My flash banners won't work since upgrading to FP11

I created two websites with fade in fade out photo banners in a flash file, since upgrading to the latest flash player, they don't work,  any ideas why?

I also have problem with display of swf files but with gradients exported from Illustrator or Freehand.
https://bugbase.adobe.com/index.cfm?event=bug&id=3024322

Similar Messages

  • Flash Player won't work since upgrade - Help!

    My husband & I have both recently had Flash Player  upgrades - mine to 10.3.181.35 and his to 10.3.181
    .34. Since the upgrade, neither works. Video seems to start but then freezes after a few seconds, then start, then freezes
    and so on - what to do ? 

    hey i am also experiencing the same problem from the past few days. I upgraded to the same version , but it's not working properly. I was trying to watch the trailer of the latest movie Rise of the planet of the Apes online, but it was showing some kid of error and it was not working. Please help me too, As my work is pending duw to this.

  • Quicktime broadcaster won't work since upgrade to Tiger!

    this is probably the worst experience i've had trying to get support from Apple. nothing remotely resembling my problem is anywhere in the knowledge base. here's the deal...
    i used broadcaster every week prior to upgrade without any problems...NOW...i am unable to "enable video stream" since upgrading to Tiger. All I can broadcast is audio.
    I EVEN have AppleCare support for my computer but Apple still won't help me!!!! I spent all day on this and need it to work TOMORROW MORNING! didn't expect any problems since it worked fine before.
    Signed,
    A disappointed customer who has used Apple Computers for 20+ years!

    Okay....after a few more hours I decided to reinstall Quicktime Player and then re-enter my quicktime Pro registration key. Now it works. I'm still disappointed that Apple wouldn't help me with this though. Not the service I'm used to.
    So...quicktime broadcaster users be advised of this need to reinstall quicktime after upgrading to Tiger. It wasn't just my g5 that was affected...I checked it out on my g4 powerbook and also had the same problem.

  • My itunes store won't work since upgrade to version 8.0

    My itunes store will not work since I upgraded to v8 I don't know what the problem is. Can someone please help me!!

    The #1 culprit for that is Norton security software.
    Here are Norton directions
    http://service1.symantec.com/SUPPORT/nip.nsf/0/7fb6e478e2a1abf78825708b00558625? OpenDocument&seg=hm&lg=en&ct=us
    If you don't have Norton, check whatever other firewall/security software you are using.

  • External drives won't work since upgrading to Lion.

    This is a really frustrating problem.  I have two portable external hard drives that have both ceased to work ever since I upgraded to 10.7.  These are both used for large video files and I need them to work as they have some important stuff on them.
    One is a 1TB WD MyPassport, USB connection.
    The other is a 500GB Seagate FreeAgent, FireWire 800 connection. 
    The drives are both giving me the same weird phenomenon:
    I plug them in, and they'll boot up--sometimes right away, sometimes after several minutes--but then they make my Finder worthless.  The files won't preview in Cover Flow, and expanding a folder takes forever. When I try opening a video file in QuickTime, I end up with the beach ball of death.  I try restarting the computer, but I can't even do that because "Finder (Not Responding)."
    So I tried manually shutting down by holding down the power button.  When I restarted the computer with the drive attached, the Finder wouldn't launch.  The dock would appear, but no icons on my desktop whatsoever.  When I unplug the drive, once again hold down the power button to shut down, and restart without the drive attached, everything boots up just fine.
    If anyone has experienced this, please help ...

    Open Disk Utility, select the external disk in the sidebar and verify the disk. If there's an issue with them, repair the disks

  • Epson SX445W printer won't work since upgrading to mountain lion

    I upgraded both my iMac and my Macbook to mountain Lion and ever since doing so the less than 6 months old Epson SX445W printer I have, which is supposed to be compatible with Mountain Lion won't print wirelessly anymore.
    I've hunted high and low for new drivers, tried removing and re-installing the printer, switched off gatekeeper, all to no avail, the only way I can get it to work is to print via USB. 
    The Printer network settings show it is correctly linked to the wireless network.
    I've tried adding the printer via IP, when I put the printers IP in, the imac detects the printer and asks me if I wish to use the Epson Stylus SX440 (which I select as it is this driver I previously used before mountain lion) and it the tries to install, tries to download new software and then fails, with the error message
    'Can't install the software fo the Epson Stylus SX440 because it is not currently available form the Software Update Server.'
    I am at a loss as to how to progress, I'm starting to feel the upgrade from Lion to Mountain Lion was pointless, I must admit I was perfectly happy with Lion anyway as it always worked flawlessly for me.
    Any help would be appreciated.
    Craig

    Hi Mende1
    When I do that no printer appears unfortunately, only Adobe PDF 8.0
    SInce posting this I did try removing and adding again, I have managed to get it to print by using the IP again to add and entering the ip address and then instead of using the default SX440 driver off my machine I selected from the list on the dropdown and chose Series 440, this successfully added the printer, and it just printed a test page, however I'm a little worried that this won't persist as soon as the printer is switched off and a new IP address is assigned by the DHCP server, and I shouldnt need to have to keep re-adding it, any other ideas are most welcome

  • Programs that rely on Java won't work since upgrade to Lion!!!

    I opened a program yesterday after the I upgraded to Lion and a message box opened up stating that it would have to update Java for the program to work.  The java update seemed to work but the program never opened.  I tried to re open the program again and it appreared to start up and then it closed down.  I restarted the computer but I got the same result.  Any one know how to fix this?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.

  • Mail won't work since upgrading to Leopard

    I just upgraded to Leopard and now Mail doesn't work at all. I click on the icon and it says, "You cannot use the application "Mail" with this version of Mac OS X. Everything else works fine.

    you may have more than one Mail.app on your computer, and you may try to launch the Tiger version instead of the Leopard version. Can you search for Mail.app and see if indeed you have more than one, then select Mail.app 3.0, the leopard version and start it up.
    Once you have located the correct version, trash the old one.
    hope this helps

  • Have not been able to get flash working since upgrading to 7.0.1, using the Debian Linux OS.

    I haven't been able to get the flash player working since upgrading to FF 7.0.1 on Debian Linux. I have followed the instructions in "How do I install the Flash plugin?" (https://support.mozilla.com/en-US/kb/installing-flash) multiple times.
    As I said this has been an issue since the latest upgrade. I was able to get flash working in earlier versions. Flash works in the Debian "Iceweasel" version of FF.

    Thanks for the post, but no, that did not fix the problem.
    I have located these directories:
    /opt/firefox/plugins
    /usr/lib/firefox/plugins
    /usr/lib/mozilla/plugins
    /usr/lib/mozilla-firefox/plugins
    of course there is the /usr/lib/flashplugin-nonfree directory but that shouldn't matter for FF itself.
    Still not working and I get this message on the "Check you plugins" page:
    "For your safety, Firefox has disabled your outdated version of Flash. Please ''upgrade to the latest version.''"
    The version on that page "Adobe Flash Player version 11.0.1.152
    Your system: Linux 64-bit, Firefox" is the version I'm using.

  • Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight???

    Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight??? It started when I tried to upgrade current flash player and it said I needed to uninstall current version, which I did, and then it wouldn't download the current one giving me the not supported story! Please help!!!!!!

    Hi Andy, that is correct, they don't support PPC Macs anymore.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
    Download this if you haven't...
    http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
    Once downloaded if it doesn't unzip automatically the double click on that file.
    Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
    Or smaller here...
    http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
    Stand alone player...
    http://dl.dropbox.com/u/450421/LastFlashPPC.zip
    Or free 3rd party...
    http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html

  • I am trying to transfer my upgrade to my second line.  When I try to order any other phone it works fine, but won't work to upgrade to Iphone 6

    I am trying to transfer my upgrade to my second line.  When I try to order any other phone it works fine, but won't work to upgrade to Iphone 6

        TWRING,
    Help has arrived! Since the device is currently on pre-order when processing the order online it will only recognize the line eligible. Once you receive the device you may activate it on another line if needed.
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • FaceTime won't work since iso 6 updated to Iso 6.

    FaceTime won't work since iso6 update. Every time since I have updated to Iso 6, FaceTime will not work. When I try to FaceTime, after about 30 seconds it tells me that the connection is lost! My iPad is wifi only. Help!!!!!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion.  I was wondering if there is a solution to getting this working again?

    My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion.  I was wondering if there is a solution to getting this working again?

    You just need to update it to the latest version.  See:
    http://kb.parallels.com/114449

  • Signature field NOT working since upgrade to Adobe Pro X

    Hi Forum,
    Form stop working since upgraded to Pro X (ver 10) in Adobe.  Getting this message:
    IntegriSign
    This plug-in is intended for validating signatuers signed using earlier versions of Acrobat.  To sign using this version of Acrobat use "IntegriSign to Acrobat 9.0 and later" handler
    I have changed settings in Adobe Pro X to the above but still get the same message.
    Do anyone know how to fix this?
    Thanks,
    Patricia

    Download directly from Apple and install over what you have now;
    iTunes 12.0.1

  • Home sharing on apple tv not working since upgrade to yosimite

    home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
    everything worked fine before this!

    Hey stephenfromdominion,
    Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Thanks,
    Matt M.

Maybe you are looking for

  • Maintain settlement rules in a PM order

    Hi! I would like to find an easy way to automatically fill the settlement rule in an existing PM order. If it is possible I would like NOT to use BDC (Batch input). A function element or maybe a BAPI would be the best solution. If anyone knows a way

  • Can someone help me, changing the screen AV

    ive been looking through my keyboard hotkeys for about 45 mins, and i cant seem to find the hotkey to change the imac screen AV for my mini tv port, as ive got my xbox connected to it....any ideas?

  • CP4 - View Current Frame of Captured Animation?

    Hello all, I'm a new CP4 user, so bear with me on this question. When editing, I was wondering how I can view the current frame under the playhead for a captured animation WITHOUT scrubbing? I have a bunch of captions to align to elements in the capt

  • Pc help needed

    hey, hope someone could help, would either of these be capable of running premiere comfortably? cheers Processor Intel® Pentium® Processor E5700 - 3.0 GHz - 800 MHz FSB - 2 MB L3 Cache Operating System Genuine Windows® 7 Home Premium RAM - 3GB instal

  • WHAT IS PBJECT DOCUMENTATION? WHERE YOU CAN DO IT? WHAT IS THE USE OF THAT?

    WHAT IS PBJECT DOCUMENTATION? WHERE YOU CAN DO IT? WHAT IS THE USE OF THAT?