My g4 will not recognize my USB SD flash card
I am trying to use my USB SD flash card to open some pictures and I get a message that my with 10.4.11 G4 will not recognize the card. I used it yesterday.
What USB SuperDrive...?
For the Apple USB SuperDrive, see > Troubleshooting the slot-loading SuperDrive or take it to your local AASP and have it checked out.
Similar Messages
-
Removed usb without ejecting first, now that port will not recognize a usb card. how do i reset?
I had a usb memory stick that I removed without ejecting it first. Now that port will not recognize a usb memory stick. How can I reset this port?
How do i reset my Iphone 4 password without restoring to default?
If you don't remember it, you can't. -
My mac will not recognize my kodak 8gb memory card what do i do
my mac will not recognize my kodak 8gb memory card what do i do?
Follow up to Linc's post above: Are you using the SD card reader in the Mac or an external card reader?
Stedman -
Cisco 1760 router will not recognize wic1-dsu-t1-v2 card in slots 3 or 4
My 1760 router will not recognize a wic1-dsu-t1-v2 card in slots 3 or 4. They only work in slots 1 & 2. Never saw this before where the same card would not work in different slots.
Need assistance.
Thanks,
Ron
Router#show version
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-IPBASE-M), Version 12.3(6c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 20-Jul-04 07:00 by kellythw
Image text-base: 0x80008120, data-base: 0x80C74650
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
Router uptime is 20 minutes
System returned to ROM by power-on
System image file is "flash:c1700-ipbase-mz.123-6c.bin"
cisco 1760 (MPC860P) processor (revision 0x500) with 55598K/9938K bytes of memory.
Processor board ID FOC0849230K (3846615071), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router#show flash
System flash directory:
File Length Name/status
1 7517112 c1700-ipbase-mz.123-6c.bin
[7517176 bytes used, 25775112 available, 33292288 total]
32768K bytes of processor board System flash (Read/Write)
Router#show diag
Slot 0:
C1760 1FE VE 4SLOT DV Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 5.0
PCB Serial Number : FOC0849230K
Part Number : 73-7167-05
Board Revision : B0
Fab Version : 04
Product (FRU) Number : CISCO1760
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 16 41 05 00 C1 8B 46 4F 43 30 38 34
0x10: 39 32 33 30 4B 82 49 1B FF 05 42 42 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC/VIC Slot 0:
FT1 4351
Daughter card-Version 4 TLV Cookie Format
Hardware Revision : 1.1
PCB Serial Number : FOC09053XP1
Part Number : 73-8346-04
Board Revision : A0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0-0
Product (FRU) Number : WIC-1DSU-T1-V2
Top Assy. Part Number : 800-22193-02
CLEI Code : IP4I380GAB
WIC/VIC Slot 1:
FT1 4351
Daughter card-Version 4 TLV Cookie Format
Hardware Revision : 1.2
PCB Serial Number : FOC10073JND
Part Number : 73-8346-05
Board Revision : A0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0-0
Product (FRU) Number : WIC-1DSU-T1-V2
Top Assy. Part Number : 800-22193-03
CLEI Code : IPUIAPRRAAHi Ron,
Slots 3 & 4 are for VICs only.
Have a look at the Location/ Function table here:
http://www.cisco.com/en/US/products/hw/routers/ps221/products_tech_note09186a00800c3399.shtml
cheers,
Seb. -
SignalExpress will not recognize NI USB -9211A but will recognize NI eDAQ-9172
Hello,
I am trying to get some temperature readings from a NI USB-9161 USB carrier with a NI cRIO-9211 installed. When I plug in my device signal express does not recognize it. I also have a NI eDAQ-9172 which I was able to configure in Labview Signal Express 2009. I don't know if I have a driver problem or something is wrong with the NI USB-9161 carrier. I do have one thermocouple plugged in presnently.
Thank You!Looks like you could be having some compatibility issues - see the article below.
http://digital.ni.com/public.nsf/allkb/EC5F24EEAC6003A386257051004BFE4A?OpenDocument
Jake H | Applications Engineer | National Instruments -
I have tried 3 official apple ones and 2 different plugs. Ive tried plugging it into my laptop but will not find the phone. it has had problems since i updated my ios. Battery has been replaced. Any suggestions would be fantastic
test if it charges with an ac charger
test if it's detected by another computer
if it's no to both then likely the connector is broken
if it's yes to both thne it's likely your computers itunes install which is the problem -
I really need help, i had just finished activating my iphone, and now im loosing money because i cannot use it.
What was the error number? That would be very useful since the following gives actions for various errors.
http://support.apple.com/kb/TS3694
Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes. See:
http://support.apple.com/kb/HT1808 -
Lion Will Not Recognize Permissions Buttons in Flash Webcam
I have tried this on both Safari and Chrome and get the same problem. If I am on a web site which allows one to transmit video via Flash I enable the camera and get as far as having the dialog box pop up to specify video is connecting. That box warns you that the program wants to access your camera and microphone and has a Deny and an Allow button. When I mouse over the buttons, pressing on them has no effect at all. There is no way to authorize the cam (or even to deny it) all one can do is close the dialog and forget about the cam. Has this happened to anyone else? Is there a workaround?
I found a solution...
First of all I discovered installing lion did NOT install the 10.3 beta of Flash Player for Lion -- so I had to install that manually.
The permissions button still didn't work when i tried to used my webcam on JustinTV but I found a work around.
Right click on the options button on the bottom of the flash permissions window adn choose global settings.
From there you can choose to allow specfici websites to use your camera microphone. I gave www.justintv permission and it no longer comes up with the permission window and the cam/mic work immediately.
If security is a concern for you can simply go back to the system panel and change to toggle back to "always ask" again after you broadcast.
Anyway it's workable solution until Adobe updates their player. -
Win7 will not recognize my ATI 5870 video card on Bootcamp
HI,
I have a MAC pro 1.1 and I have an ATI 5870 video card. On OS 10.9.3 the mac sees the video card just fine, but when I use Bootcamp and run Win7 I can’t get the card to work properly. I tried to go to ATI and download the drivers but I keep "no such card found on your device" error from ATI or I can’t fine the correct drivers. When I run Dxdiag the video area shows me no video card information aside from this card is working properly. Can anyone assist me please?
Thank s in advance.A Mac Pro 1,1 technically can't run Mac OS X 10.9 without a hack. Thus it is unlikely the Boot Camp drivers Apple included for it would recognize anything on it newer than is supported. You could try using another Virtualization engine that speaks to all graphics chips with their own drivers:
https://discussions.apple.com/docs/DOC-2741 -
Win7 will not recognize my ATI 5870 video card in Bootcamp
HI,
I have a MAC pro 1.1 and I have an ATI 5870 video card. On OS 10.9.3 the mac sees the video card just fine, but when I use Bootcamp and run Win7 I can’t get the card to work properly. I tried to go to ATI and download the drivers but I keep "no such card found on your device" error from ATI or I can’t fine the correct drivers. When I run Dxdiag the video area shows me no video card information aside from this card is working properly. Can anyone assist me please?
Thank s in advance.have you tried to download the correct bootcamp driver zip for your mac and manually install the latests Radeon amd driver from that?
Apple - Support - Downloads -
I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
How do I sync my iPhone 5 to my new PC? iTunes will not recognize it even when plugged in the USB port. Settings>General>iTunes wifi sync is still my old laptop. Any help is appreciated.
See also Recover your iTunes library from your iPod or iOS device.
tt2 -
My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I have a MacBook Pro 15" laptop with Retina running OSX 10.8.5. It will not recognize that my android device (Samsung Galaxy Note3). I am using the standard USB that came out of the box to connect my device to my MAC. Deleted Kies 4 MAC. Help Pls!
Dee002 wrote:
MacBook's only have 2.0 USB ports.
Wrong.
If you're not going to provide correct advice then don't repsond at all.
http://www.apple.com/macbook-pro/specs-retina/ -
Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard? Do I have to buy an Apple Keyboard to get it to work right out of the box?
Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to?
Maybe you are looking for
-
Windows Image Boot is a new Windows 8.1 update installation method for UEFI Windows Tablet PC and UEFI/SSD based PC. The entire operating system is one 2.5 GB compressed large image file and the system is booting from there. I just inform you, WimBoo
-
Adobe will not launch or open PDF's
Suddenly, Adobe will not launch or open PDF's from my computer or from the web. I have tried to uninstall and re-install without any luck. I use WIN 7 and IE8. Help!
-
Oracle BI Publisher 11g - APEX compatiblity matrix
Hi I'm looking for information regarding Oracle BI Publisher 11g's compatibility with APEX versions. Can the Oracle BI Publisher 11g product fully integrate with APEX 3.x or will it need a minimum APEX 4.x to work seamlessly? Thanks Kind Regards Greg
-
How do I chat with Iphone users?
Can I use I chat to chat with my friends that have Iphones using Ichat or do I need to download Facetime which is what most Iphone users use?
-
I lost my sound to my games unless I use my headphones. How do I get my sound back?
Can you help me get my sound back?