My G7-2010nr sound is fine, but microphone input does not record

I need the microphone for Skype calls. Very much appreciate your help.
John

Hey John,
Welcome to the HP Forums!
As your microphone is not working with Skype, you should first follow through the steps in the document Resolving Microphone and Line-in Problems (Windows 7). This will make sure that the hardware is working properly.
If the hardware is working, and you are able to use the mic in a different program, the issue is most likely with Skype. I have also included a link to How do I adjust the sound settings on my computer and in Skype for Windows 7?.
Please let me know the outcome of the troubleshooting steps.
Best of Luck!
I worked on behalf of HP

Similar Messages

HT4641 Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Im trying to print off my cv, page 1 prints off fine but page 2 does not, I'm using the selected template for curriculum vitae why does my page 2 not print?

Hi @kots
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet M2727 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Back in Dec I updated Itunes, with the new version, my IPHONE now I can no longer sync to Itunes. I have an IPOD that works fine but the IPHONE does not. What can I do?

Back in Dec I updated to the new version of Itunes. Since then, I can no longer sync my IPHONE. I have an IPOD that works fine, but the phone is not found on Itunes. I am abled to download pictures to my computer, but I can not sync my music. What can I do?

Click here and install the software.
(71121)

I have a Mac OS 10.6.7 that will not activate the scanner option on a C7280 HP All in One Printer, Fax, Scanner - the Printer works fine but the scanner does not - any suggestions?

I have a Mac OS 10.6.7 that will not activate the scanner portion of an HP C7280 All in One - prints fine - but won't activate scanner.

I have the same problem with an HP Scanjet 8250 and my Epson Stylus NX400. I have reloaded allegedly updated drivers. I have researched using SANE. Neither scanner wants to work since the OS X10.6 update. I have found very little out there about this problem.
Can anyone help me make these bricks work? Really would like a solution that won't cost me hundreds to replace the equipment. Thanks so much.

Wireless network works fine but Ethernet connection does not

Airport Extreme base station connected to DSL line connects perfectly with remote Macs. However, the hardwired Ethernet connection to my G4 is not recognized. When I connect the DSL modem to the G4 using an Ethernet cable, it works perfectly. Genius at the Apple store replaced my AP Extreme base station to no avail. Can anyone suggest what I should check for?

I have seen this exact problem when attempting to configure his iMac through Ethernet to a D-Link Router and an iBook with Airport Extreme (wirelessly) to the D-Link. The D-Link was connected to a DSL modem. The symptoms were that the wireless connection was working perfectly, but the iMac was unable to connect through Ethernet. I worked for hours trying to eliminate every possible issue. Finally, called D-Link for support and discovered the problem. I had configured the D-Link through the iBook for connection. Consequently, with it was necessary to change the iMac connection to DHCP, otherwise the logon attempt was redundant. After a fews of frustration, the lesson was thoroughly learned.

What can be done to correct slow video or freezing in Adobe Premiere Elements 12? Sound plays fine but the video is too slow to even start a project.

Sound plays fine but the video is too slow to even start a project.

film78
On what computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 yet? If not, please do so by using an opened project's Help Menu/Update.
Not enough information in order to help you.
Looking for
1. Properties of source media (including file extension and brand/model/settings of camera that recorded the video).
2. Is problem restricted to one particular file in one particular project? What happens if you start a new project? What is the
duration and size of the project when performance is slow and freezing sets in? What are you doing in the program when this happens?
3. Using a pen and tablet device instead of a mouse?
4. Does problem exist if antivirus and firewall(s) are disabled?
5. Please describe computer environment, including dating on video card/graphics card driver version. Did you install the program to the
default Local Disk C? Where are the Scratch Disks directed and how much free space there?
Lots more questions, but let us start here and then decide what next based on your reply.
Thank you.
ATR

I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear

I have burned a CD and the first 1/2 of the songs sound fine but the rest are not clear, they have a skipping sound to them. I have erased teh CD-RW and tried again and it was somewhat better but the last few songs did the same thing.

Jennann,
First of all, it is better to use CD-Rs than CD-RWs, as the latter often give problems when used for audio CDs.
The problem you describe -- bad audio on the later tracks of an audio CD -- can almost always be corrected by doing the burn at a much lower burn speed. Use 2x.
The burn speed is selected in the dialog box that comes up when you request the burn. It defaults to "Maximum Possible," but there is a dropdown to select a lower value.

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

Hi there,
Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
Recovery Mode and Restore - Apple
Let me know if this helps,
Nathan

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

Are you connecting your iPhone directly to your PC or to a USB hub?

Unable to sync my movies in the i tunes 11 library i try to add the mp4 video by using the add to library option but the movie does not sync while the music is syncing fine...

i am unable to sync my movies in the i tunes 11 library i try to add the mp4 video by using the add to library option but the movie does not sync while the music is syncing fine...

I had the same issue. What I did was save the movies on a thrid-party app like Download Manager Lite. Once downloaded, go back to itunes, go to your iDevice, go to apps and transfer the app, then scroll down and click on the app and from there you can send the movies to that app and WILL play. Can only hold up to 8 videos/movies (this is for iPod Touch 3G or better, iPhone 3s or better, iPad requires iOS 4.3 or better)
YES THIS APP SUPPORTS .mp4
From other ipod (nano, classic): I don't remember.
If your just putting them on iTunes, it should show and play on iTunes no problem.
Message was edited by: keeferaf

Trying to download image files into lightrrom 5 on an imac running 10.8.5. Works fine with camera roll section but Icloud section does not appear as source in lightroom. How to access?

Trying to download image files into lightrrom 5 on an imac running 10.8.5. Works fine with camera roll section but Icloud section does not appear as source in lightroom. How to access?

You need to sync them in iTunes and download them there, then simply open them from the folder where they are stored in other programs.
Mylenium

I'm having trouble recording a bass to go along with a recording I dropped into GB. I'm using an interface and I can hear the bass line, I've clicked on the 'record' button, but the sound does not record. What am I missing?

I have the bass connected to my imac with an interface.
I can hear the bass and I've clicked on the 'record' button, but the sound does not record.
Am I missing something ?
Please advise.
Mike

Double check all your audio settings.
System Preferences --> Sound --> Input should be set to your audio interface.
GB --> Preferences --> Audio/MIDI --> Input should be set to your audio interface.
With your track selected, open the Track Info pane, and select the Edit tab. Under input make sure that Mono 1 or 2 is selected (which number will depend on which input you plugged your bass cable into).

Root device mounted successfully, but /sbin/init does not exist ???

I'm having the issue where when I boot after doing a fresh install, it gives me:
ERROR: Root device mounted successfully, but /sbin/init does not exist
Bailing out, you are on your own. Good luck
sh: can't access tty; job control turned off
[rootfs /]#
My fstab:
# /etc/fstab
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda1 LABEL=homerroot
UUID=877deab9-624d-4e1d-90a1-ccc1d6ebc0c6 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=homerboot
UUID=77835da5-8a38-44c1-bf27-bb657df4484b /boot ext4 rw,relatime,data=ordered 0 2
# /dev/sda3 LABEL=homeretc
UUID=8a1b5bd8-b147-41e0-87df-70a4a9e12df2 /etc ext4 rw,relatime,data=ordered 0 2
# /dev/sda4 LABEL=homervar
UUID=8eb2e7b1-cdf1-46ce-9dc1-439d002bfae4 /var ext4 rw,relatime,data=ordered 0 2
# /dev/sda5 LABEL=homerusr
UUID=bce162b4-d27f-450c-a0e6-4d3ebc6242dc /usr ext4 rw,relatime,data=ordered 0 2
# /dev/sda6 LABEL=home
UUID=62de76ab-b6d4-4e3d-a423-c287b81813a9 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sda7 LABEL=public
UUID=d98a9c8e-2301-4e66-8c7f-26167633a4b0 /public ext4 rw,relatime,data=ordered 0 2
This looks fine to me, but when /dev/sda1 is mounted at /new_root, none of the other devices are mounted....
I don't know if this is what's causing the problem since /etc, and /usr are on separate partitions from root, but
this would be the first time I get a problem dividing things this way (on ubuntu, mint, fedora, et cetera).
So I tried:
https://bbs.archlinux.org/viewtopic.php … 3#p1283343
I get "* is owned by filesystem 2013.05-2" for all three dirs from step three.
None of the other steps have any effect....
I also tried:
https://bbs.archlinux.org/viewtopic.php?id=172943
My /dev/sda1 mounts to new_root, so I don't think I'm having his problem.
And:
https://bbs.archlinux.org/viewtopic.php?id=166423
I reinstalled systemd-sysvcompat, and I'm sure that's not my problem.
Interestingly enough, /usr/lib/systemd/systemd is an elf file on my target hard disk.
Is this an outdated issue or something? Or should /usr/lib/systemd/systemd be a text file?
Thanks in advance for your help guys!

WorMzy wrote:Oh, and /usr/lib/systemd/systemd is supposed to be an ELF binary. Not sure why you think it should be a text file.
I saw another thread saying that adding an entry there would help. I think it was "init=<something>".
WonderWoofy wrote:A separate /etc is not supported whatsoever. There needs to be initial access to a few things there. I'm sure it could be made to work with some initramfs hackery. But it is neither supported or wise to do so IMO.
I'll not do the separate partitions then. Thanks. I'll check back if it works/doesn't-works.

I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. Wha.

I got iPhoto '11, version 9.2.3 and want to edit photos using Photoshop elements 10. I have put P'shop 10 as the preferred editor... but when I click on the photo in iPhoto the Adobe p'shop 10 program opens BUT the picture does not open for editing. What the heck... I did fine with the old iPhoto and "Shop elements 6... .

Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN

My G7-2010nr sound is fine, but microphone input does not record

Similar Messages

Maybe you are looking for