My G-drive slim is full and is deleting oldest files. How can I choose which files to delete?

My g-drive slim is full and deleting old files. How can I select files to delete?
What about deleting from "new" on the desk-top, which I assume is the hard drive.

Similar Messages

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

Cpu has 4 usb's on the rear. 2 are 2.0 and 2 are 3.0. how can you tell which one is which

Just bought new HP PAV p7 1380t. It has four USB's in the rear. According to specs
2 are 2.0 and 2 are 3.0 How do you tell which one is which?
This question was solved.
View Solution.

Here are the specs and configurable options for your HP Pavilion p7-1380t Desktop Computer. Here are the specs for it's H-Joshua-H61-uATX (Joshua) motherboard. According to the motherboard specs, this system has 4 USB 2.0 ports on the back as shown below;
(#1) USB 2.0 x 4
Typically, USB 3.0 port are blue and have a stylized "SS" symbol near by. There does appear to be a USB 3.0 header on the motherboard, which could be used for front or rear ports.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How can you tell which files have backed up to external hard drive using Time Machine?

Hello Mac Users,
I have Macbook Pro (early 2011) and recently purchased a WD My Passport for Mac external HD. I have completed a back up using Time Machine, however how do I tell what files actually were backed up? I have a ton of audio, documents and photos that I would like on there. Its a 2 TB HD, my memory is 750 GB... Im using 632. At end of back up, the drive still had 1.88 TB left. Any help would be appreciated! Thanks
Linz19

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
tmutil compare | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take several minutes to run. Wait for a new line ending in a dollar sign ($) to appear below what you entered.
A TextEdit window will open with the output of the command. Don't post all the output; just read it yourself. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

Spc.fp and spc.h not found, How can I get these files

Hello
I get a project from my friend, I opened it and built it, then there was an error, spc.h file not found.
Then I double clicked on the file spc.fp , it told me that the spc.fp not found.
I have used everything to search them , but I got nothing
Does someone can help me to get these files?
Thank you!
Clasu.

.fp files are small libraries of functions ("Instruments") normally associated to specific devices (e.g. a scope, a DMM or something similar) or to specific softwares (CVI comes with a set of instruments like the Programmer Toolbox, the Password Control and so on).
spc.fp may relate to Statistical Process Control Toolkit for CVI, a product whose only references on NI site date back to 1998 and is not listed any more among toolkits for CVI.
Can you ask your friend if my hypothesis is correct?
I do not know of any other standard CVI instrument with that acronym: could this .fp be a library of functions your friend wrote by himself?
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Hi, my computers hard drive has gone faulty and I have lost everything, how can I get the music from my iPod touch back onto my new computer?

Thanks to anyone that can help. Have lost everything on my computer and am having to start all over again. Windows by the way. Just want to know how I can get my music etc from my iPod back onto iTunes without losing it all. Have got rid of all the CDs as well! Many thanks, Ian M

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Hopefully you take the time to back up these files regularly in the future.
B-rock

Deleted and resized bootcamp partition. How can I get my files back?!?!?

So I used a Windows partition for months and decided to switch back to Mac.
I backed up most of my files and then deleted the partition with the Mac Boot Camp Assistant. Then resized it back to 500gb.
I soon realized that there are some very important files which I forgot to backup off the windows partition.
I REALLY need these files back, please tell me there is SOME WAY I can recover those files.
PLEASE HELP!

Hi Yale,
Thanks for your post.
What’s the version of your TFS and VS?
How did you “removed the mapping in Source Control Explorer”? Please share the detailed steps here.
If you deleted the source files in Source Control Explorer, but you haven’t check-in on your source folder, you can perform
Undo Pending Change… on your source folder to get that deleted sour files back.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hi I use Osx 10.9.4 and FCPX 10.1.2 How can I choose a CD format which will be playable outside the World of Apple? i.e. in a 10 year old CD player in my old car

I am trying to make a CD for a Children's Hospital where I used imported tunes from iTunes into FCPX, then sharing and burning in .AIFF or .WAV extensions for the CD. When I do this I can play the CD on any Apple machine but not in a non Apple Device such as in a CD player in the Hospital, or my car. I would like to be able to play the CD outside the Apple domain. Any Ideas? Your suggestions would be most helpful. Thank you
DBC
PS
I use an iMac OXS 10.9.4 and FCPX 10.1.2

YYou should do this in iTunes not in FCP.

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac.

My Hard disk drive (C) is full and can't save to my local disk drive (D)...HELP!!!

I cannot save anything else to my computer and I feel as if I barely have anything saved on here to begin with. My (C) drive is almost full and my local disk drive (D) has so much space on it, but I do not know how to make that my default drive. I've tried following people's suggestions online but nothing is helping. Can anyone help?

I have a Dell Inspiron with Intel Core i3 and windows 7. Does this answer what you need? Or do you need a model number?

HT1338 I try to buy songs itunes but there is a message stating that my disk is full and to empty out the trash can. But i don't know what disk it speaks of?

I try to buy songs itunes but there is a message stating that my disk is full and to empty out the trash can. But i don't know what disk it speaks of?

The "disk" is your startup volume, which is usually called "Macintosh HD" (unless you changed it). Your iTunes media files (such as song files), and basically everything else, are stored on that volume (unless you changed it).
You should create some free space as soon as possible, because the system (OS) and applications use free space to write temporary files as part of normal operations. If there is very little free space available, your system may start to bog down and feel slow because it's not running efficiently.
You can empty whatever is currently in the Trash by doing a click-hold (or right-click) on the "waste basket" icon in the Dock, and selecting Empty Trash. A good place to look for files you may no longer need is your Downloads folder. There is usually a link to your Downloads folder in the sidebar of a Finder window. (The folder itself is located in your user home folder.)
You can see how much free space you currently have by selecting Macintosh HD on your Desktop (or in the sidebar of a Finder window), and selecting Get Info from the File menu. You can also right-click on it and select Get Info from the menu that comes up (or hit Cmd-I on keyboard). The Info window shows Capacity and Available for the volume. Available is the free space. It would be best to keep Available at least 10% of Capacity; getting it to 20% or more would be better.
If you can't free up enough free space by deleting things you do not need anymore, you should get an external hard drive and save some your files there. That's actually how I run my iMac; most of my user files are stored on external USB and FireWire drives.

Ikeep getting a message that my start up disc is full and i don't know how to free up space.. also when i o to download some files i am told there is no space left to download i bought this macbook pro used an receiver no discs.. what can i do?? t

ikeep getting a message that my start up disc is full and i don't know how to free up space.. also when i o to download some files i am told there is no space left to download i bought this macbook pro used an receiver no discs.. what can i do??

You need to purchase an external drive and start moving some files to it or you can try trashing some files that you no longer need.
Download OmniDiskSweeper and see where your larger files are... you can move them to an external drive or trash them: it's up to you.
I would also begin, since it's obviously don't have backups, a backup scheme or two. See Most commonly used backup methods.
Good luck,
Clinton

When I connect my iPhone (5s) to my computer it says that it's storage is full and that I have over 4,000 pictures even though I have deleted all of them. It won't allow me to add music or anything else either because it says my phone is full.

When I connect my iPhone (5s) to my computer it says that it's storage is full and that I have over 4,000 pictures even though I have deleted all of them. It won't allow me to add music or anything else either because it says my phone is full. I have restarted my phone and the computer multiple times, but it still tells me that my phone is full.

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

I have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

Greetings,
What happens when you drag it?
Make sure the drive you are moving the files to has enough available space to receive the file:
Click on the movie file and go to File > Get Info and note the "size"
Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
Also note the format of the drive you are copying too. If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
Hope that helps.

HT4527 While upgrading my operating system to Windows 7, I backed up everything on external drive. However the drive is corrupt and lost my music. Since I have an iPhone I had the music there as well, I synced it and it erased everything. How can I get

While upgrading to Windows 7, I backed up everything on a external drive; it became corrupt so I could not access my music library for iTunes. However, I had my music on my iPhone as well so I assumed it will sync. It did sync but not the way I thought, so I lost years of music and favorite uploaded CDs. How can I recover it? I lknow you can acess iTunes from 4 computers so the database is there somewhere. Unfortunately all I was able to recover is the music purchased from iTunes directly. It makes me wonder about the iCloud product; if I cannot find my music what is my incentive to buy iCloud? It seems like they are starting to charge for something that they provided before freely, then messed up the updates and software so that we need to pay for this service now.

iCloud never stored music. That is what the iTunes Match service is for.
The only way to get back non-iTunes-purchased music is to import them to your new iTunes library however you did it on your old computer.

My G-drive slim is full and is deleting oldest files. How can I choose which files to delete?

Similar Messages

Maybe you are looking for