My g key types as alt+g and gives
my g key types as alt+g and gives ©
this started last ni©ht and as you can see if very frustratin©
it only applies to the © jee key so the alt keyisnt stuck
please help
re©ards
mike
Macbook Air
Mavericks OSX 10.9.1
Hi Drmike33,
If you are having unusual output from your "G" key, you may want to take a look at the "Some keys don't work as expected" section of the following article:
Apple Support: One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Regards,
- Brenden
Similar Messages
-
Why does my Right arrow key type the number "8" and the Up arrow key type the number "9"
Whenever I hit the right or up arrow key on my macbook, it does shift either right or up but it also type either the number "8" for the right arrow key or the number "9" for the up key. How do I get this to stop? It's very annoying
Hi benmurray37,
Welcome to the Apple Support Communities!
For this situation I would suggest a few different steps to isolate and resolve the issue. Please follow the steps listed in the Some keys don’t work as expected section of the following article.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
I hope this helps,
-Joe -
The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?
Hi Luis Fernando Garcia,
Thanks for using Apple Support Communities. This article has troubleshooting for keys not working on your keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sureMouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, seeUnable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Cheers,
- Ari -
when I try and open a tab that is the same as the page I'm currently on it closes it self. Not when I type the full address, but when I use the arrow keys to select the url and press enter. I just don't like typing in the same address 5 times, when the older Firefox worked.
Hi
AutoPunch enabled? Command click in the bottom half of the Bar Ruler to turn it off
CCT -
Revolve 810 and behavior of the arrow keys with Ctrl + Alt
The behavior the left and right arrow key, in combination with Ctrl and Alt, is to modify the screen orientation. (Which can be help because the Revolve is easily confused.) However, I want to disable this behavior because I use those key combinations for other uses.
How can I disable this behavior?I understand you want to disable the rotate shortcut keys.
It looks like it is using Intel, so I will provide the steps my Windows 7 system uses to disable these functions. They should be similar to Windows 8 as well.
Right-click the desktop and select screen resolution.
Select advanced settings.
Select Intel Graphics Media Accelerator Driver for Mobile (wording may be different).
Click the Graphics Properties button.
Select Options and Support of the graphics control panel.
Disable Hot Key functionality and click apply then ok.
This should disable the hotkeys to rotate the screen.
Since the Revolve 810 is using an Intel graphics card similar to mine, the steps should be the same or similar.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l produce cursor nudges.
It's a new machine - and the Thunderbolt Display is meant to work with it. You need to just make an appointment at your local Apple Store and have them fix whatever is wrong.
If you like, you could always try a SMC reset and a PRAM/NVRAM reset to see if either of those will get your keyboard back in working order...
Clinton -
let me first say that this links dos not apply to my problem the first one is :
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/46b24b68-debf-466e-a780-66a3b999724c
and it dos not apply because I dont use remote app, and also i able to change settings
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/6a0f0eda-d3f6-4cd9-91ef-a7e0b20bc799/
this one has similar problem but he working with remote app and do not have the Upper Case and Caps Lock is off
http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/f978e234-2b3c-4780-9dda-bec52b25330d
this one using XP i have it on windows 7 connecting to remote server 2008 r2
here is the issue
my users remote control a terminal services farm, now when they changing language to English some time it change to English Upper Case and caps lock is off ! then the Alt + Shift and the go back to English lower case and if they just play with
this (i mean they just use Alt Shift over and over to try to get back to normal state when you hold shift and alt and you change to English and back to Hebrew if you hold the alt shift one more time )
i tonic some thing strange ifi hold down first the alt and then the shift this issue happen more often
i upload a video on this showing the problem live on my dropbox :
https://dl.dropboxusercontent.com/u/103434771/meditowers/IMG_0245.MOV
here is how the normal setting should be
Alt + shift need to change to lower case English
then Alt shift one more time will go back to Hebrew
now if you hit on the caps lock you will be in English all the time with Upper CaseHi Yitzhak,
Please refer to this post:
www.davidbond.net/2012/10/rdp-shift-key-gets-stuck.html
This post includes fix to this issue at the comments.
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected] -
I have a new keyboard and two of the keys are inverted when I use my Mac -- but not when they put that keyboard on the Mac at the Apple Store. The @ is where the < should be and visa-versa. That is, when I type the @ I get < and when I type the < I get @. I am in Français numérique. Thanks
Try a SMC reset, please do it 2-3 times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
How can I disable ctrl+alt+del and other keys
I need help on how to disable some keyboard key combinations (ctrl+alt+del)in particular. Disabling other keyboard keys is equally welcomed.
Also how can I disable Windows 2000/XP's Task Manager from exposing my running program to be terminated.
ThanksI need help on how to disable some keyboard key
combinations (ctrl+alt+del)in particular. Disabling
other keyboard keys is equally welcomed.This is not a java question per se. I would recommend searching on MSDN or some such site to figure this out.
Also how can I disable Windows 2000/XP's Task Manager
from exposing my running program to be terminated.This can be done by limiting the permissions of the Windows user that you would like to prevent from doing this. The user manager lets you do this.
>
ThanksNo problem. -
The boxes where I would type in search terms and URL are GONE! So is the BACK BUTTON. HELP!
I downloaded software to convert jpg files to pdf's, and it worked. however, I think it installed Incredimail, and I suspect that it installed Ask.com - neither of which I wanted. It was just after that that my back arrow and my boxes where i type in search terms and urls DISAPPEARED! Firefox is compatible with some important websites and has features that i need. NEED.
Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
* Press F11 to toggle full screen mode (Firefox/File > Full Screen)
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing -
When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?Thank you for your help.
I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
Hope this helps others that it just might be your hard drive failing. -
GeoMedia - Primary key types are not matching
I'm working on converting Access Spatial layers into Oracle Spatial layers using the Locator in Oracle 9i.
I have the Access PK as Long Interger
and the Oracle PK as Number (10,0).
I can't get around this error : Primary key types are not matchingHi,
please refer to
http://www.oracle.com/technology/pub/notes/technote_access_migration.html
You may try the OWM (Oracle Migration Workbench), if your data are more complex than one or two tables.
regards, Andreas
long integer(access) Number(11,0)(default) Number(11,0) (recommended)
----- -
Java.security.InvalidKeyException: Unsupported key type: SunPKCS11-MyPKCS11
I am having a very strange issue with my CAC card. I wrote a small Java program to login into ProjectForge.mil webservice
ICollabNetSoap m_sfSoap = (ICollabNetSoap)
ClientSoapStubFactory.getSoapStub(ICollabNetSoap.class, "https://project.forge.mil/");
String sessionId = m_sfSoap.login("", "");
After entering CAC PIN, it is throwing exception saying that "javax.net.ssl.SSLHandshakeException: Received fatal alert: unsupported_certificate".
More specific exception is:
Caused by: java.security.InvalidKeyException: Unsupported key type: SunPKCS11-MyPKCS11 RSA private key, 2048 bits (id 39632224, token object, sensitive, unextractable)
Note: I have asked three of my co-workers to run the same program using their CAC's and seems to be working fine.
Only the difference between their CACs and mine is CA(Certificate Authority Value. Their's is 24 and where as mine is 25). It looks like JVM was not able to understand the private key of my CAC.
On the other note, my CAC cworks fine with web service client application that was written in .Net.
I am using Jdk-1.6.0_26 and I have already downloaded and installed latest jce .jar files.
Any help is greatly appreciated
Here are the exception details:
=======================================
[java] Tue Aug 02 17:07:54 MST 2011 URL assignment worked
[java] Tue Aug 02 17:07:54 MST 2011 Trying login...
[java] Exception in thread "main" AxisFault
[java] faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
[java] faultSubcode:
[java] faultString: javax.net.ssl.SSLHandshakeException: Received fatal alert: unsupported_certificate
[java] faultActor:
[java] faultNode:
[java] faultDetail:
[java] {http://xml.apache.org/axis/}stackTrace:javax.net.ssl.SSLHandshakeException: Received fatal alert: unsupported_certificate
[java] at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
[java] at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:136)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(SSLSocketImpl.java:1720)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:954)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1149)
[java] at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:186)
[java] at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
[java] at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
[java] at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
[java] at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
[java] at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
[java] at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
[java] at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
[java] at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
[java] at org.apache.axis.client.Call.invoke(Call.java:2767)
[java] at org.apache.axis.client.Call.invoke(Call.java:2443)
[java] at org.apache.axis.client.Call.invoke(Call.java:2366)
[java] at org.apache.axis.client.Call.invoke(Call.java:1812)
[java] at com.collabnet.ce.soap50.webservices.cemain.CollabNetSoapStub.login(CollabNetSoapStub.java:115)
[java] at com.collab.examples.LoginTF.main(LoginTF.java:30)
[java] {http://xml.apache.org/axis/}hostname:GDYL8420N5B
[java] javax.net.ssl.SSLHandshakeException: Received fatal alert: unsupported_certificate
[java] at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
[java] at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:154)
[java] at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
[java] at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
[java] at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
[java] at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
[java] at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
[java] at org.apache.axis.client.Call.invoke(Call.java:2767)
[java] at org.apache.axis.client.Call.invoke(Call.java:2443)
[java] at org.apache.axis.client.Call.invoke(Call.java:2366)
[java] at org.apache.axis.client.Call.invoke(Call.java:1812)
[java] at com.collabnet.ce.soap50.webservices.cemain.CollabNetSoapStub.login(CollabNetSoapStub.java:115)
[java] at com.collab.examples.LoginTF.main(LoginTF.java:30)
[java] Caused by: javax.net.ssl.SSLHandshakeException: Received fatal alert: unsupported_certificate
[java] at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
[java] at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:136)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(SSLSocketImpl.java:1720)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:954)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
[java] at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1149)
[java] at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:186)
[java] at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
[java] at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
[java] at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
[java] ... 11 more
[java] Java Result: 1
==================================================================
I have captured more specific exception which says
Caused by: java.security.InvalidKeyException: Unsupported key type: SunPKCS11-MyPKCS11 RSA private key, 2048 bits (id 39632224, token object, sensitive, unextractable)Thanks, I have installed OpenSSL.
Here is the PEM copy of my certificate
==================================================
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
======================================================= -
Hi my keyboard seems to be in the alt mode and i can't get it out!
Hi after cleaning my keyboard , my keyboard seems to be in the alt mode and i can't get it out so when i type using the keyboard on the computer symbols like this ˝Î˝Ó˝ıÎÏÏÓ‰ˇÔÔ¨ÁÔ come up.
Try this:
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-iPad-Is-Zoomed-In _2.htm -
Problem using different Map key types in one class
I'm running Kodo 2.3.3. It seems I can only have one Map key types for all
maps in a class. For example, if I have two maps in a class, their keys
must be of the same type.
Is there a plan to remove this limitation soon?
Thanks,Abe White wrote:
Kodo should generate a separate table for each Map. We have internal tests
that use classes with Map fields using a lot of different key/value type
combinations, so there shouldn\'t be a problem.It looks like two maps (keyValues and versions) are sharing the same
table. Here is the table generated by schematool (db: Oracle 8.1.7):
desc persistentmotiveresourcebean_x;
Name Null? Type
ID_JDOIDX VARCHAR2(255)
JDOKEYX NUMBER
KEYVALUESX VARCHAR2(255)
VERSIONSX VARCHAR2(255)
==========================================================================
Following is the simplified code I run:
-----------internal.jdo--------------------------------------
<?xml version=\"1.0\"?>
<jdo>
<package
name=\"com.motive.services.resourceManagementService.internal\">
<class name=\"PersistentMotiveResourceBean\"
identity-type=\"application\"
objectid-class=\"com.motive.model.PrimaryKey\">
<field name=\"id\" primary-key=\"true\"/>
<field name=\"versions\">
<map key-type=\"java.lang.Float\"
embedded-key=\"true\" value-type=\"java.lang.String\"
embedded-value=\"true\"/>
</field>
<field name=\"keyValues\">
<map key-type=\"java.lang.String\"
embedded-key=\"true\" value-type=\"java.lang.String\"
embedded-value=\"true\"/>
</field>
</class>
</package>
</jdo>
Java source:
-----------PersistentMotiveResourceBean.java---------
package com.motive.services.resourceManagementService.internal;
import java.util.HashMap;
public class PersistentMotiveResourceBean
private String id;
private String name;
private HashMap versions;
private HashMap keyValues;
public PersistentMotiveResourceBean()
public String getId() { return id; }
public void setId(String id) { this.id = id; }
public String getName() { return name; }
public void setName(String name) { this.name = name; }
public HashMap getVersions() { return versions; }
public void setVersions(HashMap versions) { this.versions = versions; }
public HashMap getKeyValues() { return keyValues; }
public void setKeyValues(HashMap keyValues) { this.keyValues =
keyValues; }
----------------PrimaryKey.java-------------------------------------
package com.motive.model;
import java.io.Serializable;
public class PrimaryKey implements Serializable
public String id;
public PrimaryKey ()
public PrimaryKey (String id)
this.id = id;
public boolean equals (Object ob)
if (this == ob) return true;
if (!(ob instanceof PrimaryKey)) return false;
PrimaryKey o = (PrimaryKey) ob;
return (this.id == o.id);
public int hashCode ()
return id.hashCode();
public String toString ()
return id;
Maybe you are looking for
-
Plz Help!!! Urgent Mobile Database and database synchronization
Have any one heard of Funambol? I would like to create a mobile database to be sync with server everyday to update daily task... Is Funambol is the solution for this? Or is there any solution??
-
Adding new set of attrs with old attrs values
Our DS architecture has changed and we need to change a node in our DS which holds information about our applications.So, we need to add new attributes for all the entries in this node and have these new attributes reflect the value of the old attrib
-
Please tell me-send to me a link-on my email: jumboemail at yahoo dot com where can I download Windows XP from msdn???- I understand that it can be downloaded from msdn as an image and a serial, but where? thanks
-
What is the best technique to resize a clip and overlay it on a difficult shape, like a broken piece or mirror?
-
How to automate FIM CM configuration steps using PowerShell?
Hi, We are trying to automate the steps that the FIM CM Configuration wizard is doing using PowerShell. Any pointers on how to do it? Has anyone done it before? Thank you.