My function key isnt working.

 i press it and no mode change. had to hold down key to type this.

Please identify your HP notebook with its product name.
Go into the BIOS and enable the action keys. I can't tell you specifically how to do that because you didn't identify your notebook PC.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Windows 7 Brightness and Function key not Working Properly

    i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it  came with windows 8.1 preinstalled than i installed windows 7 ultimate.
    i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
    2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

    Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

  • Toshiba Satellite C850-F12S Function Keys not working

    I recently formatted my laptop after the OS was corrupted by a virus and reinstalled windows 7 but now my Function keys that enable me to adjust brightness, volume and turn on wireless are not functioning, They only work when in BIOS setup and even when I tried to enable them to be standard F1-12 or special function keys they still dont work after starting windows. This computer has no flash cards for toshiba and i dont know which drivers to look for for this specific model. I also lost toshiba eco-utility and its player. How do i get all this back without losing my data?I have partitioned my hard disk.

    Hi Eldorado
    Thanks for your suggestion. Have done as you said but still have the problem.
    I've managed to get rid of the TouchED error dialogue by uninstalling the Touchpad on/off utility, but I can't get the function keys to work again. The problem appears to be that the Common Modules drivers are not reinstalling properly - the software (thotkey.exe) that operates these has to be within this. I have tried extracting the cab files for the Common Modules but nothing with let me into Toshiba's cab files to see if they are there so that I can copy them across manually.
    I can live without the function keys on my machine, but this is a pain - especially when I'm sure the problem has a simple solution.
    Cheers
    David

  • ITunes Media Function Keys Not Working

    So I picked up a new MacBook Pro Retina 13" a week or so ago, and it's going great so far, except for one thing. It seems that the Media function keys aren't working in iTunes?
    I checked under the keyboard preferences to ensure the "standard function" keys box wasn't checked, and it wasn't. All the other functions keys are working properly except the back, play/pause, and skip keys. I tested the keys with other functions, such as setting a shortcut to the F8 key, and it recognized the input, so its not a hardware issue.
    I tried to find help elsewhere, but most people seemingly just had that box in the settings checked, which wasn't the problem for me it seems.
    Any suggestions?

    lions99 wrote:
    Hey guys,
    I see that most of you are having a issue with the function keys.
    Try this- http://goo.gl/gdlS3?
    This is a hotfix for this issue. Now keep in mind this only supports
    Windows 7 Enterprise
    Windows 7 Home Basic
    Windows 7 Home Premium
    Windows 7 Professional
    Windows 7 Starter
    Windows 7 Ultimate
    So if you don't have this, then don't run this fix.
    Also, If you guys can give me your product # and complete model name of the notebook you have, so I can send you a link to update your BIOS.
    Here is a link to show you how to find your product #- http://goo.gl/vYKya
    THX
    Thank you for your help, but another person had already answered me. =]
    After I re-installed the keyboard drivers, the "fn + " keys became functional again. The driver i installed was "HP Quick Launch Buttons" or just "sp49456" if you want to know.
    Thank you for your help, I am very pleased with it.

  • E545 and Function key not working

    Any help here is apprecited. My function (Fn) key is refusing to work at all. None of the special features are able to be used. I've checked all my drivers, and followed the instructions in the User Guide, but some of the options described in the guide are even showing on my computer.
    I'd love for some help on this issue, as the computer is pretty worthless right now.

    Hi Jamesbjenkins,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with keyboard function keys not working on your ThinkPad E545.
    Is the system updated with all the latest drivers and application? To confirm with I request you to run ThinkVantage system update tool. This will search for all the required drivers and application for your system and will update.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Function keys stop working

    For a while now, I've been encountering a problem where functions keys stop working. Pressing F8 (for spaces) or F12 (for widgets) will simply yield a "bonk".
    Another symptom is that processes which open on a desktop other than the current one will fail to open because the desktop seems reluctant to switch.
    I know other people have experienced similar problems because there is a post about spaces' keyboard shortcuts not working. The issue has not been resolved for many many weeks now.
    I use a logitech wireless keyboard and trackball (with the logitech control application installed)
    Sometimes this error will occur immediately after booting up. Sometimes it will go for days working fine. I consistently have 4 applications running:
    - iTunes
    - Thunderbird
    - Firefox
    - Adium
    The other most common apps I run are:
    - Quicktime
    - Aperture
    - iMovie
    - Preview
    Yet Another symptom of the problem is that the machine will refuse to shut down or restart. If I kill every "windowed" process in Activity Monitor, the machine will STILL fail to shut down. Ultimately, I have to do a 5-second hard power-down.
    Any ideas/suggestions would be greatly appreciated.

    I am running into the same issue
    I use a Logitech Wireless Mouse.
    The switch Spaces keys, F9/F10/F11 for Expose are not working either, the Mute/F10 Vol Up, Vol Down F11 and F12 work as does the Eject button.
    F18 Show Dashboard or F4 Show Dashboard don't work either.
    Most frustrating

  • New Apple Wireless Keyboard Function Key not working ON 10.5.8

    Tried updating keyboard os, disconecting reconnecting. Selecting/deselecting option in keyboard options.  power off and on
    Cannot get function key to work
    Thanks

    found answer here- my wireless keyboard model is  MC184LL/B
    http://store.apple.com/us/question/answers/product/MB110LL/B?pqid=QXXHTX4T747AAF PXKHXCC72CYAXYU7XXYUPK9UFC74K27FPKF
    The Function keys will not all work properly on 10.5.8, all the other keys will be fine.  The previous model MB110LL/A would work with all the Function keys on Leopard or Snow Leopard.

  • Satellite L850 - Special function key not working properly

    Hi Everyone,
    I had Satellite L850 (pskg8a-07f001) running windows 8 64 bite for just 2 months.
    Just within this week, the special function key not working, each time I start the pc, i have to go into toshiba desktop assist then function key then click ok, it will working.
    But the touch pad has been set as enabled, also under keyboard setting has been set as special function mode. But don't know why each time start the pc have to go into function key box then click ok.
    When I bought it everything is ok, i can use the special function key to turn up and down the volume and disable wireless...etc
    Please advise. Thks a lot!

    Take a look here:
    Function key changes in Satellite and Qosmio 800 series
    http://aps2.toshiba-tro.de/kb0/TSB2903E00000R01.htm
    You can use the traditional FN + F key mode or just an F key mode.
    This can be enabled and disabled in BIOS or the HWSetup
    In BIOS go to Advanced -> System configuration -> Function key mode
    This mode can be changed
    Also be sure that Function Button option is enabled too

  • Function Keys Not Working Regardless of "Use all f1.." Being Checked or Unchecked

    Hi
    If someone could help me I'd be really appreciative. I recently got some parts repaired by apple, the trackpad was replaced and a small wire replaced too which was to do with the keyboard connection. Since getting my macbook air back everything works fine except my function keys don't work. When the "Use F1, F2 etc ... as standard function keys" is checked the only function keys that work are f11 and f12 as they should as these are the only shortcuts set up to show desktop and show dashboard, respectively. However when I come to uncheck "Use F1, F2 etc ... as standard function keys" noting appears to happen the f11 and f12 act no differently as when it was checked and the rest of the function keys remain unresponsive.
    Trying to press the keys with the Fn key pressed also makes no difference.
    Thanks for reading
    Oli

    It looks like a faulty repair. You should take it back to Apple and have it redone.

  • F12 function key not working on my Pavilion DV6 7170er

    I'm runung windows 8 X64 bit version. i'm using win 8 since few months, all that time function key work properly until hp support assistant update my system bios version to f.24 automatically .after that cause that problem f12 key is not working it's indicate amber lite every time,can't switch on wifi, if wifi on it have to turn into white clolor.all other function keys are working properly.i checked evety thing, device manager saying wifi adapter working properly but windows 8 mobile center showing it's turn off.i checked via bios system components it's showing wifi adapter "PASSED". hp connection manager programs can't open it's hanging long time and after that showing error massage - error code 80080005 .
    Please if any one have suggest let me know...
    Thank you...

    gaurian82,
    I’m glad to hear that everything is working.
    Thanks for posting the solution that you found.

  • Some of the function keys dont work

    i just bought a new hp probook g2 notebook pc and it seems that some function keys dont work like the voice up and down are working but brightness keys arent .

    Vic, welcome to the forum.
    The error message BIOHD-2 normally indicates that the hard drive has failed.  Here is a guide to help you run the SMART test for the drive from the BIOS.  If you get a similar error message, you should replace the hard drive.  Also, here is a guide to help you with Recovery of the system after the drive has been replaced.
    Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • FN function keys not working on dv7-3188cl

    I recently formatted my laptop to windows 7 ultimate and since then can not get my function keys to work.
    I've reinstalled drivers that I thought might work and nothing.
    When I could no longer adjust my brightness is when I noticed that my function keys were not working. Is there any other way to adjust the brightness on my laptop besides the function keys? If so I have not figured it out.
    This question was solved.
    View Solution.

    Hi:
    Make sure you have installed the Intel chipset driver and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76994-2&cc=us&dlc=en&lc=en&...
    Make sure you have installed the NVidia graphics driver and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3&cc=us&dlc=en&lc=en...
    Then install this software.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-74407-1&cc=us&dlc=en&lc=en&...

  • X1 Carbon 2014 Function keys not working in windows7

    Hello.
    I have a brand new X1 carbon(model: 20A7-005KMD) that was installed with our company image, running windows 7.
    Alle drivers in device manager has been installed, and system update is updated.
    The carbon has the "touch" function keys and they only partly work.
     When booting the computer i can swap between the different functions, but when i get into windows, its is "stuck" with only the options F1-F12. The F keys work, but i cant change settings by pressing the FN key on the left side og the touch display, and get sounds/brightness settings etc.
    as said, this works just fine during the boot.
    Any ideas what can be causing this and even more important - a fix?

    Hi Guys,
    We are currently having the same issue on the X1 Carbon 20A7 models (20A7000LAU). In BIOS or during boot the function changing works without issue (limited to two (2) function screens how-ever), it stops working once you log in. If you then lock the computer you can change the functions, but then once you unlock the device, it stops working.
    When the drivers are installed and the device is restart we get the above behaviour, if we uninstall the drivers the function keys will function as expected till the device is restarted. This is very strange behaviour.
    On a device received by Lenovo there are 4 function changes/screens in total, we can only make two work temporarily as listed above. We have tried the following.
    1. MDT 2013 Delivered Windows 8.1 x64 image image. All drivers/software components installed from the lenovo website. We receive above issue and cannot resolve by uninstall/reinstalling.
    2. Vanilla Windows 8.1 ENT x64 image installed from Microsoft Volume Licensing portal, installed all drivers supplied from the Lenovo Website. The same behaviour is seen as above and is reproducable.
    3. We have als compared all drivers/software installed on the factory supplied model to a manually built device, still the above behaviour is witnessed.
    4. We have manually exported drivers from the X1 Carbon device from lenovo and injected them into the vanilla Windows 8.1 ENT or PRO newly imaged device, still the same behaviour above.
    Please let me know what I'm missing, I'm certain this is a bug in the drivers for this model.
    Regards,
    Nic

  • Function Key not work when using jre1.5

    My application was based on JDK1.3 to develop and JRE 1.3 is using in the client side.
    In the application, function keys are the shortcut and it is working fine based on the above setting.
    Since JRE 1.5 is encouraged to be used in the future, we try to use it to run our application. But we find that all function keys are not working.
    I am not sure the fact, but I get the following exception sometimes in the console:
    Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException
    at javax.swing.LayoutComparator.compare(LayoutComparator.java:61)
    at java.util.Arrays.mergeSort(Arrays.java:1307)
    at java.util.Arrays.mergeSort(Arrays.java:1296)
    at java.util.Arrays.mergeSort(Arrays.java:1296)
    at java.util.Arrays.mergeSort(Arrays.java:1295)
    at java.util.Arrays.sort(Arrays.java:1223)
    at java.util.Collections.sort(Collections.java:159)
    at javax.swing.SortingFocusTraversalPolicy.enumerateAndSortCycle(Sorting
    FocusTraversalPolicy.java:119)
    at javax.swing.SortingFocusTraversalPolicy.getFirstComponent(SortingFocu
    sTraversalPolicy.java:425)
    at javax.swing.LayoutFocusTraversalPolicy.getFirstComponent(LayoutFocusT
    raversalPolicy.java:148)
    at javax.swing.SortingFocusTraversalPolicy.getDefaultComponent(SortingFo
    cusTraversalPolicy.java:502)
    at javax.swing.LegacyGlueFocusTraversalPolicy.getDefaultComponent(Legacy
    GlueFocusTraversalPolicy.java:131)
    at java.awt.FocusTraversalPolicy.getInitialComponent(FocusTraversalPolic
    y.java:149)
    at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFoc
    usManager.java:318)
    at java.awt.Component.dispatchEventImpl(Component.java:3841)
    at java.awt.Container.dispatchEventImpl(Container.java:2024)
    at java.awt.Window.dispatchEventImpl(Window.java:1766)
    at java.awt.Component.dispatchEvent(Component.java:3803)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
    at java.awt.SequencedEvent.dispatch(SequencedEvent.java:93)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:234)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:163)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    I try to compile my code using JDK 1.3 and 1.5. Actually, there is no compilation error.
    Please help me if you know the fact or solution.
    Thanks a lot!

    The supported Software in iPlanet's Portal Server is JDK/JRE 1.2.2_07 and JDK 1.2.2_09(in SP4). Starting with JDK1.3.1_01, applets are handled somewhat differently. Enable Java and look at the error messages in Java Console to find why the Netlet is not loading in JDK1.3.1_02. The issue might be with two JRE's or with your cache setting. Hope this helps you.
    Thanks,
    Raj_indts
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support

  • Function Keys not working properly after recent update today.

    Sat C855 - today I downloaded the 2 recent updates & now my function keys aren't working properly. Anyone one else have that problem? What can I do?

    Hi! Night shift here! You can find the full model number on the bottom of your laptop. Jerry might not log on again tonight!
    Dokie!
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
    Attachments:
    Capture40.JPG ‏366 KB

Maybe you are looking for