My G-5 is not reading a cd. What do I do?

My G-5 does not read the cd.

Have you tried inserting another CD to see if it works? Is the CD dirty or warped? Can you try it in another machine to see if it works?

Similar Messages

My CD Drive in my Macbook is not reading CD. What can I do to resolve this?

The Macbook is about 4 years old and has a Matshita CD-RW CW-8221 Drive in it. It won't play movie's or read software. I am thinking that the drive may just be dirty and need to be cleaned. Any thoughts?

Will it read audio CDs? (In other words, is it just a problem with DVDs, or are CDs not read, either?)

HT3986 i can only acess the internet on mac but when i switch over to windows 7 it does not read my wifi what will i need so that i can use internet on both?

what is the answer to this?

Well, the answer was to read the Boot Camp Documentation, but as you have passed that phase.
Reboot into OSX, run Boot Camp and download the Windows Support Software: Reboot to Windows and install them.
manuals.info.apple.com/en/boot_camp_install-setup.pdf

MBP Not Reading HSF+ External HDD/Bootcamp Win7 Is ?!?!

Hi - this is a strange one to me. After creating separate partitions (NTFS/FAT32/HFS) for my LaCie Ext-HDD, I been able to shuffle data between my Mac and PC computers (teach in a lab). However, one day - for no specific reason - all drives except FAT32 would not read. But what's more odd is that the HFS is readable only in Win7. What's more strange is that the NTFS drive is not, and is only readable in OS X (via some 3rd party software).
Has anyone experienced an HFS HDD that's not readable in OS X (Snow Leopard)?
Any advice on how to retrieve my data in OS X (the BC-Win7 is not large enough to support the data transfer) ?
Thanks so much in advance!
ACV

I have a similar problem... tried to install winXP on an external HDD (read in FAQ after there you are not suppose to ><)
anyway after I installed XP my mac cant find any bootable partitions (had OSX 10.6.3 and Win7 working perfectly)
the wierd thing is when I boot off the intallation CD I can only see the Win7 partition and it says its empty.. even after I removed the HDD from my mac and hooked it up as an external HDD to my mac desktop the Win7 partition came up empty aswell but the mac partition was nowhere to be found...
I really need my data back from my Mac partition I dont really care about what was on the Win7... please someone tell me there is a way!!

Barcode not read by scanner

hi all.
i have create programe for printing barcode.programme running fine and i can print barcode on laser printer.but when i try to scan from barcode reader.its not reading by scanner.
whats problem with it????
i used following tutorial .
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/newBarcodePrintinginSAPusingSmartforms

>
Usha Kommalapaty wrote:
> Hi,
>
> Software to be installed in all desktops in order to enable printing of barcode from their systems.
> So, for printing barcodes on laser and dot matrix printers, additional software should be made available on all desktops.
Not True, new barcode technology does not need any additional software in the desktop. (Refer Introduction part [here|https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/newBarcodePrintinginSAPusingSmartforms])
What symbology you have used, did you check whether your scanner supports the used symbology?
Regards
Karthik D

Adobe Media Encoder for CS4 error Could not read from the source

Hello,
I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
- Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
- Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 16:10:34
1/21/2009 9:50:25 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been
deleted.
Thank you
Art

When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.

When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up. when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
Satish

Hi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

I have a brandnew 7th gen classic ipad, it does not read in my itunes anymore. i bought it cause apple was suppose to be good, now i am lost as i just want my music, any help. tried the rec. steps to fix it and nothing

let em elaborate more, the unit is less than 5months old, i bought it just for music, i use to have a lot of cds, well it does not read anynore in my computer nor the itunes programe, i reset it, i put it to disk mode, i down loaded the newest itunes program, i want to know how to fix this as i paid apple good money for a product that died after 5months, for real.
this is bad business and i need some help

Does the iPod work okay otherwise apart from not being able to connect with and communicate with iTunes?
Have you tried connecting the iPod to another PC or Mac running iTunes to see if it is properly recognized there?
Is iTunes up to date on your PC? Does it appear in Device Manager when you plug it in? To access Device Manager, click start, right->click on Computer (or My Computer in Windows XP) and choose Manage. When the window opens, select Device Manager in the left hand pane if necessary.
Any unknown devices listed or does the iPod appear anywhere under USB Host Controllers?
B-rock

My PC is not reading my itunes music files, all I get is '!'

Hi, my computer recently crashed and I had to recovery the HDD and lose all my materials, but I still had all my itunes media on a separate drive. Anyway, I redownloaded itunes and now I added a folder of over 4800 songs, all either individual mp3 files or albums in folders. Now that all the albums are up (I lost a lot of the album covers too) I am having trouble playing music on itunes.
Whenever I click on most songs, I get a '!' saying that I have to now search for the file because it cannot be found. I have to search for EVERY song before it can find it. I have over 4800 songs, so I can't realistically search for EVERY ONE. Under 'Preferences' I went into "Advanced" and chose the folder where my songs would be read from. Yet still I have this problem. Funny thing is that it doesn't do it for EVERY song, but I would say about 90% of them. Why is my itunes not reading my files? I have the latest version of itunes on my PC and there is no problem with any of my mp3 files as they are all well and play fine on my ipod. The strange thing here is that all of my movies play just fine, I have 34 digital copy movies on my itunes. I have Windows 7.
Please help, this is a really annoying thing to deal with!

Since you mention PC, I'm guessing that you are referring to a Windows machine. If so, then see this support document. http://support.apple.com/kb/TS1538

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!

fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan

TS3694 My computerwill not read the lastest version of i tunes. i lost theold version how do i get it back to hold my music again???????help

My computer will not read the lastest version of i tunes ,i don;t know how to get the old version b. pleae help. i can't get my music back on my computer

what do you mean it will not "read" the latest version? you downloaded, installed, and nothing? it doesnt open?
does your computer meet the minimum requirements for itunes 11?

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/

My G-5 is not reading a cd. What do I do?

Similar Messages

Maybe you are looking for