My form builder create the fmx but its not populating. what is the reason?

Hi,
if i execute the form builder it wil create the fmx file but its not populating. if i want to use i have to run the fmx file..
can any body help the reason why it's not populating?
and one more proble is my form call the report but it's running. yester day it was work well. but today its not working. i didn't change any thing in that today.

Your question is quite unclear. Also, I think you should review this:
http://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo
In the future, please be sure to include the complete product version and platform you are using. By version, I mean the numbers and not the name. For example, 10g is not a product version - it is a name.
You said,
...if i execute the form builder it wil create the fmx file but its not populating. if i want to use i have to run the fmx file... What do you mean it doesn't populate+ ? Then you say, "... I have to run the fmx...". The fmx is the file you need to run. You cannot run the fmb as this is the source code file.

Similar Messages

  • My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

    My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

    How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.

  • I just got the new i pod touch and im trying to get my wi fi on with my grandparents passcode but its not working, what do i do?

    i just got a new i pod and cant connect to wi fi im putting in the right passcode but its not working what should i do?

    Try:
    - A reset. Nothing will be lost
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Powering off and then back on the router.
    - Resetting network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • My vreative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i  do?

    my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i  do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • I have 10.6.8 just purchased mountain lion, but its not compatible, what do I do?

    I have a 10.6.8 just purchased mountain lion, but its not compatible what can I do?

    What year, screen size, CPU speed and amount of RAM installed in your iMac?
    If your iMac is not a mid-2007 iMac model or newer, you can't install OS X 10,8 Mountain Lion.
    Tthe highest OS X version that can be installed is OS X 10.7 Lion.
    You need to call Apple at 1-800-MYAPPLE ask for retail software sales and tell them you want to install OS X 10,7 Lion onto your iMac. They will give you a special download code to access the OS X 10.7 Lion download from the Mac App Store.
    Good Luck!

  • I forget my password to my ipod and i have try to rerstart it but its not working what should i do?

    i forget my password to my ipod and i have try to restart it but its not working. i have done i could think of please help!!

    If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
      1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
      2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
      3. iOS- Understanding passcodes
      4. What to Do If You've Forgotten Your iPhone's Passcode
      5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the
              Back Up option. If you have just backed up the device, it is not necessary
              to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • I have created visitor attribute but its not working..

    Webcenter Sites version : 11g R1.
    I have created visitor attribute and I have created segment based on it.
    Now, I am trying to access segment from CSElement jsp.
    [code]
        <vdm:setscalar attribute="Activity"
            value='<%=request.getParameter("Act")%>' />
    [/code]
    and passing param from url like .. http://localhost:8001/cs/ContentServer?pagename=testpage&Act=123
    But on executing
    <commercecontext:calculatesegments />
    I am not getting any segment list.. Do we need to do any thing else apart from this?
    Regards,
    Niraj

    Hi Niraj,
    Did you check if request.getParameter() is giving you any value??
    If yes, then try it like this:-
    <vdm:setscalar attribute="Activity" value= '<%=request.getParameter("Act")%>' />
    <commercecontext:calculatesegments />
    <commercecontext:getsegments listvarname="lstSegments"/>
    This list should contains all the segments calculated.
    Hope this helps.
    Regards,
    Nelash jindal

  • I have a new mac book pro. i am using a usb not associated with my mac. when trying to download films onto the usb it keeps saying no space on it but its not full what can i do?

    i've just bought a new macbook pro retina. i am using a usb not assocciated with this mac. when i try to download movies onto the usb it keeps coming back saying its full when i know there is plenty of space left. what can i do to correct this problem? do i need to buy a new usb? thanks

    empty your trash
    then open disk utility and reformat it
    as mac journaled if you only want to use it for a mac
    if you want to use it for both mac and PCs, select the partition tab, choose 1, format exfat and MBR under options
    enjoy

  • HT1212 my ipod is disabled and i tryed that but its not working what should i do

    plese help me i cant figure this out !!

    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Or try using this program to place the iPod in recovery mode
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • I have created Apple id and password to set up icloud but its not taking in the same login id and password

    I have created Apple id and password to set up icloud but its not taking in the same login id and password. Should i have an Apple product in order to install icloud? becoz i am using HP PC
    thanks ria

    You can on create an iCloud account on an iiPhone, iPad or iPod Touch( running iOS 5 or higher) or Mac (running OS X Lion or higher).
    After creating an account on one of these devices you can then sign into the account on your PC, but you can't create the account on a PC.

  • Error in Forms while creating the trigger- WHEN-CREATE-RECORD

    Hello,
    Right now I am using 11g client side and 10g database.
    I am constantly getting an error while creating triggers in 11g.
    I have created a sequence in SQL developer using the following code:
    create sequence loc_id_sequence
    start with 14;
    After creating the sequence. I am trying to write the PL/SQL code in forms builder for the trigger WHEN-CREATE-RECORD
    declare
    loc_id number;
    begin
    loc_id := loc_id_sequence.nextval;
    end;
    But I have been getting the following error constantly. Can anyone please help me?
    "Error 0 at line 5, column 4
    SQL statement ignored".
    Can anyone please tell me why I am getting that error

    In fact, even I thought there might be some problem with the connectivity with the 10g database and 11g client but the other DB related code works.
    I just have the problem with using sequence for the trigger WHEN-CREATE-RECORD.
    In fact I also tried using WHEN-NEW-RECORD-INSTANCE smart trigger instead of WHEN-CREATE-RECORD for the same sequence. But even that doesn't work.
    Do u have any idea of what that error means?
    "Error 0 at line 5, column 4
    SQL statement ignored"
    Edited by: Pooja 1985 on Feb 26, 2013 5:43 PM
    Edited by: Pooja 1985 on Feb 26, 2013 5:44 PM

  • How to validate multiple lines which is exist in the form builder at the same session

    Hi All,
    we are working on oracle Forms personalization to trigger the message at the point of saving multiple lines rather than requiring each line to be save individually. Currently the oracle form is allowing to user to enter two distinct lines that have same resource and basis type in BOM.
    Currently the Oracle form is allowing to enter the duplicate combination and not giving any error message even we enter the same combination of data.
    As per the customer requirement, they don’t want to validate the data while creating the records but when they try to save the form, in that case it should validate all the records at a time then need to display the appropriate message.
    Customer don’t want to customize the Oracle standard form. Here we have only option to use form personalization or through custom.pll.
    Any idea on how to validate multiple lines which is exist in the form builder at the same session as before inserting the record itself need to perform the validations for all the records.
    Thanks for your help in this regard.
    Regards,
    Thirupathi

    you can write a post script which will do the necessary tasks.
    I mean, once you are done with inserting records into these tables, exeute another procedure which will insert these "extra" records, based on some logic.
    you may not be able use DB trigger as it may generate mutating error or if you don't write it carefully, it will go into recursive loops as you are refering to same tables.
    HTH

  • I want to use a dynamic schema name in the from clause but its not working.

    DECLARE
         vblQueryName VARCHAR2(20);
         vblSchemaName VARCHAR2(20);
    BEGIN
         SELECT CurrentSchemaName INTO vblSchemaName FROM HR_989_SCHEMA;
         vblQueryName:='060_525_020';
         INSERT /*+ APPEND(HP_ELIGIBILITIES,4) */ INTO HP_ELIGIBILITIES
              LVL1ID,
              LVL1Desc,
              LVL2ID,
              LVL2Desc,
              LVL3ID,
              LVL3Desc,
              LVL4ID,
              LVL4Desc
         SELECT /*+ PARALLEL(a,4) */
              LVL1ID,
              LVL1Desc,
              LVL2ID,
              LVL2Desc,
              LVL3ID,
              LVL3Desc,
              LVL4ID,
              LVL4Desc
         FROM
         bold     vblSchemaName.HP_ELIGIBILITIES a
         WHERE
              UPPER(LVL2ID) = 'XX' ;
         COMMIT;
    DBMS_OUTPUT.PUT_LINE( 'Query Executed: ' || vblqueryName);
    INSERT INTO HP_QUERYEXECLOG(QueryName) VALUES(vblQueryName);
    EXCEPTION WHEN NO_DATA_FOUND THEN NULL;
    END;
    I want to create a rules table so that the schema name in front of the table name in the from clause can be controlled by a separate table that is maintained but its not working . Help and your valuable inputs needed for this issue

    I want to use a dynamic schema name in the from clauseyou can alternatively set the current schema as e.g. in:
    declare
       vblqueryname    varchar2 (20);
       vblschemaname   varchar2 (20);
    begin
       select currentschemaname into vblschemaname from hr_989_schema;
       vblqueryname := '060_525_020';
       execute immediate 'alter session set current_schema=' || vblschemaname;
       insert /*+ APPEND(HP_ELIGIBILITIES,4) */
             into hp_eligibilities (lvl1id,
                                    lvl1desc,
                                    lvl2id,
                                    lvl2desc,
                                    lvl3id,
                                    lvl3desc,
                                    lvl4id,
                                    lvl4desc
          select /*+ PARALLEL(a,4) */
                lvl1id,
                 lvl1desc,
                 lvl2id,
                 lvl2desc,
                 lvl3id,
                 lvl3desc,
                 lvl4id,
                 lvl4desc
            from hp_eligibilities a
           where upper (lvl2id) = 'XX';
       commit;
       dbms_output.put_line ('Query Executed: ' || vblqueryname);
       insert into hp_queryexeclog (queryname)
       values (vblqueryname);
    exception
       when no_data_found
       then
          null;
    end;

  • I downloaded apps from the itunes store and tried to sync them to my ipod touch but its not syncing..... please help!

    i downloaded apps from the itunes store and tried to sync them to my ipod touch but its not syncing.i even restarted my ipod several times but it doesnt seem to work....i tried to delete and re-install the apps but that too doesnt seem to work... and while syncing,the apps are shown in my ipod and after the ipod is synced the apps disappear... dunno wat to do .................please help........

    Do you have Restrictions set that prevent adding the apps? (Settings>General>Restrictions).
    What happens whenyou tru to download the apps directly to the iPod.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
    Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

Maybe you are looking for