My folders in my I-Phone are not displaying or populating.....How may I fix it?......

My folders in my I-Phone are not displaying or populating.....How may I fix it?......

What type of account is it?  If POP and you just setup, then yes that is all you will see.  Once you send, you will get sent times.  Once you delete you will get trash.

Similar Messages

  • My Macbook is not playing sound unless i have headphones in. The light in the headphone plug stays on even when they are not plugged in. How can i fix this?

    My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?

    You might need to clean the headphone port (I was in the same situation and this worked for me).  Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in.  After cleaning the issue was resolved.

  • I updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

    i updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

    Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

  • All my songs got deleted off ipod touch 4g and are not syncing back. How do I fix this?

    READ THE WHOLE THING. I went to download a Taylor Swift CD to my ipod. I imported it like usual then hit sync. It didnt work. I tried importing it again and syncing it didnt work. So in the top menu where it says music, summary, ipod etc, I clicked on music. The box where it said sync songs was not checked so I checked it a pop up came up so I hit ok. Needless to say all my songs EXCEPT the Taylor Swift ones are not on my ipod! I have tried everthing to get the songs back.  The funny thing is when I go to library all my songs are in it but when I g to songs it only says there 16... Please reply to this question... I wont my songs back...

    See if this previous discussion helps.
    Sync Session Failed to Start iTouch iOS5: Apple Support Communities

  • Video and audio are not in sync. How do I fix it?

    I recently bought the Adobe Premiere Elements 11 Video Editing Software and after using it one time most of my videos are not synced with their audio. The audio seems to be fine, but the video keeps on speeding up and slowing down. It is very stressfull. I would love to get back to my video editing as soon as I can. Please Help!

    Step 1 - exactly what are you editing?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/
    Step 2 - how did you get your (unknown) video into PreElements?
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    Other - lots more information about the program
    Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
    -Page to download current PDF http://helpx.adobe.com/premiere-elements.html
    Saving & Sharing http://forums.adobe.com/thread/1137128
    -Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
    -Sharing for Movies http://forums.adobe.com/thread/1051093
    -Sharing for Computer http://forums.adobe.com/thread/1058237
    Steve's Basic Training Tutorials... steps are the same for several versions
    -start at http://forums.adobe.com/thread/537685
    -v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/1479311200/
    -All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
    -and http://forums.adobe.com/thread/498626
    -and http://prodesigntools.com/four-hours-free-video-tutorials-new-photoshop-elements-9-pse9.ht ml
    -and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
    Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/
    And finally... when you ask a question, the information you need to provide to help people help you
    These questions below may be for a different product... but the information you need to supply is the same, for the products you use
    -Information FAQ http://forums.adobe.com/message/4200840

  • I had to get a new keyboard and now the keys in the upper row are not working appropriately. How can I fix this problem?

    My keyboard stopped working so I went to the apple store to replace it with another one. Now I am back home and the keys at the very top are not working correctly (volumn  F12 shows the dashboard, F11 takes the screen up and away, F8 pause button shows spaces, etc.). What should I do to correct this problem - I assume I probably need to download some type of softwear but what? I have a Mac OS X  Version 10.5.8 desktop - 2.66 GHz Intel Core 2 Duo processor.

    All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
    Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
    I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

  • My outgoing texts are not being recieved.  How do I fix this?

    I got my iPhone a few days ago and I am my texts are not being received. Any suggestions?

    Apple has a pretty comprehensive trouble shooting guide in Mail Setup, Troubleshooting etc..

  • HT4061 My phone is stuck in recovery mode and I have very important pictures that are not backed up. How can I fix this

    My iphone 5s became stuck in recovery mode while I was trying to backup to icloud. How can I get it off of recovery to save my photos? It wants me to restore in itunes but I'm afraid I will lose my photos.

    IF your phone is in recovery mode, then there is no data on it.
    If you didn't import your pics or have photos stream enabled or have a previous back up, then sorry your pics are gone.

  • Keyboard or right hand bottom area not working...how do I fix?  And update problems.

    My keyboard will not type the letters M, I, J and sometimes the letters around.  I can turn it horizontal and it works, except that area.  I think it is a spot on the the right side of phone that is just not working touch-wise.  Anyone heard of this?  I did a hard restart and it still did not fix.  I also tried to update it through iTunes and now iTunes will not let me get the newest download.  It gets stuck at "Backing up iPhone".  It is very frustrating!

    Have you tried to reset by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.  If that hasn't/doesn't work try a restore from back up - http://support.apple.com/kb/HT1414

  • Just recently, when I put clips into iMovie, the audio and video are not in sync. How can I fix this problem?

    Whenever I try to make a video on iMovie, the audio is not in sync with the video. This just happened recently. I have no clue what is causing the problem, or how to fix it. What should I do?

    Hi samueldoherty,
    If you are having audio issues during video playback in iTunes, you may find the following articles helpful:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/TS1362
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    Regards,
    - Brenden

  • Keyfigure values are not displayed below freecharacterictics - how to show?

    Hi,
    I am working a workbook, to see the all the values of the keyfigures below freecharacteristics what we need to do?
    I am able to see the keyfigures but not the values. (this is which we find above the report) in the workbook.
    Please help, checked all the text elements, which didnot help
    thanks,
    rani.
    I

    Hi,
    In the workbook, before the report(rows and columns)  the free characteristics, key figures are displayed.
    Against keyfigures i want to display values.
    For example:
    Title:   ReportName(XXXXXXXXXXX)
    Sold-to party     
    Sold-toPartyCountry     
    Material
    Key figures    < here i want to display the values of all the keyfigures>     
    Below are text elements
    Division (Selection Options, Optional)     Empty Demarcation
    Division (Selection Options, Optional)     Empty Demarcation
    Author     SAP
    Last Changed By     SAP
    Here the report comes
    Thanks,
    rani

  • Some songs purchased through Facebook are not syncing onto iTunes, how can I fix this problem?

    Good morning to all of you in this community.  The reason for this discussion being started up is because I am having trouble uploading some mp3 files that I purchased through Facebook.  most of the songs uploaded successfully with no problem, bit there are a few that I can't find although I downloaded them. I am a new user to Apple products, so this is quite an annoyance to have to be dealing with. If anyone has any helpful suggestions I would appreciate it greatly, thank you.

    Interesting, this is the first time I hear one can purchase songs via Facebook. Note that unless youpurchased the songs from iTunes, you will not be able to add them to the Music app on your iPHone.

  • I recently updated my itunes to 11.3.1, and now when I connect apple devices to my Windows computer with a USB, they are not showing up. How can I fix this?

    This problem makes it impossible for me to sync any apple device to my itunes library. I have tried reinstalling itunes, but it still doesn't work. My computer recognises the devices, but itunes doesn't.
    Suggestions?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Next
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • After using apogee duet, mac's built in mic & logic's track headers for recording are not working properly.  How do I fix it?

    I use logic 9
    After using apogee duet for mac, I was away from my home studio without the duet and wanted to record vocals via the internal microphone on my mac book pro.  (Obviously, I know it wouldn’t be the same quality.  I wanted to do it as a draft, because I had a melody in my head and wanted to record it so I could remember it later.)
    After opening up a project I was unable to record audio.  I noticed the track headers had changed.  Sometimes the “record ready” button was missing.  But whether it was there or wasn’t, the same thing kept happening… After pressing the “record button” or the “record ready” button a window would pop up that said, “No input source selected!”  I tried to trouble shoot by configuring track header and by going to prefereces>audio>devices>core audio, and switched the “input device” to “built in microphone,” and things like that, but I still would get the same pop up window indicating “no input source selected.”   To be thorough, in preferences under “core audio,” I have selected universal track mode, 24 bit recording, and software monitoring.
    Do I need to reset something?
    If your recommendations help fix the immediate issue temporarily, how do I keep it from reverting back to the same problem if I feel like switching between the duet interface and the built in mic in the future?  How do I keep it permanently from this malfunction?  It seems like this is something simple that would be addressed.
    Also, as I was trying to think of anything it could possibly be.  I wonder if it could be the driver I installed for an old m-box2 possibly causing an issue.  After getting my new mac book pro, I downloaded a driver for m-box2 (the second generation that came out in 2005 and used pro tools LE.)  I used the m-box on my previous computer and it worked well.  Since I purchased a new macbook, I tried to use it on my new computer, but since the m-box2 is a 32 bit system, it didn’t work very well, which is why I got the duet.  I don’t know if that could possibly be messing anything up.  If so, should I uninstall it somehow?
    Thanks

    Ok, think this through... you've changed from a stereo source to a mono source.
    The message reads: “No input source selected!”
    On the track you're trying to record there is an Input section directly underneath the  I/O label. Click and hold to select the correct Input for that track.
    Also, the project you opened was saved with the Duet's driver/interface parameters.. if you open the same project without the audio interface Logic will do it's best to pick I/O that's compatible but I've never seen any DAW do this perfectly.. it always takes a small amount of user input. Especially since you've changed from the Apogee to the internal mic.

  • When i try and burn a cd it tells me that a disc burner or software are not found...how do i fix this?

    when i try to burn my music onto a cd it tells me that a disc burner or software can't be found...how do i fix this??

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Maybe you are looking for

  • Difference between billing and invoice?

    Hi all can anybody say Difference between billing and invoice? thanks

  • Reading the Facility Callername from a tcl script

    I am looking for a way to read the Callingname in the facility message so that I can pass into set callInfo(displayInfo) Basically I'm trying to pass Callername to an ip phone through a TCL script on the gateway during callsetup. This normally gets d

  • Slow loading of reports and forms

    hi, i have created forms and reports- but they take atleat a minute to load when i goto the customize form of any report- the report running itself does not take time.. i have created the WWA_MODULE_BINDINGS_IDX1 and WWA_MODULE_LOV_BINDINGS_IDX1 inde

  • Is a separate photo-backup necessary when you use the catalogue-backup

    Well, the title says it all. When i back-up the catalogue, i assumed the backup would be mede of al the tags added to photo's. When i check the catalogue-files, i see a whole lot of jpg-files. My actual photo-collection contains jpg-, raw an avi-file

  • How do I delete Saft from 5.1

    I have not been able to get Saft to work with the newest update to Safari (I even sent a question to them, but with no response). Browsing the net, I think I've discovered that Saft does not work with the latest version, so I'd like to delete it. I'v