My G5 died... new logic board needed... What do i do?
Ok, here's the story:
The other day, my G5 crashed when i wasn't using it (screensaver).
I hard rebooted it, fan started to spin, power light flashed only when i pressed the button and then no screen. After a while, fans started at full speed...
Tried loads of things (reseat memory, PCI cards etc...), nothing worked.
I took it to the local Apple Certified Service centre. They called me after half a day to tell me that the Logic board had a problem and needed replacing and quoted £585 inc vat!
No need to say that i am pretty upset as i paid 1400 3 years ago for that machine!
Now, what are my best options?
This is a dual 1.8 G5 (early 05) with 3Go ram and 2 SATA drives. I have 2 standard Pci Cards for music in it (RME audio card and UAD-1).
Should I get it repaired?
Should i buy a second hand G5 (which would cost the same sort of price but with the risk of having a problem as well)
Should I go for a new or newer Mac pro but can i reuse my memory, PCI cards, disks etc???
Thanks a lot for advice.
Laurent
Hi tek_uk,
Welcome to the forums.
Your mac is one found in either of these model series. Anything you have now on your mac would work for both series and if you chose to go with one of the faster models listed you could easily do that.
http://support.apple.com/kb/SP80
http://support.apple.com/kb/SP67
Replace logic board... There must be a special course at Apple training schools in saying that.
Similar Messages
-
Ethernet port dead- new logic board needed?
The ethernet port on my 2010 iMac 21.5" died after a storm last week, so I brought it to the Apple store to have it checked out. They said it needs a new logic board since the port is connected to it, which will cost around $700. I can't see spending that much money to fix it, anyone have an ideas on where I could sell it for parts? The guy I spoke to at the store said to give it a shot
Is your wireless still working? You could connect your Mac over Wi-Fi instead, if you still wanted to use the Mac, that is. Or use a USB Ethernet adapter. Apple sells one for $50 that was primarily for the Macbook Air, but will work with any recent mac. But if you already have Wi-Fi, then I'd try that. And if you don't have Wi-Fi, it still may be useful to try Wi-Fi first because even if the Mac's Wi-Fi doesn't work, you can still attach other computers or devices like iPads or iPhones, etc. Whereas it would be a waste to buy the USB ethernet adapter only to find out that the USB ports on your Mac were also affected by the storm.
Otherwise, as usual, you can always sell on eBay & Craigslist. -
I can't find the serial number for my mac after getting a new logic board on recall for my macbook pro.
You can open System Profiler and see if it contains your serial number.
Or have the computer near a previous connected Wifi or on a Ethernet cable to your router.
Reboot holding the D key down for like what would appear to be 10 minutes until Hardware Test appears on the screen.
You can run a test if you wish.
There is a pane at the top if selected will give you your new serial number.
You also can use Terminal
You can quickly retrieve any Macs serial number via the command line by using the following command string:
system_profiler |grep "r (system)"
The command results will look something like this:
$ system_profiler |grep "r (system)"
Serial Number (system): C24E1322XXXX
If that fails you can give them your MAC address which is unique to each machine and there are records at Apple with it.
Open Utilities > Terminal. Copy, paste and press enter:
For your computers Ethernet (wired) MAC address: ifconfig en0 | grep ether
For your computers Airport (wireless) MAC address: ifconfig en1 | grep ether -
Hi
I recently acquired a broken 12" ibook G4 1.33GHz which I intend to repair and use as a second home computer. When the machine is booted I get a chime and black screen. That is as far as it gets - it will not even power down properly.
Very occasionally and seemingly randomly it will boot without "cmdopt+OF" to an Open Firmware prompt with an "Illegal Instruction at xxxxxxx" error message. When I continue to try to boot with the "mac-boot" command I eventually get the "No hard drive" screen (with the flashing folder icon). I have already swapped out the broken hard drive that was in there with one I know to work and contain a bootable OSX.
I have tried resetting the PRAM and NVRAM, although I'm not sure it's actually taking effect as I don't get the second chime on the PRAM reset; for what is probably a similar reason none of the boot options seem to work and I can't boot into Open Firmware using cmdopt+OF.
I'm not sure what's left to try. I don't mind getting a new logic board if that's the problem but I would like rule out all other options first. Does anyone have any suggestions?
Thanks in advanceTry booting from the install disk then run Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
cornelius -
Keys 5-9 no longer work after water damage. Do I need a new logic board?
I had the smallest amount of water on my fingers when I typed something on my keyboard and now keys 5-9 no longer work. Will I need a whole new logic board for this? I've been into two Apple stores and both say I need to book an appointment online. I've been online and tried to book in at three different Apole stores within my area and I just get 'there are no slots available' how am I supposed to get this fixed if I can't book a session to see some!?! Sort it out Apply, it's why your products cost so bl**dy much isn't it!?
thanks, but I really don't think its the logic board since I can still plug in head phones and i can hear movies, etc.
also when i don't have my magicJack plugged in to make calls they now give you a magictalk dial pad to make calls and when i plug in the headphones again i can talk through the speakers and be heard and I can hear them too. Is there something I can used to maybe pull out the connection. I think it thinks the headphones are plugged in all the time. -
Hi,
My imac G5 was revving up quite a bit and acted like I was downloading something all the time. I thought it might just need the fans to be cleaned but I took it into the genius bar and was told that they guy "thinks" that I need a new logic board but isn't positive and would I like to look at the new imacs. ( I love looking at the new imacs but it's not in my budget). He said it would cost close to $800.00 to repair my imac. I edit video on it and it's also become the family computer. Any suggestions? Do I put the money into replacing the logic board? Do I put money into expanding the memory on my macbook pro that only has 2 gb of memory?Has it been shutting down unexpectedly?
There was a repair extension program for some of these iMacs which suffered from defective capacitors on the Logic Board and the Power Supply. It's been closed since Dec. 08, but I've heard of people appealing to Apple Customer Service anyway and getting the repairs covered. First you should open the computer and determine if the capacitors on the Logic Board are swelling or leaking at all. If so, you might be able to convince Apple to do the repairs. 1-800-275-2273. If at first you get turned down, ask to speak to a higher level rep.
Tell them how unfair you think it is that those who had the problem before the program closed were covered, and it was just your bad luck that your computer lasted a bit longer. You can also say that had you opened it up earlier, you probably would have seen the bad capacitor issue developing before the program closed. They are numerous little cylinders about 3/4 inch tall. The tops should be perfectly flat. No brownish gunk. Inspect it very carefully.You won't be able to look inside the Power Supply easily, though. If your iMac is not an iSight, it's very easy to open up. Just three screws at the bottom. Have a look here for illustrated instructions for your model. If it is an iSight, probably best not to try; a bit too complicated. Or you might just call the repair service and ask exactly why they thought it needed a new Logic Board. Did they see bad capacitors?
http://www.ifixit.com/blog/?p=1892
These were the covered serial #'s
* iMac G5 Repair Extension Program for
Video and Power Issues - September 2005
Computer model: iMac G5, 17-inch and 20-inch
iMac Serial number range, first 5 digits:
W8435 - W8522 or
QP435 - QP522 or
CK435 - CK522 or
YD435 - YD522
Message was edited by: WZZZ -
I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do? It is impossible to get any phone number for adobe.
Try these solutions: Error "Licensing has stopped working" | Mac OS
-
Hello,
Less than a year after purchasing a brand new, early-2011 Macbook Pro (still covered under Extended Apple Care) and, sadly, only a week or two after finally upgrading to 8GB RAM, I returned to my notebook after taking a shower and watched it suddenly shut itself down. It has not been responsive to the power button since then (although, see below.. I think I can fix it).
Genius Bar took one look at the visible moisture sensor you can see underneath where the RAM sits and declared it water-damaged. While I agree that either a short and/or corrosion is causing my MBP to malfunction, I don't believe it should void my warranty because the problem isn't that I spilled something on it.1
I hope someone can give me some insight into fixing this myself. Apple says "the Logic Board needs replaced" (a common CS response, I've noticed) the water damage voids my Extended Care + that it'll be at least $1200 and several weeks. Here's the situation:
MBP will not turn on just by pressing the power button. However, MBP consistently (every time) powers up when I do an SMC reset.
I have it in verbose mode and it begins booting. But, it will invariably turn off without warning anywhere between 30 seconds and 8-10 minutes after powering up.
MBP will not turn on just by pressing the power button. However, MBP consistently (every time) powers up when I do an SMC reset.
I have it in verbose mode and it begins booting. But, it will invariably turn off without warning anywhere between 30 seconds and 5 minutes of powering up.
Eighty percent of the time, it turns off during the pre-Xorg boot. However, I have also seen it fully boot, I log in, I'm able to peruse logfiles/etc. Safe Mode (holding shift) crashes early. Single-user mode makes no difference. PRAM/NVRAM/etc makes no difference. I can boot to the Recovery Partition but it turns off just the same (disk utility scan takes too long).
I haven't been able to really test the Internet Recovery because the hotel wireless takes too long. I did boot into Hardware Test and it passed the basic and extended tests (although it seemed to just be testing the RAM integrity.
I can boot from the optical drive with a FreeBSD 9 livecd and an Ubuntu 11.04 livecd. Of note is that the laptop shuts off consistently when FreeBSD begins the journaling services for the ZFS filesystem (every time).
Here is where this leads me to believe I'm at (I am not dogmatic here and would appreciate any corrections or insight):
It seems like there may be corrosive damage on the logic board but maybe it's isolated given the various consistencies in what's happening. It seems like whenever SATA is use, I lose power. When SATA isn't really used (the HW Test), the laptop has literally stayed on for days and days.
I want to get in there and clean up any corrosion with 91% isopropyl alcohol (9% distilled, non-conductive water).
I want to use a bootable OSX livecd with an "emergency console" so I can, basically, use boot options to step throught the boot process and see if I can isolate the problem.
Here is what I'm uncertain about and could use guidance:
Does any of this sound remotely reasonable to anyone who has been through this or am I delusional?
Any tips on identifying and cleaning any corrosion?
While I had made a bootable version of Lion via Disk Utility and a rescue disk with some third-party app, they are MIA and I don't have another Mac at the moment. Do I have any other options? Again, an install dvd is not exactly what I want -- more like a rescue dvd. I had read about some Apple Stores giving/copying bootable USB thumb drives like this to customers. But, I noticed that this is now on sale there for $80. I would use this like once and, ideally, could use my MBP to make more. $80 seems a bit much.
I should be able to step through the boot process in a way like what's possible with FreeBSD, no?
Anyone have any other specific troubleshooting tips?
I really, reallly need my MBP back as soon as possible. I'd really appreciate any wisdom and insight! Thank you,
-ryan
To be totally honest, about 3 weeks prior I spilled some milk from cereal on the desk and a little bit got onto the battery. However, the notebook worked fine for the following weeks. I believe that the problems have been caused by ambient humidity ... I've been staying in a hotel that steams up the entire room when I take a shower. The windows are covered in water droplets so why wouldnt the MBP be affected? As noted, these problems began after I lingered in a hot shower.multiplryan wrote:
To be totally honest, about 3 weeks prior I spilled some milk from cereal on the desk and a little bit got onto the battery.
I don't think you have a case.
You can replace the logic board yourself if you are a DIY'er and save some money. -
My Powerbook G4 died of logic board failure can you help or advise me ?
On Christmas eve I was working on my 2 year old 12" Powerbook G4, I got a notification that the battery was low so I thought lets save my work and drain the battery. It was a good idea at the time because I've heard its sometimes good practice to completely drain the battery and give it a fresh charge ? so the machine finally quit and before going to bed I plugged it into the mains to charge, immediately I noticed the power cord connection to my mac turned green and not the amber I expected. This powerbook has travelled the world with me over the past 2 years so its been a little buddy and I was alarmed to see this happen ? I waited 20 minutes guessing that there would be sufficient charge to wake the machine. After hitting the power button there was nothing !!! no click, chime or indication that he machine was in any way operational.
I tried cleaning the battery and touch points in the machine, I even tried my spare battery in the machine and everything I could to wake the machine. Nothing worked. I was pretty annoyed to be honest, its in perfect condition, no dents scrapes and it was always maintained and well ventilated etc.
On December 27th I flew to Irelands official Mac repair centre here in Galway as I needed it fixed ASAP and I was very concerned about loosing all my work and the physical machine itself. Five days later I called to see if there was a update, the representative explained to me that it was the logic board in my machine and that it was damaged and I would require a new logic board if the machine was to ever successfully boot again. The bill in total would be €670 inc. parts and labour and unfortunately Apple will only guarantee the new logic board for 3 months and after that I'm on my own. Sadly when I bought my machine (in Australia)I didn't take out the extended cover on the machine because it seemed quite expensive at the time and I knew I'd take good care to maintain and upgrade the machine as necessary.
The update I received from the official Apple repair centre was that there was no evidence of any water damage, dust or physical damage and there was no clear explanation as to why the part "just gave up"! The representative was very helpful and removed the hard drive for me, placed it in a external (USB)enclosure and sent it back to me so I did manage to save my work but still Imp very disappointed with Apple that I only got 2 years out of a machine that's become a daily tool to me.
I wanted to post and see what other people have done in this instance, luckily I'm fortunate enough to be able to purchase a new Macbook 2.0ghz to replace my machine but that's now costing me €1519 just because the Apple hardware was well quite frankly crap ! What I would like to know is - does this happen often, is there recourse to go back to Apple and is there a cheaper way to fix my poor Powerbook http://www.flickr.com/photos/bfitzsimons/215516415/ ?
Many thanks in advance for any advice you can give me
Brian H Fitzsimons
Dublin
IrelandHi Brian.
In the UK we have some degree of consumer protection (Sale of Goods Act) for situations not too far from yours. Basically we, as consumers, have a right to expect goods that we purchase to be of a certain standard of quality/reliability. The SOGA provides up to six years of protection, unlike the standard one year warranty many manufacturers offer - which, to some degree, renders extended warranties unecessary.
However each case is different, and consumers will get different mileage depending on their individual circumstances but it is not uncommon for consumers to have successfully obtained repairs, replacements, or refunds using the SOGA - although they will have had to be prepared to argue their case.
Perhaps you might want to check out what kind of consumer protection the Republic of Ireland offers. At the very least, there is probably an EU equivalent of the SOGA which will cover the ROI as well.
NB: I've just re-read your post and realised that you bought the PowerBook in Australia - which probably disqualifies you from any EU or ROI consumer protection. That said, it may still be worth your while to find out what kind of consumer protection is available to you for future reference.
2.0GHz MacBook, 15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4, Mac OS X (10.4.8) Cube, 2xTAMs, iPod 4G & nano 2G, 1G & 2G iPs, AEBS, AX -
Macbook Air, Logic board failure, what happens to data?
Hello,
My Macbook Air died today with 90% battery and will no longer turn on. SMC and PRAM reset did nothing, it's completely unresponsive. I think it's a logic board failure. I have a question regarding a repair with Apple; I realise they will replace the logic board inside my computer with a new (or refurbished) board and the faulty one will be shipped to Apple. Considering the Macbook Air has flash memory on the board will this mean my data is now unrecoverable? I have everything backed up, I'm not worried. I have some err personal photo's of me and my partner in iPhoto and I'm wondering what will happen to the sensitive data.
Thanks for dealing with this lets say awkawrd topicI don't think that your flash memory files are unrecoverable. That's because the logic board of the MacBook Air hasn't got the flash memory soldered. However, I don't know if Apple will replace the logic board, "recycling" your flash memory, or if they will install a whole new logic board replacing the flash memory, although the first option makes more sense and it would be the normal option.
Anyway, as you have a backup on an external drive, you don't have to worry about that -
How many logic boards needed ?!!
Yes. How many logic boards does a Powerbook G4 17" (1Ghz) need to work properly? Do they really have to be changed every year?
I bought this beautiful machine secondhand. About 6 months later the screen seems to fail (stays black) i can us it only in Target mode as hard disk. The consulted Repair centre concludes: new logic board! Then they discover it already had been changed 26/07/2004 ; merely a year ago. But no more garanty. It isn't fair that such a expensive part and repair is only garanteed foor 3 months. Cost of this reparation: more than 700 euros !!!!! Apple customer care: "sorry, we can't do anything to help you" Who can then?
Time to switch I suppose? What else can I do ??Sorry to hear that - not sure if you have any recourse based on the fact that it has already been replaced. If you have an up to date AppleCare contract then I would think it should be covered. In general I would say that your problem is somewhat rare. If main board failures every 6 months were common across the entire product line - or even just a subset such as the 17" - then there woudl have been a class action lawsuit resulting in a settlment that woudl provide extended warranty coverage.
-
My MacBook Pro randomly freezing ever since new logic board?
My mid 2012 MacBook Pro 13" keeps ok randomly freezing ever since I've had a new logic board fitted after my macbook needed a new one (it was fixed through stormfront which is an official apple retailer). It will just freeze, won't be able to move the mouse or anything, and sometimes when I turn it off by holding down the power button, I can most of the time hear a click, but not everytime. Sometimes it freezes when starting up, sometimes it lasts a while before freezing, but recently it's been more like every 5-10 minutes. Can anyone help me as to why this is happening and what the problem may be? I'm running OS X Mavericks. Thankyou.
If You are european then even if youtube out of warrenty then in most countries, its sos that if any element was repaird under warrenty its warrenty is counting from the moment it was repaired. If you are us You have to read warrenty laws.
-
Got new logic board, now software is making me go through authorization?
i just got a new logic board installed on my 2007 MacBook Pro. now any time i open any of my software it makes me go through the authorization process (asking for serial #) - its as though with the new logic board the software actually thinks that its been installed on a whole different computer. just wondering if this is normal or if there is any way to get around it. I do audio production on my mac so I have literally hundreds of different plugins installed many of which have complex product authorization schemes. Thanks in advance for the help.
+*its as though with the new logic board the software actually thinks that its been installed on a whole different computer*+
That's exactly what's happening. Most modern authorization/activation routines look at the hardware giving specific values to various components. When something like the logic board is replaced, the application pretty much sees that as a different machine.
I believe Apple does have the ability to set the serial number in a new logic board... although it has to be done by Apple. This alone may not bypass the need to reactive some of your applications. It depends on the specific activation scheme the application is using. You're probably best off just re-activating your applications. I've never had problems getting software re-activated when dealing with the software vendors due to this situation. Fortunately, OS X itself doesn't require activation. As something of a techy... I've replaced motherboards on desktop systems regularly and even Microsoft has never given me a problem with reactivating Windows.
It might be a pain... but hopefully you'll just have to go through it once. -
Login keychain not storing iChat password since new Logic board
A few weeks ago I had to take my MacBook Pro in for repair (the graphics chip died). At any rate, they fixed the issue by replacing the logic board. Now, however, it seems to have screwed up my login keychain.
Whenever I open iChat now I'm prompted for my AIM password. Even though I ask for it to be stored and remembered by keychain it is not. I have tried repairing the keychain, creating a new one, deleting/re-installing iChat, and even trying a brand new user account all to no avail.
So what gives? Has the new logic board permanently screwed up some settings on my MBP? Is there anything else I can try?
Thanks
Message was edited by: DryvlyneDryvlyne wrote:
I already re-installed iChat by running the Optional Installs.mpkg from the SL disc. Is this why you were suggesting I use Pacifist or can it repair the code signature you speak of?
no. I wasn't sure if optional installs offers ichat as an option. if it does you can use that instead of pacifists. it should work just as well. but make sure you reapply 10.6.2 combo update afterward.
What about me not being able to edit and save changes to my keychain items. Doesn't this imply a problem with Keychain?
do you mean you have problems with other keychain items beside ichat? on all accounts?
BTW, you marked my post solved. you shouldn't do that until and unless your problem is actually resolved. this tells other posters that your issue is fixed and disinvites further responses.
I dunno, the whole situation is strange. I have Google Notifier installed on my MBP and it was able to save its password to Keychain just fine.
Thanks -
Kernel panic.. with new logic board
Hi,
So I recently replaced my logic board after trying EVERYTHING to fix a somewhat frequently occuring kernel panic. Now however.. it has happened again.
Does anyone have any idea what could be causing this? I honestly feel like I've tried everything. Could it be bad RAM? I've changed the hard drive, done a fresh OS X install (perhaps its something in my settings from migrating my old stuff back over?), new logic board.. reset PRAM, every suggestion I could find.
Here is the old discussion before I changed the logic board. https://discussions.apple.com/thread/3902490
Attached the latest crash log.
Interval Since Last Panic Report: 389295 sec
Panics Since Last Report: 2
Anonymous UUID: F57DA50B-3111-4118-A66E-A003634B4A5D
Sat Aug 4 20:34:26 2012
panic(cpu 1 caller 0xffffff80002c473a): Kernel trap at 0xffffff80002aaae2, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000000645e000, CR3: 0x000000002fb3d000, CR4: 0x0000000000000660
RAX: 0xffff80000668f000, RBX: 0xffffff801014ce80, RCX: 0xfffeffffffffffff, RDX: 0xffffff801014ce98
RSP: 0xffffff80e7e43200, RBP: 0xffffff80e7e43280, RSI: 0x0000000000000000, RDI: 0x00000000001a13f4
R8: 0x0000000000000000, R9: 0xffffff800cd25000, R10: 0x00000000001b2fff, R11: 0x0000000000000000
R12: 0x8000000000000000, R13: 0x0000000000000000, R14: 0xffffff801014ce80, R15: 0x000000000668f000
RFL: 0x0000000000010246, RIP: 0xffffff80002aaae2, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000000645e000, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80e7e42eb0 : 0xffffff8000220792
0xffffff80e7e42f30 : 0xffffff80002c473a
0xffffff80e7e430e0 : 0xffffff80002da0cd
0xffffff80e7e43100 : 0xffffff80002aaae2
0xffffff80e7e43280 : 0xffffff80002adbd4
0xffffff80e7e432a0 : 0xffffff800026740e
0xffffff80e7e432d0 : 0xffffff800026804b
0xffffff80e7e436d0 : 0xffffff8000268448
0xffffff80e7e43730 : 0xffffff8000571351
0xffffff80e7e43780 : 0xffffff80002ff905
0xffffff80e7e437d0 : 0xffffff80002ff59e
0xffffff80e7e43810 : 0xffffff8000301996
0xffffff80e7e438a0 : 0xffffff80004ddf0c
0xffffff80e7e43990 : 0xffffff80004fe325
0xffffff80e7e43ae0 : 0xffffff80005010d5
0xffffff80e7e43b40 : 0xffffff800031ccbd
0xffffff80e7e43bb0 : 0xffffff800030b9c8
0xffffff80e7e43da0 : 0xffffff800030bdad
0xffffff80e7e43f60 : 0xffffff80005ccfe8
0xffffff80e7e43fb0 : 0xffffff80002da5e9
BSD process name corresponding to current thread: Google Chrome
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 21950465015381
last loaded kext at 21384906305176: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f81322000, size 57344)
loaded kexts:
com.bresink.driver.BRESINKx86Monitoring 9.0
com.apple.filesystems.msdosfs 1.7.1
com.apple.driver.AppleUSBCDC 4.1.17
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.0f3
com.apple.driver.AppleHDA 2.2.0f3
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.5f11
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d0
com.apple.driver.AppleLPC 1.5.8
com.apple.driver.AppleMikeyDriver 2.2.0f3
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleBacklight 170.1.9
com.apple.GeForce 7.1.8
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.5f11
com.apple.driver.AppleUSBTCKeyEventDriver 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.iokit.SCSITaskUserClient 3.2.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.3
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 530.4.20
com.apple.driver.AppleUSBHub 4.5.0
com.apple.nvenet 2.0.17
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.0
com.apple.driver.AppleUSBOHCI 4.4.5
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.8
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 193.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.3
com.apple.driver.AppleIntelCPUPowerManagement 193.0.0
com.apple.driver.DspFuncLib 2.2.0f3
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc17
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.IOPlatformPluginLegacy 5.0.0d0
com.apple.driver.IOPlatformPluginFamily 5.1.0d17
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.1.8
com.apple.NVDAResman 7.1.8
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.triggers 1.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleSMC 3.1.3d8
com.apple.driver.AppleHDAController 2.2.0f3
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.iokit.IOHDAFamily 2.2.0f3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.5f11
com.apple.iokit.IOBluetoothFamily 4.0.5f11
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.0
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.0
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.5
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.6
com.apple.iokit.IOStorageFamily 1.7.1
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 3.06 GHz, 8 GB, SMC 1.48f2
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x393930353432382D3031322E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.198.4.20)
Bluetooth: Version 4.0.5f11, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: SAMSUNG HM501II, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 5
Any help at all or new fixes I could try would be greatly appreciated! Very frustrating!Cheers - I've run Rember a few times and it hasn't come up with any errors, but I've heard it's not a 100% accurate test. Looks like that's the only thing left it could be!
Maybe you are looking for
-
How a procedure is compiled in oracle ? (implicit and explicit compilation)
how a procedure is compiled in oracle ? (implicit and explicit compilation)
-
I have some issues with the Shell UI language of Office 2013 via App-V 5.0 (SP2). The Shell UI language is German, I want it in English. Package was created using the latest ODT version (Office Deployment Tool for Click-to-Run, 2/25/2014). 1. setup.e
-
Is it possible to have bookmarks that will auto-login to two different gmail and facebook accounts?
Right now I have separate user accounts for my wife and I, merely for the reason of keeping our bookmarks separate. Its forced us to come up with the usual workarounds for sharing iTunes, iPhoto, etc, and multi-users for us is only useful for keepin
-
Serious Problem using function
Hello mates, I new to Oracle JDBC and im working on a project that uses Oracle as DB. There are some stored procedures and functions that i have to access , but some of them are getting me nervous. The problem is that when i call a simple function re
-
Commit performance on table with Fast Refresh MV
Hi Everyone, Trying to wrap my head around fast refresh performance and why I'm seeing (what I would consider) high disk/query numbers associated with updating the MV_LOG in a TKPROF. The setup. (Oracle 10.2.0.4.0) Base table: SQL> desc action; Name