My first PC build for video editing purposes

I have done some research into building my own video editing PC. I want to spend about 800 pounds. I will list some of the components I have so far. Any suggestion would be welcomed and appreciated.
ASRock Z77 Extreme6 Intel Z77 (Socket 1155) Motherboard - £159.98
4 x Kingston 4GB 1333MHz DDR3 Non-ECC CL9 DIMM Memory - £12.76 each
For CPU I am going to wait for the Ivy Bridge Core 17 to come out
PNY nVIDIA Geforce GTX 570 Graphics Card with 1280MB GDDR5 PCI-Express
£210.97
I have heard that it does not matter how fast the RAM is but it is more important how much you have. My Mobo can take 2800 Mhz. I have also heard that the graphic card is important when video editing. It acts as a secondary CPU which enhances the performance.
Is all the above information correct?
Thanks
Dominic

I have ordered most of my components for pc build for video editing purposes. Here is the list. Any critism would be welcome.
MOTHERBOARD
AsRock Z77 Extreme6 Motherboard (Socket 1155, Intel Z77, Up to 32GB DDR3, ATX, USB 3.0, 4 x SATA3 6.0 Gb/s, 7.1 CH HD Audio with Content Protection)
£ 145 – Amazon
CPU
Intel 3rd Generation Core i7-3770K CPU (4 x 3.50GHz, Ivy Bridge, Socket 1155, 8Mb L3 Cache, Intel Turbo Boost Technology 2.0)
£ 230 – Amazon
RAM
Corsair CMX16GX3M4A1333C9 XMS 16GB (4x4GB) 1333MHz CL9 DDR3 Four Memory Module Kit
£70– Amazon
GPU
Asus Nvidia GeForce 2GB GTX 670 DirectCU II Graphics Card
£ 350 – Amazon
CPS
OCZ 850W ZX Series PSU 80+ Gold Rated Ultra Quiet Double Ball Bearing Fan and EU Cable (– Pos Probs – cables short especially for CPU. May need CPU extension cables but these are cheap. Also says compatible with Sandy Bridge NOT ivy bridge. Im assuming it is compatible though)
£ 100 – Amazon
BLUE RAY
LG BH10LS38.AUAU 10x Inter
£62.00 – Amazon
CASE
BNIB ANTEC 1200 (TWELVE HUNDRED) BLACK STEEL ATX FULL TOWER COMPUTER CASE £ 120 – ebay
The only thing left to buy are the hard drives. I have decided on a system of a
C: Boot drive 500 gb (7200) for the OS
Pair of drives in RAID 2 x 2 tb
E: Export drive. Single (7200) 3 tb
Somebody suggested to me that I should get SSD. However, am I right in saying that these drives, although fast, are too small for video editing purposes and also too expensive? Perhaps I should wait until they get bigger and less expensive. A future upgrade.
Thanks for any comments in advanced
Dominic

Similar Messages

Feedback request for First PC Build - For video editing (Premiere, AE)

Hey guys. This is going to be my first PC Build, and I've been researching for weeks to put together parts to build a balanced system that is affordable but will still perform solidly. Since I am so new at this, most of this PC jargon is extremely new to me. I would just build it, but for me this is a lot of money, and I want to double check with some more experienced people that this is a solid build before stepping forward.
I've recently started my own videography business, and I need to build something that will allow me to edit and add effects more efficiently. I don't need the best in the game, but I do need to upgrade from my current system. I edit almost entirely DSLR footage. I mostly use Premiere, but am learning AE, and hope to implement it a lot more in the near future. Anyway, if you have time to look it over, I really appreciate any feedback you are willing to give!!
-Does everything fit?!
-Is this system balanced?
-Are there any bottlenecks?
-Anything overkill?
-How upgradeable is it?
-Is there anything worth upgrading now rather than later?
-Also, are there other sites to find these parts cheaper?
Component
Choice
Link
MOBO
ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157293
CPU
Intel Core i7-3770K Ivy Bridge 3.5GHz 3.9GHz Turbo LGA 1155 77W Quad-Core Intel HD Graphics 4000
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116501
GPU
EVGA GeForce GTX 650Ti BOOST SuperClocked 2GB 192-bit GDDR5 PCI Express 3.0 SLI Support Video Card
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130910
Memory
G.SKILL Ripjaws X Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-1600C9Q-32GXM
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231569
Drives
SAMSUNG 840 Pro Series MZ-7PD128BW 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD)
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147192
Western Digital WD Black WD2002FAEX 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive - OEM
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136792
Cooling
COOLER MASTER Hyper 212 EVO RR-212E-20PK-R2 Continuous Direct Contact 120mm Sleeve CPU Cooler Compatible with latest Intel 2011/1366/1155 and AMD FM1/FM2/AM3+
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103099
Power Supply
CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply New 4th Gen CPU Certified Haswell Ready
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139010
Optical Drive
LG Black 14X BD-R 2X BD-RE 16X DVD+R 5X DVD-RAM 12X BD-ROM 4MB Cache SATA BDXL Blu-ray Burner, Bare Drive, 3D Play Back (WH14NS40) - OEM
http://www.newegg.com/Product/Product.aspx?Item=N82E16827136250
Case
COOLER MASTER HAF 932 Advanced RC-932-KKN5-GP Black Steel ATX Full Tower Computer Case with USB 3.0, Black Interior and Four Fans-1x 230mm front RED LED fan, 1x 140mm rear fan, 1x 230mm top fan, and 1x 230mm side fan
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119160

In addition to what cc_merchant has said, my only comments to add would be to consider the new Haswell platform and/or the Nvidia 700 series cards that recently came out.
Depending on how soon you need this machine, it may be worth your while to get a 4770k and Z87 mobo. (You might want to wait for the C2 stepping to hit shelves, as the current C1 offerings have a USB 3.0 bug). I've read that the C2 version should hit shelves early to mid August.
As for the videocard, Nvidia just released the Gtx 760, which would be a much stronger offering for a little bit more money. (Some here might argue that it is overkill for that machine, but I think the future proof aspect makes it worth it).
For the hard drives, below is the hypothetical scenario I plan to go with when I build my system (per Harm's instructions):
C:\ OS, Programs, Windows Pagefile - 128GB Samsung 840 Pro SSD
D:\ Projects and Media - 3TB Seagate 7200.14 HDD
E:\ Media Cache / Scratch - RAID 0, 2x 1TB Seagate 7200.14 HDD
F:\ Misc/Non-Video Editing Hard Drive - 1TB WD Caviar Black
Exports go to whichever drive has space available.
If you're only able to afford one of these upgrades, I would focus on getting the optimum hard drive setup. Right now, that's your bottleneck.
Hope that helps.

I want to upgrade my Power Mac G5 Quad (Mac OS X 10.5.8) for video editing purposes. What upgrades should I make?

Hello!
I want to upgrade my Power Mac G5 Quad (Mac OS X 10.5.8) for video editing purposes.
Rendering,editing and exporting takes some time on my computer. I just want things to go faster.
What upgrades should I make?
Thanks in advance!!!

Here are other video cards that you can search for that will also work in your G5.
NVIDIA GeForce 7800 GT with 256 MB of GDDR3 SDRAM, and NVIDIA Quadro FX 4500 with 512 MB of GDDR3 SDRAM
http://www.amazon.com/nVIDIA-Quadro-FX4500-PCI-Express-631-0110/dp/B004XCYG10/re f=sr_1_3?s=electronics&ie=UTF8&qid=1365657320&sr=1-3&keywords=NVIDIA+Quadro+FX+4 500
or
http://www.amazon.com/Power-Nvidia-256mb-Geforce-Express/dp/B00BL30JQU/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1365657552&sr=1-3&keywords=NVIDIA+GeForce+7800+GT

Advice on Pc build for video editing with Premier Pro

I have recently managed to save up £1500 for a new PC for video editing. The following are the specs I am considering for the build:
Intel Core i7 3770K,1155, Ivy Bridge, Quad Core, 3.5GHz, 5 GT/s DMI, 650MHz GPU, 8MB Smart Cache, 35x Ratio, 77W,Retail
256GB Samsung 840 Pro Series Basic, 2.5" SSD 7mm 3-core MDX, 21nm Toggle NAND, Read 540MB/s, Write 520MB/s
850W Corsair Professional Series Gold 850AX, Modular, 90%Eff', 80 PLUS Gold, SLI/CrossFire, EPS 12V, Quiet Fan, ATX, PSU
16GB (2x8GB) Corsair DDR3 Vengeance Jet Black, PC3-17066 (2133), Non-ECC Unbuffered, CAS 10-11-11-31, XMP, 1.5V
2TB WD WD2002FAEX Caviar Black, SATA 6Gb/s, 7200rpm, 64MB Cache OEM
Pioneer BDR-207EBK Blu-ray Writer Quad Layer 12x BD-R, x8 DVD±DL x16 DVD±R Up to 128GB Retail
Antec 902 Nine Hundred Two V3 Mid Tower ATX Case, USB3, With Side Window w/o PSU
Creative Sound Blaster Recon3D PCI-E Soundcard 5.1Ch THX/Dolby Optical In/Out OEM
Asus P8Z77-V, Intel Z77, S 1155, DDR3, SATA III - 6Gb/s, SATA RAID, PCIe 3.0 (x16), DisplayPort/ DVI-D/ HDMI, ATX
2GB EVGA GTX 670, 28nm, PCIe 3.0 (x16), 6008MHz GDDR5, GPU 915MHz, Boost 980MHz, Cores 1344 +Free to Play Bundle
Edimax EW-7722PnD N600 Wireless Dual-Band PCI Express Adapter Dual 300N
Microsoft Windows 7 Professional 64 Bit SP1, Operating System, Single, - OEM
I have been advised to get a full size case rather than a midi. Any other advice would be greatly appreciated!

The advice to get a bigger case is correct. That GTX 670 will be a very tight squeeze inside that Antec 902 case due to the way the interior of that case itself was designed: The hard drives will interfere with the motherboard's expansion slots, restricting the length of those cards that will fit to only 9.5 inches long. Unfortunately, although a reference GTX 670 is about 9 inches long, higher-end GPUs will not fit if the PCI-e x16 slot is inline with an installed hard drive.
Speaking of the GTX 670, it is clearly overkill on any system that's equipped with only 16GB of RAM total. Plus, you will need a third-party CPU cooler in order to perform any overckocking whatsoever of the CPU. Unfortunately, the Corsair Vengeance heat spreaders are extremely tall (over 50mm high!) that they will prevent proper installation of any decent tower-style CPU air cooler, especially if all four DIMM slots on the motherboard are being used. You will need 32GB of RAM plus at least a good third-party CPU air cooler such as a Cooler master Hyper 212 EVO (and overclock the CPU to over 4.0GHz) in order for that system to utilize anywhere near the performance capability of the GTX 670.
Third, you do not need that particular Sound Blaster card at all: Its sound quality is surprisingly poor for a such a pricey discrete add-on sound card (or put it this way, it does not sound anywhere close to sufficiently better than on-motherboard audio to justify its cost).

New computer build for video editing, daily use of Premiere Pro, what do you all think ?

I'm building a new PC for using video editing softwares with because my old one is getting tired. I'd like to know what people think of that configuration. I plan on using this computer with the latest versions of After Effects and Premiere, i'm also beginning to learn Cinema 4D.
ASUS Sabertooth Z97 MARK2
Corsair Vengeance 1866 DDR3 RAM (4x8gig)
Barracuda 2TB (x2)
Intel Core i7-4790k Haswell Quad Core 4.0Ghz
EVGA GeForce GTX 780 Ti Dual 3GB w/ EVGA ACX Cooler
Cooler Master HAF 932 Case.
Power Supply ? Dunno what's good and durable here, care to help me what to choose ?
Those things combined are pretty much maxing out my budget so i'm open to changing something for something else if it's worth it and not twice the price of it.
Thanks !!

Lots of information at Tweakers Page
Power supply I would use Cooler Master V850 - 850W Power Supply with Fully Modular Cables and 80 PLUS Gold Certification …
Or Cooler Master V1000 - 1000W Power Supply with Fully Modular Cables and 80 PLUS Gold Certification … if you plan to add more hard drives in the future

Need advice on getting macbook for video editing purpose!

Hi!
Was thinking of getting the macbook to do some video editing stuff so would appreciate valuable advices for those who have done it before. Was thinking that I will upgrade it to 2gb and a bigger hdd when i purchase it.
Is it slow on the macbook? Anyone tried using adobe premiere or final cut pro on macbook? Heard that battery is draining very fast on macbook also? Care to share?
Thanks.

Hi mackie,
In addition to 777iPod which is correct that my external DVD burner is faster than my macbook optical drive, I also use it for Dual Layer media if I need one, since my original macbook didn't come with one.
Also I use the lightscribe etching program to etched the top surface of my dvd disk project.
And my internal HD is 100 GB (7200 rpm), after I replaced the apple standard and my external HD is 500 GB Lacie D2 and Lacie Porsche 160 GB.
And if I'm not mistaken, adobe already stop developing premiere on mac platform, so if I'm right, the last premiere will be for Power PC and it will struggle using it under mac intel using rosseta.
You can use new premiere version on boot camp xp if there is none available for mac.
And here is a nice toy to play if you haven't got one:
http://www.contourdesign.com/shuttlepro/
Good Luck.
ps: I guess most poster suggest you to consider macbookpro and it is not a bad idea.

Thinking of Building/Buying a PC for Video Editing?

If one is thinking of building, or buying a PC for video editing, Harm Millaard has published an ARTICLE in the Adobe Hardware Forum. He has arranged it such that one can rather pick and choose from three levels of system - beginner, intermediate and full-blown advanced pro-level rig. There have been some advances in hardware, since the article was first published, but with the discussions that follow it, much has been updated.
Harm approaches the computer from the eyes of one using PrPro, but with the exception of the GPU requirements for the Mercury Playback Engine (MPE), PrE will benefit from his suggestions. Be sure to follow all of the links that he offers in that rather longish thread.
Also see his other NLE PC ARTICLE, and his storage requirements ARTICLE.
If one is considering a RAID setup, his RAID ARTICLE will prove very useful.
If one is considering working with external HDD's, then this ARTICLE should be useful.
Hope that this helps people, who are considering a new computer for video editing.
Good luck,
Hunt

Harm Millaard has written an update to his computer ARTICLE, and there is some good discussion in it, as well.
Hope that this helps someone.
Hunt

I would like to build a desk top computer for video editing, business management and online learning and also have a small compatible laptop or tablet or ipad to take to university, Can someone please advise me of the best set up for this?

I would like to build a desktop computer for video editing, business management and online learning and also have a small laptop, tablet or ipad to take to university, Can someone please advise me of the best set up for this?

Let's see if I understand this... You're asking for advice on building a desktop computer, in the Apple developer's forum? Why not just buy a Mac?

Want to build a video editing machine for Premiere Pro CC

I will only be using this machine for Premiere pro CC.I would like you guys to have a look at the specs I have chosen,give your suggestions:
i5 4th gen 4670K 3.4 Ghz LGA 1150 (Keeping in mind the benchmark tests found on this site for CC)
Ram Corsair 16 GB Corsair DDR3 @ 1333Mhz. Either 4GB x 4 or 4GB x 2 + 8GB X 1.I already have 8 GB of ram so I am stuck with 1333Mhz.Will this really matter? is 1600mhz better for video editing ?
Motherboard has to be in MSI as I had bad experiences with Asus and Intel original.I am confused about the chipset though..Has to be Z series right??
HDD - 2TB x 1 @ 7200rpm Seagate
1TB x 1 @ 7200rpm Seagate I already have the HDDs from the last machine.
Graphics Card - Within 12k INR.No choice in particular though I had good experience with Sapphire AMD 6670 AND R7 250. I hear AMD is no good for video editing?is it true?
Prefrences- Saphire for AMD
Zotac for Nvidia
Please recomend me a PSU.What shoud be the wattage? Also, need some guidance for buying a UPS.Have this one as of now:
http://www.snapdeal.com/product/zebronics-power-ups-u111/653520?utm_source=earth_feed&utm_ campaign=21_56&utm_medium=101239537
psst- Do I need a cooling option if I am not running this machine in an air conditioned room?
As for the OS is Microsoft Windows 8 / 8.1 SL OEM 64 bit ok ?
I am also looking to buy a Full HD monitor under 12K INR.
Thanks a lot in advance !!

The new Haswell E CPU is out now. THAT is what you want for a new editing machine. ESPECIALLY for heading into the future, which will involve 4K and other, maybe more DEMANDING codecs. SEE Eric Bowen's posting here on this forum regarding the test results for video editing using the Haswell E...vs. the older CPUs.
The Haswell E now has a new chipset,( X99), that brings MANY new features, AND, the Haswell E NOW features "quad channel" memory...to handle large amounts of data FASTER. The new motherboards have TEN SATA III ports, for a variety of HIGH SPEED storage options !! The OLDER motherboards are LIMITED to TWO SATA III ports.....PREVENTING creating FAST onboard RAID setups. The Haswell E is available with EIGHT,or, SIX cores...you choose !! Use at least 32 GB of system memory. Soon, Eric will post the results of the new Nvidia 970 and 980 video cards. in his video editing test. The 980 is ALREADY the top card in GAMING...BEATING the 780ti, DESPITE having LESS data throughput. The 980 MAY be the card you want....it is MUCH cheaper than the 780ti......down in the $500 plus range.
Use the new Samsung 850 Pro SSDs in your new system...or, the cheaper Crucial M550 series SSDs. The SSDs are now WAY more reliable than HDDs and are WAY FASTER, in many ways.

Need advice on purchasing an external hard drive for video editing

Hi,
I looking for advice on which external hard drive to get. The main purpose for the hard drive will be storing video files on for use with Final Cut Pro. I have the 12 inch powerbook G4 so I plan to use the FireWire (400) port to connect the drive. I'm interested in getting comment from others who use their external hard drives for video editing.
Thanks!

Firstly your decision to use FireWire is a good one, as not only will it free up the USB it performs much better on sustained transfers.
That said you're still limited by the FireWire interface, so opt for a drive with a big cache (16MB would be good) and fast spindle speed (7200rpm+).
Some of the newer enclosures are compatible with SATA drives. While these are easier to install and theoretically will perform better, I'm not sure that the performance would justify the extra cost.
Matt

Need advice on new mac for video editing.

Hello! I'm throwing $4,000 down on a new iMac to use for video editing and various other design purposes. I'm maxing it out with a 3.75ghz quad core intel i7, 32 gigs of ram, 4 gigs of video ram and a 1t sold state hard drive. With being a creative cloud subscriber and updates being rolled out constantly, as a video editor do you think i'll get at least 5-7 years out of this mac. I also do 3d animates with after effects and cinema 4d. Thanks! Any advice and feedback is greatly appreciated.

I made last updates to PC configuration (updates - bold) and soon going to buy. So... maybe final check:
CPU: Intel Core i7-3930K 3.2GHz
Cooler: Corsair Hydro H70
MB: Asus P9X79 PRO
RAM: Corsair Vengeance Black 16GB (4x4GB) DDR3-1600 CL9 1.35V XMP1.3
Video: Asus GTX670-DC2-2GD5
HDD: Samsung 830 Series 128GB SATA3 520/320MBs (system disk)
2 x Seagate Barracuda 2TB SATA3 7200RPM 64MB (scratch/cache/render disk) *
PSU: CORSAIR AX850 80+ GOLD
DVD: LiteOn BD-RE iHBS212-32
Case: ANTEC P280
OS: Win7 Pro OEM
RAID: G-SPEED eS (RAID 5, projects/media)
* Due to a limited budget, at the beginning I'll use HDD's in non-RAID configuration or will build RAID0 based on MB RAID controller

Thinking to buy a new 15inch macbook pro retina display. Aim to use it for video editing and compositing... Is ıt worth for it?

Hi... I am a freelance filmmaker. Now I have 2008 model mac pro and I am thinking to buy a new macbook pro 15 inch retina display. Do you think its worth for it? I aim to use the macbook mainly for video editing, video compositing (after effects) and photo editing. My current old mac pro has 12 GB and the graphics card is ATI Radeon HD 2600 XT 256 MB (Yes I still use it). My main question is, do you think its better to move to macbook pro or upgrading the old one? Making it 32 GB of RAM and buy a new NVIDIA cuda capable graphic card? I dont have enough budget to make it together... Want to hear your suggestions...

I'm not sure, I've seen pro animators use MBPs but usually with a large monitor. Especially doing video editing, compositing and editing it might make more sense to upgrade the Mac Pro to an SSD as the boot drive. What kind of CPU setup is in your Pro?
Check these out:
mac pro SSD upgrades?
SSD as system disk while users folder + data on HDD
Early 2008 8-Core Mac Pro GPU Upgrades
I deal exclusively with OWC. I'd call them and walk them through your system and see what they say.
What you do takes a lot of CPU, RAM, graphics and boot disk power.
I've upgraded my two computers to SSDs and the first thing I noticed was that Photoshop CS6 opens in 7 seconds vrs. 50 seconds when the application was on a HDD.

Which do you think; Windows 7: 32-bit / 64-bit, (plus unused RAM issues) is best for video editing?

Hi there!
Just received delivery of a Lenovo G550 with the following spec:
2.2Ghz Core 2 Duo,
4GB (DDR3 - 1066Hz) RAM,
500GB HDD
NVIDIA GeForce G210M (512MB)
Windows 7
The entire purpose for buying this laptop, was for video editing and it is the best spec I could find for my needs and budget.
So what's the problem?
1) Windows 7 is installed as 32-bit, not 64 bit. Why is this? I was given no choice in this decision.
2) Only 2.96GB of that juicey RAM is being used by Windows 7. I need as much RAM as possible for video editing.
3) Lenovo sent NO install disc. - When I eventually get a virus or my HDD fails, I have NO WAY to clean install the very product I have just purchased! (A laptop with Windows 7 OS).
Considerations:
As I understand it (please comment if there are alternative views on this); The 64-bit architecture is only useful for compatible software which has been designed to run 64-bit.
The video editing software I use is "Sony Vegas Movie Studio HD 9.0"
The suggested problems with Windows 7 run as 64-bit include:
* Possible lack of driver compatibility support.
* Possibility of 32-bit programs running SLOWER in 64-bit environment, than their native 32-bit environment.
* Higher running temperatures & processor cooling issues.
* No performance gains for all other programs running as 32-bit (email, internet browser, etc).
The suggested advantages with Windows 7 run as 64-bit could be:
* Full utilisation of the 4GB RAM. (Presently limited to 2.96GB)
* Faster rendering and video editing tasks in 64-bit environment.
Questions:
4) How can I get an install disc for Windows 7? Shouldn't this come with the computer?
5) Do you think the potential hassle and architecture conflicts are worth suffering, to get the reported performance gains of 64-bit architecture and the remaining unused RAM?
Thank you for any help and advice!

contact lenovo support line for windows 7 dvds, but make sure if they send recovery dvds instead of windows 7 dvd.
most of people are having trouble with installing windows and drivers, so companies has found as this as solution to send recovery dvd -if asked- or using hidden partition to recovery system - like one key recover - instead of.
but if you ask me, they need to send dvds.
i'll contact the mods and admins about this issue, please stay connected to this post.
anyp wrote:
the member should contact lenovo, as of recently users are entitled to request media for 32 / 64 bit if they purchased one and want the other.

Which G5 for Video Editing?

Hello, I've decided not to wait for an Intel MacPro, but would like to buy a G5 in the next 5 mos (by July) for standard-definition video editing using FCP 5 Studio. I have a few questions:
1) Currently, I have a Quicksilver G4 with dual 1 Gz, 1 Gb ram and 160 Gb ATA drive. Would FCP 5 Studio work effectively on this machine (for editing, color-correction, motion graphics, rendering to DVD etc)? If not, is it worth investing more money into this machine, or should I switch to a G5?
2) Which G5 would work effectively for my purposes? Kindly advise on clock-speed, RAM, Video card, hard disk etc. I take it I will not need RAID for SD, but only high-definition? I would need to use this machine for at least 3 years. Do you see Apple discontinuing hardware or FCP support for this platform during this time?
3) How would the 23" screen be for video-editing? Are there any rumors about a 25" screen replacing it?
4) Lastly, are there any Apple conventions in the next 6 mos (where new products could be announced), which I should wait for, before purchasing?
Thanks for your advice!
G4 Quicksilver Mac OS X (10.3.5) Dual 1 Gz, 1 Gb Ram, 2 x 80 Gb ATA

Hello, I've decided not to wait for an Intel MacPro, but would like to buy a G5 in the next 5 mos (by July) for standard-definition video editing using FCP 5 Studio. I have a few questions:
Get a Quad and get one fast, with a PPC machine you'll have lots of media copying freedom as you have control over your hardware. With the new EFI Mactels, trusted computing and HDCP coming you will not.
Actually I wouldn't waste money on a PowerMactel machine until the whole "Blueray/HD-DVD" thing gets straightened out too, that's going to have a lot of baggage associated with it. When they do at least you'll have a Quad to be able to do things you won't be allowed on the PowerMactel w/BlueRay.
Standard definition is going "bye-bye" in the US mandatory by 2009, mostly by 2007. You'll need to go HD as all the new TV sets being sold are HD/digital ready and all the content will switch as well. (HD Is really nice too, but eats hard drive space fast)
1) Currently, I have a Quicksilver G4 with dual 1 Gz, 1 Gb ram and 160 Gb ATA drive. Would FCP 5 Studio work effectively on this machine (for editing, color-correction, motion graphics, rendering to DVD etc)? If not, is it worth investing more money into this machine, or should I switch to a G5?
Yes sure, but if time = money, you'll need CPU muscle to render faster and large RAM to burn faster.
I say get a PPC Quad, a large stock drive with 16MB of cache and a Western Digital 150GB 10,000 RPM RaptorX for a boot/app and "bare bones" home drive, keeping your video on the large stock drive. Get yourself 4Gb of RAM or slightly more, install it yourself and save money by visiting Crucial.com. (no comp)
2) Which G5 would work effectively for my purposes? Kindly advise on clock-speed, RAM, Video card, hard disk etc. I take it I will not need RAID for SD, but only high-definition? I would need to use this machine for at least 3 years. Do you see Apple discontinuing hardware or FCP support for this platform during this time?
Apple will support PPC based hardware for a long time, so will a lot of third party software makers because it's the majority platform. Not much software is available for the Mactel based machines, so PPC and the Quad is the best longterm professional choice at this time. I would also not get the stock card but the next one up.
RAID you can play with later, rolling your own mini-raid set or if you have volume and require speed then a X-RAID.
3) How would the 23" screen be for video-editing? Are there any rumors about a 25" screen replacing it?
I had a 23", it's small, but it will do the job. A couple of inches increase won't make much of a difference IMO. If you got the bucks get a 30", it's awesome and better than two monitors as you don't need to turn your head back and forth. Just sit back and take it all in.
Of course for standard video your going to need a standard monitor anyway for previewing.
4) Lastly, are there any Apple conventions in the next 6 mos (where new products could be announced), which I should wait for, before purchasing?
We just had one, Macworld, where the Mactels were announced, supposely Intel will release a 64 bit dual core around September, Adobe Photoshop supposely won't be ready with a Mactel version for another 14 months it's been estimated.
Apple is working on universal versions of their apps, some are ready already.
http://appleintelfaq.com/
A site that be of interest to you is HDforIndies.com
I always advise people to clone their boot drives
http://homepage.mac.com/hogfish/Personal11.html

Mac Pro for Video Editing?

So I have an awesome Mac Pro computer at work all well equiped with all the bells and wistles for video editing and now I'm looking to upgrade my machine at home which is currently just a macbook pro with a second monitor.
My one concern is that the Mac Pro has not been updated in sometime. Obviously the mac bro route would be best for me being in video production so I can easily upgrade component with the never ending technology that keeps changing. Now the concern about buying a Mac Pro right now is the possibilites of it being upgraded. Now I understand things are obviously always being upgraded and things are never up to date for very long. However I'm concerned that if in like 3-4 months they came out with something and changed the decision that I maybe screwed for upgrade components along the way.
Just thought I'd get some insight from some of you and what your suggestions maybe?
Thanks in advance.

budget, time-line, stomach for 1.0 revamp (every new model, 2012 could be 3x), lack of Rosetta of course.
production never = bleeding edge, go for a mature well tested proven design - expect to see firmware change, compatibility issues, and 3-4 months for a unified build and drivers rolled out, no?
a nice $2200 "hold me over the hump" for the next 6-12 months for now, W3690/X3690 DIY (the w3680 3.33 6-core is mere $620)
no easy answer that I see with all the products Intel has on their plates.

My first PC build for video editing purposes

Similar Messages

Maybe you are looking for