My g5 having issues, red light coming on behind power button

an overview, i tried to install an airport adapter and some ram and went to turn it on, and it runs, i think it even chimmed but the monitor isnt registering the grey screen, but it is registering that it is connected as it isnt the video card or at least i dont think it is.
I did buy an agp nvidia 6200 card as well and swapped it in to try, and no go, swapped the old one back and still nothing.
what is the red light indicating?
it has 10.3 on it, dont have the disc since i opted for the computer on ebay
Message was edited by: neliconcept

From what I've picked up it seems the larger sticks of RAM should be placed in the inner slots, going outward. I'd try reseating the RAM making sure you hear that little snap of them seating then try starting up again. If it still balks, shut down and reset your PMU and see if that forces your mac to recognize the RAM. Of course there might be a bad stick in there and that's what's throwing it off. Good luck. http://support.apple.com/kb/HT1436

Similar Messages

  • Red light coming from my audio output, speakers not working

    I read somewhere about wiggling a toothpick around in there, but that didn't work, any other ideas.
    This happened after I had a 1/4 to 1/8 converter plugged in there to use a little mini amp.
    I've lost the use of speakers.
    headphones work fine
    I think the optical input is still reading as if something is plugged in. Not sure if there's something in my system I need to switch, or if I need to take it in, have the jack opened up and replaced

    Just to rule out the obvious make sure your mute switch (F3) is not on. If your 'switch is stuck' you would see a red light coming from the headphone port.
    Double check your Sys Prefs - Sound settings ...if things still are not working you might try a SMC reset followed by a Pram reset that would restore your orig. settings.

  • Output speakers do not work, have a red light coming out of my headph. jack

    My headphone jack works but theres a red light coming out of my headphone jack when its unplugged and my internal speakers will not work...anybody have an idea? Tried system preferences and says no options for selected audio and cant get any sound for my built in output speakers and my volume display in my bar is faded....HELP!

    @Spencer
    I know this thread was marked answered but thought I should chime in since my MBP (2.66Ghz Late '08, bought May '09) started to exhibit this behavior. I was getting "No Output" greyed out speaker images and the red light coming out from the headphone jack. It's been intermittent but finally wouldn't go away so I figured I'd contact Appe.
    This afternoon I called Applecare and was advised to take it to the Apple store... no questions asked, no troubleshooting steps, just told me to take it to the store and even offered to make me an appt. I was able to get an appointment at the genius bar same day (literally 2 hours after I hung up the phone). My wife took a ride with me and we headed down there.
    When I showed the technician she tested it and then went to the back room to double check something. When she came back she told me that it was hardware related and needed to be sent in for service. I am under warranty so it was no skin off my back but I will need to be without the machine for a few days.
    I agree with Rod to take it in, esp. if you're still under warranty. I should also mention that this only started happening a few weeks ago but the red light part was rather sudden.
    Good luck!

  • HT2494 the sound won't work on my Macbook pro  the headphone port actually has a red light coming from it

    Can not get sound on my Computer.  The headphone port actually has a red light coming from it.  Help

    Insert a headphone jack and remove it and see if the light goes out. The red light indicates the switch didn't switch from head phone to your Mac's speakers. Some folks have actually used a match stick to undo the switch.

  • Red light coming from the headphone port

    does anybody know why there is a red light coming from the headphone port.
    This is after i reformatted 
    Thanks
    Moderator note; subject edited for relevancy

    This is perfectly normal. You can run an optical digital out this way. You need a mini-toslink adapter like this:
    http://en.wikipedia.org/wiki/Mini-TOSLINK
    Then you can set the digital out as default (instead of Speakers) to run audio to a surround sound reciever via optical fiber.

  • Internal speakers suddenly will not unmute.  My headphones work, and there is a red light coming from the headphone jack

    I put my volume on mute a few weeks ago, and I don't know if I have used it again since then or not, but now the volume will not unmute.  There is a red light glowing out of the headphone jack.  Sound through headphones works.  I've tried updating and restarting my computer.  Help?

    No, not forceful - gentle.
    A PRAM-reset might also help:
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    Try this a few times.
    Stefan

  • Found white powder in earphone connection and sound doesn't work, red light coming thru hole

    I found a white powder accumulating in the earphone port which after cleaning out delicately, the sound on the computer is grayed off and a redlight comes thru the hole...what is happening, please help, thank you

    It sounds as if you're 'stuck' in optical output mode. The usual 'fix' for this is to gently clean the port with a toothpick, until the red light goes out.
    No idea what the white powder might be - you haven't spilled something around the port, have you?
    Clinton

  • Is the red light coming from the top on my iphone normal ?

    Red light on top of iphone !

    That would be the proximity or brightness sensor and is normal to see in extremely dark environments.

  • Audio muted/disabled- red light coming out of jack????

    what the heck? anyone know what's going on here? red light in my headphone jack and volume control non-operational. reset the PRAM to get speakers working for a moment before problem returned. works fine when headphones in, but not without.
    and the red light shining out... what IS that?

    Hey all-
    I've worked on laptops before and didn't feel comfortable sticking a metal clip into it. I did snap the end off a Q-tip and wiggled the cardboard ever so gingerly and it went off. BUT later in the week the same problem occurred. I've got an appointment with Apple tomorrow and will keep you up to date on the "official word" with this problem. I'm still in the year warranty period (refurbished pruchased, year up in November) so they should replace anything that is failing this soon in the game.
    Have a co-worker that just had a new MBP's video fail after less than a month of use---Apple replaced the whole machine, but only because it was in the first 30 days of purchase. Doubt they'll make me the same kind of offer. Still sorta miffed to have problems with my newest machine. Never had to get AppleCare, but think I'll have to with this guy... hope it's not IceBook Logic board blues for these first Intel offerings.

  • Canopus Import Issue - Red Light, Yellow Light?!

    Canopus ACEdvio
    So I am importing DVD footage through S-Video and between FCP, iMovie, Quicktime Pro... whatever I get this problem
    The video looks clear then its dark and blurry for about 15 seconds, then its clear, then its blurry and so on.
    Anyways, its annoying and I cant properly capture DVD through S-Video. Here is the confusing part, it only happened on 2 of my 3 DVD's. It hasnt done this before.
    Inside the G5, I see the Canopus card and a yellow light is on when its clear and a red light is on when its blurry.
    PLEASE HELP!

    Is that what that is? Is there any way around that? I am trying to edit a project for school.

  • TS2634 Having issues with touch screen selecting keys and buttons I don't touch

    I'm having issues when messaging or using the browser with the key pad it will jump up and down the screen,  select buttons I don't want or the wrong messages. It basically wigs out at times, usually when I'm charging it, or listening to a radio station and trying to message at the same time. Any suggestions on why this is happening or how to fix it?

    thana88,
    Sorry to hear that you have had multiple service events, and yet problems persist.
    Please send me a private message with your contact information - name, phone number and the type / serial number of your flex 14.  If you have any of the service case numbers, please include these as well..
    We can work to escalate this
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Support issue with X230 problem charing and power button stuck.

    My X239 is not charing to the full 100%, I have two other Thinkpad models that my parents and they all change to 100%.. This is newer than theirs. Also the power button on the laptop is not flexing enough, you wont fee if you are pressing it. I send this for repair twice and its not fixed yet.I wonder the support tech read the whole desciption of the trouble or just goes by the category of the trouble. I like to talk to someone to make sence but its all automated. I am so much dissatisfied with their service and the product itself.

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that battery of your Lenovo ThinkPad X230 is not charging to 100% and the power button is stuck.
    I would suggest you to follow the below troubleshooting steps.
    Shutdown, unplug AC and remove battery. Press and hold power button for several seconds. Then re-install battery and AC and restart and see.
    Download latest Power Manager and Power Management driver.
    Uninstall Power Manager and Power Management driver that is already installed.
    Reboot the laptop
    Install Power Manager and Power Management driver
    Reboot laptop again and see if helps.
    Go to Power manager -> Battery tab in advanced view -> Battery maintenance -> Select always fully charge ->Ok and restart the system.
    Ensure that the system is plugged-in and that battery firmware is up-to-date.  Check the Lenovo support site for any battery firmware updates for your particular model.  Perform battery gauge reset.  This will allow the battery to relearn available capacity. Update BIOS to the latest level.
    Regarding the power button, you may have to disassemble the system and reseat the button. Refer hardware maintenance manual to perform disassembly of the system. Otherwise, you may have to report the issue to Lenovo technical support again. Sorry for the inconvenience.
    Please post back with the results!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Cinema Display Power Light Suddenly Not On & Power Button Not Responding

    So, I've had major problems with my G5 which Apple diagnosed as being the board (and then the video card etc...). They gave me a $700 credit towards a new machine (I got a new MacBook Pro) but before I put the old G5 up for sale I wanted to try pulling some of the RAM to see if the problem was just faulty RAM. I pulled a gb from OWC I put in after purchasing the machine. Pressed power and I got the start-up chime which I haven't been able to get forever, AND the fans didn't go into turbo mode like it did before. BUT, my display which I had left plugged in for the last 6 months and whose power button has been continually lit up with the machine unplugged.......now won't light. What happened? Please HELP!!!

    Happened to me last week and I did eveything possible to investigate if my power unit was broken, cable damaged, fuse blown etc.  In the end I simply reset the PRAM and as if by magic the Cinema Disply came back.  Touch wood it has been alright since.  http://support.apple.com/kb/HT1379?viewlocale=en_US

  • HT4211 I have two phones with verizon and we keep having issues with texts coming in on the wrong phones

    We have two phones that are on verizon, share icloud, and all of a sudden, our phones keep having our texts sent to the other phones.  we recently switched service from at&t.  It happened early on, and now it's happening again.  What do we need to do for this to stop happening?

    That's because you are using the same iCloud account for iMessage on both phones. The best way to resolve it is to log out of iCloud in Settings/Messages on ONE of the phones, and create a new iCloud account just for that phone and iMessage. Leave your other settings sharing the iCloud ID so you can share music and apps, and can trace both phones with Find my iPhone.
    The alternative is to go to Settings/Messages and change the addresses in "Send & Receive" so they are different for the 2 phones.

  • I have been experiencing a red light coming out the audio jack and no audio coming out of my Mid 2009 13.3" Macbook pro. I was wondering if Applecare would cover whatever this is?. I am covered until september 2012. Thanks

    Can anyone help?

    It should be covered. Contact Apple support
    <http://www.apple.com/support/contact/>
    for options available to you, or take your Mac to an Apple Authorized Service Provider.

Maybe you are looking for

  • "The disk could not be read or written to."

    When i try to update my ipod, a window pops up that says "Ipod cannot be updated. The disk could not be read from or written to." What does this mean and how can i fix it?? please help!

  • Configuring firefox and IE in DreamWeaver

    You view website by clicking link below: http://killerarcadegames.com/games.html If have IE and Firefox you can see the problem. In Firefox i looks what it suppose to look like but in IE the tabs are all messed up. I remember making the mistake when

  • Invoice List, via EDI

    Hi, We are trying to create an IDOC for our INVOICE LIST,by using the function module IDOC_OUTPUT_INVOIC but is failling to popuplate IDOC segments with the line item data. The function module seem not ready to read the structure of INVOICE LIST, bec

  • Filter with "AND", and not with "OR"?...

    Hello. When I am in my pictures folder, if I click on two keywords (say "A" and "B"), it will give me all of the pictures where "A" is tagged OR all of the pictures where "B" is tagged. So, if I have 12 "A" pictures and 10 "B" pictures, but only 5 pi

  • How to link CRMD_ORDERADM_H and CRMD_ORDERADM_I

    Hi, I am new to CRM and I am not sure how to use the two tables CRMD_ORDERADM_H and CRMD_ORDERADM_I. What is the relation between the two tables? Can i use the GUID in CRMD_ORDERADM_H to get details from CRMD_ORDERADM_I? I am not sure how to link the