My flash animation does not work on all computers

this link
http://www.noordanus.co.nz
works on some computers but not others are seeing this:
Clients say they have uploaded the lastest flash player. Just a bit stuck here
Thanks in advance
Spiralvista

Since Flash Player sits on the client side, you may need to install the various Flash Player versions on your computer; older FP versions for all platforms are available at http://kb2.adobe.com/cps/142/tn_14266.html
Maybe other Flash content developers have some better ideas how to test Flash objects on different FP versions; try asking in the Flash or Flex forums.

Similar Messages

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

InDesign DPS: Simple animation does not work in folio?

I'm building a simple recipe app using InDesign CS6, using the Digital Publishing tools.
On one page I applied an animation, "fly in from bottom" to an object.
When I eventually build the folio and view it on my ipad with the Adobe Content Viewer, the animation does not work on that page.
I've watched a couple tutorials on how to use the animation tools, how to set the path, etc. but none of them mention any other steps for getting the animation to work once you build the folio.
Am I missing something?
Thanks!
Bruce

Okay, I'm gonna try helping out on this.... I don't think layers have any effect on this, or at least I haven't noticed they do, the just help keep you organized and maybe for arrangment...
So....
You can just lock the background, it isn't involved, it is just the background.
1. Make your button to open/start the sequence and make your finished state and an empty box. In this case the button the button is just a text frame. The finished state is a shape, text frame and two lines grouped (to make an "x" for the close button). In your case it will be your image sequence and the button to close it. Have all the elements of the finished state grouped.
2. Select both groups. In the object states panel, hit the new button. you should now have a multistate object with two states. One empty state and one state with your sequence, etc..
3. Now select your open button. In the button panel, choose the add action button "+" and choose Got to State (or go to next state) and make sure the object is the multistate object you just created. For the state, choose the state with your sequence.
4. Now select your multistate object. In the object states panel choose the state with your image sequence and close button. Select your close button. Go to the buttons panel and add an action to go back to the empty state.
Test it out, it should work fine now. I don't have an image sequence handy, but you may have to mess with the autoplay settings, etc. but it should work just fine.
Notes of interest: As buttons display only as raster on an iPad, I find it best to make a clear button on top of the button graphic. That way the button can be vector. and the clear box becomes raster.
I really, really reccomend watching some of the videos on Adobe TV, they explain and review a bunch of this. Also, there is an app called DPS Tips App by Bob Bringhurst for free on the Apple Store, he explains all the goodies quite well. You can also use Wallaby to convert indesign animation to flash and then HTML5, but that gets more complicated and it can also have a load delay. Good Luck!

Java does not work at all upon using the update manager to update to firefox 3.6.10 for Ubuntu 9.0.4

OS: Ubuntu 9.0.4
Browser: Firefox 3.6.10
upon updating to firefox 3.6.10, java does not work at all.
websites that use java do not work at all anymore, when they worked just fine before the updating thru update manager. e.g. hulu website cannot play any of the shows.
i can give the folder of bookmarked pages i tried.
how to do that on here, i've yet to see if possible.
i can even give saved text from the terminal concerning certain attempts.
when i updated thru update manager, it gave some weird java plugin that wasn't there before "The IcedTea Web Browser Plugin IcedTea6 Java Web Browser Plugin (execution of applets on webpages)".
i uninstalled this as instructed by an answer found in one of the pages i saved, cuz it was conflicting w/another java program the updater said i needed. right now, i don't remember for sure what it was. it perhaps was realplayer flash or Java itself. w/all the hours/days of searching i put in, it's difficult if not downright impossible for me to remember all the specifics of what i tried.
i've searched throughout many webpages (including many searches on mozilla, ubuntu, java, etc) for instruction in fixing the problem.
oh, and incidentally, on the Java site, when i try the verify test of Java, firefox pops up with that yellow bar right below the slew of tabbed website windows, giving the statement "additional plugins are required to display all the media on this page. (w/link to) install missing plugins ." which is what i do, go thru the requesting plugin installation. it comes up with, guess what, the IcedTea Java Plugin. i click on the 'next' in the "Plugin Finder Service" box that pops up, & all it gives me is "No plugins were installed. IcedTea ...Plugin failed. and the link 'find out more about plugins or manually find missing plugins'". the link takes me to some of the very things/plugins that wouldn't install in the first place. the Java test failure is a LOL funny, as what plugin it is saying is required (IcedTea) is a recommended alternate program to display the very test in the first place.
i followed the given instructions on those many searched pages, in every case (barring what i may have just plain missed), but to no avail.
i've even gone to the point of trying to reinstall the previous 3.5.13 firefox version, from mozilla site. even that wouldn't install.
i've tried installing Java for my sys direct from it's site. nada.
now it's time for me to post the problem & perhaps someone will come up with some kind of "dummy" way to fix it.
until then many sites a regularly use are totally useless to me on this fast puter.
the only way i can get to use such sites, are two choices: 1. use a dinosaur laptop, which is slower than molasses & cannot handle to any streaming stuff, or 2. use an available internet access puter at the library. but useage for ea person per day is limited to only one hour a day. and one can end up waiting for an hour or more ( in the busiest periods) to even get to use one.
so, is there anyone at all, who knows any for-sure working fix for this problem?
thanks muchly :^D
p.s. i can't pay anybody any money for such help, as is required in certain sites (e.g. Java website), cuz i don't have any.
i can pay in labor tho, if there is someway to find someone who can physically be at this puter w/me, taking me step-by-step
sorry for the 20-pg essay. i hope it was all clearly understood. if, not, well, clear communication is always what is needed, ask away.

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

Flash player does not work in Windows 8 tiles

Flash player does not work in Windows 8 start metro tile applications. Flash player also does not work in Windows 8 start tile internet explorer 10 1n windows 8. Flash player does work in Windows 8 desktop internet Explorer 10. I tried all of the recommended fixes suggested by adobe Flash Player Issues/windows 8 page. I have reinstalled Windows 8 operating system. What should I try next?

This is a known issue with Flash Pro CC - GM build.
this crash has been fixed in the update that was released recently. Please update to 13.0.1.808 version and it should fix this.
Please reply if it still persists after the update.
-Sujai

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

Has anyone been able to contact Adobe to learn why their Flash Player does not work on Mac OS 10.6.8, no matter how many updates you install? This seems like a big error by Adobe.

I have thee Mac computers with Mac OS 10.6.8, one of which is a Mac Pro. No matter how many updates I install from Adobe, their Flash Player does not work on any of these 3 computers. I don't know how to contact Adobe Systems about this problem, but I think it is their responsibility to make sure that their so-called "universal" software works proplerly on a relatively recent operating system like OS 10.6.8 that is still in widespread use. When you install the updates, nothing happens -- not even an error message. What is the point of a universal player that is not universal? It works fine on my MacBook Pro with OS 9 Mavericks, but it does not work at all -- indeed, has never worked -- on my 3 Macs with OS 10.6.8. Has anyone contacted Adobe Systems to find out why the Flash Player does not work with OS 10.6.8 and what they plan to do about it?

Where are you getting Flash from?
Get the appropriate dmg installer here and then run it.
http://www.adobe.com/products/flashplayer/distribution3.html
If it still won't install, do these two things: First uninstall any Flash by going into the second level Hard Drive Library>Internet Plug-ins, and trash the Flash Player.plugin and flashplayer.xpt. Then boot into Safe Boot, Shift at the startup chime (give it much longer than a usual boot) and run the installer while booted in Safe Boot.

XP windows restore does not work yet all is set correctly

XP windows restore function does not work. All the restore points exist with descriptions of the changes that prompted them. It will let me select them (restore points) and restore process will strart but after rebooting it will ultimatly let me know that it could not restore.
Does the Lenovo Restore and Rescue utility disable this function of XP ? ?
Thanks

Well I have a 6460-8WU that came with Vista and I got the downgrade CD set and tried to restore to XP. The first time it said it failed to restore my system, but it seem to have XP and all the applications that I expected to see. Later I had a problem with the Welcome Windows screen being unavailable... used only the Classic Windows Logon, I called Microsoft and they suggested using their system restore.... which didn't work at all... I tried 5 or 6 different backup files from different days and none of them worked. At that point I decided to use the Lenovo downgrade CDs and format the hard drive restoring everything from scratch. It took me a few tries but eventually I did get it to say that it had successfully restored my system. The items I learned from like 4 failed attempts to restore it are this:
1. Don't try to restore it while in the advanced dock.
2. When the restore process says to remove Disk # x and press OK, remove Disk # x-1 (the currently inserted Disk, and insert Disk # x, and then do not press OK until you wait 20 or 30 seconds or until the little icon of a CD that flashes when Windows reads a newly inserted disk has finished. When I tried clicking OK either before I had actually inserted the next CD or too soon after I had inserted the next CD the process went downhill from there and failed to restore properly.
3. When it seemingly has read all the CD's and says it will now start the restoration process, but you are asked to press Next... well firstly there *is* no Next button to press and the other buttons other than Cancel are greyed out. The solution there is to wait, and wait, and wait... so long that you may think the process has failed and the computer is hung... but it is not. Eventually it will continue from that point.
Aside from that, I notice that there is a new version of the Recovery Application on the Support site, but
if you install the latest Rescue and Recovery 4.20.0511.00 in the readme there are 31 "considerations" listed, which are basically conditions under which it does not work properly or as expected, so I won't be trusting it to recover my system. I will make a Paragon Drive Manager image after I get the updates all installed and use that to restore from.

Flash Animation Does Not Refresh

I've created a Captivate demo that has an animated flash
segment in the middle of it. This demo was developed for a trade
show and was designed to loop so it can run automatically
throughout the day. Plays great through the first pass. Problem is,
after it has run once, the flash animation does not refresh and
play. Only the blank slides are shown. Same thing happens if you
play the demo then try to rewind to play one of the animated
sequences.
If I hit F5 to refresh the browser it plays. How can I get
this animation file to refresh automatically so it does not require
human intervention to refresh?
Thanks!

Do you have your last side set to go to slide 1 as your way
of repeating? Try setting it to open other project and just point
it at itself, this will make it reopen the project from scratch
(set it to open in the same window). It will have to reload of
course, but should work as designed.

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Flash Player does not work in my blog

Flash Player does not work in my blog This is my blog :
<a href="http://la-fitness-hours.blogspot.com">la fitness hours</a>
http://la-fitness-hours.blogspot.com

This has nothing todo with Acrobat Javascript.

My flash animation does not work on all computers

Similar Messages

Maybe you are looking for