My Firewire HDD cannot use with Mac Mini

I have Firewire 400 HDD and it work well with my MacBook with firewire 400 port, but when I use it with Firewire 800 + logitech firewire 800-400 cable it not work correctly, sometime It can't see the hdd, sometime It see but I can't copy file from/to my hdd.
I did bring the cable to test with another Mac Mini that brought together it did the same, but when I take it to the store thay can use it with MacPro correctly without any problem.
Can anyone help me to figure it out

What OS is your MacBook running? I have an iPod that kills the FireWire ports on Leopard systems, but works OK on Tiger. When I upgraded my MacBook to OS 10.5.7 from 10.4.11, FireWire went bad with that iPod. It drove me nuts with my new Mini running Leopard.
There are some Firewire interface chips which are incompatible with some Macs, and you can also check with the HDD manufacturer to see if there is a firmware update.

Similar Messages

  • MBA use with Mac Mini

    Can I use the Mac Mini as an external cd drive for my MBA?

    Connect the computers to the same network, insert a CD in the Mac mini, start File Sharing from the Sharing pane of System Preferences, choose Connect to Server from the Finder's Go menu on the MacBook Air, and log into the Mac mini.
    (35587)

  • 75GB IBM HD - use with MAC MINI?

    My wonderful old beige G3 MT is never used any more - still only 9.2.2.
    It contains a 75GB IBM hard drive (?ATA/IDE).
    Could I remove that drive, install it in some kind of case, wipe the disk or reformat so that I could then attach it to my Mac mini (not Intel) as an external HD storage device?
    Could the case/HD connect via FW?
    Could I even reformat/install OSX 4.8?
    Or am I just dreaming.
    G3 MT & iMac & Mac mini   Mac OS X (10.4.8)   Mac mini OSX 10.4.6 & iMac & G3 OS9.2.2

    Sure, you can get a firewire external enclosure for your 75 and you can even boot your mini from it, and maybe get a slight speed increase.
    But with carefull shopping you could probably pick up a new 300 Gig firewire external for a bit over $100 -- and save yourself a lot of hassle and uncertainty.

  • HD monitor suggestion for use with Mac Mini.

    Hello Group,
    Can anyone suggest the best (or good, compatible) HD monitor to use with my new mac mini just purchased (late 2009 model). Can't afford the apple cinema's so I'm looking for a cheaper option to still have HD using HDMI inputs, looking to spend around $200-$300..also do I need to purchase an adapter of some kind?. Thanks so much for any suggestions!

    Although I have no specifics, from various articles I have read
    about the condition, a few things stand out.
    What seems the most prevelant and makes a lot of sense is
    to use a monitor that has a matte finish screen.  Glossy screens
    regardless how you tweek lighting and viewing positions will always
    have some amount background reflection.  It can be so low as to
    not be conciously perceptible, but the eye is still detecting it and
    is trying to correct for it and what is viewed on the screen.
    On the subject of lighting, with the wider spread use of CFL
    lights could be adding more people to the list with this problem.
    The "cycle times" of these can conflict with display refresh times
    causing the susceptable persons eyes to get confused.  The old
    incandescent bulbs had much less of this effect.  
    Screen refresh rate can also be an issue.  With the iMacs and
    the Thunderbolt displays as well, these are fixed and cannot be
    tweeked, atleast not without third party intervention.  With a
    Mini and some other third party monitor, adjusting refresh rates
    can help.
    Environment in general is a major contributor as well.
    So, resolving the issue may not be as simple as just getting
    a different monitor, although matte screens seem to be a
    major help.

  • 2TB Time Capsule or External Hard Drive for use with Mac MINI and AppleTV

    Hi,
    My current setup is I have a 1TB Hard Drive linked to my intel Mac Mini via FireWire 400, the Mini shares my music and films through iTunes so that my AppleTV can pick them up.
    All devices are connected to an AEBS 802.11n (early model) via Cat6 Gigabit cables.
    As I have run out of space and am looking for a bigger drive, I wanted to know if I would be able to use the 2TB Time Capsule to hold my films and be able to stream them to the Mac Mini so that it may stream them through iTunes to the AppleTV.
    The theory of if should work, as the devices are all Gigabit capable and connected by high quality Cat6 leads their shouldn't be network bandwith issues, I am just unsure of how quickly the TimeCapsule can read stored data from a hard drive and transmit, some of my films are HD and run 4GB plus.
    The obvious answers is just to buy a bigger hard drive with FW400, however I would like to reduce the number of boxes I have under the TV, I plan to upgrade my AEBS to the latest one anyway so just thought it made sense to explore this option.
    looking forward to hearing what you have to say.

    Hello,
    It should work in theory, but the disk access time of the TC is much slower. I was setup like you are with an external drive connected to a Mini via FW and I had true Gigabit transfer between computers.
    When my hard drive failed I sold my Linksys gigabit router and bought a TC to reduce the number of boxes, but I soon learned that the read/write speed on a TC is a little bit faster than on a thumb drive! Not that great. All my machines are also connected with Cat6.
    It's still OK to watch a movie though, but transferring 10+ Gb is a pain.

  • DVI to ADC adapter STudio display will not power on when used with Mac mini

    I have a Mac mini and I just purchased a used apple 17" CRT studio display. I bought the DVI to ADC Adapter as recommended by my Apple store. When I hook everything up (I have checked and redone this two times) The power light will come on for about a second when presses. When the mini powers up there is a blank dark screen. I would appreciate any ideas on this. thanks!
    Mac mini   Mac OS X (10.4.1)  

    Hi
    unfortunately I think the Apple store have sold you the wrong item.
    I'm almost certain the DVI to ADC adapter only works with ADC based flat panel displays. DVI ports can output digital or analogue signals (or a combination of the two). The adapter seems to provide digital, which is why it works with the LCD displays, but not analogue, which is why it doesn't work with the CRT displays.
    Confusingly Apple did a 17" Studio display both as a CRT and LCD.
    Dr. Bott do a similar adapter but they explicitly state it's not compatible with the 17" CRT.
    Unfortunately I'm not sure there's a solution, as the display has an ADC connector yet I'm not aware of any adapters available that will work.

  • Which Display To Use with mac mini?

    Is it possible to use an iMac Desktop computer as a display for a mac mini?
    Does anyone have the range of different monitors that can be used as a display for the mac mini?
    Both answers are crucial to buying a mac mini.
    iMac   Mac OS X (10.4.5)   600 MHz Power PC G 3 512 MB SDRAM

    Not directly. You can of course connect to the mini using remote desktop (included with Mac OS - enable it on the Services tab of Security preference pane) and a free VNC client.
    It is not fast and snappy like a directly attached monitor - so you will want to use it ocassionally to make remote changes - not day in and day out display.
    Best to get a display that supports DVI input (or HDMI) and meets your budget. Here are the specs... (it will drive VGA as well - but it's no longer a digital signal and generally less nice)
    DVI video output to support digital resolutions up to 1920 by 1200 pixels; supports 20-inch Apple Cinema Display and 23-inch Apple Cinema HD Display; supports coherent digital displays up to 154MHz; supports noncoherent digital displays up to 135MHz

  • Cannot use my Mac Mini server as Time Machine server

    Hello,
    May some one can help me...
    I try to connect clients to a time Machine server, well it's seems to be a bit difficult, I created user's accounts, computers accounts, group of computers... It works for the update services, but after configuring Time Machine on the server, shared in server admin, in Workgroup manager, file sharing, preference pane, user's services... I can see the volume in time machine preferences, but there is always the same issue, first message is "the disk is not reachable" second "there is a probleme with the network name and password" I tried with different posix, ACLS, with user's password, server admin password, directory admin password... Well I'm a bit tired...
    I tried on the server and on a Promise 4To, I can see the shared items folder and the Backups foledr and that the only thing I can do...
    Well if some one can help me it will be great for me and for every body arround me...
    Thanks,
    Nicolas

    Hello Peter,
    Thanks for your answer.
    There must be something wrong in the different steps I follow.
    Firts I set Time machine on the server for each user, shoosing the Volume "SmartStor" (a network volume attached on the Mac Mini server) it creates a "Shared items" folder with a "Backups" folder in.
    In Server Admin tools I can see in the AFP services the share point /Backups
    In Workgroup Manager I set the Time Machine's preferences for the different computers and computers' group with the path afp://myserver.local/Backups/
    At least on my client's computer I can shoose the volume "Backups" "on my server".
    And it doesn't work... even with all the logins and password, User's, Dir Admin and Server Admin.
    With User's and Dir Admin it runs quickly and tells "the volume is not reachable on account of wrong user's name or password"
    With Server Admin login and password it runs indefinitly, nothing occurs ...
    Is there something to do in terminal ?
    Well I tried to find explanations on the web but I found nothing for the moment... The informations are to set a network volume in Terminal in place of the default one...
    'Hope to find soon, I can't stand that something runs for every one but not with me...

  • What optical audio cable to use with Mac Mini (late 2009) to receiver?

    I want to do the following (removing TiVo for something else is NOT an option, EVER):
    1) I want to watch TV through my HD TiVo (better than sex, better than chocolate, better than sex, chocolate, and anything else you can combine together).
    2) I want to watch DVDs plus iTunes videos plus listen to iTunes audio through my Mac Mini.
    3) I want to have digital optical audio (TOS?) 5.1 dolby for both
    On the Mac Mini it says it has digital audio out. Isn't that the same thing as digital Optical audio out?

    You need a regular optical digital cable, often called a Toslink, with a 3.5 mm miniplug adapter on the Mac mini end. The port is a combo port. When you insert the optical cable's miniplug into the port, because it is a tiny bit longer than a regular 3.5 mm miniplug, it activates the digital audio. Usually the port's output is analog by default.
    Dah•veed

  • What is the brand of optical disk medium to use with mac MINI super drive?

    TDK brand of blank optical disk medium on my mac (super drive) is not reading the optical disk I put in there to burn to. The genius at the apple store put in a Memorex brand of optical disk medium and it worked. What is the consensus for buying blank medium that will work with the .mac MINI super drive it seems TDK doesn't work? What is the brand and type to go with?

    You need a regular optical digital cable, often called a Toslink, with a 3.5 mm miniplug adapter on the Mac mini end. The port is a combo port. When you insert the optical cable's miniplug into the port, because it is a tiny bit longer than a regular 3.5 mm miniplug, it activates the digital audio. Usually the port's output is analog by default.
    Dah•veed

  • Using a Mac Mini with my Mac Pro

    I have a Mac Pro and a Mac Mini, but only one monitor and one keyboard. Can I hook up the Mac Mini so it will appear on the monitor (like another hard drive) when I am using the Mac Pro? I would like to use the Mac Mini strictly as a storage device and be able to drag files from the Mac Pro to the Mac Mini.

    Put the Mac Mini in Target Disk Mode (start while holding "T") and connect it to the Mac Pro with a FireWire cable. If you want it to always start in Target Disk Mode:
    <http://www.macgeekery.com/hacks/auto-bootto_target_diskmode>

  • The best audio interface with Mac Mini using new & existing equipment?

    Hi,
    I got my existing set-up back in 2003. I'm now about to update it.
    I've talked to Apple Technical Support re which computer is best for me.
    Some important questions remain in terms of the audio interface or sound bridge I should use.
    I've detailed below my existing set-up, my existing configuration, my desired set-up (as recommended by Apple expert) and questions I have.
    Existing set-up:
    Hardware...
    1. ViewSonic HDMI 1080p Full HD LED monitor
    2. PowerMac G4 (PowerPC processor) computer
    3. PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
    4. MOTU 2408 mk3
    5. Quested monitors
    6. Focusrite Session Pack ff ISA220 compressor
    7. MOTU micro lite (midi-usb interface)
    8. Keyboard (yet to choose - I'll explain later)
    9. ADK Tube Condenser Commemorative Edition microphone
    10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
    Software...
    11. Tiger 10.4.11 operating system
    12. Logic Studio 8 music program
    Desired set-up:
    1. ViewSonic HDMI 1080p Full HD LED monitor
    2. Mac Mini full spec = £999.00
    3. _______________________________________
    4. _______________________________________
    5. Quested monitors
    6. _______________________________________
    7. _______________________________________
    8. _______________________________________
    9. ADK Tube Condenser Commemorative Edition microphone
    10. ADK Tube Condenser Commemorative Edition microphone power box (supplies both power and phantom power)
    Software...
    11. Top-end operating system = Comes with Mac Mini
    12. Logic Pro X music program = £139.99
    Existing configuration:
    ViewSonic HDMI 1080p Full HD LED monitor goes into PowerMac G4 (PowerPC processor) computer
    PCI-424 soundcard within computer (works in conjunction with MOTU 2408 mk3 unit)
    MOTU 2408 mk3 used as my audio interface for sound in and sound out. This means that the sound comes out of computer via the MOTU 2408 and out of my Quested monitors (they are active so self-powered) which are attached to the MOTU's outputs.
    When I record vocals I sing into my ADK microphone (this microphone sources its own power from its own box which also feeds it Phantom Power) which is connected by a mic to jack cable to the Focusrite compressor which is connected by jack to jack cable to the MOTU 2408 which then goes into my computer via a firewire cable.
    When I play keyboards or use my keyboard as a midi controller it connects to my computer via the MOTU micro lite (midi-usb interface).
    I don't currently have a keyboard. I used to use my basic Yamaha PSR-540 keyboard as a midi controller but as it's not weighted and faulty I needed to get a new one. We got a new one via Thomann which was the M-Audio Pro Keys 88 keyboard but this quickly became faulty. We returned it and have since been considering other weighted keyboards. I am simply wanting a keyboard with Aftertouch, either 76 or 88 keys, weighted keys and very importantly, hammer action where the action is fast. I don't care for other controllers on the keyboard, on-board sounds, iPad compatibility or whatever.
    My Questions:
    Q1) Can you recommend any keyboards meeting my specifications?
    Q2) I can't imagine any of the Blue or other USB mics competing with my ADK and I'm quite happy with it. For vocals and when I've wanted to play the keyboard in as audio (not as a midi controller) I've used the Focusrite compressor to boost the sound. I'm not using many functions/presets on the compressor as I know it's best to record the sound of vocals mostly raw, is this correct, and if so is it worth me continuing to use this compressor or sell it?
    Q3) Do I need to have the MOTU micro lite (midi to usb) unit? Don't most keyboards these days connect direct usb to usb on the computer?
    Q4) I'm happy and used to the sound out from my Quested monitors. I'm happy and used to the sound in using my ADK microphone. What do I need for these to work best with the Mac Mini? Is my MOTU 2408 good for this, or is another MOTU product needed, or another product altogether?
    Q5) Depending on (Q4) do I need a soundcard installed in the Mac Mini as I read on a forum that these days the audio interface acts like the soundcard?
    Q6) I have such a bad connection to the internet it's like I have Dial-up!!! I use Airport Wireless which is connected to a router downstairs, which is 02 Broadband. Internet's not an issue downstairs on my girlfriend's intel PC which also uses a wireless connection but not Airport. Is this a problem because of my Airport, or do I need to get a router for upstairs, or should I connect it directy to the router downstairs by ethernet cable?
    Many thanks!

    Is there a reason you don't want to use your current Tascam?

  • Canon scanner not communicating with mac min using OS 10.5.8

    I am using a mac mini with OS 10.5.8.  I am trying to scan in papers with a Canon Canoscan N1240U.  This is the message I am receiving.
         Cannot communicate with canner.
         Cable may be disconnected.   
         Check status.   
         Scanner driver will be closed.
    I have used this scanner before with this mac mini.  Any suggestions why this is happening and to correct the issue.

    I think you should, if you can, try the scanner on a different computer to rule out a problem with the scanner or it's usb cable. Then, if you have the software install disk for the scanner run it. Or download and install a new driver or software. Use the finder to find and delete any files for the scanner and then reinstall them. set the scanner up in systempreferences as if it's a newly installed item.

  • Can. I use my MAC Mini in conjunction with my iMac?

    Can I use my MAC Mini in conjunction with my iMAC? I can not upgrade the OS of the iMAC due to software that I need and Lion does not support it.
    If I could bounce back an forth or use the software from the MAC Mini with the iMAC, this would solve my dilemma.

    Before I buy a networked drive can I use the airport to connect with an external
    USB drive and set both macs  use the  drive as a time machine
    Can you hook this up? Sure.
    Is is supported by Apple?  No.
    Some users report that this seems to work when they try it.
    Others....like me....have corruption problems anywhere from a few days to a few months after I set up a test....which I do whenever a new version of firmware or a new operating system becomes available.
    We cannot predict your results, so if you decide to try this, and your backups are valuable, you might want to have a secondary backup plan in place as well....just in case.

  • Can you use a Mac Mini to share documents between several devices? iPhones, MacBooks, iPads, etc...? We are a home based business with several locations across the state and are having Google Drive issues, looking into Mac Mini options.

    We are having Google Drive issues (some files won't sync) and it's causing us trouble with our business communication. Is there any way to use a Mac Mini to share documents between two people in different areas similar to google drive? Would this just be done through iCloud?

    If you use Numbers, Pages and KeyNote it si very easy to sync those document among all the Apple devices. You need montain Lion on the Mac  and at least iOS 5 on the mobile devices.
    I show those document on my Mac, iPad 4 and iPhone 4S

Maybe you are looking for

  • Stange problem in deploying  JSF application to weblogic 10

    hi,OTN I think this is the suitable forum for my problem,I had an ADF 10g application which I migrate to Jdeveloper 11g,I want to deploy it to A standalone weblogic server,so I made a Jar file for the model,Awar File for the viewController, and an ea

  • Sample java code for web service calling

    Hello, I need to call the web services for adding/updating records on Oracle On Demand Entities. In particular i need a sample code in java language that explain how to append the sessionid to the SOAP request when calling the web service. thanks in

  • Blank PDF in IE with FOP+Tomcat

    Does someone finally know why PDF generated by FOP are not displayed in Internet Explorer ? (they are displayed well in Netscape, or by opening directly the PDF file with IE on the server) Regards. PS : the problem of the double call to FOP - still w

  • How to include depreciation are in  asset master data

    I have already activated depreciation area in the asset class but it did not appear inn asset master data. How to include it there? Tks, Naej

  • Can I create a custome project setting?

    How do I create the project settings for footage with these properties: 1920 x 1080 47.95 fps? And some of the footage was shot with a 29.97 fps.