows 8.1 machine, but it fails every time. When I right click and run as administrator from the download, it extracts, then pops up with:
"The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch."
From the Adobe ARM.log, there is an ERROR_SUCCESS that tells me it stayed at version 11.0.0.6.
From the AdobeSFX.log, there is a "Program finished with exit code:1642". (Which just tells me the same thing as the error pop up box.)
From the MSI Installation log there is this:
: Unknown\Absent: {AC76BA86-7AD7-0000-2550-7A8C40011007} - C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AB0000000001}\RDC\AdbeRdrUpd11007.msp
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
C:\Windows\Installer\2f8d0.msi
: Product: Adobe Reader XI (11.0.06) - Update '{AC76BA86-7AD7-0000-2550-7A8C40011007}' could not be installed. Error code 1642. Additional information is available in the log file C:\Users\ADMINK~1\AppData\Local\Temp\MSIcd3b7.LOG.
: Windows Installer installed an update. Product Name: Adobe Reader XI (11.0.06). Product Version: 11.0.06. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Update Name: {AC76BA86-7AD7-0000-2550-7A8C40011007}. Installation success or error status: 1642.
: Note: 1: 1708
: Product: Adobe Reader XI (11.0.06) -- Installation failed.
: Windows Installer installed the product. Product Name: Adobe Reader XI (11.0.06). Product Version: 11.0.06. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1642.
: MainEngineThread is returning 1642
I am testing the update before doing an enterprise rollout to Win8 and Win7 machines. I have tried the standalone update on other computers (Win7 and Win8) and I cannot get it to update.
I downloaded from here: Adobe - Adobe Reader Distribution Selecting Windows 8, English, and 11.0.0.7
From Administrative Command Line:
AdbeRdr11007_en_US.exe -nos_oC:\Users\$$$$$$$\Desktop\Reader -nos_ne
msiexec /a C:\Users\$$$$$$$\Desktop\Reader\Acroread.msi network location: \\$$$$$$$\apps\adobe\reader11_0_0_7\
msiexec /a \\$$$$$$$\apps\adobe\reader11_0_0_7\AcroRead.msi /p C:\Users\$$$$$$$\Desktop\Reader\AdbeRdrUpd11007.msp
This is not working either - which is not surprising considering that the update itself will not run. I can only guess that somehow the 11.0.0.6 update was incorrect somehow, but I have been using the same process to update the machines for more than 5 update cycles, so I am not sure what might have changed.
The point is, I do not want to do a complete uninstall and clean install on all of the machines in the company. Can anyone give direction with this?

I disagree about corrupted install. Every 11.0.6 pc in my enterprise also cannot upgrade to 11.0.7. We make AIPs following the same process for each patch. Something is not right with 11.0.7 MUI. I can create the AIP for 11.0.7 but cannot get the GPO to upgrade previous installations. I think something is seriously wrong with the 11.0.7 MUI msp
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
I am using the 11.0 MUI installer to create the AIP and then I patch the AIP with 11.0.7 MUI .msp file per normal practice like I always do. I am able to sucessfully create the 11.0.7 AIP without errors but none of my 11.0.6 MUI clients will upgrade successfully and are left at 11.0.6.
Something is broken with the 11.0.7 MUI .msp file.
Like I said, we do this the same way each time depending on quarterly update or security update and it ALWAYS works fine. This is well documented. We are following the exact same steps and something is seriously wrong with the new 11.0.7 MUI .msp file. It will not properly upgrade 11.0.6 MUI installations.
We are using the 11.0 MUI as the base for slipstreaming the new 11.0.7 MUI patch.
STEPS:
1. Download AdbeRdr11000_mui_std.zip and extract to temp directory.
2. Run: msiexec /a c:\aip\temp\acroread.msi TARGETDIR="c:\aip\11.0.7"
3. Copy the AdbeRdrUpd11007_MUI.msp patch to c:\aip\11.0.7\
4. Run: msiexec /a c:\aip\11.0.7\acroread.msi /p c:\aip\11.0.7\AdbeRdrUpd11007_MUI.msp
5. Choose c:\aip\11.0.7 as the installation folder
6. When completed Copy c:\aip\11.0.7 to \\servername\AIP\
7. Configure GPO to upgrade over the top of existing installation of previous GPO 11.0.6 MUI using the correct UNC folder
This has worked every time other than this 11.0.7 MUI msp file. It will not upgrade 11.0.6 installations.

My Firefox Will Not Update from 3.5.8 to 3.6 on my MacBook Pro, please help?

Similar Messages

Maybe you are looking for