My Function Keys which are F7 F8 F9 do not work

After I have installed Snow Leopard I opened Itunes,i pressed the F8 button which is play it did not work,pressed F9 which is the fast forward or next song didnt work,I tried playing a couple of songs and pressed the F8 which is previous didnt work as well.
I went to the keyboard settings and checked the Use all F1,F2 etc. keys. Then I tried it didnt work I unchecked it still F7-F9 arent functioning.
What can I do?

Unfrotunately no. I haven't added anything to the system externally. I thought by totalling wiping the drive and starting from scratch any bugs would have been worked out. I didn't test the function keys before I updated the system to the lastest update so I am not sure if it was the update or not. I do know they were working and then suddenly they weren't. Maybe I hit a set of keys that disabled them but I haven't been able to find that combination again to reenable them.
Thanks for the input.

Similar Messages

How to sort on MULTIPLE Keys which are elements of VO's stored in list

How to sort on MULTIPLE Keys which are elements of VO's stored in a list.. without disturbing the ordering done by previous sorting...?
Is there any best soln for the same...
Thanks..

How to sort on MULTIPLE Keys which are elements of
VO's stored in a list.. without disturbing the
ordering done by previous sorting...?Do you mean you want to do a heirarchical sort? Where the secondary key is only used when the primary keys are equal etc.? That's pretty trivial. If the primary keys are equal, check the secondary key. How do you sort words in alphabetical order? It's the same process.

Contact persons which are created in ECC but not replicated as employee

Dear Experts,
Where can i find the contact persons which are created in ECC but not replicated as employee in the CRM.
For example i created the 10000 personal no in that 800 should replicate to the CRM from ECC but only 600 is replicated and remaining 200 i have to find in the ECC to replicate again running PFAL.
If i have to down lode and compare in excel please provide the details. in which tables i have to down load in ECC and CRM which what input.
Best Regards,
Siva Anjith

Dear Gurus,
Can you please help to resolve my replication issue.
Best Regards,
Siva Anjith

Running Function Module in Background with Update Task is not working

Hello Friends,
I have a "Z" Report Program where I am running this Report in Background using JOB_OPEN, JOB_SUBMIT, JOB_CLOSE. I am calling this in BADI.
In this Report I am calling another Function Module PRICES_POST which is a standard Function Module and in this FM there is another FM 'CKML_UPDATE_MATERIAL_PRICE IN UPDATE TASK'. Now when I am running the BADI these values are not being updated.
Friends I would like to know whether can we run Function Modules which are included with UPDATE TASK as Background Job program?
Kindly help me in providing your valuable suggestions in proceeding further.
Thanks and Regards
Pradeep Goli

Usually the sequence of CALLs in your report should look like
CALL FUNCTION 'CM_F_INITIALIZE'
    EXPORTING
      msg_on_screen = c_x.
CALL FUNCTION 'CKMS_BUFFER_REFRESH_COMPLETE'.
CALL FUNCTION 'PRICES_CHANGE'
    EXPORTING
      actual_bdatj = f_matpr-pp-bdatj
      actual_poper = f_matpr-pp-poper
      bukrs        = p_bukrs
      budat        = p_date
      xblnr        = p_xblnr
    TABLES
      t_matpr      = t_matpr.
READ TABLE t_matpr WITH KEY pp-xerror = ' '
                            TRANSPORTING NO FIELDS.
IF sy-subrc <> 0.
    MESSAGE i046(ckprch).
ELSE.
    CALL FUNCTION 'PRICES_POST'
      EXPORTING
        i_bktxt    = p_bktxt
        bukrs      = p_bukrs
        lis_update = 'X'
      TABLES
        t_matpr    = t_matpr.
ENDIF.
COMMIT WORK.
If you forget the COMMIT-WORK each and every FM called in UPDATE TASK will not be triggered.
Regards,
Raymond

Key combination Shift+Alt+Cmd+D does not work in Indesign CC, why not?

Key combination Shift+Alt+Cmd+D does not work in Indesign CC, why not?

Is it assigned to something in the shortcut set you are using?

6 keys "5tgb-[" on mac air keyboard do not work or act up

6 keys: "5tgb-[" on mac air keyboard do not work or act up. No known damage.

I took it to the Apple store and they checked it for free. They stated that they found liquid inside (to my great surprise), which costs $800 to fix. I declined, since a new one costs $1100. Even AppleCare would not have covered it, so it was not a problem that my 3-year AppleCare just expired.
I find it quite a coincidence that 2 of us had exact same problem within a week and we both posted it.

Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either.

Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?

Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?

I down loaded the new CS2 and it asking fir my new serial number which I put in but will not work what do I do?

loaded the new CS2 and it asking fir my new serial number which I put in but will not work what do I do?

Download the installer from Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Install and use the new serial number provided at the link above. Your existing serial number will no longer work.

Function key defaults are not working

I've ran into an issue where the default function keys no longer work. The F1 key for instance does not decrease my brightness, nor does F12 increase my volume. All of the function keys will produce a "thump" sound from the Macbook Air, like I've typed a bad keystroke, or an invalid keystroke for a text field.
What I've done:
1. The "Use all F1, F2, etc. keys as standard function keys" is Unchecked in System Prefs
2. Rebooted, and cold booted many times
3. I've reset PRAM and SMC many times (probably 10 each)
4. I've clean installed OSX Mavericks and the stock install shows the same symptoms.
I'm hesitant to believe this to be a hardware issue because the keys themselves will work if I manually set an action for them (a custom shortcut to open an application for instance).
Has anyone else seen a similar problem or know of any other things I can try?

See if a Safe Mode boot helps.
Startup your Mac in Safe Mode
A Safe Mode boot takes longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () drop down menu then try the keyboard.

Some keys of keyboard like t ,y f10 not working in my hp pavalion g series

sir,
plz give solutions for my hp pavalion g series laptop some keyboard keys like t ,y and f10 not working .
thamking you
Aamir Khan

Hi,
Can you provide the full model number for your laptop? If you don't know the full model number, see The HP Guide To Finding Your Product Model Number.
Also, what Operating System are you using? Windows 7, Windows 8?
I've provided some links below for Windows 7. First do a hardware test and see if the keyboard is functional, see Testing for Hardware Failures , and look under Component tests and do the keyboard test. If there is a problem with the keyboard that requires service, it should come out in that test. Also take a look at Notebook Keyboard Troubleshooting, and since you are having problems with specific keys, look at the Stuck Keys section, and try to reinstall the drivers which is the last section of that document.
Good Luck,
R
Although I am an HP Employee, I am speaking for myself and not for HP.

Hot key(Ctrl+F1) for More field help not working

Hi all,
I am facing a strange problem. When I have run my WD application there will be some UI elements on the browser say one Input field. If I want to check the More information about this input field, I have to make a right mouse click on it and the More field help appears. By this I am getting the technical information about the UI element.
The Hot key to do this is Ctrl+F1. It's not working with in my server, it's just open the Internet explorer Help. Although I am able to use this Hot key in an other server to find the More field help.
Can anyone suggest me why I am not able to get the More field info from the Hot key Ctrl+F1 in my server. Is there any setting which needs to be made in my server.
I have also tried out to check the HandleHotKeys property of the ROOTUIELEMENTCONTAINER in my view but it's not working for me as well.
Please suggest what will be the reason.
Thanks
Sanket sethi.

Your right, I was thinking the opposite - that it wasn't working in 7.0.
Perhaps this change is becuase F1 now launches the Help Center as of 7.01 and higher.
I'm not sure there is a hot key associated with the more field help any longer. I checked the javaScript and F1 is tied to the "help" event (the help center). Alt, Shift or Ctrl - F1 are all routed back to the browser help functionality (bHelp). See this screenshot:
http://farm2.static.flickr.com/1382/4606421952_5824ee1507_o.png

I bought my iphone 5 in Houston Texas May 15 2013 IMEI Nr. 013428009645399.The problem is that in the Greece the country which I live the 4G is not working.If you have any solution for this problem pls. let me know.My email is philcoueth@yahoo.gr Thank yo

I bought my iphone 5 in Houston on May 15 2013.
IMEI 013428009645399.The problem I have is that in the country
which I live GREECE the 4G is
not working.Please if you have any solution for this
problem let me know.My email is [email protected]
Thanking you in advance
Philip Couridis

iPhones purchased in the US are NOT guaranteed to work with 4G bands outside of North America.
For what crazy reason did you purchase an iPhone in the US if you live in Greece? If your phone needs servicing, it will have to be brought back to the US. You cannot get that phone serviced in Greece.

HT2638 since updating iPhoto it has ceased to open. i have tried to Hold down the Command and Option keys on the keyboard but it does not work. iPhoto still does not open

Since updating iPhoto it has ceased to open. I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library, but it does not work. iPhoto still does not open. can someone please help?
thank you

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
Happy Holidays

Move tool issue : Command key + mouse dragging for moving any layer not working in PS CC

I'm trying to move a layer within the document by holding command key and mouse dragging (mouse cursor not above the layer) is not working at all while using move tool. Suddenly this functionality stopped working. Now I have to place my cursor on layer to be move and drag with mouse. Also pressing command key changing auto select option from layer to group.
Please help.

Usually when a tool is not working as expected, a Reset of that tool might be the answer.
Select the move tool in the toolbox,
Go to the move tool icon on the top left of the screen (just above the toolbox in its' Option bar) and Ctrl-click on it to get the Reset menu.
Click on Reset Tool.

Photoshop CS6 Problems- Shortcuts are Stuck! Lasso Does Not Work!

Hi there! I'm a Mac user with a Cintiq 12WX tablet, and I just upgraded to Photoshop CS6. I use it primarily for art, but I've come across some problems that have really interrupted my workflow. A lot of the time, certain functions seem to not work or get stuck. Here are my problems specifically:
1. My Undo shortcut is set to Command+Z. Some of the time it works fine, but most of the time I keep hitting the command and nothing happens! So if I want to delete a brush stroke, I usually have to tap multiple with my stylus and make more strokes in order to get Undo to work. Frustrating!
2. The lasso tool works sometimes, but a lot of the time it doesn't select anything. So I have to keep repeating the stroke until it does select.
3. Sometimes, the keyboard shortcuts just don't work! And even if a tool is selected, I can't do anything with it!
These problems are all completely random, I have no idea what triggers them. I've read of other people having similar problems, but I have yet to find a solution. Nothing like this happened in CS5. Does anybody know how to help me? I make me living with art and these problems have really slowed me down. Thank you!

What OS Version are you using?
It sounds like you are on MaCOS, did you install the WhiteWindowWorkaround plugin to avoid the known MacOS bugs?

My Function Keys which are F7 F8 F9 do not work

Similar Messages

Maybe you are looking for