My flash drive isn't showing up on my Mac. How do I find it?

I need to get a file off my flash drive and onto my mac. I plugged it in and it isn't showing up. I checked the finder window, as it has been there before but its not there. My flash drive is working, as I can open it on our other comp.

Click on the Desktop and go to Finder>Preferences>General tab and make sure 'External Disks' is ticked under devices. Do the same on the Sidebar tab if you'd like it to show there as well.

Similar Messages

  • HT2518 my external hard drive isn't showing up on my Mac desktop.  Does the external hard drive need to be an apple one?

    I have recently bought a Mac Book Pro and I am trying to transfer my files from my old PC to the new Mac.  I have put my files onto an external hard drive but when I plug it into my Mac is doesnt show on the desktop? 

    Check the settings in the General tab of the Finder's preferences.
    (66178)

  • "Removable Disk" shows up in Windows 7 even when USB Flash drive isn't there

    I have a new windoz 7 computer, a couple of new sandisk cruzer 16bg flash drives. I removed the flash drives a couple of times without doing the "eject" thing. I never had a problem with your flashdrives on my xp machines. I know I was a bad boy, I just pulled the usb flash drive out. When I go to my computer folder it shows me my hard drives and its shows 5 Devices with Removable Storage ....one of which is the DVD RW Drive and 4 Removable Disk  which are or were times when I plugged in my usb flash drive. They show 0 bytes, nothing is in any of the "Removable Disk" instances and I cannot remove them. I tried to delete, cut and I tried to eject but the Removable Disk icon stays there. How can I get rid of these safely, I tried rebooting a couple of times, they show up even without any usb devices plugged in. Thanks in advance Scott

    I had this same problem.  It turns out to be easy to resolve:Open the Windows 7 "Start" Menu,  on the right shoose computer, in the new window that opens choose System Properties from the choices across the top of the window, now on the left side of the window choose Device Manager.  In Device Manager expand the "Disk Drives" entry.  You should see a listing of your hard disk drives and you'll also see "removable disk drives" with some additional idnetifying information.  Select the offending entry and then right click and select "Uninstall" click "Okay" and the entry will be gone.  Just be sure you're not uninstalling one of your hard disks.  That's all there is to it. To prevent this issue in the future always "eject" the SD drives/sticks before you remove them. I hope this helps.

  • Hard drive shows 159gb of other (yellow) how do I find out what these are to free up space?

    hard drive shows 159gb of other (yellow) how do I find out what these are to free up space?

    Hope this helps.
    1. Empty Trash.
        http://support.apple.com/kb/PH10677
    2. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    3. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836
    4. Disk space / Time Machine ?/ Local Snapshots
       http://support.apple.com/kb/ht4878
    5. Re-index Macintosh HD
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409

  • When i click on "text message forwarding", the code isn't showing up on my mac

    The code simply isn't showing up on my Mac, even with the iMessage app open and my phone connected.

    Resolved, I just needed to update the mac software.

  • I got 3.95GB available on my flash drive and need 4GB to reinstall lion osx how can i create space on usb using Disk Utility ??!

    I got 3.95GB available on my flash drive and need 4GB to reinstall lion osx how can i create space on usb using Disk Utility ??!

    What is the capacity of the flash drive?
    You might also be able to reinstall Lion without a flash drive, by booting up the computer holding the Command + R keys, and choosing Reinstall OS X.

  • Flash Drive Isn't appearing

    Just bought a new flash drive.....get home and plugged it up to my macbook pro and it isn't showing up....I went in to disk utility and it shows there but it can't be mounted.....really need help

    Here is the information I retrieved on the disk:
    Name : DS Secure + Media
              Type :           Disk
              Partition Map Scheme :           Unformatted
              Disk Identifier :           disk2
              Media Name :           DS Secure + Media
              Connection Bus :           USB
              USB Serial Number :           90BB1300FFFF0064
              Writable :           Yes
              Ejectable :           Yes
              Location :           External
              Total Capacity :           16.01 GB (16,005,464,064 Bytes)
              Disk Number :           2
              Partition Number :           0
              S.M.A.R.T. Status :           Not Supported

  • My new flash drive will not show up on my macbook pro?

    It's really strange because I know my usb ports are working, the flash drive works perfectly fine on the mac desktops at my school and if I open up system profile it shows that it's plugged in! But it won't show up anywhere for me to actually access it! Not on my desktop, not in my finder, I've tried searching for it and checked to make sure I have my finder settings checked to show external drives on the desktop and in the sidebar in finder windows. I checked on one of the desktops and it is formated as...FAT 32 bit I think? something like that. I've also restarted a couple times already and plugged and unplugged it a few times to try and get it to work. The last time I  plugged in someone else' flash it showed up too so I don't know why this one won't show up, I've looked everywhere to figure out why it might not be working, but I need it to work so I can get my school work off my school computer before the end of the semester!
    If anyone can give me some suggestions or help I would really appreciate it!
    P.S. This is what my system profiler shows for it:
    USB FLASH DRIVE:
      Product ID: 0xb107
      Vendor ID: 0x03f0  (Hewlett Packard)
      Version: 40.96
      Serial Number: AA1B132C00000354
      Speed: Up to 480 Mb/sec
      Manufacturer: HP
      Location ID: 0xfd130000 / 5
      Current Available (mA): 500
      Current Required (mA): 200

    Press the Repair Disk button. If it doesn't find any issues or repairs those it finds, press Mount.
    If it finds issues that it can't fix, run a more powerful utility such as DiskWarrior or a data recovery product on it.
    (109879)

  • I am trying to backup my loaded ipod to my new pc. I have saved my library to a flash drive, but nothing shows up when i connect to itunes on my new pc. How can I transfer my music library over?

    I am trying to back up and sync my ipod nano to a new pc. When i connect, my ipod shows up under devices, but no music shows up. I saved my library to a flash drive and saved to my new pc, but it will not drop into itunes. How do I transfer my itunes library from and old pc to a new one? I have looked up all the info, but nothing has worked.

    I think I may of found a solution to your problem, have a read of this article
    http://support.apple.com/kb/ht1751

  • USB Flash Drive no longer shows on Desktop, it does appear in disk utility. I recently upgraded to 10.8 from 10.6 on both iMac and Macbook and the drive does the same on both.

    I updated my Snow Leopard to Mountain Lion and have had only minor issues with some software but I plugged in a USB flash drive and went to format it, it now appears only in disk utility and not on the desktop. I have tried restarting and reseting with the drive in and out, I tried it into my macbook and it does exactly the same there. I can't do anything in Disk Utility so can't access it in any way and it says errors if I try to eject it from DU. I'm not normally stumped but I can't figure this out at all. I'm hoping that someone here could give me an idea that I haven't thought of as it's a large Flash Drive and I really would like to keep using it.
    Thanks in advance for any help anyone can offer.

    If it has the same (bad) behavior on two different systems then there is a very good chance that the  drive is toast.
    BTW you'll get better response to your questions if the question actually reflects the problem you are having. In this case it would have been better to say you couldn't access the drive rather then that it doesn't show on the desktop.
    regards

  • [SOLVED]USB flash drive no longer showing up in /dev

    My USB flash drives are no longer showing up in /dev. I also don't see them in /dev/disks/... either. Dmesg outputs:
    [731969.826862] usb 1-1: new high-speed USB device number 5 using ehci_hcd
    Any ideas on where to start?
    Last edited by nadman10 (2012-09-26 22:12:22)

    ls -l outputs:
    Bus 001 Device 005: ID 0781:5530 SanDisk Corp. Cruzer
    Couldn't open device, some information will be missing
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x0781 SanDisk Corp.
    idProduct 0x5530 Cruzer
    bcdDevice 1.00
    iManufacturer 1
    iProduct 2
    iSerial 3
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 32
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 200mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk-Only
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 1
    Bus 002 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
    Couldn't open device, some information will be missing
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x045e Microsoft Corp.
    idProduct 0x0040 Wheel Mouse Optical
    bcdDevice 3.00
    iManufacturer 1
    iProduct 3
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 34
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xa0
    (Bus Powered)
    Remote Wakeup
    MaxPower 100mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 1 Boot Interface Subclass
    bInterfaceProtocol 2 Mouse
    iInterface 0
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.10
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 72
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 10
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Couldn't open device, some information will be missing
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0002 2.0 root hub
    bcdDevice 3.05
    iManufacturer 3
    iProduct 2
    iSerial 1
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Couldn't open device, some information will be missing
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0001 1.1 root hub
    bcdDevice 3.05
    iManufacturer 3
    iProduct 2
    iSerial 1
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 1x 2 bytes
    bInterval 255

  • Flash Drive not mounting, shows up in sys. prof. and USB Prober

    I have a 4Gig Flash Drive that doesn't mount. It shows up in both SYstem Profiler and USB Prober. Is there any way to "fix" it? I don't need to recover any files - I just want to be able to use it.
    It used to work, maybe a year ago. Havn't touched it since.
    The port is just fine, it's definitely the drive.
    Thanks for your time!

    it doesn't show up in disk utility. unless there is a way to force mount it, disk utility can't help.

  • How to change Flash Drive icons (mine shows as a default)

    Why does This keep happening ? on every mac my Flash drive has the icon but on mine it shows like this

    I always have converted .png files to .icns files. You can do this for free from iconverticons.com. Click on Use iConvert icons Online.
    I think the following might work when using the .png file.
    Open the .png file in Preview
    Press Command+A to select the entire image
    Press Command+C to copy the selection
    Do a Get Info on Macintosh HD and click the thumbnail icon to select it
    Press Command+V to paste the image

  • Upgrade to 10.4.7, now USB flash drive isn't recognized

    I upgraded to 10.4.7 the other night, but the installation was interrupted. Apple Support got the machine up and running by doing a safe boot and removing some corrupted start up files.
    Problem is that my USB memory key isn't recognized. It works fine in my iBook, but not in the iMac.
    It appears in the System Profiler as a "Flash Disk", but does not appear in the Disk Utility.
    iMac Intel 20"   Mac OS X (10.4.6)   Upgraded to 10.4.7

    I have an expanded problem now -- I still can't get the system to recognize the flash drives, and it won't recognize my digital camera, either. Oddly, it starts iPhoto, but it doesn't see the camera.
    I've tried all the erasing tips with the flash drives, but they didn't work.
    There is nothing in either System Profiler or Disk Utility identifying the camera.
    Otherwise, the system runs great. And the keyboard and mouse work fine.
    Any ideas?

  • Flash drive doesn't show up on desktop?

    I have a f;lash drive that I've used for a long time to carry data between my home computer and my work computer.  Suddenly it isn't showing up on the desktop of my MacBook Pro running the latest version of Yosemite.  It does appear under devices in a finder window, but not on the desktop.  I have restarted my computer, not just let it wake up from sleep, but that doesn't change anything.  Any suggestions for how to get it to re-appear?
    Thanks!

    Do a backup.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.desktop.plist and com.apple.finder.plist.  Move the .plists to your desktop.
    Re-launch Finder by restarting and test. If it works okay, delete the plists from the desktop.
    If the same, return the .plists to where you got it  from, overwriting the newer one.
    Thanks to leonie for some information contained in this. 

Maybe you are looking for

  • Need help contacting a real live PERSON at Apple

    I have a general technical issue that I badly need to have addressed; it's not anything to do with any specific device, which is where I'm running into trouble. It's an ongoing problem, and there should be a generic customer support area that can tak

  • Enable Microsoft Update (not just Windows Update) for Windows 2008 R2

    I am running Windows 2008 R2 in my Citrix XenApp 6.5 farm. Office 2013 is installed. I can't update Office via Windows Update. Why? Take a look at this ridiculous roundabout tautology it takes me through. Here I am in the Windows Update panel: If I c

  • Why in QuickTime there is no option to disable launching it at startup?

    It's VERY irritating. There should be, i use QuickTime not everyday, so it would be easier for me if i could disable launch at startup directly from QuickTime. I would do it by myself if i could get the source code. Perhaps it would take ten minutes

  • Logic behind database cache - war behind complexity - funny

    Guys, help ne out... I know that you want to separate application server and database server to different machines so that you will not just be taxing one machine. That is you want a database server as a back end to service database requests...You wa

  • How to find the event time segment details from delivery document

    Hi, In the delivery document at header level in Dates tab i have maintained begining Plan date where Event = Shipment. But that field is in structure. How to fetch those(Begining Plant Date) details in to report, I have tried from Function module sid