My G Drive mobile did not popup on my desctop

My G Drive mobile does not popup on my desctop please help
david

1. verify on another Mac first. and another port.
2. very likely dead SATA card
read about it here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

Similar Messages

  • After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times).  Any help?

    After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times).  Any help?

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

  • I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

    I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
    I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
    Thanks so much!

    To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
    For an admin password:
    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you cannot do the above then try this:
      1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command until
         you do.  If after seven tries you still do not receive a "Filesystem OK" message,
         then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    How to reset the OS X password without a startup CD:
    Reboot into Single-user Mode. Enter the following and press RETURN after each command line
       1. Type fsck -fy
       2. Type mount -uw /
       3. Type passwd <username>
    I have never tried this method myself.

  • My mobile did not receive any msg? What else to be done?

    I am doing HTML->Webservice Scenario, where in i got Result like as shown below, but my mobile did not receive any msg, yet. I tested twice,thrice, but still my mobile did not receive any msg of this sort.
    what else to be done for my mobile to receive msgs?
    ==============
    Result:
    http-Status:  200 OK
    Payload:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns1:SupportResponse_mt xmlns:ns1="http://myqnx.com/demo/HTML"><MessageStatus><FromEmailAddress>[email protected]</FromEmailAddress><ReceiptantMobileNumber>9886549356</ReceiptantMobileNumber><Provider>Hutch</Provider><State>South</State><Status>Message has been sent successfuly</Status></MessageStatus></ns1:SupportResponse_mt>
    Help is highly appreciated.
    Thanks

    HI,
    You can ask your organisation or some BASIS consultants in your place.
    Because it is telling me that you need to apply some corrections to your system.
    The note info is here-
    >>   from SAP Note
    <i>Symptom
    The system issues this error message without explanation.
    Reason and Prerequisites
    This problem is usually caused by an incorrectly configured HTTP destination. The missing explanation is due to a program error.
    Solution
    Implement the attached correction instructions or import the corresponding Support Package.</i>
    Regards,
    Moorthy

  • I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

  • I sold my old mobile did not Logout of the game center

    I sold my old mobile did not Logout of the game center and Buyer uses my  account in game center and Play games with me in my account ..
    I changed the apple id and PIN .... same problem
    What I do ?

    Can't connect to the iTunes Store
    iTunes Store error (-3212)??: Apple Support Communities

  • My hard drive crashed. I slaved the old drive, but did not make a backup of my bookmarks. how can I transfer my bookmarks from the old drive to the new one?

    My original hard drive was replaced due tom multiple errors. Before it crashed completely, I installed a new hard drive and slaved the old one to allow me to access the data and transfer it to the new one. I did not backup the bookmarks. How can I pull the old bookmarks from the old drive to the new installation drive???

    Since you said you were able to transfer the data from your old drive to the new one, you probably still have the old Firefox Profile. Please read this article to see if it helps:
    http://support.mozilla.com/en-US/kb/Profiles

  • T410 System Update 4 - Intel Rapid Storage AHCI Driver "Package did not install" Error

    I've not had a problem with system Update 4 until today.  I went out to check for any updates and there was only one (Optional) listed so I went ahead and tried to install it.
    It is Intel Rapid Storage AHCI Driver for Windows 64bit.  The installed version is 9.5.7.1002 and the version trying to be installed is 9.6.0.1014.  The progress bar indicated it downloaded and tried to install, but ended with the error, "1 Package did not install."  Not a lot of help in that statement!?!
    Has anyone had a problem like this before?  Any idea how to "fix" it so I can install this update?
    I even tried once with MS Security Essentials, Windows Firewall and UAC turned off with no difference.
    System details are in my sig, below.
    Thanks for any help,
    Gary A.
    ThinkPad T410 | ThinkCentre M83
    Solved!
    Go to Solution.

    Yup, that's what I ended up doing - download and install the standalone file.  Installed just fine
    Gary A.
    ThinkPad T410 | ThinkCentre M83

  • Installed Leopard on drive, but did not wipe it clean

    I installed Leopard on a partitioned drive and didn't erase everything on it. I thought I did, but apparently not. Whenever I restarted with the install disk in the machine, it started up in Leopard, all nice and new. Then when I restated with the disk out (held down the mouse button on restart), it starts up the way it it was in 10.4.x with the same partitions and on the partition that has Leopard on it, I can see under Users the new install as a username w/the usual directories of Desktop, Documents, Downloads, etc.
    Problem is, the original startup drive has been messed around with so much, I think I deleted System Preferences or I can't run the new System Preferences...dunno.
    Is there some way to target a startup disk when you don't have system prefs? I know I have what should be a viable startup disk since there's an OS installed on the drive. Hope that makes sense.
    Thanks in advance

    Restart your computer, and press and hold down the option key before the Apple logo appears.
    You should then see all available startup partitions.
    Cheers,
    Rodney

  • My old computer crashed a few days ago. And my backup external drive apparently did not save my old Firefox profile, but my IP address should be the same. Any way to recover my old Bookmarks?

    When I set up my new computer, my internet connection & modem for DSL is the same, so my IP address should be the same. But I had to reinstall Firefox and I can't find the file for my old Firefox profile. If my IP address is the same, is there any way Firefox can recover my old bookmarks?

    See this support article: <br />
    https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
    Your old Profile is located here in Win XP and W2K: <br />
    ''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name''

  • A few weeks ago I had to reinstall itunes on my PC because the latest itunes update did not install properly.  Ever since doing that something called Mobile Me keeps popping up whenever I open email (outlook) and slowing it down. How do I remove MobileMe

    A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it.  I was able to reinstall itunes and it works fine including syncing with my ipod.  However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program.  This a nusance and really slows down getting to my email.  From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes.  I can't find a way to remove this MobileMe from my PC.  I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it.  Any suggestions on how this can be removed?

    Do you have a backup that you can restore from? Your old hard drive seems to be the problem.

  • I have v10.8.2 os on my mac. i use an external drive for backup which is on whenever the mac is on. whenever the mac wakes up i get the reminder that the drive was not properly ejected. i did not have this issue with snow leopard?

    since i have upgraded to mountain lion i get a popup whenever my system wakes up telling me that my external drive was not ejected properly. i did not have this issue with snowleopard. i leave my hard drive on and connected for use with time machine.

    Message was edited by: leroydouglas
    better yet, try this solution:
    https://discussions.apple.com/message/12351186#12351186

  • I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

    I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

    If it's the same machine (same CPU) there should not be any need to activate.  The actiovation is tied to your CPU.
    If you run into problems, then:
    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option. 1 (800) 833-6687
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

  • I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well.  All my songs are in the music folder but not in the itunes folder??  itunes did not prompt me to move file to trash nor is there an option??

    I am trying to delete songs from itune 11 library and i want it to delete the song from my hard drive as well.  All my songs are in the music folder but not in the itunes folder.  itunes did not prompt me to move file to trash nor is there an option to remove file to trash bin.  How can i  delete songs from both the itunes and hard drive at the same time?

    aespinoza2210 wrote:
    could it be in the itunes folder or does it have to be in the itunes media folder, which is within the itunes folder??
    A Espinoza,
    The iTunes Media folder is set in Preferences > Advanced, and is the key to most iTunes folder organizational activities.  So I doubt that the automatic deletion will work for files that are somewhere else within the folder structure.
    However, I have not experimented with that issue in quite a while, so you are welcome to give it a try in iTunes 11. 

  • I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup. How can I get the music that resides on my ipod nano (4th generation back onto the new hard drive on my pc.

    I lost my iTunes library on my pc when the hard drive crashed. None of the data on the drive was recoverable and I did not have a backup either locally or on the cloud. Much of the music is from old vinyl and podcasts which are no longer available.
    How can I get the music that resides on my ipod nano (4th generation) back onto the new hard drive on my pc.
    I have been reluctant to install iTunes on the new hard drive out of fear that I will lose all the contents on the ipod if I try to synch to the new hard drive.
    Help!

    No backup is a huge mistake.
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store ... - Apple - Support

Maybe you are looking for

  • How to focus two text boxes at a time?

    Hi, I am developing a packet analyzer software. In that, I need to focus two text boxes as I select a treeview item. I am using a following code: delegate void voiDelegate(); private void click(object sender, RoutedPropertyChangedEventArgs<object> e)

  • File type in Session Method

    Hi All, This is in the session method in the upload function.... I am getting error"""""Unable to interpret "FILE NAME".  Possible causes of error: incorrect spelling or comma error.""""" and the code is as follows.. TO UPLOAD FLAT FILE TO INTERNAL T

  • Structure of ABAP program

    hi SDNs,            what is the typical structure of an ABAP program?            thanks and regards,                aravind.

  • Time out error in olizbw

    Hi experts, While filling setup tables in olizbw a runtime error as follows is occured: Runtime Errors         TIME_OUT Date and Time          05.06.2008 10:44:21 Short text     Time limit exceeded. What should i do to not to come this error. Full po

  • E66 - set calendar alarm date and time

    Hi, in previous phone - E60, a was able to set both date&time for calendar alarm. In E66 I can only set value from limited list - 0-30 min, 1-8, 12 hours, 1-2 days, one week. But for older events, which I've moved from e60, two fields are displayed w