My full screen view button is missing from toolbar.

Hi all
my full screen button is missing from the toolbar in iphoto11. I can make events into full screen with the arrows at top right of screen but I cannot get individual photos or events to open in full screen. Can anyone help please. thanks.

Which I think is the same in Word. Maybe the OP just uses the buttons on ToolBars.
Will check the Lion problem when I get home, which at this rate may be Christmas.
Peter

Similar Messages

  • How to get back to Full Screen View?

    I have been opening images of one of my iPhoto albums in Full Screen View adding four or five more images from the thumbnails row to see them simultaneously. So they appeared in a smaller size to fit the screen. But now whenever I want to open one of the images of this album in Full Screen View they only show in the smaller size in the Full Screen View window. I cannot get them back to real Full Screen size. Is there a simpel button that I have overlooked or what else could be the problem? Thanks for any help.
    Moriaan

    Yes I have, the slider can go to the max, the image becomes bigger but does not go to the full Full Screen View. When I try an other image from this same album the same thing happens again, in a flash it opens big (full screen) but instantly goes to a smaller size. Even though I open only one image it takes on the size as though it had to share the full screen with five other images. However if I open an image from a different album everything works oke, I press the Full Screen View button and I get the full screen as it should be. Only this particular album where I opened several images in one Full Screen View before gives this problem.

  • Timeline and full screen view in PSE11

    I have read as many reviews of PSE11 as I can find but none have mentioned the Timeline, which I use every day. Does it still exist in PSE11? What about the full screen view and compare side by side view? Do they still exist. If they do, can you still see the image full-size by clicking on it in full screen view?

    Timeline and Full Screen View exists in PSE11 and all the earlier functionalities present in full screen view are present. The Timeline and Full Screen View can be accessed from View menu of Elements Organizer.

  • Full screen view missing from display options in b...

    I've been trying to find out to switch off full screen on the browser on my 5230, it annoys the heck out me. According to the browser help there should be an option for full screen view in the display options of the browser, it's not there though and that makes me feel sad and angry and a little horny :-). Any help very much appreciated.

    Look at this;
    /t5/Nseries-Devices-and-S60/I-ve-lost-the-ability-to-turn-off-Full-Screen/m-p/695076#M210741
    i think same is with 5230.
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • HT1947 If you add music VIDEOS to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from diff playlist, no longer can see Up Next, just go to full screen mode button. Using remote app iphone 5 to play out of

    If you add music videos to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from different playlist, you no longer can see Up Next, just go to full screen mode button. Using remote app iPhone 5 to play out of iTunes. It looks like it works fine for regular music, but for music videos you can't see your up next unless you go back on the computer to change once you've left the screen. When using the remote app, you shouldn't need to go to iTunes on the PC to view or edit Up Next already added. See first image, you can hit upper right and get back to Up Next (second image). Third image is music video, where you can't get back to Up Next, just swap between full screen and not. I hoped 3.0.1 would have the answer, no luck!

    wow, very nice review Makes me want to get a vision for myself.
    WebKnight wrote:
    <SPAN>
    Add the ability to randomly select a new background from a pre selected group of photos every time the player is turned on or each day.
    I would love that feature. I can't stand useing my computer with a single wall paper anymore (I have 500 anime pics that i rotate between every 2 mins ) If you could make the vision rotate background every x minutes or every time the player is turned on, it would be totally amazeningly sweet!!!! (i might have to go out and buy one then :P)
    I just hope that creative has better firmware support with the vision than they have had with the touch.
    Once again, great review

  • Firefox doesn't bring back the menu bar when toggling back from full screen view(F11)

    I have recently been using the full screen view (pressing F11). This works fine until I press F11 again to resume normal view when the menu bar does not appear. This means I cannot see the minimize / maximize / X buttons on the top right. Also, if there is another window open i.e. Word sometimes parts of this show through on the Firefox window. I try to use the latest version and so am currently using version 3.6.8
    == This happened ==
    Every time Firefox opened
    == Not sure - maybe after the latest update?

    No, dont return it, its a glitch in Safari, and VERY annoying. I first would have to Force Quit Safari, but later learned to keep hovering the mouse in the upper right corner, even tho nothing, yeah nothing,,,,is visible.
    Keep the mouse there, and after a bit, you will see the little arrows pointing in, hit them.
    But to keep this from happening again, Im not sure.
    So anybody with further info, please post it here.

  • The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?)  If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my doc

    The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?)  If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my dock has resided at the right margin so all my slider manipulation over countless editing sessions in Aperture has been ingrained to work at the left margin -- but, the vast majority of the time, the HUD overlaps the image I am editing in this 'unlocked' mode. 
    Every occasionally I enter Full Screen View and it positions on the left margin *without* superimposition...(!) My great joy is modulated into aggravation, however, should my tracking cursor drift all the way 'out of bounds' -- to call in the hidden pane of adjacent images sequenced in the library... This dramatically shrinks the Full Screen display and re-locks the HUD; if I toggle the switch to re-xpand the image it re-positions at the right margin!!!!  I SOOoooooo wish I knew how to control the default 'locked' margin of the HUD in Full Screen View...

    Drag it over to the Left. Then lock it there.

  • How can I exit from full-screen View?

    On the View menu, I clicked "Full screen View", but then I couldn't find any way back to normal view. I had to Force-Quit Firefox to escape.
    How do you exit from Full Screen View?
    (I tried Esc, Ctrl-C, and many other key combinations)
    Thanks, PeterR

    Try F11.

  • Organizer jumps to first picture in well after exit from Full Screen viewer

    I'm using PSE 11, and noticed that I'm losing my place in the well after using the Full Screen viewer (F11). For example, if I have 300 pictures in the well, and am halfway through them on picture 150, and I select a few pictures to view Full Screen then press ESC or Exit button to go back, the organizer takes me to the top of the well, with the first picture highlighted. I have to scroll down to find where I was. Is there a way to avoid this?

    The problem mentioned above still seems to be present in PSE13. I find this so frustrating that I am considering abandoning the organizer in spite of having 14000 organised and tagged photos in my catalog. SURELY there must be a fix to this problem!

  • Is there a photo album app that let's you add a photo to an album from the full-screen view of a photo, not the just thumbnail view?

    Is there a photo album app that let's you add a photo to an album from the full-screen view of a photo, not the just the thumbnail view?

    ...It's just really annoying to try to organize photos into an album when you can't see the full screen version of the photo... especially if you have several similar-looking photos, and you can't tell the one you want from looking at 40 thumbnails on an iPhone screen.

  • Why do some videos opened/played from Safari only open to about a 2" square. Can't get a full screen view?

    Why do some videos opened/played from Safari only open to about a 2" square. Can't get a full screen view? I have Safari 5.0.6 and QuickTime Player 7.7. Thanks

    Hi, Daryl -
    If you moved the G4 around to make room for the new machine, that could have jarred the processor loose. It's not unusual for that to happen to an older machine, though it usually happens to RAM or cables, not to the processor.
    Years of heating and cooling can loosen a connection and cause some oxidation of the contacts; subsequent moving of the machine, coupled with just a bit of thumping or torquing of the chassis, can cause the connection to fail. Reseating the connection not only makes it secure again, it usually wipes the oxidation off of the contacts.

  • Excel for mac ver14.4.1 screen goes blank when i change to & from full screen view

    when i'm working on an excel document, if i am in full screen and hit escape to go non full screen the document goes blank.
    if i hit the full screen arrows again, i see my document momentarily and then the screen goes blank again.
    i believe this issue began recently after the most recent version update.  i must constantly save my documents in case i go in or 
    out of full screen view and my page goes blank so i don't lose my work.  does anyone else have this issue and what can i do about 
    it?  my macbook uses os x ver 10.7.5.  not sure if this is an excel problem or an os x problem.
    thanks to anyone who can help me figure this out.  

    Hi，
    As your request is relate to Excel for Mac, better to post your issue to the forum below:
    http://answers.microsoft.com/en-us/mac
    Thanks for your understanding.
    Wind Zhang
    TechNet Community Support

  • Photoshop Elements 11 Organizer: Full screen view of lower quality than with PSE 10 and before?!

    Upgrading from PSE 10 to 11, I noticed that when I watch my images with the organizer in PSE 11 in full screen view mode (F11), while the images load faster, they are shown in a lower quality than in PSE 10 or any other version of PSE that I owned before. In PSE 11, after the initial viewing in full screen (in the "fit screen" mode), when I click with the mouse on an image to display the "100%" view, there is a delay and the program says "Loading...", after which the 100% view in the full screen mode appears. When I then click another time with the mouse on the image to get back to "fit screen" mode, I get an image of better quality than during the initial view!
    So it seems like the program first gives a faster, but lower quality view of the image in full screen mode, and only after the user requests a 100% view, it actually loads the image with full detail, which is then preserved when going back to the "fit screen" view. This is a serious issue for me, because I also use PSE organizer to present my pictures to other people, and I don't want to show them some lower quality versions of my images, but the full quality ones, without having to first choose "100% view" and then go back to "fit screen".
    How can I make the PSE 11 organizer give me a full-quality full screen image right away, as this used to be the case in PSE10 and before?
    (I have both versions, PSE 11 and PSE 10, now on the same computer and tested this to confirm that the PSE 11 initial full screen view is of lower quality than the PSE 10 one. Also in PSE 10, there is practically no delay for displaying the "100%" view afterwards, indicating that the image was loaded with full detail right away.)

    - Update:
    * Adobe's senior support level has replied to me about this issue as follows:
    "Thank you for contacting Adobe.
    When you press the F11 button, Organizer 11 uses the Bicubic
    interpolation mainly because it is less processor intensive compared to
    Bicubic Sharper, and it helps to create the preview on the fly, rather
    than based on the thumbnail cache.
    When you zoom out from the 100% view, Elements Organizer uses Bicubic
    Sharper. This is because Bicubic Sharper is used for image reduction, so
    if the 100% view is larger than the available screen space, it will need
    to shrink. The Bicubic Sharper images may look more crisp however, Like
    any sharpening algorithm, Bicubic Sharper introduces halos and
    edge-enhancement artifacts. Those halos are typically slight, but any
    further sharpening (which you'll need when preparing an image for print,
    for example) will exaggerate them.This is expected behavior. The
    Organizer isn't great for determining exact quality, I recommend you to
    use Elements Editor for this purpose.
    Thank you,
    Bobby Johnson,
    Adobe Technical Support."
    * My reply on this to Adobe is:
    "Hello Bobby,
    thank you for your reply. Now at least we are talking about the same thing.
    Why I am wondering about the choice to use the "Bicubic" algorithm when pressing F11 in PSE 11 is that all previous versions of PSE that I owned (which spans from PSE 6 to PSE 10) did use the "Bicubic Sharper" algorithm right away when pressing F11. So apparently Adobe didn't worry about processor intensity of this algorithm then, and computers are getting all the time more powerful.
    It is true that in some situations, the "Bicubic Sharper" algorithm may introduce halos and edge-enhancement artifacts, as you write. On the other hand, especially on smaller resolution screens, the results of the "Bicubic Sharper" algorithm may look more crisp and lively, while the ones of the "Bicubic" algorithm may look more flat and lack fine detail. This is not only my personal opinion, but as I have brought up this topic in several forums, I can see that I am not alone here.
    So assuming that the question about preferring "Bicubic Sharper" or "Bicubic" as a default algorithm when pressing F11 is partly a matter of taste, and partly a matter of the hardware the user has available, why can Abobe not give the user an option to choose which one he/she would prefer? For instance, F11 gives full screen view with "Bicubic" applied, and CTRL+F11 with "Bicubic sharper"? Or make this an option in the preferences?
    As I am using the PSE organizer also to present pictures to other people (and I know many people who use it that way too), I would like to show them my pictures as sharp and detail-rich as possible. Therefore, I would highly appreciate an option as described above to be implemented in the PSE 11 organizer via an update. It should be fairly easy from a programming point of view, since both algorithms are already contained in the program anyway."
    * If you support this suggestion of mine as stated above, please also contact Adobe accordingly! The more support requests they get for this, the more likely it is that they will implement this update! You may mention my case number 0184046323 for reference.

  • Want an option to having a REAL full-screen view when in writing mode in Word (as there was in 2003)

    For the present Word version (365) I have not found a way to be able to use the entire/total/really full screen estate when using writing mode in Word. (Perhaps there is a way, not discovered by me yet?) But what I want both in Word 365 and foremost in the
    next iteration of Word, is the option to choose - when in writing/editing mode - the entire screen real estate, with NO columns on each side of the screen and with NO Ribbon or other stuff on top and nothing at the bottom of the screen either. 
    This must be possible to establish as an option?! 
    The Word 2003 had such a feature, but it (completely?) disappeared as an option from 2007 and later, as far as I can see, and this lack of being able to choose using a totally blank screen, from bezel to bezel, with no other things than what you write on
    it, is for me and many other writers, who often also use a machine with a rather small screen, a significant missing feature! 
    As I see it, the real estate that is "given away" to give space to the two vertical columns (to give a for me the unnessary and unwanted "impression/illusion" of having to deal with a sheet of paper placed on the middle of the screen),
    this real estate should instead be used as a typing "place". In other words: Many writers and others would really like to be able to use ALL the screen from left to right and from top to bottom to be filled with letters and words! 
    Can and will this technically be done? So that we again (as in 2003) can be given the option to choose (real) full-screen view? 
    I would really like to get some positive feedback from developers and decision makers in the Word developer team at Microsoft about the possibility of re-establishing this now seemingly missing option. 

    Hi,
    Thank you for your feedback.
    As far as I know, this is currently not available in Office 2013. We are sorry that at this time we are not able to edit documents in a full screen mode that "with NO columns on each side of the screen and with NO Ribbon or other stuff on top and
    nothing at the bottom of the screen either. "
    We have passed this information to the product group for consideration for a future product or update.
    Please be assured that our developers strive to capture Microsoft users' ideas and are working hard to create a more powerful and easy-to-use product.
    Thanks for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How to Remove maximize/minimize/close top-bar in full-screen view [MAC]?

    Hi.
    My Q. is pretty much as the title implies.
    It's a small thing, and maybe kind of trivial,
    but I'd like to know how to get rid of the maximize/minimize/close top-bar in full-screen view in Adobe Reader on the Mac.
    I am definitely in fullscreen view [I hit command+L], just so you know,
    but I still have that top grey bar showing with the maximize/minimize/close buttons [the red, yellow, and green].
    As I said, kind of a trivial concern, but I'd like to know how to hide that in full-screen mode.
    I tried searching around a few places for an answer, but there is nothing too obvious.
    I can't find anything in the full-screen preferences of reader either. Maybe I'm missing something...
    Thanks!

    Version 11.0 , so I guess that is the most recent?
    I think this is an application-specific problem too, because I don't encounter this in full-screen mode with other applications.

Maybe you are looking for