My Form Builder(6.0), can't open a *.fmb file ...

Hello everybody,
I encountered a strange error. I created a form module, I closed it, and, when I try to open it again, an "FRM-10043: Cannot open file" error appear.
What's the cause? It's the same version(6.0), even the same tool. I worked a lot at that form. I don't want to lose 14 hours of work.
Can anybody help me?
Thanks in advance,
Eugen

Salut,
Referitor la problema ta nu pot decat sa-ti recomand sa-ti instalezi TOATE tool-urile de pe CD pentru ca in felul acesta au ele grija unele de altele. Deci sa nu incerci sa faci instalari partiale.
Referitor la problema mea, probabil ca fisierul e corupt dar eu tot speram sa fie alceva, pentru ca am muncit o gramada la el. Tot sper deoarece imi mai da si o eroare de Windows atunci cand incerc sa manipulez fisierul asta( rename, replace,etc). Imi zice ca e o violare de sharing, ca fisierul poate fi un uz. Dar nu e in uz si nici nu e share-at. Insa cand inchid developerul pot sa fac lucrurile alcelea.
Euge

Similar Messages

Can not open a fmb file created in W2000 Server in XP

I create some fmb files in windows 2000 server, Developer 2000 Forms 6i & Patch 17, this forms work fine, but when i tried to open in Same release in Windows XP forms shutdown abnormaly with the next message
"Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience."
If i create a new in XP too work fine.
I make a test with convert in W2000Server fmb -> fmt then,
In XP convert fmt to fmb... it works but when i try to open shows the same failure.
Thanks.

hi..
I dont think that this is a problem with forms, for me the forms created in windows 2000 works fine with my windows xp
regards
Kris

Cann't open a *.fmb file (with the same version of Form Builder)

Hello everybody,
My Form Builder 6.0 cann't open a *.fmb file, created with the same version, even with the same Form Builder tool.
I worked for long time ago at this module, I saved it many times, I compiled it and it worked very well. But last time it didn't want to work(open). I couldn't open it (FRM-10043: Cannot open file). But the corresponding *.fmx file is working.
Here is some additional information:
When I try to rename or replace this file an Windows "There has been a sharing violation. The source or destination file may be in use" error appear. But that file is not in use and it is not shared. Is this helpfull?
Is there something which can be done?
Thanks in advance,
Euge

Sure. I did that many times. I checked the volume for the errors. I interrupted any share connection. I tried to change the extension of the file and to change it again to *.fmb(I did this on a copy of that file).

10g Forms Builder with error "cannot attach library" opening R12 fmb file

Hi all,
I had set up my Forms Builder with all the necessary PLL and FMB files for developing R12 custom forms. I have used the builder to do few custom PLLs and one custom form, and I did not have any problem opening seeded Oracle Forms. Today when I need to enhance that custom form I did 2 weeks ago and I opened Forms Builder, I got the error "Cannot attach library.." for APPCORE, APPDAYPK, etc.. Same error for opening TEMPLATE.fmb.
I have done these to troubleshoot:
1) I verified my Windows XP registry "FORMS_PATH" to include the folder where I store all the PLLs and FMBs.
2) I updated default.env to include that file path.
3) I create shortcut to Forms Builder and put folder path with PLLs under the "Start in" field of the shortcut.
4) I rebooted my machine after changing the registry
5) I moved the folder with PLLs to under C:; I seperate PLL to "resource" sub-folder and FMB to forms/US/ sub-folder just like the server structure.
6) I install one more copy of Developer 10G Suite and set up the registry.
None of these work and the key is it used to work with no issue. Any suggestions what may be the problems?
Thanks!
Mike.

Turned out I reloaded all the $AU_TOP forms and PLLs to my desktop and it worked fine. I think I did not FTP correctly the first time.

After saving a pll file in 11g Form Builder, should I be to open it in....

.......10g Form Builder?
Friends,
I am currently looking at upgrading our 10.1.2 forms application to 11.1.1 and am slightly puzzled by something.
If I open an existing 10g .PLL file in Form builder 11g and save it should I still be able to open it in Forms Builder 10g?
The reason for asking is that when we moved from 6i Forms to Forms 10g, once the PLL was saved in the newer version of Form builder it was no longer possible to open it in the earlier, 6i, version of Form Builder. If you attempted to do so you would see an error "Encoded format has an unrecognized format"
However it appears that after opening a PLL in Forms 11g builder and saving the file I can still open the same file in Forms 10g. Is this the expected behaviour?
The reason for asking this is that I want to check that the upgrade to 11g is actually doing something!
Thanks in advance

Hi Timothy,
The account cannot be validated error was due to a glitch on our activation server that has been fixed now.
Please try using acrobat now and check if you are still facing the problem.
Regards,
Rave

Can't open Kodak PCD files in Photoshop CS4

hi,
I can not open Kodak PCD files in Photohsop CS4, I do not have a diskof Photohsop CS3 or CS2 to copy Photo CD.8bi file. can anyone have idea form where I can download this plug-in so that I can open Kodak PCD file in Photohsop CS4. I am using windows 7.

People have been googling this. There are several free downloads that will open this type of file. Then just convert it into something like a jpg so photoshop can open it. Even Kodak no longer supports these files.

InDesign CS5 (Mac OS 10.6) can not open its own file

I need guidance to open an artwork file that in one hour I have to send to the print shop. InDesign refuses to open its own file.
Any clue? Adobe, please help.

Re: InDesign CS5 (Mac OS 10.6) can not open its own file
Bob and Peter
Thank your for helping us out. It was really necessary to ask a coworker to open the file and export it in InDesign markup language.
Three hours later than expected, but it's done!
We are stuck here. I'm a Master Collection user of CS5, using only Dreamweaver, Illustrator, Photoshop, InDesign, Bridge and Acrobat Pro. (I don't know why I bought the Master's). My coleague former Window user, got a Mac in May and downloaded the trial version of Design Studio Standard Collection of CS5.5. Before expiring, we purchased its license and filled it in the active trial version.
A couple of months ago we noticed that were missed Plug Ins on his version and contacted Adobe who instructed us to download the whole files again. We never did because it is a pain to get rid of the missing parts of a pre installed trial version etc.
I will ask Adobe to send a CD disk for his version.
Regards,
Junia

With out changing/opening the fmb file and fmx file Can i know the version

Hi all,
I am working with forms in different versions.
I have number of fmx files with few are complied in 5i, few are in 6i and few are complied in 10g.
All are in the same directory.
The problem is because of all are reside in the same directory, i don't know the version of the selected file.With out changing/opening the fmb file and fmx file Can i know the version of the selected fmx file?
Is there any possiblity to get the version of fmx file with java code?
Advance thnaks
Madhava

Hai prasath..
as i said we will not change fmb/fmx file directly.
Is there any chance to write a small java code and get the version.
adv thanks
Madhava

How can I open the windows file directory in "WHEN-BUTTON-PRESSED" trigger

Dear All,
How can I open the windows file directory in “WHEN-BUTTON-PRESSED” trigger?

Blessan Joseph,
The solution is dependent on your Forms version and if your applications is traditional Client/Server (CS) (Forms 6i and lower) or web deployed (Forms 6i and higher). For CS, you would use the Get_File_Name() built-in as Faa demonstrated. For Web, you will need to use the WebUtil library function Client_Get_File_Name() as Sarah (OGIR) demonstrated. Both of these functions will return the full path to a file. Note: WebUtil is an external library so it requires you to perform some configuration on your developer client as well as on the Application Server. WebUtil is included with Forms 9i and higher, but you must download it for Forms 6i.
My requirement is user should able to select windows directory for the output.Do you really need to allow the user to write to a file in the Windows directory? This is very dangerous and you should not allow users or programs to write to the Windows directory. Users should only be able to write files to "User" directories (\My Documents\<Directory name>).
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How can I open and edit files that were developed and published by ftp to my host on my old macbook, which I can no longer access.

How can I open and edit files that were developed and published via ftp to my host on my old macbook, which I can no longer access. The HD containing the files cannot be accessed. I want to be able to download the published files to be edited in iweb?

You CAN'T download published files and then edit them in iWeb because iWeb can't open them - it has no import facility so is unable to open any html or css files - a previously published site.
You can download these files yes, but you'll need to use them as a guide or to cut and paste text from there whilst you re-build your site in iWeb.
The only other way is to download the files and then open them with an html editor such as TextWrangler or use one of the other web design programmes out there that is capable of importing html and css such as Dreamweaver of Flux 4.
These are your only alternatives as iWeb can't import and if you want to continue to use iWeb, then you'll have to re-build your site from scratch. If you do just remember to back up your domain.sites file this time around - it is found under your User/Library/Applicaion Support/iWeb/domain.sites.

How can I open a cc2014 file in my cs6 version of Indesign ?

How can I open a cc2014 file in my cs6 version of Indesign ?
I have several files that has been saved in a cc2014 version and I can't open them in my CS6 version of Indesign.
I don t have access to anyone who have the cc 2014 version to convert the file.
How can I do it from my cs6 version?
THANKS!

You can't do it from CS6.
You have to export to IDML from InDesign CC2014 (or whatever the version it was created in) and then open the IDML in the earlier versoin of InDesign.
All explained in the FAQ on the main forum page.

I can't open a pdf file since updating to firefox 4.0. I have foxit reader installed and it worked before. Adobe is not compatible with Firefox. What do I need to do. I need to file my income tax online and can't because of this issue

Just can't open any pdf files. Having no luck trying to fix myself.

For Firefox users, there might be a built in pdf viewer, or a preferred viewer that handles pdf files.
I am not having any trouble logging in, so lets try this:
* Remove any cookies from the cache: [[Delete cookies to remove the information websites have stored on your computer]]
*[[Refresh Firefox - reset add-ons and settings]] if there is stored user data that is removed in this process: [[Back up and restore information in Firefox profiles]]

Why i can't open my raw file in adobe photoshop cs6... and i use camera Canon 650D

why i can't open my raw file?

You probably need to update your Camera Raw plug-in for CS6 to something new enough to understand the 650D raw files.
The usual way you’d do this would be Help / Updates in PS.

How can I open Microsoft Word files on my iMac?

How can I open Microsoft Word files on my iMac?

You can even use the Pages app that is installed on your computer. Finally you can buy a license of Office for Mac and have Word, Excel, PowerPoint and if you want Outlook too.

I can only open 1 .Ai file at a time from explorer

Okay. Googling is getting me nowhere and posting this is a last resort.
computer is running:
Windows 7 x64 SP1
Creative Suite 5.5
Illustrator 5.1
The problem is:
From within Windows Explorer, I can only open 1 Illustrator file at a time. To get a different file to open, I either have to drag and drop the second file into the tabs under the menubar, or I need to quit Illustrator and re-open it. Also, I can not open additional files from Explorer one-at-a-time if one is already open.
Quirks:
If I go to File -> Open I can select multiple files from within the Open File dialogue window and they open just fine. but i can't do it from within windows explorer. This used to work and now it doesn't and I have no idea why. Can anyone help me out?
Seriously? 137 views and no replies? No one has run into this before?

This is a long shot but try going to Preferences/Type and uncheck "Show Font Names in English".
Quit illustrator and restart, does it work now?
The reason I´m suggesting this is that unless I have this box unchecked, some internal function in illustrator crashes after I´ve opened one document and I have to quit & restart if I wan´t to open another one. A rather silly bug and I stumpled upon the solution by accident after cursing illustrator for a couple of months...

My Form Builder(6.0), can't open a *.fmb file ...

Similar Messages

Maybe you are looking for